For example, I need this lately in my CI config:
LIT_XFAIL_NOT='libomptarget :: nvptx64-nvidia-cuda :: unified_shared_memory/api.c'
That test specifies an XFAIL directive, but I get an XPASS result.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D106022
The new documentation entry gives an example use case from
libomptarget.
Reviewed By: yln, jhenderson, davezarzycki
Differential Revision: https://reviews.llvm.org/D105208
This patch augments Lit with the ability to parse regular expressions
in boolean expressions. This includes REQUIRES:, XFAIL:, UNSUPPORTED:,
and all other special Lit markup that evaluates to a boolean expression.
Regular expressions can be specified by enclosing them in {{...}},
similarly to how FileCheck handles such regular expressions. The regular
expression can either be on its own, or it can be part of an identifier.
For example, a match expression like {{.+}}-apple-darwin{{.+}} would match
the following variables:
x86_64-apple-darwin20.0
arm64-apple-darwin20.0
arm64-apple-darwin22.0
etc...
In the long term, this could be used to remove the need to handle the
target triple specially when parsing boolean expressions.
Differential Revision: https://reviews.llvm.org/D104572
This is an attempt to fix clang test failures due to 'nonportable-include-path'
warnings on Windows when a path to llvm-project's base directory contains some
uppercase letters (excluding a drive letter).
The issue originates from 2 problems:
* discovery.py loads site config in lower case causing all the paths
based on __file__ and requested within the config file to be in lowercase as well,
* neither os.path.abspath() nor os.path.realpath() (both used to obtain paths of
config files, sources, object directories, etc) do not return paths in the correct
case for Windows (at least consistently for all python versions).
As os.path library doesn't seem to provide any relaible way to restore
the case for paths on Windows, this patch proposes to use pathlib.resolve().
pathlib is a part of Python 3.4 while llvm lit requires Python 3.6.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D103014
In such cases, the executables are not in the llvm_tools_dir directory, so we need to look in the other search locations. Previously, they were found via the PATH, but this was disabled by default in commit rGa1e6565.
Depends on D103154.
Reviewed By: thopre
Differential Revision: https://reviews.llvm.org/D103156
The pipes.quote function quotes using single quotes, the same goes
for the newer shlex.quote (which is the preferred form in Python 3).
This isn't suitable for quoting in command lines on Windows (and the
documentation for shlex.quote even says it's only usable for Unix
shells).
In general, the python subprocess.list2cmdline function should do
proper quoting for the platform's current shell. However, it doesn't
quote the ';' char, which we pass within some arguments to run.py.
Therefore use the custom reimplementation from lit.TestRunner which
is amended to quote ';' too.
The fact that arguemnts were quoted with single quotes didn't matter
for command lines that were executed by either bash or the lit internal
shell, but if executing things directly using subprocess.call, as in
_supportsVerify, the quoted path to %{cxx} fails to be resolved by the
Windows shell.
This unlocks 114 tests that previously were skipped on Windows.
Differential Revision: https://reviews.llvm.org/D103310
This updates the googletest format to support tests that use GTEST_SKIP(),
which is now available with the updated googletest framework.
Differential Revision: https://reviews.llvm.org/D102694
This allows tests to detect whether to run or not, dependent on which
LLD version is required for the test.
Reviewed by: thopre
Differential Revision: https://reviews.llvm.org/D101997
This patch stops lit from looking on the PATH for clang, lld and other
users of use_llvm_tool (currently only the debuginfo-tests) unless the
call explicitly requests to opt into using the PATH. When not opting in,
tests will only look in the build directory.
See the mailing list thread starting from
https://lists.llvm.org/pipermail/llvm-dev/2021-May/150421.html.
See the review for details of why decisions were made about when still
to use the PATH.
Reviewed by: thopre
Differential Revision: https://reviews.llvm.org/D102630
Currently, if the user specifies the environment variable 'CLANG', tests
will attempt to use the value as a path to the clang executable.
Previously, lldb could also be specified via the CLANG environment
variable, but this was almost certainly a bug, because that meant both
clang and lldb would have the same path. This patch changes the
environment variable for lldb to 'LLDB'.
Reviewed by: thopre, teemperor
Differential Revision: https://reviews.llvm.org/D101982
At 61 or over, I see messages like
File "...\Python\Python39\lib\multiprocessing\connection.py", line 816, in _exhaustive_wait
res = _winapi.WaitForMultipleObjects(L, False, timeout)
ValueError: need at most 63 handles, got a sequence of length 64
60 seems to work for me.
If this causes issues for anybody else, feel free to revert.
This reverts commit d319005a3746a7661c8c9a3302266b6ff7cf61be.
Causing messages like:
File "...\Python\Python39\lib\multiprocessing\connection.py", line 816, in _exhaustive_wait
res = _winapi.WaitForMultipleObjects(L, False, timeout)
ValueError: need at most 63 handles, got a sequence of length 74
Revert the 32-process cap on Windows. When testing with Swift, we found
that there was a time reduction for testing with the higher load. This
should hopefully not matter much in practice. In the case that the
original problem with python remains with a high subprocess count, we
can easily revert this change.
Previously, if the search_env argument was specified, and the tool was
found at that location, the path was not reported, unlike other
situations when this function was called. Adding the reporting makes the
function consistent.
Reviewed by: thopre
Differential Revision: https://reviews.llvm.org/D101896
A lit feature guards tests for the lit timeout functionality because on
most system it depends on the availability of the psutil Python module.
However, that feature is defined based on the ability of the testing lit
to cancel test, which does not necessarily apply to the ability of the
tested lit.
In particular, RUN commands have a cleared PYTHONPATH and user site
packages are disabled. In the case where psutil is found by the testing
lit from one of those two source of python path, the tested lit would
not be able to find it, causing timeout tests to fail.
This commit fixes the issue by testing the ability to cancel tests in
the RUN command environment.
Reviewed By: yln
Differential Revision: https://reviews.llvm.org/D99728
This fixes cases where "not not <command>" is supposed to return
only the error codes 0 or 1, but after efee57925c3f46c74c6697,
it passed the original error code through.
This was visible on AIX in the shtest-output-printing.py testcase,
where 'wc' returns 2, while it returns 1 on other platforms, and the
test required "not not" to normalize it to 1.
Keep running "not --crash" via the external "not" executable, but
for plain negations, and for cases that use the shell "!" operator,
just skip that argument and invert the return code.
The libcxx tests only use the shell operator "!" for negations,
never the "not" executable, because libcxx tests can be run without
having a fully built llvm tree available providing the "not"
executable.
This allows using the internal shell for libcxx tests.
It should be possible to reland this now that D99938 fixed the
one test failure in clang-tidy that broke when "not" was handled
internally, letting lit/python execute grep.exe directly instead
of via not.exe. (See D99330 and D99406 for more commentery on the
exact issue that broke and other potential ways of fixing it.)
Differential Revision: https://reviews.llvm.org/D98859
This avoids breaking clang-tidy/infrastructure/validate-check-names.cpp
if 'not' is evaluated as a lit internal tool (making TestRunner
invoke 'grep' directly in that test, instead of invoking 'not', which
then invokes 'grep').
The quoting of arguments is still brittle if the executable is an
MSYS based tool though, as MSYS based tools incorrectly unescape
backslashes in quoted arguments (contrary to regular win32 argument
parsing rules), see D99406 and
https://github.com/msys2/msys2-runtime/issues/36 for more examples
of the issues.
Differential Revision: https://reviews.llvm.org/D99938
Quality of progress bar and ETA in lit has always bothered me.
For example, given `./bin/llvm-lit /repositories/llvm-project/clang/test/CodeGen* -sv`
at 1%, it says it will take 10 more minutes,
at 25%, it says it will take 1.25 more minutes,
at 50%, it says it will take 30 more seconds,
and in the end finishes with `Testing Time: 39.49s`. That's rather wildly unprecise.
Currently, it assumes that every single test will take the same amount of time to run on average.
This is is a somewhat reasonable approximation overall, but it is quite clearly imprecise,
especially in the beginning.
But, we can do better now, after D98179! We now know how long the tests took to run last time.
So we can build a better ETA predictor, by accumulating the time spent already,
the time that will be spent on the tests for which we know the previous time,
and for the test for which we don't have previous time, again use the average time
over the tests for which we know current or previous run time.
It would be better to use median, but i'm wary of the cost that may incur.
Now, on **first** run of `./bin/llvm-lit /repositories/llvm-project/clang/test/CodeGen* -sv`
at 10%, it says it will take 30 seconds,
at 25%, it says it will take 50 more seconds,
at 50%, it says it will take 27 more seconds,
and in the end finishes with `Testing Time: 41.64s`. That's pretty reasonable.
And on second run of `./bin/llvm-lit /repositories/llvm-project/clang/test/CodeGen* -sv`
at 1%, it says it will take 1 minutes,
at 25%, it says it will take 30 more seconds,
at 50%, it says it will take 19 more seconds,
and in the end finishes with `Testing Time: 39.49s`. That's amazing i think!
I think people will love this :)
Reviewed By: yln
Differential Revision: https://reviews.llvm.org/D99073
Even though we have read the times before,
we intentionally forget about it for performance reasons.
But that means we also forget all the times for the tests
that weren't executed this time. This is mildly inconvenient.
So, when recording the new times, first re-read the old times,
and update times for the tests that were executed,
thus preserving all original times, too.
I.e. when you first run lit on a directory, and then on a single test,
the timing knowledge about anything else other than that single test
is lost. This isn't right.
All of these depend on the order of tests, so if one runs them twice,
the tests within them will naturally be reordered
using the previous run times, which breaks them.
If lit was run on a directory that contained no suites,
then naturally suite[0] will not be there,
and that line would cause python warnings.
So just predicate it with a check that it is there in the first place.
This reverts commit d09adfd3993cbc1043b4d20232bce8bd774232cc.
That commit caused failures in
clang-tidy/infrastructure/validate-check-names.cpp on windows
buildbots.
That change exposed a surprising issue, not directly related to
this change in itself, but in how TestRunner quotes command line
arguments that later are going to be interpreted by a msys based
tool (like grep.exe, when provided by Git for Windows). This
worked accidentally before, when grep was invoked via not.exe
which took a more conservative approach to windows argument quoting.
When running in a Windows Container, the Git for Windows Unix tools
(C:\Program Files\Git\usr\bin) just hang if this variable isn't
passed through.
Currently, running the LLVM/clang tests in a Windows Container fails
if that directory is added to the path, but succeeds after this change.
(After this change, the previously used GnuWin tools can be left out
entirely, too, as lit automatically picks up the Git for Windows tools
if necessary.)
Differential Revision: https://reviews.llvm.org/D98858
Keep running "not --crash" via the external "not" executable, but
for plain negations, and for cases that use the shell "!" operator,
just skip that argument and invert the return code.
The libcxx tests only use the shell operator "!" for negations,
never the "not" executable, because libcxx tests can be run without
having a fully built llvm tree available providing the "not"
executable.
This allows using the internal shell for libcxx tests.
Differential Revision: https://reviews.llvm.org/D98859
The "path" recorded for timing purposes is only used as a key into a dictionary. It is never used as an actual path to a filesystem API, therefore we should use '/' as the canonical separator so that Unix and Windows machines can share timing data. This also ensures that the lit testing works across platforms.
Reviewed By: jhenderson, jmorse
Differential Revision: https://reviews.llvm.org/D98767
The test file has embedded slashes. This is fine for normal users that
are just recording and reordering paths, but not great when the trace
data is committed back to a repository that should work on both Unix and
Windows.
Lit as it exists today has three hacks that allow users to run tests earlier:
1) An entire test suite can set the `is_early` boolean.
2) A very recently introduced "early_tests" feature.
3) The `--incremental` flag forces failing tests to run first.
All of these approaches have problems.
1) The `is_early` feature was until very recently undocumented. Nevertheless it still lacks testing and is a imprecise way of optimizing test starting times.
2) The `early_tests` feature requires manual updates and doesn't scale.
3) `--incremental` is undocumented, untested, and it requires modifying the *source* file system by "touching" the file. This "touch" based approach is arguably a hack because it confuses editors (because it looks like the test was modified behind the back of the editor) and "touching" the test source file doesn't work if the test suite is read only from the perspective of `lit` (via advanced filesystem/build tricks).
This patch attempts to simplify and address all of the above problems.
This patch formalizes, documents, tests, and defaults lit to recording the execution time of tests and then reordering all tests during the next execution. By reordering the tests, high core count machines run faster, sometimes significantly so.
This patch also always runs failing tests first, which is a positive user experience win for those that didn't know about the hidden `--incremental` flag.
Finally, if users want, they can _optionally_ commit the test timing data (or a subset thereof) back to the repository to accelerate bots and first-time runs of the test suite.
Reviewed By: jhenderson, yln
Differential Revision: https://reviews.llvm.org/D98179
Visual Studios implementation of the C++ Standard Library does not use strerror to produce a message for std::error_code unlike other standard libraries such as libstdc++ or libc++ that might be used.
This patch adds a cmake script that through running a C++ program gets the error messages for the POSIX error codes and passes them onto lit through an optional config parameter.
If the config parameter is not set, or getting the messages failed, due to say a cross compiling configuration without an emulator, it will fall back to using pythons strerror functions.
Differential Revision: https://reviews.llvm.org/D98278
This patch uses the errno python library to print out the correct error messages instead of hardcoding the error message per platform.
Reviewed By: jhenderson, ASDenysPetrov
Differential Revision: https://reviews.llvm.org/D97472
For some build configurations, `check-all` calls lit multiple times to
run multiple lit test suites. Most recently, I've found this to be
true when configuring openmp as part of `LLVM_ENABLE_RUNTIMES`, but
this is not the first time.
If one test suite fails, none of the remaining test suites run, so you
cannot determine if your patch has broken them. It can then be
frustrating to try to determine which `check-` targets will run the
remaining tests without getting stuck on the failing tests.
When such cases arise, it is probably best to adjust the cmake
configuration for `check-all` to run all test suites as part of one
lit invocation. Because that fix will likely not be implemented and
land immediately, this patch introduces `--ignore-fail` to serve as a
workaround for developers trying to see test results until it does
land:
```
$ LIT_OPTS=--ignore-fail ninja check-all
```
One problem with `--ignore-fail` is that it makes it challenging to
detect test failures in a script, perhaps in CI. This problem should
serve as motivation to actually fix the cmake configuration instead of
continuing to use `--ignore-fail` indefinitely.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D96371
