This patch fixes .arch_extension directive parsing to handle a wider
range of architecture extension options. The existing parser was parsing
extensions as an identifier which breaks for extensions containing a
"-", such as the "tlb-rmi" extension.
The extension is now parsed as a string. This is consistent with the
extension parsing in the .arch and .cpu directive parsing.
Patch by Cullen Rhodes (c-rhodes)
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D60118
llvm-svn: 357677
Same as G_EXP. Add a test, and update legalizer-info-validation.mir and
f16-instructions.ll.
Differential Revision: https://reviews.llvm.org/D60165
llvm-svn: 357605
The latest MTE specification adds register Xt to the STG instruction family:
STG [Xn, #offset] -> STG Xt, [Xn, #offset]
The tag written to memory is taken from Xt rather than Xn.
Also, the LDG instruction also was changed to read return address from Xt:
LDG Xt, [Xn, #offset].
This patch includes those changes and tests.
Specification is at: https://developer.arm.com/docs/ddi0596/c
Differential Revision: https://reviews.llvm.org/D60188
llvm-svn: 357583
This adds partial instruction selection support for llvm.aarch64.stlxr. It also
factors out selection for G_INTRINSIC_W_SIDE_EFFECTS into its own function. The
new function removes the restriction that the intrinsic ID on the
G_INTRINSIC_W_SIDE_EFFECTS be on operand 0.
Also add a test, and add a GISel line to arm64-ldxr-stxr.ll.
Differential Revision: https://reviews.llvm.org/D60100
llvm-svn: 357518
This improves selection for vector stores into v2s64s. Before we just
scalarized them, but we can just use a STRQui instead.
Differential Revision: https://reviews.llvm.org/D60083
llvm-svn: 357432
This instruction writes a block of allocation tags
and stores zero to the associated data locations.
It differs from STGM by 1 bit and has the same
arguments.
The specification can be found here:
https://developer.arm.com/docs/ddi0596/c
Differential Revision: https://reviews.llvm.org/D60065
llvm-svn: 357397
The STGV/LDGV instructions were replaced with
STGM/LDGM. The encodings remain the same but there
is no longer writeback so there are no unpredictable
encodings to check for.
The specfication can be found here:
https://developer.arm.com/docs/ddi0596/c
Differential Revision: https://reviews.llvm.org/D60064
llvm-svn: 357395
The latest version of the MTE spec added a system
register 'GMID_EL1'. It contains the block size used
by the LDGM and STGM instructions and is read only.
The specification can be found here:
https://developer.arm.com/docs/ddi0596/c
llvm-svn: 357392
This adds support for v2s32 vector inserts, and updates the selection +
regbankselect tests for G_INSERT_VECTOR_ELT.
Differential Revision: https://reviews.llvm.org/D59910
llvm-svn: 357318
This patch fixes an assembler bug that allowed SVE vector registers to contain a
type suffix when not expected. The SVE unpredicated movprfx instruction is the
only instruction affected.
The following are examples of what was previously valid:
movprfx z0.b, z0.b
movprfx z0.b, z0.s
movprfx z0, z0.s
These instructions are now erroneous.
Patch by Cullen Rhodes (c-rhodes)
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D59636
llvm-svn: 357094
Cleanup isAArch64FrameOffsetLegal by:
- Merging the large switch statement to reuse AArch64InstrInfo::getMemOpInfo().
- Using AArch64InstrInfo::getUnscaledLdSt() to determine whether an instruction
has an unscaled variant.
- Simplifying the logic that calculates the offset to fit the immediate.
Reviewers: paquette, evandro, eli.friedman, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D59636
llvm-svn: 357064
This is generally more readable due to the way the assembler aliases
work.
(This causes a lot of test changes, but it's not really as scary as it
looks at first glance; it's just mechanically changing a bunch of checks
for orr to check for mov instead.)
Differential Revision: https://reviews.llvm.org/D59720
llvm-svn: 356954
This is the result of discussions on the list about how to deal with intrinsics
which require codegen to disambiguate them via only the integer/fp overloads.
It causes problems for GlobalISel as some of that information is lost during
translation, while with other operations like IR instructions the information is
encoded into the instruction opcode.
This patch changes clang to emit the new faddp intrinsic if the vector operands
to the builtin have FP element types. LLVM IR AutoUpgrade has been taught to
upgrade existing calls to aarch64.neon.addp with fp vector arguments, and
we remove the workarounds introduced for GlobalISel in r355865.
This is a more permanent solution to PR40968.
Differential Revision: https://reviews.llvm.org/D59655
llvm-svn: 356722
Added subtarget features for AArch64 to use TPIDR_EL[1|2|3] as the TLS base
register, rather than the default TPIDR_EL0.
Patch by Philip Derrin!
Differential revision: https://reviews.llvm.org/D54685
llvm-svn: 356657
This adds pattern matching for the insert+shufflevector sequence so we can
generate dup instructions instead of the current TBL sequence.
Differential Revision: https://reviews.llvm.org/D59558
llvm-svn: 356526
After review comments, it was preferred to not teach MachineIRBuilder about
non-generic instructions beyond using buildInstr().
For AArch64 I've changed the buildCopy() calls to buildInstr() + a
separate addReg() call.
This also relaxes the MachineIRBuilder's COPY checking more because it may
not always have a SrcOp given to it.
llvm-svn: 356396
It uses the generic AArch64_IMM::expandMOVImm to get the correct
number of instruction used in immediate materialization.
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D58461
llvm-svn: 356391
This patch follows some ideas from r352866 to optimize the floating
point materialization even further. It changes isFPImmLegal to
considere up to 2 mov instruction or up to 5 in case subtarget has
fused literals.
The rationale is the cost is the same for mov+fmov vs. adrp+ldr; but
the mov+fmov sequence is always better because of the reduced d-cache
pressure. The timings are still the same if you consider movw+movk+fmov
vs. adrp+ldr will be fused (although one instruction longer).
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D58460
llvm-svn: 356390
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
It splits the login of actual instruction emission away from the logic
that figures out the appropriate sequence on AArch64ExpandPseudo::expandMOVImm.
The new function AArch64_IMM::expandMOVImm, which return the list of the
instructions to materialize the immediate constant, is implemented on a
separated unit because it will be used in a subsequent patch to optimize
floating point materialization.
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D58915
llvm-svn: 356387
Fixes https://bugs.llvm.org/show_bug.cgi?id=35094
The Dead register definition pass should leave alone the atomicrmw
instructions on AArch64 (LTE extension). The reason is the following
statement in the Arm ARM:
"The ST<OP> instructions, and LD<OP> instructions where the destination
register is WZR or XZR, are not regarded as doing a read for the purpose
of a DMB LD barrier."
A good example was given in the gcc thread by Will Deacon (linked in the
bugzilla ticket 35094):
P0 (atomic_int* y,atomic_int* x) {
atomic_store_explicit(x,1,memory_order_relaxed);
atomic_thread_fence(memory_order_release);
atomic_store_explicit(y,1,memory_order_relaxed);
}
P1 (atomic_int* y,atomic_int* x) {
atomic_fetch_add_explicit(y,1,memory_order_relaxed); // STADD
atomic_thread_fence(memory_order_acquire);
int r0 = atomic_load_explicit(x,memory_order_relaxed);
}
P2 (atomic_int* y) {
int r1 = atomic_load_explicit(y,memory_order_relaxed);
}
My understanding is that it is forbidden for r0 == 0 and r1 == 2 after
this test has executed. However, if the relaxed add in P1 compiles to
STADD and the subsequent acquire fence is compiled as DMB LD, then we
don't have any ordering guarantees in P1 and the forbidden result could
be observed.
Change-Id: I419f9f9df947716932038e1100c18d10a96408d0
llvm-svn: 356360
This relaxes some asserts about sizes, and adds an optional subreg parameter
to buildCopy().
Also update AArch64 instruction selector to use this in places where we
previously used MachineInstrBuilder manually.
Differential Revision: https://reviews.llvm.org/D59434
llvm-svn: 356304
Switch BIC immediate creation for vector ANDs from custom lowering
to a DAG combine, which gives generic DAG combines a change to
apply first. In particular this avoids (and x, -1) being turned into
a (bic x, 0) instead of being eliminated entirely.
Differential Revision: https://reviews.llvm.org/D59187
llvm-svn: 356299
Since we can't insert s16 gprs as we don't have 16 bit GPR registers, we need to
teach RBS to assign them to the FPR bank so our selector works.
llvm-svn: 356282
This adds instruction selection support for G_UADDO on s32s and s64s.
Also
- Add an instruction selection test
- Update the arm64-xaluo.ll test to show that we generate the correct assembly
Differential Revision: https://reviews.llvm.org/D58734
llvm-svn: 356214
This re-uses the previous support for extract vector elt to extract the
subvectors.
Differential Revision: https://reviews.llvm.org/D59390
llvm-svn: 356213
This adds support for inserting elements into packed vectors. It also adds
two tests: one for selection, and one for regbank select.
Unpacked vectors will come in a follow-up.
Differential Revision: https://reviews.llvm.org/D59325
llvm-svn: 356182
NFC. Some more preliminary factoring for G_INSERT_VECTOR_ELT.
Also better code-reuse, etc., etc.
Differential Revision: https://reviews.llvm.org/D59323
llvm-svn: 356107
Factor out the vector insert code in `selectBuildVector`. Replace part of it
with `emitScalarToVector`, since it was pretty much equivalent.
This will make implementing G_INSERT_VECTOR_ELT easier.
Differential Revision: https://reviews.llvm.org/D59322
llvm-svn: 356106
Some more refactoring for G_INSERT_VECTOR_ELT.
Factor out the code used to find a lane index from `selectExtractElt`. Put it
into a more general-purpose `getConstantValueForReg` function.
This will be shared with the code for G_INSERT_VECTOR_ELT.
Differential Revision: https://reviews.llvm.org/D59324
llvm-svn: 356101
After r355865, we should be able to safely select G_EXTRACT_VECTOR_ELT without
running into any problematic intrinsics.
Also add a fix for lane copies, which don't support index 0.
llvm-svn: 355871
Overloaded intrinsics aren't necessarily safe for instruction selection. One
such intrinsic is aarch64.neon.addp.*.
This is a temporary workaround to ensure that we always fall back on that
intrinsic. Eventually this will be replaced with a proper solution.
https://bugs.llvm.org/show_bug.cgi?id=40968
Differential Revision: https://reviews.llvm.org/D59062
llvm-svn: 355865
Fixes https://bugs.llvm.org/show_bug.cgi?id=36796.
Implement basic legalizations (PromoteIntRes, PromoteIntOp,
ExpandIntRes, ScalarizeVecOp, WidenVecOp) for VECREDUCE opcodes.
There are more legalizations missing (esp float legalizations),
but there's no way to test them right now, so I'm not adding them.
This also includes a few more changes to make this work somewhat
reasonably:
* Add support for expanding VECREDUCE in SDAG. Usually
experimental.vector.reduce is expanded prior to codegen, but if the
target does have native vector reduce, it may of course still be
necessary to expand due to legalization issues. This uses a shuffle
reduction if possible, followed by a naive scalar reduction.
* Allow the result type of integer VECREDUCE to be larger than the
vector element type. For example we need to be able to reduce a v8i8
into an (nominally) i32 result type on AArch64.
* Use the vector operand type rather than the scalar result type to
determine the action, so we can control exactly which vector types are
supported. Also change the legalize vector op code to handle
operations that only have vector operands, but no vector results, as
is the case for VECREDUCE.
* Default VECREDUCE to Expand. On AArch64 (only target using VECREDUCE),
explicitly specify for which vector types the reductions are supported.
This does not handle anything related to VECREDUCE_STRICT_*.
Differential Revision: https://reviews.llvm.org/D58015
llvm-svn: 355860
AMDGPU target run out of Subtarget feature flags hitting the limit of 64.
AssemblerPredicates uses at most uint64_t for their representation.
At the same time CodeGen has exhausted this a long time ago and switched
to a FeatureBitset with the current limit of 192 bits.
This patch completes transition to the bitset for feature bits extending
it to asm matcher and MC code emitter.
Differential Revision: https://reviews.llvm.org/D59002
llvm-svn: 355839
Summary:
This change change the instrumentation to allow users to view the registers at the point at which tag mismatch occured. Most of the heavy lifting is done in the runtime library, where we save the registers to the stack and emit unwind information. This allows us to reduce the overhead, as very little additional work needs to be done in each __hwasan_check instance.
In this implementation, the fast path of __hwasan_check is unmodified. There are an additional 4 instructions (16B) emitted in the slow path in every __hwasan_check instance. This may increase binary size somewhat, but as most of the work is done in the runtime library, it's manageable.
The failure trace now contains a list of registers at the point of which the failure occured, in a format similar to that of Android's tombstones. It currently has the following format:
Registers where the failure occurred (pc 0x0055555561b4):
x0 0000000000000014 x1 0000007ffffff6c0 x2 1100007ffffff6d0 x3 12000056ffffe025
x4 0000007fff800000 x5 0000000000000014 x6 0000007fff800000 x7 0000000000000001
x8 12000056ffffe020 x9 0200007700000000 x10 0200007700000000 x11 0000000000000000
x12 0000007fffffdde0 x13 0000000000000000 x14 02b65b01f7a97490 x15 0000000000000000
x16 0000007fb77376b8 x17 0000000000000012 x18 0000007fb7ed6000 x19 0000005555556078
x20 0000007ffffff768 x21 0000007ffffff778 x22 0000000000000001 x23 0000000000000000
x24 0000000000000000 x25 0000000000000000 x26 0000000000000000 x27 0000000000000000
x28 0000000000000000 x29 0000007ffffff6f0 x30 00000055555561b4
... and prints after the dump of memory tags around the buggy address.
Every register is saved exactly as it was at the point where the tag mismatch occurs, with the exception of x16/x17. These registers are used in the tag mismatch calculation as scratch registers during __hwasan_check, and cannot be saved without affecting the fast path. As these registers are designated as scratch registers for linking, there should be no important information in them that could aid in debugging.
Reviewers: pcc, eugenis
Reviewed By: pcc, eugenis
Subscribers: srhines, kubamracek, mgorny, javed.absar, krytarowski, kristof.beyls, hiraditya, jdoerfert, llvm-commits, #sanitizers
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D58857
llvm-svn: 355738
This adds instruction selection support for G_EXTRACT_VECTOR_ELT for cases
where the index is defined by a G_CONSTANT.
It also factos out the lane copy opcode selection part into its own function,
`getLaneCopyOpcode`. This is used by both `selectUnmergeValues` and
`selectExtractElt`.
Differential Revision: https://reviews.llvm.org/D58469
llvm-svn: 355344
The code to materialize a mask from a constant pool load tried to use a 128 bit
LDR to load a 64 bit constant pool entry, which was 8 byte aligned. This resulted
in a link failure in the NEON tests in the test suite since the LDR address was
unaligned. This change fixes that to instead emit a 64 bit LDR if the entry is
64 bit, before converting back to a 128 bit register for the TBL.
llvm-svn: 355326
