Updating remark API to newer OptimizationDiagnosticInfo API. This
allows remarks to show up in diagnostic yaml file, and enables use
of opt-viewer tool.
Hotness information for remarks (L505 and L751) do not display hotness
information, most likely due to profile information not being
propagated yet. Unsure if this is the desired outcome.
Patch by Tarun Rajendran.
Differential Revision: https://reviews.llvm.org/D36127
llvm-svn: 310763
Summary:
This autoupgrades most of the broadcast intrinsics. They've been unused in clang for some time.
This leaves the 32x2 intrinsics because they are still used in clang.
Reviewers: RKSimon, zvi, igorb
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36606
llvm-svn: 310725
Summary:
Now that we've made all the necessary backend changes, we can add a new
intrinsic which exposes the new capabilities to IR producers. Since
llvm.amdgpu.update.dpp is a strict superset of llvm.amdgpu.mov.dpp, we
should deprecate the former. We also add tests for all the functionality
that was added in previous changes, now that we can access it via an IR
construct.
Reviewers: tstellar, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D34718
llvm-svn: 310399
Summary:
This intrinsic lets us set inactive lanes to an identity value when
implementing wavefront reductions. In combination with Whole Wavefront
Mode, it lets inactive lanes be skipped over as required by GLSL/Vulkan.
Lowering the intrinsic needs to happen post-RA so that RA knows that the
destination isn't completely overwritten due to the EXEC shenanigans, so
we need another pseudo-instruction to represent the un-lowered
intrinsic.
Reviewers: tstellar, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D34719
llvm-svn: 310088
Summary:
Whole Wavefront Wode (WWM) is similar to WQM, except that all of the
lanes are always enabled, regardless of control flow. This is required
for implementing wavefront reductions in non-uniform control flow, where
we need to use the inactive lanes to propagate intermediate results, so
they need to be enabled. We need to propagate WWM to uses (unless
they're explicitly marked as exact) so that they also propagate
intermediate results correctly. We do the analysis and exec mask munging
during the WQM pass, since there are interactions with WQM for things
that require both WQM and WWM. For simplicity, WWM is entirely
block-local -- blocks are never WWM on entry or exit of a block, and WWM
is not propagated to the block level. This means that computations
involving WWM cannot involve control flow, but we only ever plan to use
WWM for a few limited purposes (none of which involve control flow)
anyways.
Shaders can ask for WWM using the @llvm.amdgcn.wwm intrinsic. There
isn't yet a way to turn WWM off -- that will be added in a future
change.
Finally, it turns out that turning on inactive lanes causes a number of
problems with register allocation. While the best long-term solution
seems like teaching LLVM's register allocator about predication, for now
we need to add some hacks to prevent ourselves from getting into trouble
due to constraints that aren't currently expressed in LLVM. For the gory
details, see the comments at the top of SIFixWWMLiveness.cpp.
Reviewers: arsenm, nhaehnle, tpr
Subscribers: kzhuravl, wdng, mgorny, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D35524
llvm-svn: 310087
Summary:
Previously, we assumed that certain types of instructions needed WQM in
pixel shaders, particularly DS instructions and image sampling
instructions. This was ok because with OpenGL, the assumption was
correct. But we want to start using DPP instructions for derivatives as
well as other things, so the assumption that we can infer whether to use
WQM based on the instruction won't continue to hold. This intrinsic lets
frontends like Mesa indicate what things need WQM based on their
knowledge of the API, rather than second-guessing them in the backend.
We need to keep around the old method of enabling WQM, but eventually we
should remove it once Mesa catches up. For now, this will let us use DPP
instructions for computing derivatives correctly.
Reviewers: arsenm, tpr, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D35167
llvm-svn: 310085
Adds function attributes to index: ReadNone, ReadOnly, NoRecurse, NoAlias. This attributes will be used for future ThinLTO optimizations that will propagate function attributes across modules.
llvm-svn: 310061
Summary:
This commit allows matchSelectPattern to recognize clamp of float
arguments in the presence of FMF the same way as already done for
integers.
This case is a little different though. With integers, given the
min/max pattern is recognized, DAGBuilder starts selecting MIN/MAX
"automatically". That is not the case for float, because for them only
full FMINNAN/FMINNUM/FMAXNAN/FMAXNUM ISD nodes exist and they do care
about NaNs. On the other hand, some backends (e.g. X86) have only
FMIN/FMAX nodes that do not care about NaNS and the former NAN/NUM
nodes are illegal thus selection is not happening. So I decided to do
such kind of transformation in IR (InstCombiner) instead of
complicating the logic in the backend.
Reviewers: spatel, jmolloy, majnemer, efriedma, craig.topper
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, n.bozhenov, llvm-commits
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
Differential Revision: https://reviews.llvm.org/D33186
llvm-svn: 310054
This is similar to what we are doing in "regular" SROA and creates
DW_OP_LLVM_fragment operations to describe the resulting variables.
rdar://problem/33654891
llvm-svn: 310014
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
This can come up in ThinLTO & wastes space & makes degenerate IR.
As per the added FIXME, ultimately, local imported entities should hang
off the function and that way the imported entity list on the CU can be
tested for emptiness like all the other CU lists.
(function-attached local imported entities are probably also the best
path forward for fixing how imported entities are handled both in
cross-module use (currently, while ThinLTO preserves the imported
entities, they would not get used at the imported inlined location -
only in the abstract origin that appears in the partial CU created by
the import (which isn't emitted under Fission due to cross-CU
limitations there)) and to reduce the number of points where imported
entities are emitted (they're currently emitted into every inlined
instance, concrete instance, and abstract origin - they should only go
in teh abstract origin if there is one, otherwise in the concrete
instance - but this requires lots of delayed handling and wiring up,
same as abstract variables & subprograms))
llvm-svn: 309354
Summary:
Pointer difference simplifications currently happen only if input GEPs don't have other uses or their indexes are all constants, to avoid duplicating indexing arithmetic.
This patch enables cases with exactly one non-constant index among input GEPs to happen where there is no duplicated arithmetic or code size increase even if input GEPs have other uses.
For example, this patch allows "(&A[42][i]-&A[42][0])" --> "i", which didn't happen previously, if the input GEP(s) have other uses.
Reviewers: sanjoy, bkramer
Reviewed By: sanjoy
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D35499
llvm-svn: 309304
Summary:
This patch moves root-finding logic from DominatorTreeBase to GenericDomTreeConstruction.h.
It makes the behavior simpler and more consistent by always adding a virtual root to PostDominatorTrees.
Reviewers: dberlin, davide, grosser, sanjoy
Reviewed By: dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35597
llvm-svn: 309146
DIImportedEntity has a line number, but not a file field. To determine
the decl_line/decl_file we combine the line number from the
DIImportedEntity with the file from the DIImportedEntity's scope. This
does not work correctly when the parent scope is a DINamespace or a
DIModule, both of which do not have a source file.
This patch adds a file field to DIImportedEntity to unambiguously
identify the source location of the using/import declaration. Most
testcase updates are mechanical, the interesting one is the removal of
the FIXME in test/DebugInfo/Generic/namespace.ll.
This fixes PR33822. See https://bugs.llvm.org/show_bug.cgi?id=33822
for more context.
<rdar://problem/33357889>
https://bugs.llvm.org/show_bug.cgi?id=33822
Differential Revision: https://reviews.llvm.org/D35583
llvm-svn: 308398
Rename the enum value from X86_64_Win64 to plain Win64.
The symbol exposed in the textual IR is changed from 'x86_64_win64cc'
to 'win64cc', but the numeric value is kept, keeping support for
old bitcode.
Differential Revision: https://reviews.llvm.org/D34474
llvm-svn: 308208
This adds support for the new 32-bit vector float instructions of z14.
This includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions, including new LLVM intrinsics.
- Scheduler description support for the instructions.
- Update to the vector cost function calculations.
In general, CodeGen support for the new v4f32 instructions closely
matches support for the existing v2f64 instructions.
llvm-svn: 308195
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
llvm-svn: 308194
Summary:
Currently these methods call ConstantDataVector::getSplatValue which uses getElementsAsConstant to create a Constant object representing the element value. This method incurs a map lookup to see if we already have created such a Constant before and if not allocates a new Constant object.
This patch changes these methods to use getElementAsAPFloat and getElementAsInteger so we can just examine the data values directly.
Reviewers: spatel, pcc, dexonsmith, bogner, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35040
llvm-svn: 308112
Summary:
This patch implements incremental edge deletions.
It also makes DominatorTreeBase store a pointer to the parent function. The parent function is needed to perform full rebuilts during some deletions, but it is also used to verify that inserted and deleted edges come from the same function.
Reviewers: dberlin, davide, grosser, sanjoy, brzycki
Reviewed By: dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35342
llvm-svn: 308062
Summary:
This patch introduces incremental edge insertions based on the Depth Based Search algorithm.
Insertions should work for both dominators and postdominators.
Reviewers: dberlin, grosser, davide, sanjoy, brzycki
Reviewed By: dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35341
llvm-svn: 308054
Summary:
DominatorTreeBase used to have IsPostDominators (bool) member to indicate if the tree is a dominator or a postdominator tree. This made it possible to switch between the two 'modes' at runtime, but it isn't used in practice anywhere.
This patch makes IsPostDominator a template argument. This way, it is easier to switch between different algorithms at compile-time based on this argument and design external utilities around it. It also makes it impossible to incidentally assign a postdominator tree to a dominator tree (and vice versa), and to further simplify template code in GenericDominatorTreeConstruction.
Reviewers: dberlin, sanjoy, davide, grosser
Reviewed By: dberlin
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D35315
llvm-svn: 308040
This is the LLVM part, adding definitions for
void @llvm.hexagon.Y2.dccleana(i8*)
void @llvm.hexagon.Y2.dccleaninva(i8*)
void @llvm.hexagon.Y2.dcinva(i8*)
void @llvm.hexagon.Y2.dczeroa(i8*)
void @llvm.hexagon.Y4.l2fetch(i8*, i32)
void @llvm.hexagon.Y5.l2fetch(i8*, i64)
The clang part will follow.
llvm-svn: 308032
Summary: DominatorTreeBase and related classes used overcomplicated template machinery. This patch simplifies them and gets rid of DominatorTreeBaseTraits and DominatorTreeBaseByTraits, which weren't actually used outside the DomTree construction.
Reviewers: dberlin, sanjoy, davide, grosser
Reviewed By: dberlin, davide, grosser
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35285
llvm-svn: 307953
Summary: Continuing the work from https://reviews.llvm.org/D33240, this change introduces an element unordered-atomic memset intrinsic. This intrinsic is essentially memset with the implementation requirement that all stores used for the assignment are done with unordered-atomic stores of a given element size.
Reviewers: eli.friedman, reames, mkazantsev, skatkov
Reviewed By: reames
Subscribers: jfb, dschuff, sbc100, jgravelle-google, aheejin, efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D34885
llvm-svn: 307854
Summary: Continuing the work from https://reviews.llvm.org/D33240, this change introduces an element unordered-atomic memmove intrinsic. This intrinsic is essentially memmove with the implementation requirement that all loads/stores used for the copy are done with unordered-atomic loads/stores of a given element size.
Reviewers: eli.friedman, reames, mkazantsev, skatkov
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34884
llvm-svn: 307796
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
dependencies between analyses.
This uncovers even more issues with the proxies and the splitting apart
of SCCs which are fixed in this patch. I discovered this while trying to
add more rigorous testing for a change I'm making to the call graph
update invalidation logic.
llvm-svn: 307497
Summary: For interative sample-pgo, if a hot call site is inlined in the profiling binary, we should inline it in before profile annotation in the backend. Before that, the compile phase first collects all GUIDs that needs to be imported and creates virtual "hot" call edge in the summary. However, "hot" is not good enough to guarantee the callsites get inlined. This patch introduces "critical" call edge, and assign much higher importing threshold for those edges.
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: sanjoy, mehdi_amini, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D35096
llvm-svn: 307439
Going through the Constant methods requires redetermining that the Constant is a ConstantInt and then calling isZero/isOne/isMinusOne.
llvm-svn: 307292
Original Patch and summary by Philip Reames.
RewriteStatepointsForGC tries to rewrite a function in a manner where
the optimizer can't end up using a pointer value after it might have
been relocated by a safepoint. This pass checks the invariant that
RSForGC is supposed to establish and that (if we constructed semantics
correctly) later passes must preserve.
This has been a really useful diagnostic tool when initially developing
the rewriting scheme and has found numerous bugs.
Differential Revision: https://reviews.llvm.org/D15940
Reviewed by: swaroop.sridhar, mjacob
Subscribers: llvm-commits
llvm-svn: 307112
Summary:
Add an option to prevent diagnostics that do not meet a minimum hotness
threshold from being output. When generating optimization remarks for
large codebases with a ton of cold code paths, this option can be used
to limit the optimization remark output at a reasonable size. Discussion of
this change can be read here:
http://lists.llvm.org/pipermail/llvm-dev/2017-June/114377.html
Reviewers: anemet, davidxl, hfinkel
Reviewed By: anemet
Subscribers: qcolombet, javed.absar, fhahn, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D34867
llvm-svn: 306912
This is a short-term fix for PR33650 aimed to get the modules build bots green again.
Remove all the places where we use the LLVM_YAML_IS_(FLOW_)?SEQUENCE_VECTOR
macros to try to locally specialize a global template for a global type. That's
not how C++ works.
Instead, we now centrally define how to format vectors of fundamental types and
of string (std::string and StringRef). We use flow formatting for the former
cases, since that's the obvious right thing to do; in the latter case, it's
less clear what the right choice is, but flow formatting is really bad for some
cases (due to very long strings), so we pick block formatting. (Many of the
cases that were using flow formatting for strings are improved by this change.)
Other than the flow -> block formatting change for some vectors of strings,
this should result in no functionality change.
Differential Revision: https://reviews.llvm.org/D34907
Corresponding updates to clang, clang-tools-extra, and lld to follow.
llvm-svn: 306878