Coverage instrumentation which does not instrument full post-dominators
and full-dominators may skip valid paths, as the reasoning for skipping
blocks may become circular.
This patch fixes that, by only skipping
full post-dominators with multiple predecessors, as such predecessors by
definition can not be full-dominators.
llvm-svn: 303827
Summary:
Frontend generates store instructions after allocas, for example:
```
define i8* @f(i64 %this) "coroutine.presplit"="1" personality i32 0 {
entry:
%this.addr = alloca i64
store i64 %this, i64* %this.addr
..
%hdl = call i8* @llvm.coro.begin(token %id, i8* %alloc)
```
Such instructions may require spilling into coro.frame, but, coro-frame address is only available after coro.begin and thus needs to be moved after coro.begin.
The only instructions that should not be moved are the arguments of coro.begin and all of their operands.
Reviewers: GorNishanov, majnemer
Reviewed By: GorNishanov
Subscribers: llvm-commits, EricWF
Differential Revision: https://reviews.llvm.org/D33527
llvm-svn: 303825
There are some VectorShuffle Nodes in SDAG which can be selected to XXSLDWI
instruction, this patch recognizes them and does the selection to improve the
PPC performance.
llvm-svn: 303822
This change allows llvm-nm to print symbols found in import libraries,
in part by allowing COFFImportFiles to be casted to SymbolicFiles.
Patch by Dave Lee!
llvm-svn: 303821
The swapped operands in the first test is a manifestation of an
inefficiency for vectors that doesn't exist for scalars because
the IRBuilder checks for an all-ones mask for scalars, but not
vectors.
llvm-svn: 303818
Summary: This code was migrated from InstCombine a few years ago. InstCombine had nearby code that would move Constants to the RHS for these, but InstSimplify doesn't have such code on this path.
Reviewers: spatel, majnemer, davide
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33473
llvm-svn: 303774
For non-uniform instructions marked for scalarization, we should update
`VectorTy` when computing instruction costs to reflect the scalar type. In
addition to determining instruction costs, this type is also used to signal
that all instructions in the loop will be scalarized. This currently affects
memory instructions and non-pointer induction variables and their updates. (We
also mark GEPs scalar after vectorization, but their cost is computed together
with memory instructions.) For scalarized induction updates, this patch also
scales the scalar cost by the vectorization factor, corresponding to each
induction step.
llvm-svn: 303763
Use ADDframe pseudo instruction instead.
This will fix machine verifier error, and will help to fix PR32146.
Differential Revision: https://reviews.llvm.org/D33452
llvm-svn: 303758
As noted in https://bugs.llvm.org/show_bug.cgi?id=33138 and
the comments, there are multiple ways to view this. If we
choose not to solve this in InstCombine, these tests will
serve as documentation of that choice.
llvm-svn: 303755
The solution for PR26702 ( https://bugs.llvm.org/show_bug.cgi?id=26702 )
added a canonicalization rule, but the minimal regression tests don't
demonstrate how that rule interacts with other folds.
llvm-svn: 303750
The loop vectorizer usually vectorizes any instruction it can and then
extracts the elements for a scalarized use. On SystemZ, all elements
containing addresses must be extracted into address registers (GRs). Since
this extraction is not free, it is better to have the address in a suitable
register to begin with. By forcing address arithmetic instructions and loads
of addresses to be scalar after vectorization, two benefits result:
* No need to extract the register
* LSR optimizations trigger (LSR isn't handling vector addresses currently)
Benchmarking show improvements on SystemZ with this new behaviour.
Any other target could try this by returning false in the new hook
prefersVectorizedAddressing().
Review: Renato Golin, Elena Demikhovsky, Ulrich Weigand
https://reviews.llvm.org/D32422
llvm-svn: 303744
Summary:
This is a fix for PR32538. MachineCSE first looks at MO.isDead(), but
if it is not marked dead, MachineCSE still wants to do its own check
to see if it is trivially dead. This check for the trivial case
assumed that physical registers cannot be live out of a block.
Patch by Mattias Eriksson.
Reviewers: qcolombet, jbhateja
Reviewed By: qcolombet, jbhateja
Subscribers: jbhateja, llvm-commits
Differential Revision: https://reviews.llvm.org/D33408
llvm-svn: 303731
When folding arguments of AddExpr or MulExpr with recurrences, we rely on the fact that
the loop of our base recurrency is the bottom-lost in terms of domination. This assumption
may be broken by an expression which is treated as invariant, and which depends on a complex
Phi for which SCEVUnknown was created. If such Phi is a loop Phi, and this loop is lower than
the chosen AddRecExpr's loop, it is invalid to fold our expression with the recurrence.
Another reason why it might be invalid to fold SCEVUnknown into Phi start value is that unlike
other SCEVs, SCEVUnknown are sometimes position-bound. For example, here:
for (...) { // loop
phi = {A,+,B}
}
X = load ...
Folding phi + X into {A+X,+,B}<loop> actually makes no sense, because X does not exist and cannot
exist while we are iterating in loop (this memory can be even not allocated and not filled by this moment).
It is only valid to make such folding if X is defined before the loop. In this case the recurrence {A+X,+,B}<loop>
may be existant.
This patch prohibits folding of SCEVUnknown (and those who use them) into the start value of an AddRecExpr,
if this instruction is dominated by the loop. Merging the dominating unknown values is still valid. Some tests that
relied on the fact that some SCEVUnknown should be folded into AddRec's are changed so that they no longer
expect such behavior.
llvm-svn: 303730
I suspect this buildbot has slow-incdec set by default, most likely due to
the default CPU having this set. This feature bit can prevent optsize from
having an effect on this IR.
llvm-svn: 303720
Otherwise we don't revisit an instruction that could be simplified,
and when we verify, we discover there's something that changed, i.e.
what we had wasn't a maximal fixpoint.
Fixes PR32836.
llvm-svn: 303715
Coverage instrumentation has an optimization not to instrument extra
blocks, if the pass is already "accounted for" by a
successor/predecessor basic block.
However (https://github.com/google/sanitizers/issues/783) this
reasoning may become circular, which stops valid paths from having
coverage.
In the worst case this can cause fuzzing to stop working entirely.
This change simplifies logic to something which trivially can not have
such circular reasoning, as losing valid paths does not seem like a
good trade-off for a ~15% decrease in the # of instrumented basic blocks.
llvm-svn: 303698
This fixes 17 of the 41 -verify-machineinstrs test failures identified in PR33045
Differential Revision: https://reviews.llvm.org/D33451
llvm-svn: 303691
Summary:
Promoting Alloca to Vector and Promoting Alloca to LDS are two independent handling of Alloca and should not affect each other.
As a result, we should not give up promoting to vector if there is not enough LDS. This patch factors out the local memory usage
related checking out and replace it after the calling convention checking.
Reviewer:
arsenm
Differential Revision:
http://reviews.llvm.org/D33139
llvm-svn: 303684
Perform DAG combine:
and (srl x, c), mask => shl (bfe x, nb + c, mask >> nb), nb
Where nb is a number of trailing zeroes in mask.
It replaces two instructions with two and BFE is generally a more
expensive one. However this is only done if we are selecting a byte
or word at an aligned boundary which results in a proper SDWA
operand pattern. It is only done if SDWA is supported.
TODO: improve SDWA pass to actually convert this pattern. It is not
done now because we have an immediate in the instruction, which has
be moved into a VGPR.
Differential Revision: https://reviews.llvm.org/D33455
llvm-svn: 303681
Summary:
A temporary workaround for PR32780 - rematerialized instructions accessing the same promoted global through different constant pool entries.
The patch turns off the globals promotion optimization leaving all its code in place, so that it can be easily turned on once PR32780 is fixed.
Since this is a miscompilation issue causing generation of misbehaving code, and the problem is very subtle, the patch might be valuable enough to get into 4.0.1.
Reviewers: efriedma, jmolloy
Reviewed By: efriedma
Subscribers: aemerson, javed.absar, llvm-commits, rengolin, asl, tstellar
Differential Revision: https://reviews.llvm.org/D33446
llvm-svn: 303679
Summary:
It's rare but a small number of patterns use IntInit's at the root of the match.
On X86, one such rule is enabled by the OptForSize predicate and causes the
compiler to use the smaller:
%0 = MOV32r1
instead of the usual:
%0 = MOV32ri 1
This patch adds support for matching IntInit's at the root and uses this as a
test case for the optsize attribute that was implemented in r301750
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32791
llvm-svn: 303678
Also, rename the tests and the file, add comments, and add more tests
because there are no existing tests for some of these folds.
These patterns are particularly important for crippled vector ISAs that
have limited compare predicates (PR33138).
llvm-svn: 303652
shl (or|add x, c2), c1 => or|add (shl x, c1), (c2 << c1)
This allows to fold a constant into an address in some cases as
well as to eliminate second shift if the expression is used as
an address and second shift is a result of a GEP.
Differential Revision: https://reviews.llvm.org/D33432
llvm-svn: 303641
The PowerPC part of processRelocationRef currently assumes that external
symbols can be identified by checking for SymType == SymbolRef::ST_Unknown.
This is actually incorrect in some cases, causing relocation overflows to
be mis-detected. The correct check is to test whether Value.SymbolName
is null.
Includes test case. Note that it is a bit tricky to replicate the exact
condition that triggers the bug in a test case. The one included here
seems to fail reliably (before the fix) across different operating
system versions on Power, but it still makes a few assumptions (called
out in the test case comments).
Also add ppc64le platform name to the supported list in the lit.local.cfg
files for the MCJIT and OrcMCJIT directories, since those tests were
currently not run at all.
Fixes PR32650.
Reviewer: hfinkel
Differential Revision: https://reviews.llvm.org/D33402
llvm-svn: 303637
This patch builds over https://reviews.llvm.org/rL303349 and replaces
the use of the condition only if it is safe to do so.
We should not blindly RAUW the condition if experimental.guard or assume
is a use of that
condition. This is because LVI may have used the guard/assume to
identify the
value of the condition, and RUAWing will fold the guard/assume and uses
before the guards/assumes.
Reviewers: sanjoy, reames, trentxintong, mkazantsev
Reviewed by: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33257
llvm-svn: 303633
Summary:
Added separate pseudo and real instruction for GFX9 SDWA instructions.
Currently supports only in assembler.
Depends D32493
Reviewers: vpykhtin, artem.tamazov
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D33132
llvm-svn: 303620
Summary:
This patch makes instruction fusion more aggressive by
* adding artificial edges between the successors of FirstSU and
SecondSU, similar to BaseMemOpClusterMutation::clusterNeighboringMemOps.
* updating PostGenericScheduler::tryCandidate to keep clusters together,
similar to GenericScheduler::tryCandidate.
This change increases the number of AES instruction pairs generated on
Cortex-A57 and Cortex-A72. This doesn't change code at all in
most benchmarks or general code, but we've seen improvement on kernels
using AESE/AESMC and AESD/AESIMC.
Reviewers: evandro, kristof.beyls, t.p.northover, silviu.baranga, atrick, rengolin, MatzeB
Reviewed By: evandro
Subscribers: aemerson, rengolin, MatzeB, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33230
llvm-svn: 303618
The default behavior of -Rpass-analysis=loop-vectorizer is to report only the
first reason encountered for not vectorizing, if one is found, at which time the
vectorizer aborts its handling of the loop. This patch allows multiple reasons
for not vectorizing to be identified and reported, at the potential expense of
additional compile-time, under allowExtraAnalysis which can currently be turned
on by Clang's -fsave-optimization-record and opt's -pass-remarks-missed.
Removed from LoopVectorizationLegality::canVectorize() the redundant checking
and reporting if we CantComputeNumberOfIterations, as LAI::canAnalyzeLoop() also
does that. This redundancy is caught by a lit test once multiple reasons are
reported.
Patch initially developed by Dror Barak.
Differential Revision: https://reviews.llvm.org/D33396
llvm-svn: 303613
