Summary:
As far as I can tell, the real bug causing the issue was fixed in
r230533. SCEVExpander should mark an increment operation as nuw or nsw
only if it can *prove* that the operation does not overflow. There
shouldn't be any situation where we have to do something different
because of no-wrap flags generated by SCEVExpander.
Revert "IndVarSimplify: Allow LFTR to fire more often"
This reverts commit 1ade0f0faa98877b688e0b9da58e876052c1e04e (SVN: 222213).
Revert "IndVarSimplify: Don't let LFTR compare against a poison value"
This reverts commit c0f2b8b528d8a37b0a1522aae90af649d6357eb5 (SVN: 217102).
Reviewers: majnemer, atrick, spatel
Differential Revision: http://reviews.llvm.org/D7979
llvm-svn: 230921
This has the nice property of compiling down to memcmp when feasible. An empty
ArrayRef can have a nullptr in its Data field. I didn't find anything in the
standard speaking against std::equal(nullptr, nullptr, nullptr) begin valid but
MSVC asserts. The way libstdc++ lowers std::equal down to memcmp also makes
invoking std::equal with a nullptr undefined behavior so checking is the only
way to be safe.
The extra check doesn't cost us perf either because we're essentially peeling
the loop header away from the rotated loop.
llvm-svn: 230920
With initializer lists there is a really neat idiomatic way to write
this, 'ArrayRef.equals({1, 2, 3, 4, 5})'. Remove the equal method which
always had a hard limit on the number of arguments. I considered
rewriting it with variadic templates but that's not really a good fit
for a function with homogeneous arguments.
'ArrayRef == {1, 2, 3, 4, 5}' would've been even more awesome, but C++11
doesn't allow init lists with binary operators.
llvm-svn: 230907
Such edges are zero matrix, and they bring no additional info to the
allocation problem, apart from contributing to nodes' degree. Removing
those edges is expected to improve allocation time.
Tune the spill cost comparison, as this gives better average performances
now that the nodes' degrees has changed.
llvm-svn: 230904
There are static variables of this around that we really want to go
into a read-only segment. Sadly compilers are not smart enough to figure
that out without constexpr.
llvm-svn: 230895
We were missing a check for the following fold in DAGCombiner:
// fold (fmul (fmul x, c1), c2) -> (fmul x, (fmul c1, c2))
If 'x' is also a constant, then we shouldn't do anything. Otherwise, we could end up swapping the operands back and forth forever.
This should fix:
http://llvm.org/bugs/show_bug.cgi?id=22698
Differential Revision: http://reviews.llvm.org/D7917
llvm-svn: 230884
r228631 stopped using `DW_OP_piece` inside `DIExpression`s in the IR,
but it apparently missed updating these testcases. Caught by verifier
checks for `MDExpression` while working on moving the new hierarchy into
place.
llvm-svn: 230882
There are two types of files in the old (current) debug info schema.
!0 = !{!"some/filename", !"/path/to/dir"}
!1 = !{!"0x29", !0} ; [ DW_TAG_file_type ]
!1 has a wrapper class called `DIFile` which inherits from `DIScope` and
is referenced in 'scope' fields.
!0 is called a "file node", and debug info nodes with a 'file' field
point at one of these directly -- although they're built in `DIBuilder`
by sending in a `DIFile` and reaching into it.
In the new hierarchy, I unified these nodes as `MDFile` (which `DIFile`
is a lightweight wrapper for) in r230057. Moving the new hierarchy into
place (and upgrading testcases) caused CodeGen/X86/unknown-location.ll
to start failing -- apparently "0x29" was previously showing up in the
linetable as a filename, causing:
.loc 2 4 3
(where 2 points at filename "0x29") instead of:
.loc 1 4 3
(where 1 points at the actual filename).
Change the testcase to use the old schema correctly.
llvm-svn: 230880
Start using `TempMDNode` in `DIDescriptor::replaceAllUsesWith()`
(effectively `std::unique_ptr<MDNode, MDNode::deleteTemporary>`).
Besides making ownership more explicit, this prepares for when
`DIDescriptor` refers to nodes that are *not* `MDTuple`. The old logic
for "replacing" a node with itself used `MDNode::get()` to return a new
(uniqued) `MDTuple`, while the new logic just defers to
`MDNode::replaceWithUniqued()` (which also typically saves an allocation
and RAUW traffic by mutating the temporary in place).
llvm-svn: 230879
While gaining practical experience hand-updating CHECK lines (for moving
the new debug info hierarchy into place), I learnt a few things about
CHECK-ability of the specialized node assembly output.
- The first part of a `CHECK:` is to identify the "right" node (this
is especially true if you intend to use the new `CHECK-SAME`
feature, since the first CHECK needs to identify the node correctly
before you can split the line).
- If there's a `tag:`, it should go first.
- If there's a `name:`, it should go next (followed by the
`linkageName:`, if any).
- If there's a `scope:`, it should follow after that.
- When a node type supports multiple DW_TAGs, but one is implied by
its name and is overwhelmingly more common, the `tag:` field is
terribly uninteresting unless it's different.
- `MDBasicType` is almost always `DW_TAG_base_type`.
- `MDTemplateValueParameter` is almost always
`DW_TAG_template_value_parameter`.
- Printing `name: ""` doesn't improve CHECK-ability, and there are far
more nodes than I realized that are commonly nameless.
- There are a few other fields that similarly aren't very interesting
when they're empty.
This commit updates the `AsmWriter` as suggested above (and makes
necessary changes in `LLParser` for round-tripping).
llvm-svn: 230877
Properly escape string fields in metadata. I've added a spot-check with
direct coverage for `MDFile::getFilename()`, but we'll get more coverage
once the hierarchy is moved into place (since this comes up in various
checked-in testcases).
I've replicated the `if` logic using the `ShouldSkipEmpty` flag
(although a follow-up commit is going to change how often this flag is
specified); no NFCI other than escaping the string fields.
llvm-svn: 230875
Extract logic for escaping a string field in the new debug info
hierarchy from `GenericDebugNode`. A follow-up commit will use it far
more widely (hence the dead code for `ShouldSkipEmpty`).
llvm-svn: 230873
Fix `MDScope::getFile()` so that it correctly returns a valid `MDFile`
even when it's an instance of `MDFile`. This logic is necessary because
of r230057. I'm working on moving the new hierarchy into place
out-of-tree (on track to commit Monday morning, BTW), and this was
exposed by a few failing tests.
llvm-svn: 230871
Previously it was impossible to distinguish between "There is
no PDB implementation for this platform" and "I tried to load
the PDB, but couldn't find the file", making it hard to figure
out if you built llvm-pdbdump incorrectly or if you just mistyped
a file name.
This patch adds proper error handling so that we can know exactly
what went wrong.
llvm-svn: 230868
Level 1 should abort for all instructions but call/terminators/args.
Instead it was aborting only if the level was > 2
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 230861
When using SetConsoleTextAttribute() to set the foreground or
background color, if you don't explicitly set both colors, then
a default value of black will be chosen for whichever you don't
specify a value for.
This is annoying when you have a non default console background
color, for example, and you try to set the foreground color.
This patch gets the existing fg/bg color and when you set one
attribute, sets the opposite attribute to its existing color
prior to comitting the update.
Reviewed by: Aaron Ballman
Differential Revision: http://reviews.llvm.org/D7967
llvm-svn: 230859
Leaving empty blocks around just opens up a can of bugs like PR22704. Deleting
them early also slightly simplifies code.
Thanks to Sanjay for the IR test case.
llvm-svn: 230856
Patch by Evangelos Foutras:
r220899 started using ocamlfind to build the OCaml bindings but
docs/Makefile still contains references to the OCAMLDOC macro which
is no longer being defined. The result is that OCaml documentation
isn't generated/installed.
llvm-svn: 230850
