Wrapper function call and dispatch handler helpers are moved to
ExecutionSession, and existing EPC-based tools are re-written to take an
ExecutionSession argument instead.
Requiring an ExecutorProcessControl instance simplifies existing EPC based
utilities (which only need to take an ES now), and should encourage more
utilities to use the EPC interface. It also simplifies process termination,
since the session can automatically call ExecutorProcessControl::disconnect
(previously this had to be done manually, and carefully ordered with the
rest of JIT tear-down to work correctly).
Eliminating loads/stores in the device code is worth the extra effort,
especially for the new device runtime.
At the same time we do not compute AAExecutionDomain for non-device code
anymore, there is no point.
Differential Revision: https://reviews.llvm.org/D106845
When we simplify at least one operand in the Attributor simplification
we can use the InstSimplify to work on the simplified operands. This
allows us to avoid duplication of the logic.
Depends on D106189
Differential Revision: https://reviews.llvm.org/D106190
Users, especially the Attributor, might replace multiple operands at
once. The actual implementation of simplifyWithOpReplaced is able to
handle that just fine, the interface was simply not allowing to replace
more than one operand at a time. This is exposing a more generic
interface without intended changes for existing code.
Differential Revision: https://reviews.llvm.org/D106189
These tests access private symbols in the backends, so they cannot link
against libLLVM.so and must be statically linked. Linking these tests
can be slow and with debug builds the resulting binaries use a lot of
disk space.
By merging them into a single test binary means we now only need to
statically link 1 test instead of 6, which helps reduce the build
times and saves disk space.
Reviewed By: courbet
Differential Revision: https://reviews.llvm.org/D106464
This change slightly relaxed the current ICP threshold in top-down inliner, specifically always allow one ICP for it. It shows some perf improvements on SPEC and our internal benchmarks. Also renamed the previous flag. We can also try to turn off PGO ICP in the future.
Reviewed By: wenlei, hoy, wmi
Differential Revision: https://reviews.llvm.org/D106588
D106185 allows us to determine if a store is needed easily. Using that
knowledge we can start to delete dead stores.
In AAIsDead we now track more state as an instruction can be dead (= the
old optimisitc state) or just "removable". A store instruction can be
removable while being very much alive, e.g., if it stores a constant
into an alloca or internal global. If we would pretend it was dead
instead of only removablewe we would ignore it when we determine what
values a load can see, so that is not what we want.
Differential Revision: https://reviews.llvm.org/D106188
This patch introduces `getPotentialCopiesOfStoredValue` which uses
AAPointerInfo to determine all "aliases" or "potential copies" of a
value that is stored into memory. This operation can fail but if it
succeeds it means we can visit all "uses" of a value even if it is
temporarily stored in memory.
There are two users for the function:
1) `Attributor::checkForAllUses` which will now ignore the value use
in a store if all "potential copies" can be identified and instead
be visited. This allows various AAs, including AAPointerInfo
itself, to look through memory.
2) `AANoCapture` which uses a custom use tracking through the
CaptureTracker interface and therefore needs to be thought
explicitly.
Differential Revision: https://reviews.llvm.org/D106185
Ensure that libSupport does not carry any static global initializer.
libSupport can be embedded in use cases where we don't want to load all
cl::opt unless we want to parse the command line.
ManagedStatic can be used to enable lazy-initialization of globals.
The -Werror=global-constructors is only added on platform that have
support for the flag and for which std::mutex does not have a global
destructor. This is ensured by having CMake trying to compile a file
with a global mutex before adding the flag to libSupport.
This reverts commit 0a37163d1d855a2db41e1f46ddbc3f4570bd7ca6.
Reason: Broke the sanitizer msan bots. More details are available in the
original Phabricator review: https://reviews.llvm.org/D106814.
Similar to D105787, this patch tries to fold `__kmpc_parallel_level` if possible.
Note that `__kmpc_parallel_level` doesn't take activeness into consideration,
based on current `deviceRTLs`, its return value can be such as 0, 1, 2, instead
of 0, 129, 130, etc. that also indicate activeness.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D106154
While rewriteDeviceCodeStateMachine should probably be folded into
buildCustomStateMachine, we at least need the optimization to happen.
This was not reliably the case in the CGSCC pass but in the Module pass
it seems to work reliably.
This also ports a test to the new kernel encoding (target_init/deinit),
and makes sure we cannot run the kernel in SPMD mode.
Differential Revision: https://reviews.llvm.org/D106345
This caused us to rerun AAMemoryBehaviorFloating::updateImpl over and
over again. Unfortunately it turned out to be hard to reproduce the
behavior in a reasonable way.
If we add a new live edge we need to indicate a change or otherwise the
new live block is not shown to users. Similarly, new known dead ends and
a changed `ToBeExploredFrom` set need to cause us to return CHANGED.
libclang is only built as static library in the GN build at the
moment, which means we now generate a .exports file form a version
script and then link.exe and ld64 inputs from the .exports file
but don't use the version script, but hey.
Enable custom insert_subvector for larger vector types.
This is necessary now that SelectionDAG can attempt v3f64 insert
to v4f64, etc.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D105385
All floating point values in registers are in double precision
representation. In order to materialize the correct single precision
value, we need to convert the APFloat that represents the value
to double precision first.
Reviewed By: amyk, NeHuang
Differential Revision: https://reviews.llvm.org/D106812
This adds support for the case where
WideSize = DstSize + K * SrcSize
In this case, we can pad the G_MERGE_VALUES instruction with K extra undef
values with width SrcSize. Then the destination can be handled via
widenScalarDst.
Differential Revision: https://reviews.llvm.org/D106814
Before MASSV only supported P8 and P9 on AIX ans Linux . This patch proposes
MASSV to add support of P7 and P10 only on AIX too.
Differential: https://reviews.llvm.org/D106678
Ensure that libSupport does not carry any static global initializer.
libSupport can be embedded in use cases where we don't want to load all
cl::opt unless we want to parse the command line.
ManagedStatic can be used to enable lazy-initialization of globals.
The -Werror=global-constructors is only added on platform that have
support for the flag and for which std::mutex does not have a global
destructor. This is ensured by having CMake trying to compile a file
with a global mutex before adding the flag to libSupport.
Use it AArch64 post-legal combiner. These don't always get folded because when
the instructions are created the constants are obscured by artifacts.
Differential Revision: https://reviews.llvm.org/D106776
Dominator trees were previously used for an optimization related to
`wasm.lsda` but the optimization was removed in D97309. Currently
dominators are not doing anything in this pass. Also removes some
`include` lines without which it compiles.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D106811
When Emscripten EH mixes with Emscripten SjLj, we are not currently
handling some of them correctly. There are three cases:
1. The current function calls `setjmp` and there is an `invoke` to a
function that can either throw or longjmp. In this case, we have to
check both for exception and longjmp. We are currently handling this
case correctly:
0c0eb76782/llvm/lib/Target/WebAssembly/WebAssemblyLowerEmscriptenEHSjLj.cpp (L1058-L1090)
When inserting routines for functions that can longjmp, which we do
only for setjmp-calling functions, we check if the function was
previously an `invoke` and handle it correctly.
2. The current function does NOT call `setjmp` and there is an `invoke`
to a function that can either throw or longjmp. Because there is no
`setjmp` call, we haven't been doing any check for functions that can
longjmp. But in that case, for `invoke`, we only check for an
exception and if it is not an exception we reset `__THREW__` to 0,
which can silently swallow the longjmp:
0c0eb76782/llvm/lib/Target/WebAssembly/WebAssemblyLowerEmscriptenEHSjLj.cpp (L70-L80)
This CL fixes this.
3. The current function calls `setjmp` and there is no `invoke`. Because
it is not an `invoke`, we haven't been doing any check for functions
that can throw, and only insert longjmp-checking routines for
functions that can longjmp. But in that case, if a longjmpable
function throws, we only check for a longjmp so if it is not a
longjmp we reset `__THREW__` to 0, which can silently swallow the
exception:
0c0eb76782/llvm/lib/Target/WebAssembly/WebAssemblyLowerEmscriptenEHSjLj.cpp (L156-L169)
This CL fixes this.
To do that, this moves around some code, so we register necessary
functions for both EH and SjLj and precompute some data (the set of
functions that contains `setjmp`) before doing actual EH or SjLj
transformation.
This CL makes 2nd and 3rd tests in
https://github.com/emscripten-core/emscripten/pull/14732 work.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D106525
Nowadays, simplifycfg pass already tail-merges all the ret blocks together
before doing anything, and it should not increase the count of ret's,
so this is dead code.
This fixes an assert firing when compiling code which involves 128 bit
integrals.
This would trigger runtime checks similar to this:
```
Assertion failed: getMinSignedBits() <= 64 && "Too many bits for int64_t", file llvm/include/llvm/ADT/APInt.h, line 1646
```
To get around this, we just saturate those big values.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D105320
Add td definitions and asm/disasm tests for the addex instruction introduced in
ISA 3.0.
Reviewed By: nemanjai, amyk, NeHuang
Differential Revision: https://reviews.llvm.org/D106666
Invalid costs can be used to avoid vectorization with a given VF, which is
used for scalable vectors to avoid things that the code-generator cannot
handle. If we override the cost using the -force-target-instruction-cost
option of the LV, we would override this mechanism, rendering the flag useless.
This change ensures the cost is only overriden when the original cost that
was calculated is valid. That allows the flag to be used in combination
with the -scalable-vectorization option.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106677
This change moves most of `sve-inductions.ll` to non-AArch64 specific
LV tests using the `-target-supports-scalable-vectors` flag, because they're
not explicitly AArch64-specific. One test builds on AArch64-specific
knowledge regarding masked loads/stores, and remains in sve-inductions.ll.
DIEnumerator stores an APInt as of April 2020, so now we don't need to
truncate the enumerator value to 64 bits. Fixes assertions during IRGen.
Split from D105320, thanks to Matheus Izvekov for the test case and
report.
Differential Revision: https://reviews.llvm.org/D106585
This is a followup patch for D105930 to add implicit-def of RM for
mtfsb[01] instructions as per review comments.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D106603
Summary:
There was an unnecessary variable assigned to the information cache when we
only need it in the constructor to extract the function declaration.
