A more general name might be match-time error propagation. That is,
it's conceivable we'll one day have non-numeric errors that require
the handling fixed by this patch.
Without this patch, FileCheck behaves as follows:
```
$ cat check
CHECK-NOT: [[#0x8000000000000000+0x8000000000000000]]
$ FileCheck -vv -dump-input=never check < input
check:1:54: remark: implicit EOF: expected string found in input
CHECK-NOT: [[#0x8000000000000000+0x8000000000000000]]
^
<stdin>:2:1: note: found here
^
check:1:15: error: unable to substitute variable or numeric expression: overflow error
CHECK-NOT: [[#0x8000000000000000+0x8000000000000000]]
^
$ echo $?
0
```
Notice that the exit status is 0 even though there's an error.
Moreover, FileCheck doesn't print the error diagnostic unless both
`-dump-input=never` and `-vv` are specified.
The same problem occurs when `CHECK-NOT` does have a match but a
capture fails due to overflow: exit status is 0, and no diagnostic is
printed unless both `-dump-input=never` and `-vv` are specified. The
usefulness of capturing from `CHECK-NOT` is questionable, but this
case should certainly produce an error.
With this patch, FileCheck always includes the error diagnostic and
has non-zero exit status for the above examples. It's conceivable
that this change will cause some existing tests to fail, but my
assumption is that they should fail. Moreover, with nearly every
project enabled, this patch didn't produce additional `check-all`
failures for me.
This patch also extends input dumps to include such numeric error
diagnostics for both expected and excluded patterns.
As noted in fixmes in some of the tests added by this patch, this
patch worsens an existing issue with redundant diagnostics. I'll fix
that bug in a subsequent patch.
Reviewed By: thopre, jhenderson
Differential Revision: https://reviews.llvm.org/D98086
Fixed section of code that iterated through a SmallDenseMap and added
instructions in each iteration, causing non-deterministic code; replaced
SmallDenseMap with MapVector to prevent non-determinism.
This reverts commit 01ac6d1587e8613ba4278786e8341f8b492ac941.
Unreachable code should be self-documented as unreachable.
Found by the Rotten Green Tests project.
Differential Revision: https://reviews.llvm.org/D98518
This caused non-deterministic compiler output; see comment on the
code review.
> This patch updates the various IR passes to correctly handle dbg.values with a
> DIArgList location. This patch does not actually allow DIArgLists to be produced
> by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
> Other than that, it should cover every IR pass.
>
> Most of the changes simply extend code that operated on a single debug value to
> operate on the list of debug values in the style of any_of, all_of, for_each,
> etc. Instances of setOperand(0, ...) have been replaced with with
> replaceVariableLocationOp, which takes the value that is being replaced as an
> additional argument. In places where this value isn't readily available, we have
> to track the old value through to the point where it gets replaced.
>
> Differential Revision: https://reviews.llvm.org/D88232
This reverts commit df69c69427dea7f5b3b3a4d4564bc77b0926ec88.
BasicAA stores a reference to LoopInfo inside. This imposes an implicit
requirement of keeping it up to date whenever we modify the IR (in particular,
whenever we modify terminators of blocks that belong to loops). Failing
to do so leads to incorrect state of the LoopInfo.
Because general AA does not require loop info updates and provides to API to
update it properly, the users of AA reasonably assume that there is no need to
update the loop info. It may be a reason of bugs, as example in PR43276 shows.
This patch drops dependence of BasicAA on LoopInfo to avoid this problem.
This may potentially pessimize the result of queries to BasicAA.
Differential Revision: https://reviews.llvm.org/D98627
Reviewed By: nikic
- Previously, https://reviews.llvm.org/D97703 was [[ https://reviews.llvm.org/D98543 | reverted ]] as it broke when building the unit tests when shared libs on.
- This patch reverts the "revert" and makes two minor changes
- The first is it also links in the MCParser lib when building the unittest. This should resolve the issue when building with with shared libs on and off
- The second renames the name of the unit test from `SystemZAsmLexer` to `SystemZAsmLexerTests` since the convention for unittest binaries is to suffix the name of the unit test with "Tests"
Reviewed By: Kai
Differential Revision: https://reviews.llvm.org/D98666
This parallels ConstantDataArray::getRaw() and can be used with ConstantDataSequential::getRawDataValues() in the base class for both types.
Update BuildConstantData{Array,Vector} tests to test the getRaw API. Also removes its unused Module.
In passing, update some comments to include the support for half and bfloat. Update tests to include testing for bfloat.
Differential Revision: https://reviews.llvm.org/D98302
This patch introduces generic x86-64 edge kinds, and refactors the MachO/x86-64
backend to use these edge kinds. This simplifies the implementation of the
MachO/x86-64 backend and makes it possible to write generic x86-64 passes and
utilities.
The new edge kinds are different from the original set used in the MachO/x86-64
backend. Several edge kinds that were not meaningfully distinguished in that
backend (e.g. the PCRelMinusN edges) have been merged into single edge kinds in
the new scheme (these edge kinds can be reintroduced later if we find a use for
them). At the same time, new edge kinds have been introduced to convey extra
information about the state of the graph. E.g. The Request*AndTransformTo**
edges represent GOT/TLVP relocations prior to synthesis of the GOT/TLVP
entries, and the 'Relaxable' suffix distinguishes edges that are candidates for
optimization from edges which should be left as-is (e.g. to enable runtime
redirection).
ELF/x86-64 will be refactored to use these generic edges at some point in the
future, and I anticipate a similar refactor to create a generic arm64 support
header too.
Differential Revision: https://reviews.llvm.org/D98305
This is a patch to add nonnull and align to assume's operand bundle
only if noundef exists.
Since nonnull and align in fn attr have poison semantics, they should be
paired with noundef or noundef-implying attributes to be immediate UB.
Reviewed By: jdoerfert, Tyker
Differential Revision: https://reviews.llvm.org/D98228
D98289 was erroneously reporting `invalid range list offset 0x20110`
instead of `invalid range list table index 0`.
Differential Revision: https://reviews.llvm.org/D98589
This reverts commit 329aeb5db43f5e69df038fb20d2def77fe6f8595,
and relands commit 61f006ac655431bd44b9e089f74c73bec0c1a48c.
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
Add printf-style alternate form flag to prefix hex number with 0x when
present. This works on both empty numeric expression (e.g. variable
definition from input) and when matching a numeric expression. The
syntax is as follows:
[[#%#<precision specifier><format specifier>, ...]
where <precision specifier> and <format specifier> are optional and ...
can be a variable definition or not with an empty expression or not.
This feature was requested in https://reviews.llvm.org/D81144#2075532
for llvm/test/MC/ELF/gen-dwarf64.s
Reviewed By: jdenny
Differential Revision: https://reviews.llvm.org/D97845
- This patch adds in support for the ordinary HLASM comment syntax asm
statements (Reference - Chapter 7, Comment Statements, Ordinary Comment
Statements)
- In brief, the ordinary comment syntax if used, must begin with the "*"
character
- To achieve this, this patch makes use of the CommentString attribute
provided in the base MCAsmInfo class
- In the SystemZMCAsmInfo class, the CommentString attribute was set to
"*" based on the assembler dialect
- Furthermore, a new attribute RestrictCommentString, is provided to only
treat a string as a comment if it appears at the start of the asm
statement. Example: "jo *-4" is valid in HLASM (jump back 4 bytes from
current point - similar to jo -4 in gnu asm) and we don't want "*-4" to
be treated as a comment.
- RFC for HLASM Parser support implementation: https://lists.llvm.org/pipermail/llvm-dev/2021-January/147686.html
Reviewed By: scott.linder, Kai
Differential Revision: https://reviews.llvm.org/D97703
This patch makes uses of the context bridges introduced in D83299 to make
AAValueConstantRange call site specific.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D83744
Add support to widen select instructions in VPlan native path by using a correct recipe when such instructions are encountered. This is already used by inner loop vectorizer.
Previously select instructions get handled by the wrong recipe and resulted in unreachable instruction errors like this one: https://bugs.llvm.org/show_bug.cgi?id=48139.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D97136
It is good to have a combined `divrem` instruction when the
`div` and `rem` are computed from identical input operands.
Some targets can lower them through a single expansion that
computes both division and remainder. It effectively reduces
the number of instructions than individually expanding them.
Reviewed By: arsenm, paquette
Differential Revision: https://reviews.llvm.org/D96013
now -funique-internal-linkage-name flag is available, and we want to flip
it on by default since it is beneficial to have separate sample profiles
for different internal symbols with the same name. As a preparation, we
want to avoid regression caused by the flip.
When we flip -funique-internal-linkage-name on, the profile is collected
from binary built without -funique-internal-linkage-name so it has no uniq
suffix, but the IR in the optimized build contains the suffix. This kind of
mismatch may introduce transient regression.
To avoid such mismatch, we introduce a NameTable section flag indicating
whether there is any name in the profile containing uniq suffix. Compiler
will decide whether to keep uniq suffix during name canonicalization
depending on the NameTable section flag. The flag is only available for
extbinary format. For other formats, by default compiler will keep uniq
suffix so they will only experience transient regression when
-funique-internal-linkage-name is just flipped.
Another type of regression is caused by places where we miss to call
getCanonicalFnName. Those places are fixed.
Differential Revision: https://reviews.llvm.org/D96932
This test currently fails to compile when using a MinGW toolchain as setenv is not defined. This function is a POSIX function Windows does not implement.
This patch enables the setenv macro used in the unit test for all of Windows, making the test compile and run successfully.
Differential Revision: https://reviews.llvm.org/D98271
The LiveDebugValues and LiveDebugVariables implementations for handling
DBG_VALUE_LIST instructions can be simplified significantly if they do not have
to deal with any duplicated operands, such as a DBG_VALUE_LIST that uses the
same register multiple times in its expression. This patch adds a function,
replaceArg, that can be used to simplify a DIExpression in the case of
duplicated operands.
Differential Revision: https://reviews.llvm.org/D83896
This patch updates the various IR passes to correctly handle dbg.values with a
DIArgList location. This patch does not actually allow DIArgLists to be produced
by salvageDebugInfo, and it does not affect any pass after codegen-prepare.
Other than that, it should cover every IR pass.
Most of the changes simply extend code that operated on a single debug value to
operate on the list of debug values in the style of any_of, all_of, for_each,
etc. Instances of setOperand(0, ...) have been replaced with with
replaceVariableLocationOp, which takes the value that is being replaced as an
additional argument. In places where this value isn't readily available, we have
to track the old value through to the point where it gets replaced.
Differential Revision: https://reviews.llvm.org/D88232
Changes to function calls in LocalTest resulted in comparisons between
unsigned values and signed literals; the latter have been updated to be
unsigned to prevent this warning.
This patch updates DbgVariableIntrinsics to support use of a DIArgList for the
location operand, resulting in a significant change to its interface. This patch
does not update all IR passes to support multiple location operands in a
dbg.value; the only change is to update the DbgVariableIntrinsic interface and
its uses. All code outside of the intrinsic classes assumes that an intrinsic
will always have exactly one location operand; they will still support
DIArgLists, but only if they contain exactly one Value.
Among other changes, the setOperand and setArgOperand functions in
DbgVariableIntrinsic have been made private. This is to prevent code from
setting the operands of these intrinsics directly, which could easily result in
incorrect/invalid operands being set. This does not prevent these functions from
being called on a debug intrinsic at all, as they can still be called on any
CallInst pointer; it is assumed that any code directly setting the operands on a
generic call instruction is doing so safely. The intention for making these
functions private is to prevent DIArgLists from being overwritten by code that's
naively trying to replace one of the Values it points to, and also to fail fast
if a DbgVariableIntrinsic is updated to use a DIArgList without a valid
corresponding DIExpression.
This patch adds a new metadata node, DIArgList, which contains a list of SSA
values. This node is in many ways similar in function to the existing
ValueAsMetadata node, with the difference being that it tracks a list instead of
a single value. Internally, it uses ValueAsMetadata to track the individual
values, but there is also a reasonable amount of DIArgList-specific
value-tracking logic on top of that. Similar to ValueAsMetadata, it is a special
case in parsing and printing due to the fact that it requires a function state
(as it may reference function-local values).
This patch should not result in any immediate functional change; it allows for
DIArgLists to be parsed and printed, but debug variable intrinsics do not yet
recognize them as a valid argument (outside of parsing).
Differential Revision: https://reviews.llvm.org/D88175
This is recommit of 4c8fb7ddd6fa49258e0e9427e7345fb56ba522d4.
MIR in one unit test had mismatched types.
For vectors we consider a bit as known if it is the same for all demanded
vector elements (all elements by default). KnownBits BitWidth for vector
type is size of vector element. Add support for G_BUILD_VECTOR.
This allows combines of urem_pow2_to_mask in pre-legalizer combiner.
Differential Revision: https://reviews.llvm.org/D96122
This reverts commit 7479a2e00bc41f399942e5106fbdf9b4b0c11506.
This commit causes compile errors on clang-x64-windows-msvc, so I'm
reverting the patch for now.
For reference, the error in question is:
```
error C2280: 'llvm::raw_ostream_iterator<char,char>
&llvm::raw_ostream_iterator<char,char>::operator =(const
llvm::raw_ostream_iterator<char,char> &)': attempting to reference a deleted
function
note: compiler has generated 'llvm::raw_ostream_iterator<char,char>::operator ='
here
note: 'llvm::raw_ostream_iterator<char,char>
&llvm::raw_ostream_iterator<char,char>::operator =(const
llvm::raw_ostream_iterator<char,char> &)': function was implicitly deleted
because 'llvm::raw_ostream_iterator<char,char>' has a data member
'llvm::raw_ostream_iterator<char,char>::OutStream' of reference type
```
Adds a class `raw_ostream_iterator` that behaves like
std::ostream_iterator, but can be used with raw_ostream.
This is useful for using raw_ostream with std algorithms.
For example, it can be used to output std containers as follows:
```
std::vector<int> V = { 1, 2, 3 };
std::copy(V.begin(), V.end(), raw_ostream_iterator<int>(outs(), ", "));
// Output: "1, 2, 3, "
```
The API tries to follow std::ostream_iterator as closely as is
practically possible.
Reviewed By: dblaikie, mkitzan
Differential Revision: https://reviews.llvm.org/D78795
:: (store 1 + 4, addrspace 1)
->
:: (store 1 into undef + 4, addrspace 1)
An offset without a base isn't terribly useful but it's convenient to update
the offset without checking the value. For example, when breaking apart
stores into smaller units
Differential Revision: https://reviews.llvm.org/D97812
As stated in the CMake manual, we are supposed to use MODULE rules to generate
plugin libraries:
"MODULE libraries are plugins that are not linked into other targets but may be
loaded dynamically at runtime using dlopen-like functionality"
Besides, LLVM's plugin infrastructure fits with the AIX treatment of .so
shared objects more than it fits with the AIX treatment of .a library archives
(which may contain shared objects).
Differential revision: https://reviews.llvm.org/D96282
Similar to b3a33553aec7, but this shows a TODO and a potential
miscompile is already present.
We are tracking an FP instruction that does *not* have FMF (reassoc)
properties, so calling that "Unsafe" seems opposite of the common
reading.
I also removed one getter method by rolling the null check into
the access. Further simplification may be possible.
The motivation is to clean up the interactions between FMF and
function-level attributes in these classes and their callers.
The new test shows that there is an existing bug somewhere in
the callers. We assumed that the original code was fully 'fast'
and so we produced IR with 'fast' even though it was just 'reassoc'.
For vectors we consider a bit as known if it is the same for all demanded
vector elements (all elements by default). KnownBits BitWidth for vector
type is size of vector element. Add support for G_BUILD_VECTOR.
This allows combines of urem_pow2_to_mask in pre-legalizer combiner.
Differential Revision: https://reviews.llvm.org/D96122
This removes the unit test from a968e7b82eac as it reportedly causes
some link problems. It can be reinstated once the issues are understood
and sorted out.
This adds some simple known bits handling for the three CSINC/NEG/INV
instructions. From the operands known bits we can compute the common
bits of the first operand and incremented/negated/inverted second
operand. The first, especially CSINC ZR, ZR, comes up fair amount in the
tests. The others are more rare so a unit test for them is added.
Differential Revision: https://reviews.llvm.org/D97788
* Introduce the new intrinsic amdgcn_strict_wwm
* Deprecate the old intrinsic amdgcn_wwm
The change is done for consistency as the "strict"
prefix will become an important, distinguishing factor
between amdgcn_wqm and amdgcn_strictwqm in the future.
The "strict" prefix indicates that inactive lanes do not
take part in control flow, specifically an inactive lane
enabled by a strict mode will always be enabled irrespective
of control flow decisions.
The amdgcn_wwm will be removed, but doing so in two steps
gives users time to switch to the new name at their own pace.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96257
This merges more AMDGPU ABI lowering code into the generic call
lowering. Start cleaning up by factoring away more of the pack/unpack
logic into the buildCopy{To|From}Parts functions. These could use more
improvement, and the SelectionDAG versions are significantly more
complex, and we'll eventually have to emulate all of those cases too.
This is mostly NFC, but does result in some minor instruction
reordering. It also removes some of the limitations with mismatched
sizes the old code had. However, similarly to the merge on the input,
this is forcing gfx6/gfx7 to use the gfx8+ ABI (which is what we
actually want, but SelectionDAG is stuck using the weird emergent
ABI).
This also changes the load/store size for stack passed EVTs for
AArch64, which makes it consistent with the DAG behavior.
For the cases of two clobbering loads and one loaded object is fully contained
in the second `BasicAAResult::aliasGEP` returns just `PartialAlias` that
is actually more common case of partial overlap, it doesn't say anything about
actual overlapping sizes.
AA users such as GVN and DSE have no functionality to estimate aliasing of GEPs
with non-constant offsets. The change stores estimated relative offsets so they
can be used further.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93529
