These two instructions are VOP3P and have op_sel_hi bits,
however do not use op_sel_hi. That is recommended to set
unused op_sel_hi bits to 1. However, we cannot decode
both representations with 1 and 0 if bits are set to
default value 1. If bits are set to be ignored with '?'
initializer then encoding defaults them to 0.
The patch is a hack to force ignored '?' bits to 1 on
encoding for these instructions.
There is still canonicalization happens on disasm print
if incoming values are non-default, so that disasm output
does not match binary input, but this is pre-existing
problem for all instructions with '?' bits.
Fixes: SWDEV-272540
Differential Revision: https://reviews.llvm.org/D96543
This patch adds a pass to replace calls to vector intrinsics (i.e., LLVM
intrinsics operating on vector operands) with calls to a vector library.
Currently, calls to LLVM intrinsics are only replaced with calls to vector
libraries when scalar calls to intrinsics are vectorized by the Loop- or
SLP-Vectorizer.
With this pass, it is now possible to replace calls to LLVM intrinsics
already operating on vector operands, e.g., if such code was generated
by MLIR. For the replacement, information from the TargetLibraryInfo,
e.g., as specified via -vector-library is used.
This is a re-try of the original commit 2303e93e66 that was reverted
due to pass manager problems. Other minor changes have also been made.
Differential Revision: https://reviews.llvm.org/D95373
explicitly emitting retainRV or claimRV calls in the IR
Background:
This fixes a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.attachedcall" to calls,
which indicates the call is implicitly followed by a marker
instruction and an implicit retainRV/claimRV call that consumes the
call result. In addition, it emits a call to
@llvm.objc.clang.arc.noop.use, which consumes the call result, to
prevent the middle-end passes from changing the return type of the
called function. This is currently done only when the target is arm64
and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
claimRV is attached to the call since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since the ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if retainRV is attached to the call and
does nothing if claimRV is attached to it.
- SCCP refrains from replacing the return value of a call with a
constant value if the call has the operand bundle. This ensures the
call always has at least one user (the call to
@llvm.objc.clang.arc.noop.use).
- This patch also fixes a bug in replaceUsesOfNonProtoConstant where
multiple operand bundles of the same kind were being added to a call.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
The gold LTO plugin uses a set of hooks to implements emit-llvm and capture intermediate file generated during LTO. The hooks are called by each lto backend thread with a taskID as argument to differentiate between threads and tasks. Currently, all threads are overwriting the same file which results into only the intermediate output of the last backend thread to be preserved. This diff encodes the taskID into the filename.
Reviewed By: tejohnson, wenlei
Differential Revision: https://reviews.llvm.org/D96173
I believe I've covered all orderings of splat operands here. Better
canonicalization in lowering might help reduce this. I did not handle
the immediate adjustments needed for set(u)gt/set(u)lt.
Testing here is limited to byte types because the scalable vector
type used for masks for the store is calculated assuming 8 byte
elements. But for the setcc its based on the element count of the
container type for the setcc input. So they don't agree. We'll need
to enhanced D96352 to handle this I think.
Differential Revision: https://reviews.llvm.org/D96443
Unlike scalable vectors, I'm only using a ComplexPattern for
the immediate itself. The vmv_v_x is matched explicitly. We igore
the VL argument when matching a binary operator, but we do check
it when matching splat directly.
I left out tests for vXi64 as they fail on rv32 right now.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96365
Implements same logis as in SelectionDAG.
G_FMINNUM_IEEE and G_FMAXNUM_IEEE are never SNaN by definition and
never NaN when one operand is known non-NaN and other known non-SNaN.
G_FMINNUM and G_FMAXNUM are never NaN/SNaN when one of the operands
is known non-NaN/SNaN.
Differential Revision: https://reviews.llvm.org/D91716
Allow different GICustomOperandRenderers to use the same RendererFn.
This avoids the need for targets to define a bunch of identical C++
renderer functions with different names.
Without this fix TableGen would have emitted code that tried to define
the GICR enumeration with duplicate enumerators.
Differential Revision: https://reviews.llvm.org/D96587
Our current lowering of VMOVNT goes via a shuffle vector of the form
<0, N, 2, N+2, 4, N+4, ..>. That can of course also be a single input
shuffle of the form <0, 0, 2, 2, 4, 4, ..>, where we use a VMOVNT to
insert a vector into the top lanes of itself. This adds lowering of that
case, re-using the existing isVMOVNMask.
Differential Revision: https://reviews.llvm.org/D96065
Changes `getScalarizationOverhead` to return an invalid cost for scalable VFs
and adds some simple tests for loops containing a function for which
there is a vectorized variant available.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D96356
The vector reduction intrinsics started life as experimental ops, so backend support
was lacking. As part of promoting them to 1st-class intrinsics, however, codegen
support was added/improved:
D58015
D90247
So I think it is safe to now remove this complication from IR.
Note that we still have an IR-level codegen expansion pass for these as discussed
in D95690. Removing that is another step in simplifying the logic. Also note that
x86 was already unconditionally forming reductions in IR, so there should be no
difference for x86.
I spot checked a couple of the tests here by running them through opt+llc and did
not see any asm diffs.
If we do find functional differences for other targets, it should be possible
to (at least temporarily) restore the shuffle IR with the ExpandReductions IR
pass.
Differential Revision: https://reviews.llvm.org/D96552
The individual recipes have been updated to manage their operands using
VPUser a while back. Now that the transition is done, we can instead
make VPRecipeBase a VPUser and get rid of the toVPUser helper.
Change parseVTypeI function to Make the added vset instruction test cases report more concrete error message.
Differential Revision: https://reviews.llvm.org/D96218
This patch changes the VecDesc struct to use ElementCount
instead of an unsigned VF value, in preparation for
future work that adds support for vectorized versions of
math functions using scalable vectors. Since all I'm doing
in this patch is switching the type I believe it's a
non-functional change. I changed getWidestVF to now return
both the widest fixed-width and scalable VF values, but
currently the widest scalable value will be zero.
Differential Revision: https://reviews.llvm.org/D96011
Include x86 intrinsics only when compiling for x86_64
or i386. _MSC_VER no longer implies x86.
Reviewed By: gchatelet
Differential Revision: https://reviews.llvm.org/D96498
This patch extends the initial fixed-length vector support to include
smin, smax, umin, and umax.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96491
Before, the first mention of LLVM's license on the developer policy page stated
that LLVM's license is Apache 2. This patch makes that more accurate by
mentioning the LLVM exception this first time the LLVM license is discussed on
that page, i.e. Apache-2.0 with LLVM-exception.
Technically, the correct SPDX identifier for LLVM's license is 'Apache-2.0 WITH
LLVM-exception', but I thought that writing the 'WITH' in lower case made the
paragraph easier to read without reducing clarity.
Differential Revision: https://reviews.llvm.org/D96482
To align with https://reviews.llvm.org/D95547, we need to add brackets for context id before initializing the `SampleContext`.
Also added test cases for extended binary format from llvm-profgen side.
Differential Revision: https://reviews.llvm.org/D95929
This fixes an overly restrictive assumption that the vector is a FixedVectorType,
in code that tries to calculate the cost of a cast operation when splitting
a too-wide vector. The algorithm works the same for scalable vectors, so this
patch removes the cast<FixedVectorType>.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D96253
COST(zext (<4 x i32> load(...) to <4 x i64>)) != 0 when
<4 x i64> is an illegal result type that requires splitting
of the operation.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D96250
This fixes coff-dwarf.test on some build bots.
The test relies on the sort order and prefers main (StorageClass: External) to .text (StorageClass: Static).
I previously assumed `delegate`'s immediate argument computation
followed a different rule than that of branches, but we agreed to make
it the same
(https://github.com/WebAssembly/exception-handling/issues/146). This
removes the need for a separate `DelegateStack` in both CFGStackify and
InstPrinter.
When computing the immediate argument, we use a different function for
`delegate` computation because in MIR `DELEGATE`'s instruction's
destination is the destination catch BB or delegate BB, and when it is a
catch BB, we need an additional step of getting its corresponding `end`
marker.
Reviewed By: tlively, dschuff
Differential Revision: https://reviews.llvm.org/D96525
- Usual cross-compilation fix: s/target_/current_/g
- Define _LIBUNWIND_IS_NATIVE_ONLY to enable unwinding past
functions with return pointer authentication.
- Android needs two libunwind static libraries: one with symbols exported and
one without. These both need to be in the same build tree so
the libunwind_hermetic_static_library configuration option doesn't
help here. Replace it with build rules that build both libraries.
- Install the libraries in the location that Android expects them to be.
Differential Revision: https://reviews.llvm.org/D96563
Switch some for loops to just use the begin()/end() implementations
in the InfoByHwMode struct.
Add a method to insert into the map for the one case that was
modifying the map directly.
The wrong record field number was being used in bitcode decoding,
which broke a self-hosted LTO build. (Yet, somehow, this _doesn't_
seem to have broken simple bitcode encode/decode roundtrip tests, and
I'm not sure why...)
Fixes commit d06ab79816785fa362e7d96d7a398bea8064cba7
The builder was using the extend user as the insertion point, which meant that
we were incorrectly "moving" the load from its original position, and therefore
could violate memory operation ordering.
Before d08bd13ac8a560c4645e17e192ca07e1bdcd2895, only `SymbolRef::ST_Function`
symbols were used for .symtab symbolization. That commit added a `"DATA"` mode
to llvm-symbolizer which used `SymbolRef::ST_Data` symbols for symbolization.
Since function and data symbols have different addresses, we don't need to
differentiate the two modes. This patches unifies the two modes to simplify
code.
`"DATA"` is used by `compiler-rt/lib/sanitizer_common/sanitizer_symbolizer_libcdep.cpp`.
`check-hwasan` and `check-tsan` have runtime tests.
Differential Revision: https://reviews.llvm.org/D96322
The motivation for this is that I'm looking at an example that uses shifts as induction variables. There's lots of other omissions, but one of the first I noticed is that we can't compute tight known bits. (This indirectly causes SCEV's range analysis to produce very poor results as well.)
Differential Revision: https://reviews.llvm.org/D96440
Summary:
The negative test (with the feature being added disabled) caused MSAN failure and that's the added feature is supposed to fix. Therefore the negative test code is being removed.
This patch handles cast-like insert_subvector & extract_subvector
in which case:
1. index starts from 0.
2. inserting a fixed-width vector into a scalable vector,
or extracting a fixed-width vector from a scalable vector.
Reviewed By: craig.topper, frasercrmck
Differential Revision: https://reviews.llvm.org/D96352
