registers if used by a bitconvert or using a bitconvert. This allows us to
avoid constant pool loads and use cheaper integer instructions when the
values come from or end up in integer regs anyway. For example, we now
compile CodeGen/X86/fp-in-intregs.ll to:
_test1:
movl $2147483648, %eax
xorl 4(%esp), %eax
ret
_test2:
movl $1065353216, %eax
orl 4(%esp), %eax
andl $3212836864, %eax
ret
Instead of:
_test1:
movss 4(%esp), %xmm0
xorps LCPI2_0, %xmm0
movd %xmm0, %eax
ret
_test2:
movss 4(%esp), %xmm0
andps LCPI3_0, %xmm0
movss LCPI3_1, %xmm1
andps LCPI3_2, %xmm1
orps %xmm0, %xmm1
movd %xmm1, %eax
ret
bitconverts can happen due to various calling conventions that require
fp values to passed in integer regs in some cases, e.g. when returning
a complex.
llvm-svn: 46414
delete a node even if it was not dead in some cases. Instead, just add it to
the worklist. Also, make sure to use the CombineTo methods, as it was doing
things that were unsafe: the top level combine loop could touch dangling memory.
This fixes CodeGen/Generic/2008-01-25-dag-combine-mul.ll
llvm-svn: 46384
This case returns the value in ST(0) and then has to convert it to an SSE
register. This causes significant codegen ugliness in some cases. For
example in the trivial fp-stack-direct-ret.ll testcase we used to generate:
_bar:
subl $28, %esp
call L_foo$stub
fstpl 16(%esp)
movsd 16(%esp), %xmm0
movsd %xmm0, 8(%esp)
fldl 8(%esp)
addl $28, %esp
ret
because we move the result of foo() into an XMM register, then have to
move it back for the return of bar.
Instead of hacking ever-more special cases into the call result lowering code
we take a much simpler approach: on x86-32, fp return is modeled as always
returning into an f80 register which is then truncated to f32 or f64 as needed.
Similarly for a result, we model it as an extension to f80 + return.
This exposes the truncate and extensions to the dag combiner, allowing target
independent code to hack on them, eliminating them in this case. This gives
us this code for the example above:
_bar:
subl $12, %esp
call L_foo$stub
addl $12, %esp
ret
The nasty aspect of this is that these conversions are not legal, but we want
the second pass of dag combiner (post-legalize) to be able to hack on them.
To handle this, we lie to legalize and say they are legal, then custom expand
them on entry to the isel pass (PreprocessForFPConvert). This is gross, but
less gross than the code it is replacing :)
This also allows us to generate better code in several other cases. For
example on fp-stack-ret-conv.ll, we now generate:
_test:
subl $12, %esp
call L_foo$stub
fstps 8(%esp)
movl 16(%esp), %eax
cvtss2sd 8(%esp), %xmm0
movsd %xmm0, (%eax)
addl $12, %esp
ret
where before we produced (incidentally, the old bad code is identical to what
gcc produces):
_test:
subl $12, %esp
call L_foo$stub
fstpl (%esp)
cvtsd2ss (%esp), %xmm0
cvtss2sd %xmm0, %xmm0
movl 16(%esp), %eax
movsd %xmm0, (%eax)
addl $12, %esp
ret
Note that we generate slightly worse code on pr1505b.ll due to a scheduling
deficiency that is unrelated to this patch.
llvm-svn: 46307
Fixed CellSPU's A-form (local store) address mode, so that all globals,
externals, constant pool and jump table symbols are now wrapped within
a SPUISD::AFormAddr pseudo-instruction. This now identifies all local
store memory addresses, although it requires a bit of legerdemain during
instruction selection to properly select loads to and stores from local
store, properly generating "LQA" instructions.
Also added mul_ops.ll test harness for exercising integer multiplication.
llvm-svn: 46142
1. Legalize now always promotes truncstore of i1 to i8.
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
safe.
The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:
_foo:
fldt 20(%esp)
fldt 4(%esp)
faddp %st(1)
movl 36(%esp), %eax
fstps (%eax)
ret
instead of:
_foo:
subl $4, %esp
fldt 24(%esp)
fldt 8(%esp)
faddp %st(1)
fstps (%esp)
movl 40(%esp), %eax
movss (%esp), %xmm0
movss %xmm0, (%eax)
addl $4, %esp
ret
llvm-svn: 46140
and the spill is its kill. However, if the local allocator has determined the
register has not been modified (possible when its value was reloaded), it would
not issue a restore. In that case, mark the last use of the virtual register as
kill.
llvm-svn: 46111
It's not safe to use the two value CombineTo variant to combine away a dead load.
e.g.
v1, chain2 = load chain1, loc
v2, chain3 = load chain2, loc
v3 = add v2, c
Now we replace use of v1 with undef, use of chain2 with chain1.
ReplaceAllUsesWith() will iterate through uses of the first load and update operands:
v1, chain2 = load chain1, loc
v2, chain3 = load chain1, loc
v3 = add v2, c
Now the second load is the same as the first load, SelectionDAG cse will ensure
the use of second load is replaced with the first load.
v1, chain2 = load chain1, loc
v3 = add v1, c
Then v1 is replaced with undef and bad things happen.
llvm-svn: 46099
it should work, but I have no machine to test
it on. Committed because it will at least
cause no harm, and maybe someone can test it
for me!
llvm-svn: 46098
make the 'fp return in ST(0)' optimization smart enough to
look through token factor nodes. THis allows us to compile
testcases like CodeGen/X86/fp-stack-retcopy.ll into:
_carg:
subl $12, %esp
call L_foo$stub
fstpl (%esp)
fldl (%esp)
addl $12, %esp
ret
instead of:
_carg:
subl $28, %esp
call L_foo$stub
fstpl 16(%esp)
movsd 16(%esp), %xmm0
movsd %xmm0, 8(%esp)
fldl 8(%esp)
addl $28, %esp
ret
Still not optimal, but much better and this is a trivial patch. Fixing
the rest requires invasive surgery that is is not llvm 2.2 material.
llvm-svn: 46054
- struct_2.ll: Completely unaligned load/store testing
- call_indirect.ll, struct_1.ll: Add test lines to exercise
X-form [$reg($reg)] addressing
At this point, loads and stores should be under control (he says
in an optimistic tone of voice.)
llvm-svn: 45882
- Cleaned up custom load/store logic, common code is now shared [see note
below], cleaned up address modes
- More test cases: various intrinsics, structure element access (load/store
test), updated target data strings, indirect function calls.
Note: This patch contains a refactoring of the LoadSDNode and StoreSDNode
structures: they now share a common base class, LSBaseSDNode, that
provides an interface to their common functionality. There is some hackery
to access the proper operand depending on the derived class; otherwise,
to do a proper job would require finding and rearranging the SDOperands
sent to StoreSDNode's constructor. The current refactor errs on the
side of being conservatively and backwardly compatible while providing
functionality that reduces redundant code for targets where loads and
stores are custom-lowered.
llvm-svn: 45851
Likewise fix up a bunch of other libcalls. While
there I remove NEG_F32 and NEG_F64 since they are
not used anywhere. This fixes 9 Ada ACATS failures.
llvm-svn: 45833
the code generated is not wonderful. This turns a miscompilation into
a code quality bug (noted in the ppc readme). This fixes PR642, which
is over 2 years old (!). Nate, please review this.
llvm-svn: 45742
values, which means doing extra legalization work.
It would be easier to get this kind of thing right if
there was some documentation...
llvm-svn: 45472
eliminating the llvm.x86.sse2.loadl.pd intrinsic?), one shuffle optzn
may be done (if shufps is better than pinsw, Evan, please review), and
we already know about LICM of simple instructions.
llvm-svn: 45407
