There may be other use operands that also need their kill flags cleared.
This happens in a few tests when SIFoldOperands is moved after
PeepholeOptimizer.
PeepholeOptimizer rewrites cases that look like:
%vreg0 = ...
%vreg1 = COPY %vreg0
use %vreg1<kill>
%vreg2 = COPY %vreg0
use %vreg2<kill>
to use the earlier source to
%vreg0 = ...
use %vreg0
use %vreg0
Currently SIFoldOperands sees the copied registers, so there is
only one use. So far I haven't managed to come up with a test
that currently has multiple uses of a foldable VGPR -> VGPR copy.
llvm-svn: 250960
This wasn't doing anything useful. They weren't explicitly used
anywhere, and the RegScavenger ignores reserved registers.
This for some reason caused a random scheduling change in the test.
Getting the check lines to pass is too frustrating, and there's probably
not too much value in checking the vector case's operands N times.
llvm-svn: 250794
The comment says this was stopped because it was unlikely to be
profitable. This is not true if you want to combine vector loads
with multiple components.
For a simple case that looks like
t0 = load t0 ...
t1 = load t0 ...
t2 = load t0 ...
t3 = load t0 ...
t4 = store t0:1, t0:1
t5 = store t4, t1:0
t6 = store t5, t2:0
t7 = store t6, t3:0
We want to get all of these stores onto a chain
that is a TokenFactor of these N loads. This mostly
solves the AMDGPU merge-stores.ll regressions
with -combiner-alias-analysis for merging vector
stores of vector loads.
llvm-svn: 250138
This basic combine was surprisingly missing.
AMDGPU legalizes many operations in terms of 32-bit vector components,
so not doing this results in many extra copies and subregister extracts
that need to be cleaned up later.
InstCombine already does this for the hasOneUse case. The target hook
is to fix a handful of tests which break (e.g. ARM/vmov.ll) which turn
from a vector materialize repeated immediate instruction to a constant
vector load with more scalar copies from it.
llvm-svn: 250129
This stops using an unknown reg class operand.
Currently build_vector selection has a broken looking check
where it tries to use a VGPR reg class and an SGPR one if it
sees an SGPR use.
With the source operand has an explicit VGPR class,
illegal copies will be inserted that SIFixSGPRCopies will take care
of normally later, which will allow removing the weird check
of build_vector users. Without this, when removed v_movrels_b32 would
still be emitted even though all of the values were only stored in
SGPRs.
llvm-svn: 249494
Summary:
We currently ignore the calling convention, so there is no real reason to
assert on the calling convention of functions.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13367
llvm-svn: 249468
Summary:
Instead of asserting when the kernel metadata is different than we expect,
we should just skip lowering that function. This fixes assertion
failures with OpenCL argument metadata from older LLVM releases.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13356
llvm-svn: 249073
v2: Add test (Matt).
Fix capitalization of isEOP (Matt).
Move pattern to class parameter (Matt).
Make the instruction available to Cayman (Matt).
Change name from MEM_RAT WRITE_TYPED to MEM_RAT STORE_TYPED.
Patch by: Zoltan Gilian
llvm-svn: 249042
Trying to use the version with the explicit output operand
would complain because of the missing WriteSALU. I'm not sure
why it doesn't complain about this with the implicit VCC def.
llvm-svn: 248646
If a virtual register is copied and another copy was already
seen, replace with the previous copy. This only handles the
simplest cases for now.
This pattern shows up from various operand restrictions
AMDGPU has which require inserting copies depending
on the register class of the operands.
llvm-svn: 248611
This fixes a select error when the i64 source was also
bitcasted to v2i32 in the original source.
Instead of awkwardly trying to select the modified source value and
the store, replace before isel begins.
Uses a worklist to avoid possible problems from mutating the DAG,
although it seems to work OK without it.
llvm-svn: 248589
These were all using the default 32-bit VALU write class,
but the i64/f64 compares are half rate.
I'm not sure this is really correct, because they are still using
the write to VALU write class, even though they really write
to the SALU.
llvm-svn: 248582
These are necessary for implementing mem_fence for
OpenCL 2.0.
The VI assembler tests are disabled since it seems to be
using the wrong encoding or opcode.
llvm-svn: 248532
Allow a target to do something other than search for copies
that will avoid cross register bank copies.
Implement for SI by only rewriting the most basic copies,
so it should look through anything like a subregister extract.
I'm not entirely satisified with this because it seems like
eliminating a reg_sequence that isn't fully used should work
generically for all targets without them having to override
something. However, it seems to be tricky to have a simple
implementation of this without rewriting to invalid kinds
of subregister copies on some targets.
I'm not sure if there is currently a generic way to easily check
if a subregister index would be valid for the current use.
The current set of TargetRegisterInfo::get*Class functions don't
quite behave like I would expect (e.g. getSubClassWithSubReg
returns the maximal register class rather than the minimal), so
I'm not sure how to make the generic test keep searching if
SrcRC:SrcSubReg is a valid replacement for DefRC:DefSubReg. Making
the default implementation to check for simple copies breaks
a variety of ARM and x86 tests by producing illegal subregister uses.
The ARM tests are not actually changed since it should still be using
the same sharesSameRegisterFile implementation, this just relaxes
them to not check for specific registers.
llvm-svn: 248478
Instead of always inserting a copy in case
the super register is itself a subregister,
only extract to the super reg class if this is
actually the case.
This shouldn't really change codegen, but
makes looking at the output of SIFixSGPRCopies
easier to read.
llvm-svn: 248467
We may have subregister defs which are unused but not discovered and
cleaned up prior to liveness analysis. This creates multiple connected
components in the resulting live range which are forbidden in the
MachineVerifier because they would unnecesarily constrain the register
allocator. Rewrite those dead definitions to define a newly created
virtual register.
Differential Revision: http://reviews.llvm.org/D13035
llvm-svn: 248335
This patch adds support for combining patterns such as (FMUL(FADD(1.0, x), y)) and (FMUL(FSUB(x, 1.0), y)) to their FMA equivalents.
This is useful in particular for linear interpolation cases such as (FADD(FMUL(x, t), FMUL(y, FSUB(1.0, t))))
Differential Revision: http://reviews.llvm.org/D13003
llvm-svn: 248210
If storing multiple FP constants, some subset of the stores
would be replaced with integers due to visit order, so
MergeConsecutiveStores would only partially merge
these.
llvm-svn: 248169
Summary:
This helps mostly when we use add instructions for address calculations
that contain immediates.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12256
llvm-svn: 247157
Currently this hits an assert that extload should
always be supported, which assumes integer extloads.
This moves a hack out of SI's argument lowering and
is covered by existing tests.
llvm-svn: 247113
sub C, x - > add (sub 0, x), C for DS offsets.
This is mostly to fix regressions that show up when
SeparateConstOffsetFromGEP is enabled.
llvm-svn: 247054
The VOP3 encoding of these allows any SGPR pair for the i1
output, but this was forced before to always use vcc.
This doesn't yet try to use this, but does add the operand
to the definitions so the main change is adding vcc to the
output of the VOP2 encoding.
llvm-svn: 246358
Without a memory operand, mayLoad or mayStore instructions
are treated as hasUnorderedMemRef, which results in much worse
scheduling.
We really should have a verifier check that any
non-side effecting mayLoad or mayStore has a memory operand.
There are a few instructions (interp and images) which I'm
not sure what / where to add these.
llvm-svn: 246356
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
llvm-svn: 246327
We can wait on either VM, EXP or LGKM.
The waits are independent.
Without this patch, a wait inserted because of one of them
would also wait for all the previous others.
This patch makes s_wait only wait for the ones we need for the next
instruction.
Here's an example of subtle perf reduction this patch solves:
This is without the patch:
buffer_load_format_xyzw v[8:11], v0, s[44:47], 0 idxen
buffer_load_format_xyzw v[12:15], v0, s[48:51], 0 idxen
s_load_dwordx4 s[44:47], s[8:9], 0xc
s_waitcnt lgkmcnt(0)
buffer_load_format_xyzw v[16:19], v0, s[52:55], 0 idxen
s_load_dwordx4 s[48:51], s[8:9], 0x10
s_waitcnt vmcnt(1)
buffer_load_format_xyzw v[20:23], v0, s[44:47], 0 idxen
The s_waitcnt vmcnt(1) is useless.
The reason it is added is because the last
buffer_load_format_xyzw needs s[44:47], which was issued
by the first s_load_dwordx4. It waits for all VM
before that call to have finished.
Internally after every instruction, 3 counters (for VM, EXP and LGTM)
are updated after every instruction. For example buffer_load_format_xyzw
will
increase the VM counter, and s_load_dwordx4 the LGKM one.
Without the patch, for every defined register,
the current 3 counters are stored, and are used to know
how long to wait when an instruction needs the register.
Because of that, the s[44:47] counter includes that to use the register
you need to wait for the previous buffer_load_format_xyzw.
Instead this patch stores only the counters that matter for the
register,
and puts zero for the other ones, since we don't need any wait for them.
Patch by: Axel Davy
Differential Revision: http://reviews.llvm.org/D11883
llvm-svn: 245755
The pass adds new kernel arguments for image attributes, and
resolves calls to dummy attribute and resource id getter functions.
Patch by: Zoltan Gilian
llvm-svn: 244372
Summary: This allows us to consolidate several of the TableGen patterns.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11602
llvm-svn: 244253
This commit fixes a bug in the class 'SIInstrInfo' where the implicit register
machine operands were added to a machine instruction in an incorrect order -
the implicit uses were added before the implicit defs.
I found this bug while working on moving the implicit register operand
verification code from the MIR parser to the machine verifier.
This commit also makes the method 'addImplicitDefUseOperands' in the machine
instruction class public so that it can be reused in the 'SIInstrInfo' class.
Reviewers: Matt Arsenault
Differential Revision: http://reviews.llvm.org/D11689
llvm-svn: 243799
If the pointer is the store's value operand, this would produce
a broken module. Make sure the use is actually for the pointer operand.
llvm-svn: 243462
Author: Dave Airlie <airlied@redhat.com>
In order to implement indirect sampler loads, we don't
want to match on a VGPR load but an SGPR one for constants,
as we cannot feed VGPRs to the sampler only SGPRs.
this should be applicable for llvm 3.7 as well.
llvm-svn: 243294
Summary:
The MUBUF addr64 bit has been removed on VI, so we must use FLAT
instructions when the pointer is stored in VGPRs.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11067
llvm-svn: 242673
This can be done only with moves which theoretically
will optimize better later.
Although this transform increases the instruction count,
it should be code size / cycle count neutral in the worst
VALU case. It also seems to slightly improve a couple
of testcases due to other DAG combines this exposes.
This is probably slightly worse for the SALU case, so
it might be better to handle this during moveToVALU,
although then you lose some simplifications like
the load width reducing in the simple testcase.
llvm-svn: 242177
If the read2 produced was supposed to be writing into a
super register, it would use the wrong subregister indices.
Fix this by inserting copies, so we only ever write to a vreg_64.
Run the register coalescer again to clean this up, although this
isn't ideal and often does result in an extra move.
Also remove the assert that offset1 > offset0.
There isn't a real reason to not allow this other than a minor
convenience in the compiler, and it doesn't seem worth the effort
of avoiding it.
llvm-svn: 242174
The two-address instruction pass will convert these back to v_mad_f32
if necessary.
Differential Revision: http://reviews.llvm.org/D11060
llvm-svn: 242038
The motivation is to allow GatherAllAliases / FindBetterChain
to not give up on dependent loads of a pointer from constant memory.
This is important for AMDGPU, because most loads are pointers
derived from a load of a kernel argument from constant memory.
llvm-svn: 241948
We don't have a good way to detect most situations where
DS offsets are usable on SI, so add an option to force using
them even if unsafe for debugging performance problems.
llvm-svn: 241462
A call to removeEmptySubranges() is necessary after every operation that
potentially removes all segments from a subregister range; this case in
the register coalescer was missing.
llvm-svn: 241027
Summary: We need to set MTYPE = 2 for VI shaders when targeting the HSA runtime.
Reviewers: arsenm
Differential Revision: http://reviews.llvm.org/D10777
llvm-svn: 240841
Summary:
This way the function symbol points to the start of amd_kernel_code_t
rather than the start of the function.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10705
llvm-svn: 240829
If pseudoToMCOpcode failed, we would return the original opcode, so operands
would be swapped, but the instruction would remain the same.
It resulted in LSHLREV a, b ---> LSHLREV b, a.
This fixes Glamor text rendering and
piglit/arb_sample_shading-builtin-gl-sample-mask on VI.
This is a candidate for stable branches.
v2: the test was simplified by Tom Stellard
llvm-svn: 240824
Reapply r239539. Don't assume the collected number of
stores is the same vector size. Just take the first N
stores to fill the vector.
llvm-svn: 239825
