This introduces a new interface for computeKnownBits that returns the KnownBits object instead of requiring it to be pre-constructed and passed in by reference.
This is a much more convenient interface as it doesn't require the caller to figure out the BitWidth to pre-construct the object. It's so convenient that I believe we can use this interface to remove the special ComputeSignBit flavor of computeKnownBits.
As a step towards that idea, this patch replaces all of the internal usages of ComputeSignBit with this new interface. As you can see from the patch there were a couple places where we called ComputeSignBit which really called computeKnownBits, and then called computeKnownBits again directly. I've reduced those places to only making one call to computeKnownBits. I bet there are probably external users that do it too.
A future patch will update the external users and remove the ComputeSignBit interface. I'll also working on moving more locations to the KnownBits returning interface for computeKnownBits.
Differential Revision: https://reviews.llvm.org/D32848
llvm-svn: 302437
Summary:
Following up on Sanjay's suggetion in D32955, move this functionality
into ShuffleVectornstruction.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32956
llvm-svn: 302420
Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 302416
This patch introduces an LLVM intrinsic and a target opcode for custom event
logging in XRay. Initially, its use case will be to allow users of XRay to log
some type of string ("poor man's printf"). The target opcode compiles to a noop
sled large enough to enable calling through to a runtime-determined relative
function call. At runtime, when X-Ray is enabled, the sled is replaced by
compiler-rt with a trampoline to the logic for creating the custom log entries.
Future patches will implement the compiler-rt parts and clang-side support for
emitting the IR corresponding to this intrinsic.
Reviewers: timshen, dberris
Subscribers: igorb, pelikan, rSerge, timshen, echristo, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D27503
llvm-svn: 302405
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302399
Summary:
This reverts commit 56beec1b1cfc6d263e5eddb7efff06117c0724d2.
Revert "Quick fix to D32609, it seems .o files are not transferred in all cases."
This reverts commit 7652eecd29cfdeeab7f76f687586607a99ff4e36.
Revert "Update llvm-readobj -coff-resources to display tree structure."
This reverts commit 422b62c4d302cfc92401418c2acd165056081ed7.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32958
llvm-svn: 302397
Summary: Continue making updates to llvm-readobj to display resource sections. This is necessary for testing the up and coming cvtres tool.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32609
llvm-svn: 302386
Previously SimplifyCFG used getSetSize which returns an APInt that is 1 bit wider than the ConstantRange's bit width. In the reasonably common case that the ConstantRange is 64-bits wide, this requires returning a 65-bit APInt. APInt's can only store 64-bits without a memory allocation so this is inefficient.
The new method takes the 8 as an input and tells if the range contains more than that many elements without requiring any wider math.
llvm-svn: 302385
Currently llvm-rtdyld in -check mode will map sections to back-to-back 4k
aligned slabs starting at 0x1000. Automatically remapping sections by default is
helpful because it quickly exposes relocation bugs due to use of local addresses
rather than load addresses (these would silently pass if the load address was
not remapped). These mappings can be explicitly overridden on a per-section
basis using llvm-rtdlyd's -map-section option. This patch extends this scheme to
also preserve any mappings made by RuntimeDyld itself. Preserving RuntimeDyld's
automatic mappings allows us to write test cases to verify that these automatic
mappings have been applied.
This will allow the fix in https://reviews.llvm.org/D32899 to be tested with
llvm-rtdyld -check.
llvm-svn: 302372
Summary: This makes setRange take ConstantRange by rvalue reference since most callers were passing an unnamed temporary ConstantRange. We can then move that ConstantRange into the DenseMap caches. For the callers that weren't passing a temporary, I've added std::move to to the local variable being passed.
Reviewers: sanjoy, mzolotukhin, efriedma
Reviewed By: sanjoy
Subscribers: takuto.ikuta, llvm-commits
Differential Revision: https://reviews.llvm.org/D32943
llvm-svn: 302371
Summary:
When writing a loop pass I made a mistake and hit the assertion
"Unreachable block in loop". Later, I hit an assertion when I called
`BasicBlock::eraseFromParent()` incorrectly: "Use still stuck around
after Def is destroyed". This latter assertion, however, printed out
exactly which value is being deleted and what uses remain, which helped
me debug the issue.
To help people debugging their loop passes in the future, print out
exactly which basic block is unreachable in a loop.
Reviewers: sanjoy, hfinkel, mehdi_amini
Reviewed By: mehdi_amini
Subscribers: mzolotukhin
Differential Revision: https://reviews.llvm.org/D32878
llvm-svn: 302354
This is a step toward having statically allocated instruciton mapping.
We are going to tablegen them eventually, so let us reflect that in
the API.
NFC.
llvm-svn: 302316
This exposes a method in MachineFrameInfo that calculates
MaxCallFrameSize and calls it after instruction selection in the ARM
target.
This avoids
ARMBaseRegisterInfo::canRealignStack()/ARMFrameLowering::hasReservedCallFrame()
giving different answers in early/late phases of codegen.
The testcase shows a particular nasty example result of that where we
would fail to properly align an alloca.
Differential Revision: https://reviews.llvm.org/D32622
llvm-svn: 302303
Most of the time we know exactly how many type records we
have in a list, and we want to use the visitor to deserialize
them into actual records in a database. Previously we were
just using push_back() every time without reserving the space
up front in the vector. This is obviously terrible from a
performance standpoint, and it's not uncommon to have PDB
files with half a million type records, where the performance
degredation was quite noticeable.
llvm-svn: 302302
When randomly accessing an element by offset, we weren't passing
the offset through so if you called .offset() it would return a
value of 0.
llvm-svn: 302292
- MIParser: If the successor list is not specified successors will be
added based on basic block operands in the block and possible
fallthrough.
- MIRPrinter: Adds a new `simplify-mir` option, with that option set:
Skip printing of block successor lists in cases where the
parser is guaranteed to reconstruct it. This means we still print the
list if some successor cannot be determined (happens for example for
jump tables), if the successor order changes or branch probabilities
being unequal.
Differential Revision: https://reviews.llvm.org/D31262
llvm-svn: 302289
wcslen is part of the C99 and C++98 standards.
- This introduces the function to TargetLibraryInfo.
- Also set attributes for wcslen in llvm::inferLibFuncAttributes().
Differential Revision: https://reviews.llvm.org/D32837
llvm-svn: 302278
This adds routines for reseting KnownBits to unknown, making the value all zeros or all ones. It also adds methods for querying if the value is zero, all ones or unknown.
Differential Revision: https://reviews.llvm.org/D32637
llvm-svn: 302262
This is similar to my recent fix for VarStreamArrayIterator, but the cause
(and thus the fix) is subtley different. The FixedStreamArrayIterator
iterates over a const Array, so the iterator's value type must be const.
llvm-svn: 302257
This almost completes the matrix of all possible find
functions.
*EXISTING*
----------
find_first
find_first_unset
find_next
find_next_unset
find_last
find_last_unset
*NEW*
----
find_prev
*STILL MISSING*
---------------
find_prev_unset
Differential Revision: https://reviews.llvm.org/D32885
llvm-svn: 302254
llvm-dwarfdump currently prints no message if decompression fails
for some reason. I noticed that during work on one of LLD patches
where LLD produced an broken output. It was a bit confusing to see
no output for section dumped and no any error message at all.
Patch adds error message for such cases.
Differential revision: https://reviews.llvm.org/D32865
llvm-svn: 302221
Verifying the hash values as we are currently doing
results in iterating every type record before the user
even tries to access the first one, and the API user
has no control over, or ability to hook into this
process.
As a result, when the user wants to iterate over types
to print them or index them, this results in a second
iteration over the same list of types. When there's
upwards of 1,000,000 type records, this is obviously
quite undesirable.
This patch raises the verification outside of TpiStream
, and llvm-pdbdump hooks a hash verification visitor
into the normal dumping process. So we still verify
the hash records, but we can do it while not requiring
a second iteration over the type stream.
Differential Revision: https://reviews.llvm.org/D32873
llvm-svn: 302206
I tried to run llvm-pdbdump on a very large (~1.5GB) PDB to
try and identify show-stopping performance problems. This
patch addresses the first such problem.
When loading the DBI stream, before anyone has even tried to
access a single record, we build an in memory map of every
source file for every module. In the particular PDB I was
using, this was over 85 million files. Specifically, the
complexity is O(m*n) where m is the number of modules and
n is the average number of source files (including headers)
per module.
The whole reason for doing this was so that we could have
constant time access to any module and any of its source
file lists. However, we can still get O(1) access to the
source file list for a given module with a simple O(m)
precomputation, and access to the list of modules is
already O(1) anyway.
So this patches reduces the O(m*n) up-front precomputation
to an O(m) one, where n is ~6,500 and n*m is about 85 million
in my pathological test case.
Differential Revision: https://reviews.llvm.org/D32870
llvm-svn: 302205
Summary:
As of this patch, 350 out of 3938 rules are currently imported.
Depends on D32229
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32275
llvm-svn: 302154
Added the integer data processing intrinsics from ACLE v2.1 Chapter 9
but I have missed out the saturation_occurred intrinsics for now. For
the instructions that read and write the GE bits, a chain is included
and the only instruction that reads these flags (sel) is only
selectable via the implemented intrinsic.
Differential Revision: https://reviews.llvm.org/D32281
llvm-svn: 302126
Summary:
This change adds a new section to the xray-instrumented binary that
stores an index into ranges of the instrumentation map, where sleds
associated with the same function can be accessed as an array. At
runtime, we can get access to this index by function ID offset allowing
for selective patching and unpatching by function ID.
Each entry in this new section (xray_fn_idx) will include two pointers
indicating the start and one past the end of the sleds associated with
the same function. These entries will be 16 bytes long on x86 and
aarch64. On arm, we align to 16 bytes anyway so the runtime has to take
that into consideration.
__{start,stop}_xray_fn_idx will be the symbols that the runtime will
look for when we implement the selective patching/unpatching by function
id APIs. Because XRay synthesizes the function id's in a monotonically
increasing manner at runtime now, implementations (and users) can use
this table to look up the sleds associated with a specific function.
This is useful in implementations that want to do things like:
- Implement coverage mode for functions by patching everything
pre-main, then as functions are encountered, the installed handler
can unpatch the function that's been encountered after recording
that it's been called.
- Do "learning mode", so that the implementation can figure out some
statistical information about function calls by function id for a
time being, and then determine which functions are worth
uninstrumenting at runtime.
- Do "selective instrumentation" where an implementation can
specifically instrument only certain function id's at runtime
(either based on some external data, or through some other
heuristics) instead of patching all the instrumented functions at
runtime.
Reviewers: dblaikie, echristo, chandlerc, javed.absar
Subscribers: pelikan, aemerson, kpw, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D32693
llvm-svn: 302109
When profiling a no-op incremental link of Chromium I found that the functions
computeImportForFunction and computeDeadSymbols were consuming roughly 10% of
the profile. The goal of this change is to improve the performance of those
functions by changing the map lookups that they were previously doing into
pointer dereferences.
This is achieved by changing the ValueInfo data structure to be a pointer to
an element of the global value map owned by ModuleSummaryIndex, and changing
reference lists in the GlobalValueSummary to hold ValueInfos instead of GUIDs.
This means that a ValueInfo will take a client directly to the summary list
for a given GUID.
Differential Revision: https://reviews.llvm.org/D32471
llvm-svn: 302108
Summary:
The existing implementation creates a symbolic SCEV expression every
time we analyze a phi node and then has to remove it, when the analysis
is finished. This is very expensive, and in most of the cases it's also
unnecessary. According to the data I collected, ~60-70% of analyzed phi
nodes (measured on SPEC) have the following form:
PN = phi(Start, OP(Self, Constant))
Handling such cases separately significantly speeds this up.
Reviewers: sanjoy, pete
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32663
llvm-svn: 302096
This patch adds isConstant and getConstant for determining if KnownBits represents a constant value and to retrieve the value. Use them to simplify code.
Differential Revision: https://reviews.llvm.org/D32785
llvm-svn: 302091
This patch adds zext, sext, and trunc methods to KnownBits and uses them where possible.
Differential Revision: https://reviews.llvm.org/D32784
llvm-svn: 302088
Otherwise, each CPU has to manually specify the extensions it supports,
even though they have to be a superset of the base arch extensions.
And when there's redundant data there's stale data, so most of the CPUs
lie about the features they support (almost none lists AEK_FP).
Instead, do the saner thing: add the optional extensions on top of the
base extensions provided by the architecture.
The ARM TargetParser has the same behavior.
Differential Revision: https://reviews.llvm.org/D32780
llvm-svn: 302078
That's only a required extension as of v8.1a.
Remove it from the "generic" CPU as well: it should only support the
base ISA (and binutils agrees).
Also unify the MC tests into crc.s and arm64-crc32.s
llvm-svn: 302077
Adrian requested that we break things down to make things clean in the DWARFVerifier. This patch breaks everything down into nice individual functions and cleans up the code quite a bit and prepares us for the next round of verifiers.
Differential Revision: https://reviews.llvm.org/D32812
llvm-svn: 302062
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
llvm-svn: 302060
The raw CodeView format references strings by "offsets", but it's
confusing what table the offset refers to. In the case of line
number information, it's an offset into a buffer of records,
and an indirection is required to get another offset into a
different table to find the final string. And in the case of
checksum information, there is no indirection, and the offset
refers directly to the location of the string in another buffer.
This would be less confusing if we always just referred to the
strings by their value, and have the library be smart enough
to correctly resolve the offsets on its own from the right
location.
This patch makes that possible. When either reading or writing,
all the user deals with are strings, and the library does the
appropriate translations behind the scenes.
llvm-svn: 302053
llvm-readobj hand rolls some CodeView parsing code for string
tables, so this patch updates it to re-use some of the newly
introduced parsing code in LLVMDebugInfoCodeView.
Differential Revision: https://reviews.llvm.org/D32772
llvm-svn: 302052
Adrian requested we create a DWARFVerifier.cpp file to contain all of the DWARF verification stuff. This change simply moves the functionality over into DWARFVerifier.h and DWARFVerifier.cpp, renames the DWARFVerifier methods to start with lower case, and switches DWARFContext.cpp over to using the new functionality.
Differential Revision: https://reviews.llvm.org/D32809
llvm-svn: 302044
This was reverted due to a "missing" file, but in reality
what happened was that I renamed a file, and then due to
a merge conflict both the old file and the new file got
added to the repository. This led to an unused cpp file
being in the repo and not referenced by any CMakeLists.txt
but #including a .h file that wasn't in the repo. In an
even more unfortunate coincidence, CMake didn't report the
unused cpp file because it was in a subdirectory of the
folder with the CMakeLists.txt, and not in the same directory
as any CMakeLists.txt.
The presence of the unused file was then breaking certain
tools that determine file lists by globbing rather than
by what's specified in CMakeLists.txt
In any case, the fix is to just remove the unused file from
the patch set.
llvm-svn: 302042
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
Currently several places assume the VAL member is always at least the same size as pVal. In particular for a memcpy in the move assignment operator. While this is a true assumption, it isn't good practice to assume this.
This patch gives the union a name so we can write the memcpy in terms of the union itself. This also adds a similar memcpy to the move constructor where we previously just copied using VAL directly.
This patch is mostly just a mechanical addition of the U in front of VAL and pVAL everywhere. But several constructors had to be modified since we can't directly initializer a field of named union from the initializer list.
Differential Revision: https://reviews.llvm.org/D30629
llvm-svn: 302040
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
Fixes PR31789 - When loop-vectorize tries to use these intrinsics for a
non-default address space pointer we fail with a "Calling a function with a
bad singature!" assertion. This patch solves this by adding the 'vector of
pointers' argument as an overloaded type which will determine the address
space.
Differential revision: https://reviews.llvm.org/D31490
llvm-svn: 302018
The patch is failing to add StringTableStreamBuilder.h, but that isn't
even discovered because the corresponding StringTableStreamBuilder.cpp
isn't added to any CMakeLists.txt file and thus never built. I think
this patch is just incomplete.
llvm-svn: 302002
This was reported by the ASAN bot, and it turned out to be
a fairly fundamental problem with the design of VarStreamArray
and the way it passes context information to the extractor.
The fix was cumbersome, and I'm not entirely pleased with it,
so I plan to revisit this design in the future when I'm not
pressed to get the bots green again. For now, this fixes
the issue by storing the context information by value instead
of by reference, and introduces some impossibly-confusing
template magic to make things "work".
llvm-svn: 301999
Summary:
This is the corresponding llvm change to D28037 to ensure no performance
regression.
Reviewers: bogner, kbarton, hfinkel, iteratee, echristo
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28329
llvm-svn: 301990
Previously we had knowledge of how to serialize and deserialize
a string table inside of DebugInfo/PDB, but the string table
that it serializes contains a piece that is actually considered
CodeView and can appear outside of a PDB. We already have logic
in llvm-readobj and MCCodeView to read and write this format,
so it doesn't make sense to duplicate the logic in DebugInfoPDB
as well.
This patch makes codeview::StringTable (for writing) and
codeview::StringTableRef (for reading), updates DebugInfoPDB
to use these classes for its own writing, and updates llvm-readobj
to additionally use StringTableRef for reading.
It's a bit more difficult to get MCCodeView to use this for
writing, but it's a logical next step.
llvm-svn: 301986
This patch verifies the .debug_line:
- verify all addresses in a line table sequence have ascending addresses
- verify that all line table file indexes are valid
Unit tests added for both cases.
Differential Revision: https://reviews.llvm.org/D32765
llvm-svn: 301984
Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301980
The directory and file tables now have form-based content descriptors.
Parse these and extract the per-directory/file records based on the
descriptors. For now we support only DW_FORM_string (inline) for the
path names; follow-up work will add support for indirect forms (i.e.,
DW_FORM_strp, strx<N>, and line_strp).
Differential Revision: http://reviews.llvm.org/D32713
llvm-svn: 301978
LTO and other fancy linking previously led to DWARF that contained invalid references. We already validate that CU relative references fall into the CU, and the DW_FORM_ref_addr references fall inside the .debug_info section, but we didn't validate that the references pointed to correct DIE offsets. This new verification will ensure that all references refer to actual DIEs and not an offset in between.
This caught a bug in DWARFUnit::getDIEForOffset() where if you gave it any offset, it would match the DIE that mathes the offset _or_ the next DIE. This has been fixed.
Differential Revision: https://reviews.llvm.org/D32722
llvm-svn: 301971
With the forthcoming codeview::StringTable which a pdb::StringTable
would hold an instance of as one member, this ambiguity becomes
confusing. Rename to PDBStringTable to avoid this.
llvm-svn: 301948
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301939
Previously we wrote line information and file checksum
information, but we did not write information about inlinee
lines and functions. This patch adds support for that.
llvm-svn: 301936
This is motivated by https://reviews.llvm.org/D32488 where I am trying
to add printing of the section type for incompatible sections to LLD
error messages. This patch allows us to use the same code in
llvm-readobj and LLD instead of duplicating the function inside LLD.
Patch by Alexander Richardson!
llvm-svn: 301921
PR31088 demonstrated that we were assuming that only integers require promotion from <1 x iX> types, when in fact float types may require it as well - in this case half floats.
This patch adds support for extension/truncation for both integer and float types.
Differential Revision: https://reviews.llvm.org/D32391
llvm-svn: 301910
r288279 mistakenly added it to all arches, but it's only available
from v8.1 onwards.
The testcase is awkward, because (I suspect) of PR32873.
Spotted by inspection.
llvm-svn: 301890
This tracks whether MaxCallFrameSize is computed yet. Ideally we would
assert and fail when the value is queried before it is computed, however
this fails various targets that need to be fixed first.
Differential Revision: https://reviews.llvm.org/D32570
llvm-svn: 301851
lldb-dwarfdump gets a new "--verify" option that will verify a single file's DWARF debug info and will print out any errors that it finds. It will return an non-zero exit status if verification fails, and a zero exit status if verification succeeds. Adding the --quiet option will suppress any output the STDOUT or STDERR.
The first part of the verify does the following:
- verifies that all CU relative references (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata) have valid CU offsets
- verifies that all DW_FORM_ref_addr references have valid .debug_info offsets
- verifies that all DW_AT_ranges attributes have valid .debug_ranges offsets
- verifies that all DW_AT_stmt_list attributes have valid .debug_line offsets
- verifies that all DW_FORM_strp attributes have valid .debug_str offsets
Unit tests were added for each of the above cases.
Differential Revision: https://reviews.llvm.org/D32707
llvm-svn: 301844
This is to prepare for an upcoming change which uses pointers instead of
GUIDs to represent references.
Differential Revision: https://reviews.llvm.org/D32469
llvm-svn: 301843
We were using operator=(0) which implicitly calls countLeadingZeros but only to compare with 64 to determine if we can compare VAL or pVal[0] to uint64_t. By handling the multiword case with countLeadingZerosSlowCase==BitWidth we can prevent a load of pVal[0] from being inserted inline at each call site. This saves a little bit of code size.
llvm-svn: 301842
This was an omission in r301813. I had made the supporting changes to
make this happen, but I forgot to actually update the PrevPair
declaration.
llvm-svn: 301817
In cases where an instruction (a call site, say) is RAUW'ed with some
other value (this is possible via the `returned` attribute, for
instance), we want the slot in UnknownInsts to point to the original
Instruction we wanted to track, not the value it got replaced by.
Fixes PR32587.
This relands r301426.
llvm-svn: 301814
In preparation for introducing writing capabilities for each of
these classes, I would like to adopt a Foo / FooRef naming
convention, where Foo indicates that the class can manipulate and
serialize Foos, and FooRef indicates that it is an immutable view of
an existing Foo. In other words, Foo is a writer and FooRef is a
reader. This patch names some existing readers to conform to the
FooRef convention, while offering no functional change.
llvm-svn: 301810
Summary:
This frees up one slot in the HandleBaseKind enum, which I will use
later to add a new kind of value handle. The size of the
HandleBaseKind enum is important because we store a HandleBaseKind in
the low two bits of a (in the worst case) 4 byte aligned pointer.
Reviewers: davide, chandlerc
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D32634
llvm-svn: 301809
In this patch, I introduce a new alt macro feature.
This feature adds meaning for the % when using it as a prefix to the calling macro arguments.
In the altmacro mode, the percent sign '%' before an absolute expression convert the expression first to a string.
As described in the https://sourceware.org/binutils/docs-2.27/as/Altmacro.html
"Expression results as strings
You can write `%expr' to evaluate the expression expr and use the result as a string."
expression assumptions:
1. '%' can only evaluate an absolute expression.
2. Altmacro '%' must be the first character of the evaluated expression.
3. If no '%' is located before the expression, a regular module operation is expected.
4. The result of Absolute Expressions can be only integer.
Differential Revision: https://reviews.llvm.org/D32526
llvm-svn: 301797
Summary:
programUndefinedIfPoison makes more sense, given what the function
does; and I'm about to add a function with a name similar to
isKnownNotFullPoison (so do the rename to avoid confusion).
Reviewers: broune, majnemer, bjarke.roune
Reviewed By: broune
Subscribers: mcrosier, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D30444
llvm-svn: 301776
Summary: As per discution on how to get better codegen an large int legalization, it became clear that using a glue for the carry was preventing several desirable optimizations. Passing the carry down as a value allow for more flexibility.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29872
llvm-svn: 301775
This features isn't used anywhere in tree. It's existence seems to be preventing selfhost builds from inlining any of the setBits methods including setLowBits, setHighBits, and setBitsFrom. This is because the code makes the method recursive.
If anyone needs this feature in the future we could consider adding a setBitsWithWrap method. This way only the calls that need it would pay for it.
llvm-svn: 301769
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
Summary: This patch adds isNegative, isNonNegative for querying whether the sign bit is known. It also adds makeNegative and makeNonNegative for controlling the sign bit.
Reviewers: RKSimon, spatel, davide
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32651
llvm-svn: 301747
There is a lot of duplicate code for printing line info between
YAML and the raw output printer. This introduces a base class
that can be shared between the two, and makes some minor
cleanups in the process.
llvm-svn: 301728
This broke the Clang build. (Clang-side patch missing?)
Original commit message:
> [IR] Make add/remove Attributes use AttrBuilder instead of
> AttributeList
>
> This change cleans up call sites and avoids creating temporary
> AttributeList objects.
>
> NFC
llvm-svn: 301712
Fixes the issue highlighted in
http://lists.llvm.org/pipermail/cfe-dev/2014-June/037500.html.
The DW_AT_decl_file and DW_AT_decl_line attributes on namespaces can
prevent LLVM from uniquing types that are in the same namespace. They
also don't carry any meaningful information.
rdar://problem/17484998
Differential Revision: https://reviews.llvm.org/D32648
llvm-svn: 301706
I used Null rather than Zero to match the getNullValue method name.
There are some other places outside APInt where isNullValue would be more readable than isMinValue even though they do the same thing. I'll update those in future patches.
llvm-svn: 301695
Also, add test for data relocations and fix addend to
be signed.
Subscribers: jfb, dschuff
Differential Revision: https://reviews.llvm.org/D32513
llvm-svn: 301690
The IntrNoMem, IntrReadMem, IntrWriteMem, and IntrArgMemOnly intrinsic
properties differ from their corresponding LLVM IR attributes by specifying
that the intrinsic, in addition to its memory properties, has no other side
effects.
The IntrHasSideEffects flag used in combination with one of the memory flags
listed above, makes it possible to define an intrinsic such that its
properties at the CodeGen layer match its properties at the IR layer.
Patch by Tom Stellard
llvm-svn: 301685
The method is called "get *Param* Alignment", and is only used for
return values exactly once, so it should take argument indices, not
attribute indices.
Avoids confusing code like:
IsSwiftError = CS->paramHasAttr(ArgIdx, Attribute::SwiftError);
Alignment = CS->getParamAlignment(ArgIdx + 1);
Add getRetAlignment to handle the one case in Value.cpp that wants the
return value alignment.
This is a potentially breaking change for out-of-tree backends that do
their own call lowering.
llvm-svn: 301682
Adds a new method finalizeLowering to TargetLoweringBase. This is in
preparation for an upcoming commit.
This function is meant for target specific adjustments to
MachineFrameInfo or register reservations.
Move the freezeRegisters() and the hasCopyImplyingStackAdjustment()
handling into the new function to prove the concept. As an added bonus
GlobalISel no longer missed the hasCopyImplyingStackAdjustment()
handling with this.
Differential Revision: https://reviews.llvm.org/D32621
llvm-svn: 301679
This eliminates many extra 'Idx' induction variables in loops over
arguments in CodeGen/ and Target/. It also reduces the number of places
where we assume that ReturnIndex is 0 and that we should add one to
argument numbers to get the corresponding attribute list index.
NFC
llvm-svn: 301666
This became no longer necessary after D19462 landed, and will be incompatible
with an upcoming change to the summary data structures that changes how we
represent references.
llvm-svn: 301660
Summary:
The motivation example is like below which has 13 cases but only 2 distinct targets
```
lor.lhs.false2: ; preds = %if.then
switch i32 %Status, label %if.then27 [
i32 -7012, label %if.end35
i32 -10008, label %if.end35
i32 -10016, label %if.end35
i32 15000, label %if.end35
i32 14013, label %if.end35
i32 10114, label %if.end35
i32 10107, label %if.end35
i32 10105, label %if.end35
i32 10013, label %if.end35
i32 10011, label %if.end35
i32 7008, label %if.end35
i32 7007, label %if.end35
i32 5002, label %if.end35
]
```
which is compiled into a balanced binary tree like this on AArch64 (similar on X86)
```
.LBB853_9: // %lor.lhs.false2
mov w8, #10012
cmp w19, w8
b.gt .LBB853_14
// BB#10: // %lor.lhs.false2
mov w8, #5001
cmp w19, w8
b.gt .LBB853_18
// BB#11: // %lor.lhs.false2
mov w8, #-10016
cmp w19, w8
b.eq .LBB853_23
// BB#12: // %lor.lhs.false2
mov w8, #-10008
cmp w19, w8
b.eq .LBB853_23
// BB#13: // %lor.lhs.false2
mov w8, #-7012
cmp w19, w8
b.eq .LBB853_23
b .LBB853_3
.LBB853_14: // %lor.lhs.false2
mov w8, #14012
cmp w19, w8
b.gt .LBB853_21
// BB#15: // %lor.lhs.false2
mov w8, #-10105
add w8, w19, w8
cmp w8, #9 // =9
b.hi .LBB853_17
// BB#16: // %lor.lhs.false2
orr w9, wzr, #0x1
lsl w8, w9, w8
mov w9, #517
and w8, w8, w9
cbnz w8, .LBB853_23
.LBB853_17: // %lor.lhs.false2
mov w8, #10013
cmp w19, w8
b.eq .LBB853_23
b .LBB853_3
.LBB853_18: // %lor.lhs.false2
mov w8, #-7007
add w8, w19, w8
cmp w8, #2 // =2
b.lo .LBB853_23
// BB#19: // %lor.lhs.false2
mov w8, #5002
cmp w19, w8
b.eq .LBB853_23
// BB#20: // %lor.lhs.false2
mov w8, #10011
cmp w19, w8
b.eq .LBB853_23
b .LBB853_3
.LBB853_21: // %lor.lhs.false2
mov w8, #14013
cmp w19, w8
b.eq .LBB853_23
// BB#22: // %lor.lhs.false2
mov w8, #15000
cmp w19, w8
b.ne .LBB853_3
```
However, the inline cost model estimates the cost to be linear with the number
of distinct targets and the cost of the above switch is just 2 InstrCosts.
The function containing this switch is then inlined about 900 times.
This change use the general way of switch lowering for the inline heuristic. It
etimate the number of case clusters with the suitability check for a jump table
or bit test. Considering the binary search tree built for the clusters, this
change modifies the model to be linear with the size of the balanced binary
tree. The model is off by default for now :
-inline-generic-switch-cost=false
This change was originally proposed by Haicheng in D29870.
Reviewers: hans, bmakam, chandlerc, eraman, haicheng, mcrosier
Reviewed By: hans
Subscribers: joerg, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D31085
llvm-svn: 301649
This is a follow up to the fix in r298360 to improve the handling of debug
values when redundant LEAs are removed. The fix in r298360 effectively
discarded the debug values. This patch now attempts to preserve the debug
values by using the DWARF DW_OP_stack_value operation via prependDIExpr.
Moved functions appendOffset and prependDIExpr from Local.cpp to
DebugInfoMetadata.cpp and made them available as static member functions of
DIExpression.
Differential Revision: https://reviews.llvm.org/D31604
llvm-svn: 301630
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
llvm-svn: 301620
COFF Import libraries which use the obsolete CONSTANT export are
supposed to get two symbols, one with the `_imp_` prefix and one
without. Ensure that we expose both for iteration. This is necessary
to fix the librarian with COFF CONSTANT exports.
llvm-svn: 301614
When dumping raw data from a stream, you might know the offset
of a certain record you're interested in, as well as how long
that record is. Previously, you had to dump the entire stream
and wade through the bytes to find the interesting record.
This patch allows you to specify an offset and length on the
command line, and it will only dump the requested range.
llvm-svn: 301607
Use a combination of !associated, comdat, @llvm.compiler.used and
custom sections to allow dead stripping of globals and their asan
metadata. Sometimes.
Currently this works on LLD, which supports SHF_LINK_ORDER with
sh_link pointing to the associated section.
This also works on BFD, which seems to treat comdats as
all-or-nothing with respect to linker GC. There is a weird quirk
where the "first" global in each link is never GC-ed because of the
section symbols.
At this moment it does not work on Gold (as in the globals are never
stripped).
This is a second re-land of r298158. This time, this feature is
limited to -fdata-sections builds.
llvm-svn: 301587
This patch dumps the raw bytes of the .rsrc sections that
are present in COFF object and executable files. Subsequent
patches will parse this information and dump in a more human
readable format.
Differential Revision: https://reviews.llvm.org/D32463
Patch By: Eric Beckmann
llvm-svn: 301578
Currently, this pass only focuses on *trivial* loop unswitching. At that
reduced problem it remains significantly better than the current loop
unswitch:
- Old pass is worse than cubic complexity. New pass is (I think) linear.
- New pass is much simpler in its design by focusing on full unswitching. (See
below for details on this).
- New pass doesn't carry state for thresholds between pass iterations.
- New pass doesn't carry state for correctness (both miscompile and
infloop) between pass iterations.
- New pass produces substantially better code after unswitching.
- New pass can handle more trivial unswitch cases.
- New pass doesn't recompute the dominator tree for the entire function
and instead incrementally updates it.
I've ported all of the trivial unswitching test cases from the old pass
to the new one to make sure that major functionality isn't lost in the
process. For several of the test cases I've worked to improve the
precision and rigor of the CHECKs, but for many I've just updated them
to handle the new IR produced.
My initial motivation was the fact that the old pass carried state in
very unreliable ways between pass iterations, and these mechansims were
incompatible with the new pass manager. However, I discovered many more
improvements to make along the way.
This pass makes two very significant assumptions that enable most of these
improvements:
1) Focus on *full* unswitching -- that is, completely removing whatever
control flow construct is being unswitched from the loop. In the case
of trivial unswitching, this means removing the trivial (exiting)
edge. In non-trivial unswitching, this means removing the branch or
switch itself. This is in opposition to *partial* unswitching where
some part of the unswitched control flow remains in the loop. Partial
unswitching only really applies to switches and to folded branches.
These are very similar to full unrolling and partial unrolling. The
full form is an effective canonicalization, the partial form needs
a complex cost model, cannot be iterated, isn't canonicalizing, and
should be a separate pass that runs very late (much like unrolling).
2) Leverage LLVM's Loop machinery to the fullest. The original unswitch
dates from a time when a great deal of LLVM's loop infrastructure was
missing, ineffective, and/or unreliable. As a consequence, a lot of
complexity was added which we no longer need.
With these two overarching principles, I think we can build a fast and
effective unswitcher that fits in well in the new PM and in the
canonicalization pipeline. Some of the remaining functionality around
partial unswitching may not be relevant today (not many test cases or
benchmarks I can find) but if they are I'd like to add support for them
as a separate layer that runs very late in the pipeline.
Purely to make reviewing and introducing this code more manageable, I've
split this into first a trivial-unswitch-only pass and in the next patch
I'll add support for full non-trivial unswitching against a *fixed*
threshold, exactly like full unrolling. I even plan to re-use the
unrolling thresholds, as these are incredibly similar cost tradeoffs:
we're cloning a loop body in order to end up with simplified control
flow. We should only do that when the total growth is reasonably small.
One of the biggest changes with this pass compared to the previous one
is that previously, each individual trivial exiting edge from a switch
was unswitched separately as a branch. Now, we unswitch the entire
switch at once, with cases going to the various destinations. This lets
us unswitch multiple exiting edges in a single operation and also avoids
numerous extremely bad behaviors, where we would introduce 1000s of
branches to test for thousands of possible values, all of which would
take the exact same exit path bypassing the loop. Now we will use
a switch with 1000s of cases that can be efficiently lowered into
a jumptable. This avoids relying on somehow forming a switch out of the
branches or getting horrible code if that fails for any reason.
Another significant change is that this pass actively updates the CFG
based on unswitching. For trivial unswitching, this is actually very
easy because of the definition of loop simplified form. Doing this makes
the code coming out of loop unswitch dramatically more friendly. We
still should run loop-simplifycfg (at the least) after this to clean up,
but it will have to do a lot less work.
Finally, this pass makes much fewer attempts to simplify instructions
based on the unswitch. Something like loop-instsimplify, instcombine, or
GVN can be used to do increasingly powerful simplifications based on the
now dominating predicate. The old simplifications are things that
something like loop-instsimplify should get today or a very, very basic
loop-instcombine could get. Keeping that logic separate is a big
simplifying technique.
Most of the code in this pass that isn't in the old one has to do with
achieving specific goals:
- Updating the dominator tree as we go
- Unswitching all cases in a switch in a single step.
I think it is still shorter than just the trivial unswitching code in
the old pass despite having this functionality.
Differential Revision: https://reviews.llvm.org/D32409
llvm-svn: 301576
libraries are properly unloaded when llvm_shutdown is called.
Summary:
This was mostly affecting usage of the JIT, where storing the library handles in
a set made iteration unordered/undefined. This lead to disagreement between the
JIT and native code as to what the address and implementation of particularly on
Windows with stdlib functions:
JIT: putenv_s("TEST", "VALUE") // called msvcrt.dll, putenv_s
JIT: getenv("TEST") -> "VALUE" // called msvcrt.dll, getenv
Native: getenv("TEST") -> NULL // called ucrt.dll, getenv
Also fixed is the issue of DynamicLibrary::getPermanentLibrary(0,0) on Windows
not giving priority to the process' symbols as it did on Unix.
Reviewers: chapuni, v.g.vassilev, lhames
Reviewed By: lhames
Subscribers: danalbert, srhines, mgorny, vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D30107
llvm-svn: 301562
Previously parsing of these were all grouped together into a
single master class that could parse any type of debug info
fragment.
With writing forthcoming, the complexity of each individual
fragment is enough to warrant them having their own classes so
that reading and writing of each fragment type can be grouped
together, but isolated from the code for reading and writing
other fragment types.
In doing so, I found a place where parsing code was duplicated
for the FileChecksums fragment, across llvm-readobj and the
CodeView library, and one of the implementations had a bug.
Now that the codepaths are merged, the bug is resolved.
Differential Revision: https://reviews.llvm.org/D32547
llvm-svn: 301557
We have a lot of very similarly named classes related to
dealing with module debug info. This patch has NFC, it just
renames some classes to be more descriptive (albeit slightly
more to type). The mapping from old to new class names is as
follows:
Old | New
ModInfo | DbiModuleDescriptor
ModuleSubstream | ModuleDebugFragment
ModStream | ModuleDebugStream
With the corresponding Builder classes renamed accordingly.
Differential Revision: https://reviews.llvm.org/D32506
llvm-svn: 301555
This changes code that touches ValueHandleBase::V to go through
getValPtr and (newly added) setValPtr. This functionality will be
used later, but also seemed like a generally good cleanup.
I also renamed the field to Val, but that's just to make it obvious
that I fixed all the uses.
llvm-svn: 301518
Previously, an expression such as Saver.save(std::string("foo") + "bar")
didn't compile because there is an ambiguity as to whether the argument
is of const Twine& or StringRef.
llvm-svn: 301512
DISubprogram currently has 10 pointer operands, several of which are
often nullptr. This patch reduces the amount of memory allocated by
DISubprogram by rearranging the operands such that containing type,
template params, and thrown types come last, and are only allocated
when they are non-null (or followed by non-null operands).
This patch also eliminates the entirely unused DisplayName operand.
This saves up to 4 pointer operands per DISubprogram. (I tried
measuring the effect on peak memory usage on an LTO link of an X86
llc, but the results were very noisy).
This reapplies r301498 with an attempted workaround for g++.
Differential Revision: https://reviews.llvm.org/D32560
llvm-svn: 301501
DISubprogram currently has 10 pointer operands, several of which are
often nullptr. This patch reduces the amount of memory allocated by
DISubprogram by rearranging the operands such that containing type,
template params, and thrown types come last, and are only allocated
when they are non-null (or followed by non-null operands).
This patch also eliminates the entirely unused DisplayName operand.
This saves up to 4 pointer operands per DISubprogram. (I tried
measuring the effect on peak memory usage on an LTO link of an X86
llc, but the results were very noisy).
llvm-svn: 301498
For Swift we would like to be able to encode the error types that a
function may throw, so the debugger can display them alongside the
function's return value when finish-ing a function.
DWARF defines DW_TAG_thrown_type (intended to be used for C++ throw()
declarations) that is a perfect fit for this purpose. This patch wires
up support for DW_TAG_thrown_type in LLVM by adding a list of thrown
types to DISubprogram.
To offset the cost of the extra pointer, there is a follow-up patch
that turns DISubprogram into a variable-length node.
rdar://problem/29481673
Differential Revision: https://reviews.llvm.org/D32559
llvm-svn: 301489
The previous algorithm processed one character at a time, which is very
painful on a modern CPU. Replace it with xxHash64, which both already
exists in the codebase and is fairly fast.
Patch from Scott Smith!
Differential Revision: https://reviews.llvm.org/D32509
llvm-svn: 301487
This patch introduces a new KnownBits struct that wraps the two APInt used by computeKnownBits. This allows us to treat them as more of a unit.
Initially I've just altered the signatures of computeKnownBits and InstCombine's simplifyDemandedBits to pass a KnownBits reference instead of two separate APInt references. I'll do similar to the SelectionDAG version of computeKnownBits/simplifyDemandedBits as a separate patch.
I've added a constructor that allows initializing both APInts to the same bit width with a starting value of 0. This reduces the repeated pattern of initializing both APInts. Once place default constructed the APInts so I added a default constructor for those cases.
Going forward I would like to add more methods that will work on the pairs. For example trunc, zext, and sext occur on both APInts together in several places. We should probably add a clear method that can be used to clear both pieces. Maybe a method to check for conflicting information. A method to return (Zero|One) so we don't write it out everywhere. Maybe a method for (Zero|One).isAllOnesValue() to determine if all bits are known. I'm sure there are many other methods we can come up with.
Differential Revision: https://reviews.llvm.org/D32376
llvm-svn: 301432
Commits were:
"Use WeakVH instead of WeakTrackingVH in AliasSetTracker's UnkownInsts"
"Add a new WeakVH value handle; NFC"
"Rename WeakVH to WeakTrackingVH; NFC"
The changes assumed pointers are 8 byte aligned on all architectures.
llvm-svn: 301429
Summary:
In cases where an instruction (a call site, say) is RAUW'ed with some
other value (this is possible via the `returned` attribute, amongst
other things), we want the slot in UnknownInsts to point to the
original Instruction we wanted to track, not the value it got replaced
by.
Fixes PR32587.
Reviewers: davide
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D32268
llvm-svn: 301426
Summary:
WeakVH nulls itself out if the value it was tracking gets deleted, but
it does not track RAUW.
Reviewers: dblaikie, davide
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D32267
llvm-svn: 301425
Summary:
I plan to use WeakVH to mean "nulls itself out on deletion, but does
not track RAUW" in a subsequent commit.
Reviewers: dblaikie, davide
Reviewed By: davide
Subscribers: arsenm, mehdi_amini, mcrosier, mzolotukhin, jfb, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D32266
llvm-svn: 301424
Summary:
Expose the internal query structure, start using it.
Note: This is the most minimal change possible i could create. I have
trivial followups, like fixing the one use of const FastMathFlags &,
the renaming of CtxI to be consistent, etc.
This should be NFC.
Reviewers: majnemer, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32448
llvm-svn: 301379
Summary:
Addends are used as offsets to addresses of globals
and can be both positive and negative. This change
prints libObject in line with the spec and the MC
layer.
Subscribers: jfb, dschuff
Differential Revision: https://reviews.llvm.org/D32507
llvm-svn: 301369
We were already parsing and dumping this to the human readable
format, but not to the YAML format. This does so, in preparation
for reading it in and reconstructing the line information from
YAML.
llvm-svn: 301357
We already have a function toHex that will convert a string like
"\xFF\xFF" to the string "FFFF", but we do not have one that goes
the other way - i.e. to convert a textual string representing a
sequence of hexadecimal characters into the corresponding actual
bytes. This patch adds such a function.
llvm-svn: 301356
Remove the temporary, poorly named getSlotSet method which did the same
thing. Also remove getSlotNode, which is a hold-over from when we were
dealing with AttributeSetNode* instead of AttributeSet.
llvm-svn: 301267
Summary:
That API creates a temporary AttributeList to carry an index and a
single AttributeSet. We need to carry the index in addition to the set,
because that is how attribute groups are currently encoded.
NFC
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32262
llvm-svn: 301245
Use constant references rather than `const auto` which will cause the
copy constructor. These particular cases cause issues for the swift
compiler.
llvm-svn: 301237
libraries are properly unloaded when llvm_shutdown is called.
Summary:
This was mostly affecting usage of the JIT, where storing the library handles in
a set made iteration unordered/undefined. This lead to disagreement between the
JIT and native code as to what the address and implementation of particularly on
Windows with stdlib functions:
JIT: putenv_s("TEST", "VALUE") // called msvcrt.dll, putenv_s
JIT: getenv("TEST") -> "VALUE" // called msvcrt.dll, getenv
Native: getenv("TEST") -> NULL // called ucrt.dll, getenv
Also fixed is the issue of DynamicLibrary::getPermanentLibrary(0,0) on Windows
not giving priority to the process' symbols as it did on Unix.
Reviewers: chapuni, v.g.vassilev, lhames
Reviewed By: lhames
Subscribers: danalbert, srhines, mgorny, vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D30107
llvm-svn: 301236
Summary:
llvm.invariant.group.barrier returns pointer that mustalias
pointer it takes. It can't be marked with `returned` attribute,
because it would be remove easily. The other reason is that
only Alias Analysis can know about this, because if any other
pass would know it, then the result would be replaced with it's
argument, which would be invalid.
We can think about returned pointer as something that mustalias, but
it doesn't have to be bitwise the same as the argument.
Reviewers: dberlin, chandlerc, hfinkel, sanjoy
Subscribers: reames, nlewycky, rsmith, anna, amharc
Differential Revision: https://reviews.llvm.org/D31585
llvm-svn: 301227
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
Currently the operand type for ATOMIC_FENCE assumes value type of a pointer in address space 0.
This is fine for most targets. However for amdgcn target, the size of pointer in address space 0
depends on triple environment. For amdgiz environment, it is 64 bit but for other environment it is
32 bit. On the other hand, amdgcn target expects 32 bit fence operands independent of the target
triple environment. Therefore a hook is need in target lowering for getting the fence operand type.
This patch has no effect on targets other than amdgcn.
Differential Revision: https://reviews.llvm.org/D32186
llvm-svn: 301215
