Enable full support for the debug info. Recommit to fix the emission of
the not required closing brace.
Differential revision: https://reviews.llvm.org/D46189
llvm-svn: 351972
Summary: Enable full support for the debug info.
Reviewers: echristo
Subscribers: jholewinski, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46189
llvm-svn: 351846
Summary: Initial function labels must follow the debug location for the correct relocation info generation.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D45784
llvm-svn: 351843
to reflect the new license. These used slightly different spellings that
defeated my regular expressions.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351648
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The patch adds a possibility to make library calls on NVPTX.
An important thing about library functions - they must be defined within
the current module. This basically should guarantee that we produce a
valid PTX assembly (without calls to not defined functions). The one who
wants to use the libcalls is probably will have to link against
compiler-rt or any other implementation.
Currently, it's completely impossible to make library calls because of
error LLVM ERROR: Cannot select: i32 = ExternalSymbol '...'. But we can
lower ExternalSymbol to TargetExternalSymbol and verify if the function
definition is available.
Also, there was an issue with a DAG during legalisation. When we expand
instruction into libcall, the inner call-chain isn't being "integrated"
into outer chain. Since the last "data-flow" (call retval load) node is
located in call-chain earlier than CALLSEQ_END node, the latter becomes
a leaf and therefore a dead node (and is being removed quite fast).
Proposed here solution relies on another data-flow pseudo nodes
(ProxyReg) which purpose is only to keep CALLSEQ_END at legalisation and
instruction selection phases - we remove the pseudo instructions before
register scheduling phase.
Patch by Denys Zariaiev!
Differential Revision: https://reviews.llvm.org/D34708
llvm-svn: 350069
NVPTXAsmPrinter::doInitialization() was creating an NVPTXSubtarget on
the stack. This object is huge, about 80kb. Also it's slow to create.
And it's all redundant; we have one in NVPTXTargetMachine anyway!
llvm-svn: 349982
The change is an effort to split and refactor abandoned
D34708 into smaller parts.
Here the behaviour of unsupported instructions is changed
to match the behaviour of explicit intrinsics calls.
Currently LLVM crashes with:
> Assertion getInstruction() && "Not a call or invoke instruction!" failed.
With this patch LLVM produces a more sensible error message:
> Cannot select: ... i32 = ExternalSymbol'__foobar'
Author: Denys Zariaiev <denys.zariaiev@gmail.com>
Differential Revision: https://reviews.llvm.org/D55145
llvm-svn: 349213
If a module has function references, but no functions
themselves, we may end up never calling runOnMachineFunction
and therefore would never initialize nvptxSubtarget field
which would eventually cause a crash.
Instead of relying on nvptxSubtarget being initialized by
one of the methods, retrieve subtarget info directly.
Differential Revision: https://reviews.llvm.org/D55580
llvm-svn: 348952
Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.
Differential Revision: https://reviews.llvm.org/D50141
llvm-svn: 348585
Summary:
If the output of debug directives only is requested, we should drop
emission of ',debug' option from the target directive. Required for
supporting of nvprof profiler.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46061
llvm-svn: 348497
Summary:
We may end up with not emitted debug directives at the end of the module
emission. Patch fixes this problem emitting those last directives the
end of the module emission.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D54320
llvm-svn: 348495
This reverts commit r345972. Need to update the description + possibly
to update the patch itself after discussion with Eric Christofer.
llvm-svn: 346508
MachineFunction can only be used in code using lib/CodeGen, hence we
can keep a more specific reference to LLVMTargetMachine rather than just
TargetMachine around.
Do the same for references in ScheduleDAG and RegUsageInfoCollector.
llvm-svn: 346183
The main caller of this already has an MVT and several targets called getSimpleVT inside without checking isSimple. This makes the simpleness explicit.
llvm-svn: 346180
Summary:
If the output of debug directives only is requested, we should drop
emission of ',debug' option from the target directive. Required for
supporting of nvprof profiler.
Reviewers: probinson, echristo, dblaikie
Subscribers: Hahnfeld, jholewinski, llvm-commits, JDevlieghere, aprantl
Differential Revision: https://reviews.llvm.org/D46061
llvm-svn: 345972
Summary:
If the instruction in the eliminateFrameIndex function is a DBG_VALUE
instruction, it requires special processing. The frame register is set
to VRFrame and the offset is based on the object offset.
The code is similar to the code used in
lib/CodeGen/PrologEpilogInserter.cpp.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D53657
llvm-svn: 345269
Summary:
Changes all uses of minnan/maxnan to minimum/maximum
globally. These names emphasize that the semantic difference between
these operations is more than just NaN-propagation.
Reviewers: arsenm, aheejin, dschuff, javed.absar
Subscribers: jholewinski, sdardis, wdng, sbc100, jgravelle-google, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53112
llvm-svn: 345218
Summary:
If the target does not support `.asciz` and `.ascii` directives, the
strings are represented as bytes and each byte is placed on the new line
as a separate byte directive `.b8 <data>`. NVPTX target allows to
represent the vector of the data of the same type as a vector, where
values are separated using `,` symbol: `.b8 <data1>,<data2>,...`. This
allows to reduce the size of the final PTX file. Ptxas tool includes ptx
files into the resulting binary object, so reducing the size of the PTX
file is important.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D45822
llvm-svn: 345142
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
According to PTX ISA .volatile has the same memory synchronization
semantics as .relaxed.sys, so it can be used to implement monotonic
atomic loads and stores. This is important for OpenMP's atomic
construct where
- 'read's and 'write's are lowered to atomic loads and stores, and
- an update of float or double types are lowered into a cmpxchg loop.
(Note that PTX could do better because it has atom.add.f{32,64} but
LLVM's atomicrmw instruction only allows integer types.)
Higher levels of atomicity (like acquire and release) need additional
synchronization properties which were added with PTX ISA 6.0 / sm_70.
So using these instructions still results in an error.
Differential Revision: https://reviews.llvm.org/D50391
llvm-svn: 339316
Summary:
NVPTX target dos not use register-based frame information. Instead it
relies on the artificial local_depot that is used instead of the frame
and the data for variables must be emitted relatively to this
local_depot.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45963
llvm-svn: 338039
A TableGen instruction record usually contains a DAG pattern that will
describe the SelectionDAG operation that can be implemented by this
instruction. However, there will be cases where several different DAG
patterns can all be implemented by the same instruction. The way to
represent this today is to write additional patterns in the Pattern
(or usually Pat) class that map those extra DAG patterns to the
instruction. This usually also works fine.
However, I've noticed cases where the current setup seems to require
quite a bit of extra (and duplicated) text in the target .td files.
For example, in the SystemZ back-end, there are quite a number of
instructions that can implement an "add-with-overflow" operation.
The same instructions also need to be used to implement just plain
addition (simply ignoring the extra overflow output). The current
solution requires creating extra Pat pattern for every instruction,
duplicating the information about which particular add operands
map best to which particular instruction.
This patch enhances TableGen to support a new PatFrags class, which
can be used to encapsulate multiple alternative patterns that may
all match to the same instruction. It operates the same way as the
existing PatFrag class, except that it accepts a list of DAG patterns
to match instead of just a single one. As an example, we can now define
a PatFrags to match either an "add-with-overflow" or a regular add
operation:
def z_sadd : PatFrags<(ops node:$src1, node:$src2),
[(z_saddo node:$src1, node:$src2),
(add node:$src1, node:$src2)]>;
and then use this in the add instruction pattern:
defm AR : BinaryRRAndK<"ar", 0x1A, 0xB9F8, z_sadd, GR32, GR32>;
These SystemZ target changes are implemented here as well.
Note that PatFrag is now defined as a subclass of PatFrags, which
means that some users of internals of PatFrag need to be updated.
(E.g. instead of using PatFrag.Fragment you now need to use
!head(PatFrag.Fragments).)
The implementation is based on the following main ideas:
- InlinePatternFragments may now replace each original pattern
with several result patterns, not just one.
- parseInstructionPattern delays calling InlinePatternFragments
and InferAllTypes. Instead, it extracts a single DAG match
pattern from the main instruction pattern.
- Processing of the DAG match pattern part of the main instruction
pattern now shares most code with processing match patterns from
the Pattern class.
- Direct use of main instruction patterns in InferFromPattern and
EmitResultInstructionAsOperand is removed; everything now operates
solely on DAG match patterns.
Reviewed by: hfinkel
Differential Revision: https://reviews.llvm.org/D48545
llvm-svn: 336999
It's a bit neater to write T.isIntOrPtrTy() over `T.isIntegerTy() ||
T.isPointerTy()`.
I used Python's re.sub with this regex to update users:
r'([\w.\->()]+)isIntegerTy\(\)\s*\|\|\s*\1isPointerTy\(\)'
llvm-svn: 336462
We don't want to prevent inlining because of target-cpu and -features
attributes that were added to newer versions of LLVM/Clang: There are
no incompatible functions in PTX, ptxas will throw errors in such cases.
Differential Revision: https://reviews.llvm.org/D47691
llvm-svn: 334904
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
This reapplies commits: r330271, r330592, r330779.
[DEBUG] Initial adaptation of NVPTX target for debug info emission.
Summary:
Patch adds initial emission of the debug info for NVPTX target.
Currently, only .file and .loc directives are emitted, everything else is
commented out to not break the compilation of Cuda.
llvm-svn: 332689
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Const/local/shared address spaces are all < 4GB and we can always use
32-bit pointers to access them. This has substantial performance impact
on kernels that uses shared memory for intermediary results.
The feature is disabled by default.
Differential Revision: https://reviews.llvm.org/D46147
llvm-svn: 331941
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
This appears to have some issues associated with the file directive output
causing multiple global symbols with the name "file" to be emitted into a
startup section. I'm investigating more specific causes and working with the
original author.
This reverts commit r330271.
Also Revert "[DEBUGINFO, NVPTX] Add the test for the debug info of the local"
This reverts commit r330592 and the follow up of 330779 as the testcase is dependent upon r330271.
llvm-svn: 331237
Since PTX has grown a <2 x half> datatype vectorization has become more
important. The late LoadStoreVectorizer intentionally only does loads
and stores, but now arithmetic has to be vectorized for optimal
throughput too.
This is still very limited, SLP vectorization happily creates <2 x half>
if it's a legal type but there's still a lot of register moving
happening to get that fed into a vectorized store. Overall it's a small
performance win by reducing the amount of arithmetic instructions.
I haven't really checked what the loop vectorizer does to PTX code, the
cost model there might need some more tweaks. I didn't see it causing
harm though.
Differential Revision: https://reviews.llvm.org/D46130
llvm-svn: 331035
There's no direct instruction for this, but it's trivially implemented
with two movs. Without this the code generator just dies when
encountering a shufflevector.
Differential Revision: https://reviews.llvm.org/D46116
llvm-svn: 330948
