This makes it easier to keep the LowerBRCOND and LowerSELECT code in sync with LowerXALUO so they always pick the same operation for overflowing instructions.
This is inspired by the helper functions used by ARM and AArch64 for the same purpose.
The test change is because LowerSELECT was not in sync with LowerXALUO with regard to INC/DEC for SADDO/SSUBO.
llvm-svn: 350198
This was added at a time when i1 was a legal type with avx512f and there was a bug. i1 is no longer considered a legal type with avx512f so there should be no codegen difference.
llvm-svn: 350195
When SADDO/SSUBO is used as a part of a condition, the X86 backend has to lower the instruction twice. One for the flags use and then once for the data use. These two selections should be kept in sync so they end up with one node providing the data and the flags. This doesn't seem to be happening for INC/DEC.
llvm-svn: 350194
default
During the lowering of a switch that would result in the generation of a jump
table, a range check is performed before indexing into the jump table, for the
switch value being outside the jump table range and a conditional branch is
inserted to jump to the default block. In case the default block is
unreachable, this conditional jump can be omitted. This patch implements
omitting this conditional branch for unreachable defaults.
Review Reference: D52002
llvm-svn: 350186
Summary:
For SDAG, we pretend patchpoints aren't special at all until we emit the code for the pseudo.
Then the verifier runs and it seems like we have a use of an undefined register (the register will
be reserved later, but the verifier doesn't know that).
So this patch call setUsesTOCBasePtr before emit the code for the pseudo, so verifier can know
X2 is a reserved register.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D56148
llvm-svn: 350165
This seems to be getting in the way more than its helping. This does mean we stop scalarizing some cases, but I'm not convinced the scalarization was really better.
Some of the changes to vsel-cmp-load.ll are a regression but D56156 should fix it.
llvm-svn: 350159
This allows us to sign extend to v4i32 first. And then share that extension to implement the final steps to v4i64 using a pcmpgt and punpckl and punpckh.
We already do something similar for SIGN_EXTEND with -x86-experimental-vector-widening-legalization.
llvm-svn: 350158
A recent patch has added custom legalization of vector conversions of
v2i16 -> v2f64. This just rounds it out for other types where the input vector
has an illegal (narrower) type than the result vector. Specifically, this will
handle the following conversions:
v2i8 -> v2f64
v4i8 -> v4f32
v4i16 -> v4f32
Differential revision: https://reviews.llvm.org/D54663
llvm-svn: 350155
The current CRBIT spill pseudo-op expansion creates a KILL instruction
that kills the CRBIT and defines the enclosing CR field. However, this
paints a false picture to the register allocator that all bits in the CR
field are killed so copies of other bits out of the field become dead and
removable.
This changes the expansion to preserve the KILL flag on the CRBIT as an
implicit use and to treat the CR field as an undef input.
Thanks to Hal Finkel for the review and Uli Weigand for implementation input.
Differential revision: https://reviews.llvm.org/D55996
llvm-svn: 350153
This was tricking us into making these operations and then letting them get scalarized later. But I can't prove that the scalarized version is actually better.
llvm-svn: 350141
Previously we emitted a multiply and some masking that was supposed to matched to PMULUDQ, but the masking could sometimes be removed before we got a chance to match it. So instead just emit the PMULUDQ directly.
Remove the DAG combine that was added when the ReplaceNodeResults code was originally added. Add a new DAG combine to avoid regressions in shrink_vmul.ll
Some of the shrink_vmul.ll test cases now pick PMULUDQ instead of PMADDWD/PMULLD, but I think this should be an improvement on most CPUs.
I think all of this can go away if/when we switch to -x86-experimental-vector-widening-legalization
llvm-svn: 350134
This is the last one in a series of patches to support better code generation for bitfield insert.
BitPermutationSelector already support ISD::ZERO_EXTEND but not TRUNCATE.
This patch adds support for ISD:TRUNCATE in BitPermutationSelector.
For example of this test case,
struct s64b {
int a:4;
int b:16;
int c:24;
};
void bitfieldinsert64b(struct s64b *p, unsigned char v) {
p->b = v;
}
the selection DAG loos like:
t14: i32,ch = load<(load 4 from %ir.0)> t0, t2, undef:i64
t18: i32 = and t14, Constant:i32<-1048561>
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t22: i64 = AssertZext t4, ValueType:ch:i8
t23: i32 = truncate t22
t16: i32 = shl nuw nsw t23, Constant:i32<4>
t19: i32 = or t18, t16
t20: ch = store<(store 4 into %ir.0)> t14:1, t19, t2, undef:i64
By handling truncate in the BitPermutationSelector, we can use information from AssertZext when selecting t19 and skip the mask operation corresponding to t18.
So the generated sequences with and without this patch are
without this patch
rlwinm 5, 5, 0, 28, 11 # corresponding to t18
rlwimi 5, 4, 4, 20, 27
with this patch
rlwimi 5, 4, 4, 12, 27
Differential Revision: https://reviews.llvm.org/D49076
llvm-svn: 350118
If we are changing the MI operand from Reg to Imm, we need also handle its implicit use if have.
Differential Revision: https://reviews.llvm.org/D56078
llvm-svn: 350115
For atomic value operand which less than 4 bytes need to be masked.
And the related operation to calculate the newvalue can be done in 32 bit gprc.
So just use gprc for mask and value calculation.
Differential Revision: https://reviews.llvm.org/D56077
llvm-svn: 350113
Create PMULDQ/PMULUDQ as long as the number of elements is a power of 2.
This seems to give some improvements in our ability to use SimplifyDemandedBits.
llvm-svn: 350084
The patch adds a possibility to make library calls on NVPTX.
An important thing about library functions - they must be defined within
the current module. This basically should guarantee that we produce a
valid PTX assembly (without calls to not defined functions). The one who
wants to use the libcalls is probably will have to link against
compiler-rt or any other implementation.
Currently, it's completely impossible to make library calls because of
error LLVM ERROR: Cannot select: i32 = ExternalSymbol '...'. But we can
lower ExternalSymbol to TargetExternalSymbol and verify if the function
definition is available.
Also, there was an issue with a DAG during legalisation. When we expand
instruction into libcall, the inner call-chain isn't being "integrated"
into outer chain. Since the last "data-flow" (call retval load) node is
located in call-chain earlier than CALLSEQ_END node, the latter becomes
a leaf and therefore a dead node (and is being removed quite fast).
Proposed here solution relies on another data-flow pseudo nodes
(ProxyReg) which purpose is only to keep CALLSEQ_END at legalisation and
instruction selection phases - we remove the pseudo instructions before
register scheduling phase.
Patch by Denys Zariaiev!
Differential Revision: https://reviews.llvm.org/D34708
llvm-svn: 350069
Add widen scalar for type index 1 (i1 condition) for G_SELECT.
Select G_SELECT for pointer, s32(integer) and smaller low level
types on MIPS32.
Differential Revision: https://reviews.llvm.org/D56001
llvm-svn: 350063
Summary:
This patch is to fix the bug imported by rL341634.
In above submit , the the return type of ISD::ADDE is
14224: SDVTList VTs = DAG.getVTList(MVT::i64, MVT::i64),
but in fact, the second return type of ISD::ADDE should be
MVT::Glue not MVT::i64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55977
llvm-svn: 350061
This is an alternative to what I attempted in D56057.
GetDemandedBits is a special version of SimplifyDemandedBits that allows simplifications even when the operand has other uses. GetDemandedBits will only do simplifications that allow a node to be bypassed. It won't create new nodes or alter any of the other users.
I had to add support for bypassing SIGN_EXTEND_INREG to GetDemandedBits.
Based on a patch that Simon Pilgrim sent me in email.
Fixes PR40142.
llvm-svn: 350059
It's dangerous to knowingly create an illegal vector type
no matter what stage of combining we're in.
This prevents the missed folding/scalarization seen in:
https://bugs.llvm.org/show_bug.cgi?id=40146
llvm-svn: 350034
trunc (add X, C ) --> add (trunc X), C'
If we're throwing away the top bits of an 'add' instruction, do it in the narrow destination type.
This makes the truncate-able opcode list identical to the sibling transform done in IR (in instcombine).
This change used to show regressions for x86, but those are gone after D55494.
This gets us closer to deleting the x86 custom function (combineTruncatedArithmetic)
that does almost the same thing.
Differential Revision: https://reviews.llvm.org/D55866
llvm-svn: 350006
The missed load folding noticed in D55898 is visible independent of that change
either with an adjusted IR pattern to start or with AVX2/AVX512 (where the build
vector becomes a broadcast first; movddup is not produced until we get into isel
via tablegen patterns).
Differential Revision: https://reviews.llvm.org/D55936
llvm-svn: 350005
@bextr64_32_b1 is extracted from hotpath of real-world code
(RawSpeed BitStream<>::peekBitsNoFill()) after `clang -O3`.
@bextr64_32_b2/@bextr64_32_b0 is the same pattern,
but with trunc done last, showing how i think it can be handled:
https://rise4fun.com/Alive/K4Bhttps://rise4fun.com/Alive/qC9
It is possible that middle-end should do some of this, too.
https://bugs.llvm.org/show_bug.cgi?id=36419
llvm-svn: 349998
This fixes the patterns that have or/and as a root. 'and' is handled differently since thy usually have a CMP wrapped around them.
I had to look for uses of the CF flag because all these nodes have non-standard CF flag behavior. A real or/xor would always clear CF. In practice we shouldn't be using the CF flag from these nodes as far as I know.
Differential Revision: https://reviews.llvm.org/D55813
llvm-svn: 349962
The BEXTR instruction documents the SF bit as undefined.
The TBM BEXTR instruction has the same issue, but I'm not sure how to test it. With the control being an immediate we can determine the sign bit is 0 or the BEXTR would have been removed.
Fixes PR40060
Differential Revision: https://reviews.llvm.org/D55807
llvm-svn: 349956
Summary:
Don't peel of the offset if the resulting base could possibly be negative in Indirect addressing.
This is because the M0 field is of unsigned.
This patch achieves the similar goal as https://reviews.llvm.org/D55241, but keeps the optimization
if the base is known unsigned.
Reviewers:
arsemn
Differential Revision:
https://reviews.llvm.org/D55568
llvm-svn: 349951
This is admittedly a narrow fix for the problem:
https://bugs.llvm.org/show_bug.cgi?id=37502
...but as the XOP restriction shows, it's a maze to get this right.
In the motivating example, note that we have movddup before SSE4.1 and
again with AVX2. That's because insertps isn't available pre-SSE41 and
vbroadcast is (more generally) available with AVX2 (and the splat is
reduced to movddup via isel pattern).
Differential Revision: https://reviews.llvm.org/D55898
llvm-svn: 349937
