These are added for compatibility with XLC. They are similar to
vec_cts and vec_ctu except that the result is a doubleword vector
regardless of the parameter type.
Using `cmake` >=3.20 results in many warnings about this new policy. This change silences the warnings by explicitly declaring use of the "OLD" behavior.
This policy currently affects only one place: the `tablegen()` function in `TableGen.cmake`.
Differential Revision: https://reviews.llvm.org/D101083
In cases when ScalarizationCostPassed has no value, UINT_MAX is actually used
for cost estimation in `return ScalarCalls * ScalarCost + ScalarizationCost`.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D101099
The function AArch64TargetLowering::LowerFixedLengthVectorIntDivideToSVE
previously assumed the operands were full vectors, but this is not
always true. This function would produce bogus if the division operands
are not full vectors, resulting in miscompiles when dividing 8-bit or
16-bit vectors.
The fix is to perform an extend + div + truncate for non-full vectors,
instead of the usual unpacking and unzipping logic. This is an additive
change which reduces the non-full integer vector divisions to a pattern
recognised by the existing lowering logic.
For future reference, an example of code that would miscompile before
this patch is below:
1 int8_t foo(unsigned N, int8_t *a, int8_t *b, int8_t *c) {
2 int8_t result = 0;
3 for (int i = 0; i < N; ++i) {
4 result += (a[i] / b[i]) / c[i];
5 }
6 return result;
7 }
Differential Revision: https://reviews.llvm.org/D100370
Several tests had a typo where they mentioned sgpr17 twice instead of
sgpr17 and sgpr27. This had a significant effect on the
"scavenge_sgpr_pei_no_sgprs" tests because there was actually an sgpr
available, namely sgpr27.
Differential Revision: https://reviews.llvm.org/D100960
Deleted HexagonMapAsm2IntrinV65.gen.td that wasn't included anywhere,
moved V6_vrmpy*_rtt* patterns to HexagonIntrinsics.td.
Touch CMakeLists.txt to force re-cmake (somehow the unused file was
listed as a dependency in the generated makefiles).
The values of registers in inactive lanes needs to be saved during
function calls.
Save all registers used for whole wave mode, similar to how it is done
for VGPRs that are used for SGPR spilling.
Differential Revision: https://reviews.llvm.org/D99429
This patch adds support for both scalable- and fixed-length vector code
lowering of the llvm.minnum and llvm.maxnum intrinsics to the equivalent
RVV instructions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D101035
This recommits 4f5da356ff35a218f23f0b0c4d08aee90da7de6e, including
explicit implementations of move a constructor and deleted copy
constructors/assignment operators, to fix failures with some compilers.
This reverts the revert 74854d00e854196445727a49df58fe5768d9ed5b.
Previous build failures were caused by an error in bitcode reading and
writing for DIArgList metadata, which has been fixed in e5d844b587.
There were also some unnecessary asserts that were being triggered on
certain builds, which have been removed.
This reverts commit dad5caa59e6b2bde8d6cf5b64a972c393c526c82.
The previous D101039 didn't fix the SmallSet insertion issue, due to we
always return false for the comparison between 2 different nonnull BBs.
This patch makes the the comparison to be complete by comparing `MBB`
first, so that we can always get the invariant order by a single
operator.
If we are using a simplified value, we need to add an extra
dependency this value , because changes to the class of the
simplified value may require us to invalidate any decision based on
that value.
This is done by adding such values as additional users, however the
current code does not excludes temporary instructions.
At the moment, this means that we miss those dependencies for
phi-of-ops, because they are temporary instructions at this point. We
instead need to add the extra dependencies to the root instruction of
the phi-of-ops.
This patch pushes the responsibility of adding extra users to the
callers of createExpression & performSymbolicEvaluation. At those
points, it is clearer which real instruction to pick.
Alternatively we could either pass the 'real' instruction as additional
argument or use another map, but I think the approach in the patch makes
things a bit easier to follow.
Fixes PR35074.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D99987
Make following function return void:
addLabel()
addSectionLabel()
addSectionDelta()
This aligns with other attributes adding functions.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D101022
ConstantFoldingMIRBuilder was an experiment which is not used for
anything. The constant folding functionality is now part of
CSEMIRBuilder.
Differential Revision: https://reviews.llvm.org/D101050
EMITBKEY is emitted for PAC-RET+bkey, which is a non machine instructions.
PR: 49957
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D100996
Fixes PR47627
This fix suppresses rerolling a loop which has an unrerollable
instruction.
Sample IR for the explanation below:
```
define void @foo([2 x i32]* nocapture %a) {
entry:
br label %loop
loop:
; base instruction
%indvar = phi i64 [ 0, %entry ], [ %indvar.next, %loop ]
; unrerollable instructions
%stptrx = getelementptr inbounds [2 x i32], [2 x i32]* %a, i64 %indvar, i64 0
store i32 999, i32* %stptrx, align 4
; extra simple arithmetic operations, used by root instructions
%plus20 = add nuw nsw i64 %indvar, 20
%plus10 = add nuw nsw i64 %indvar, 10
; root instruction 0
%ldptr0 = getelementptr inbounds [2 x i32], [2 x i32]* %a, i64 %plus20, i64 0
%value0 = load i32, i32* %ldptr0, align 4
%stptr0 = getelementptr inbounds [2 x i32], [2 x i32]* %a, i64 %plus10, i64 0
store i32 %value0, i32* %stptr0, align 4
; root instruction 1
%ldptr1 = getelementptr inbounds [2 x i32], [2 x i32]* %a, i64 %plus20, i64 1
%value1 = load i32, i32* %ldptr1, align 4
%stptr1 = getelementptr inbounds [2 x i32], [2 x i32]* %a, i64 %plus10, i64 1
store i32 %value1, i32* %stptr1, align 4
; loop-increment and latch
%indvar.next = add nuw nsw i64 %indvar, 1
%exitcond = icmp eq i64 %indvar.next, 5
br i1 %exitcond, label %exit, label %loop
exit:
ret void
}
```
In the loop rerolling pass, `%indvar` and `%indvar.next` are appended
to the `LoopIncs` vector in the `LoopReroll::DAGRootTracker::findRoots`
function.
Before this fix, two instructions with `unrerollable instructions`
comment above are marked as `IL_All` at the end of the
`LoopReroll::DAGRootTracker::collectUsedInstructions` function,
as well as instructions with `extra simple arithmetic operations`
comment and `loop-increment and latch` comment. It is incorrect
because `IL_All` means that the instruction should be executed in all
iterations of the rerolled loop but the `store` instruction should
not.
This fix rejects instructions which may have side effects and don't
belong to def-use chains of any root instructions and reductions.
See https://bugs.llvm.org/show_bug.cgi?id=47627 for more information.
The previous condition in the assert was over strict. We ought to allow
the same immidiate value being loaded more than once. The intention for
the assert is to check the same AMX register uses multiple different
immidiate shapes. So this fix supposes to be NFC.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D101124
We request no intersections between AMX instructions and their shapes'
def when we insert ldtilecfg. However, this is not always ture resulting
from not only users don't follow AMX API model, but also optimizations.
This patch adds a mechanism that tries to hoist AMX shapes' def as well.
It only hoists shapes inside a BB, we can improve it for cases across
BBs in future. Currently, it only hoists shapes of which all sources' def
above the first AMX instruction. We can improve for the case that only
source that moves an immediate value to a register below AMX instruction.
Differential Revision: https://reviews.llvm.org/D101067
Add __uintr_frame structure and use UIRET instruction for functions with
x86 interrupt calling convention when UINTR is present.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D99708
This is mostly NFC except that for end of BB not previous slot is used.
Idx is used to find a def of sibling live interval in that slot.
The def on end of MBB and on previous slot of end MBB should be the same,
so it should be NFC.
Reviewers: reames, qcolombet, MatzeB, wmi, rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100922
9931b1f7a4785b6a17fb87b81a3546d61d0cbca1 switched this to checking for
the two specific subtargets, instead of the dedicated feature. This
broke supporting functions which force added the feature when emitting
targets that do not actually support them. This stil does not work for
the targets that use the gfx6/7 or gfx10 encodings.
The Linux kernel objtool diagnostic `call without frame pointer save/setup`
arise in multiple instrumentation passes (asan/tsan/gcov). With the mechanism
introduced in D100251, it's trivial to respect the command line
-m[no-]omit-leaf-frame-pointer/-f[no-]omit-frame-pointer, so let's do it.
Fix: https://github.com/ClangBuiltLinux/linux/issues/1236 (tsan)
Fix: https://github.com/ClangBuiltLinux/linux/issues/1238 (asan)
Also document the function attribute "frame-pointer" which is long overdue.
Differential Revision: https://reviews.llvm.org/D101016
Background:
CFGStackify's [[ 398f253400/llvm/lib/Target/WebAssembly/WebAssemblyCFGStackify.cpp (L1481-L1540) | fixEndsAtEndOfFunction ]] fixes block/loop/try's return
type when the end of function is unreachable and the function return
type is not void. So if a function returns i32 and `block`-`end` wraps the
whole function, i.e., the `block`'s `end` is the last instruction of the
function, the `block`'s return type should be i32 too:
```
block i32
...
end
end_function
```
If there are consecutive `end`s, this signature has to be propagate to
those blocks too, like:
```
block i32
...
block i32
...
end
end
end_function
```
This applies to `try`-`end` too:
```
try i32
...
catch
...
end
end_function
```
In case of `try`, we not only follow consecutive `end`s but also follow
`catch`, because for the type of the whole `try` to be i32, both `try`
and `catch` parts have to be i32:
```
try i32
...
block i32
...
end
catch
...
block i32
...
end
end
end_function
```
---
Previously we only handled consecutive `end`s or `end` before a `catch`.
But now we have `delegate`, which serves like `end` for
`try`-`delegate`. So we have to follow `delegate` too and mark its
corresponding `try` as i32 (the function's return type):
```
try i32
...
catch
...
try i32 ;; Here
...
delegate N
end
end_function
```
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D101036
