Summary:
We don't do BypassSlowDivision when the denominator is a constant, but
we do do it when the numerator is a constant.
This patch makes two related changes to BypassSlowDivision when the
numerator is a constant:
* If the numerator is too large to fit into the bypass width, don't
bypass slow division (because we'll never run the smaller-width
code).
* If we bypass slow division where the numerator is a constant, don't
OR together the numerator and denominator when determining whether
both operands fit within the bypass width. We need to check only the
denominator.
Reviewers: tra
Subscribers: llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D26699
llvm-svn: 287062
This patch adds support for instrumenting masked loads and stores under
ASan, if they have a constant mask.
isInterestingMemoryAccess now supports returning a mask to be applied to
the loads, and instrumentMop will use it to generate additional checks.
Added tests for v4i32 v8i32, and v4p0i32 (~v4i64) for both loads and
stores (as well as a test to verify we don't add checks to non-constant
masks).
Differential Revision: https://reviews.llvm.org/D26230
llvm-svn: 287047
In RateRegister of existing LSR, if a formula contains a Reg which is a SCEVAddRecExpr,
and this SCEVAddRecExpr's loop is an outerloop, the formula will be marked as Loser
and dropped.
Suppose we have an IR that %for.body is outerloop and %for.body2 is innerloop. LSR only
handle inner loop now so only %for.body2 will be handled.
Using the logic above, formula like
reg(%array) + reg({1,+, %size}<%for.body>) + 1*reg({0,+,1}<%for.body2>) will be dropped
no matter what because reg({1,+, %size}<%for.body>) is a SCEVAddRecExpr type reg related
with outerloop. Only formula like
reg(%array) + 1*reg({{1,+, %size}<%for.body>,+,1}<nuw><nsw><%for.body2>) will be kept
because the SCEVAddRecExpr related with outerloop is folded into the initial value of the
SCEVAddRecExpr related with current loop.
But in some cases, we do need to share the basic induction variable
reg{0 ,+, 1}<%for.body2> among LSR Uses to reduce the final total number of induction
variables used by LSR, so we don't want to drop the formula like
reg(%array) + reg({1,+, %size}<%for.body>) + 1*reg({0,+,1}<%for.body2>) unconditionally.
From the existing comment, it tries to avoid considering multiple level loops at the same time.
However, existing LSR only handles innermost loop, so for any SCEVAddRecExpr with a loop other
than current loop, it is an invariant and will be simple to handle, and the formula doesn't have
to be dropped.
Differential Revision: https://reviews.llvm.org/D26429
llvm-svn: 286999
When both WidenIV::getWideRecurrence and WidenIV::getExtendedOperandRecurrence
return non-null but different WideAddRec, if getWideRecurrence is called
before getExtendedOperandRecurrence, we won't bother to call
getExtendedOperandRecurrence again. But As we know it is possible that after
SCEV folding, we cannot prove the legality using the SCEVAddRecExpr returned
by getWideRecurrence. Meanwhile if getExtendedOperandRecurrence returns non-null
WideAddRec, we know for sure that it is legal to do widening for current instruction.
So it is better to put getExtendedOperandRecurrence before getWideRecurrence, which
will increase the chance of successful widening.
Differential Revision: https://reviews.llvm.org/D26059
llvm-svn: 286987
The register usage algorithm incorrectly treats instructions whose value is
not used within the loop (e.g. those that do not produce a value).
The algorithm first calculates the usages within the loop. It iterates over
the instructions in order, and records at which instruction index each use
ends (in fact, they're actually recorded against the next index, as this is
when we want to delete them from the open intervals).
The algorithm then iterates over the instructions again, adding each
instruction in turn to a list of open intervals. Instructions are then
removed from the list of open intervals when they occur in the list of uses
ended at the current index.
The problem is, instructions which are not used in the loop are skipped.
However, although they aren't used, the last use of a value may have been
recorded against that instruction index. In this case, the use is not deleted
from the open intervals, which may then bump up the estimated register usage.
This patch fixes the issue by simply moving the "is used" check after the loop
which erases the uses at the current index.
Differential Revision: https://reviews.llvm.org/D26554
llvm-svn: 286969
This adds support for TSan C++ exception handling, where we need to add extra calls to __tsan_func_exit when a function is exitted via exception mechanisms. Otherwise the shadow stack gets corrupted (leaked). This patch moves and enhances the existing implementation of EscapeEnumerator that finds all possible function exit points, and adds extra EH cleanup blocks where needed.
Differential Revision: https://reviews.llvm.org/D26177
llvm-svn: 286893
Summary:
We have always speculatively promoted all renamable local values
(except const non-address taken variables) for both the exporting
and importing module. We would then internalize them back based on
the ThinLink results if they weren't actually exported. This is
inefficient, and results in unnecessary renames. It also meant we
had to check the non-renamability of a value in the summary, which
was already checked during function importing analysis in the ThinLink.
Made renameModuleForThinLTO (which does the promotion/renaming) instead
use the index when exporting, to avoid unnecessary renames/promotions.
For importing modules, we can simply promoted all values as any local
we import by definition is exported and needs promotion.
This required changes to the method used by the FunctionImport pass
(only invoked from 'opt' for testing) and when invoked from llvm-link,
since neither does a ThinLink. We simply conservatively mark all locals
in the index as promoted, which preserves the current aggressive
promotion behavior.
I also needed to change an llvm-lto based test where we had previously
been aggressively promoting values that weren't importable (aliasees),
but now will not promote.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26467
llvm-svn: 286871
Summary:
The change in r285513 to prevent exporting of locals used in
inline asm added all locals in the llvm.used set to the reference
set of functions containing inline asm. Since these locals were marked
NoRename, this automatically prevented importing of the function.
Unfortunately, this caused an explosion in the summary reference lists
in some cases. In my particular example, it happened for a large protocol
buffer generated C++ file, where many of the generated functions
contained an inline asm call. It was exacerbated when doing a ThinLTO
PGO instrumentation build, where the PGO instrumentation included
thousands of private __profd_* values that were added to llvm.used.
We really only need to include a single llvm.used local (NoRename) value
in the reference list of a function containing inline asm to block it
being imported. However, it seems cleaner to add a flag to the summary
that explicitly describes this situation, which is what this patch does.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26402
llvm-svn: 286840
Summary:
Unfolding selects was previously done with the help of a vector
of pointers that was then sorted to be able to remove duplicates.
As this sorting depends on the memory addresses, it was
non-deterministic. A SetVector is used now so that duplicates are
removed without the need of sorting first.
Reviewers: mgrang, efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26450
llvm-svn: 286807
All existing callers were manually extracting information out of an existing
GEP instruction and passing it to getGEPExpr(). Simplify the interface by
changing it to take a GEPOperator instead.
llvm-svn: 286751
This implements a function annotation that disables TSan checking for the
function at run time. The benefit over attribute((no_sanitize("thread")))
is that the accesses within the callees will also be suppressed.
The motivation for this attribute is a guarantee given by the objective C
language that the calls to the reference count decrement and object
deallocation will be synchronized. To model this properly, we would need
to intercept all ref count decrement calls (which are very common in ObjC
due to use of ARC) and also every single message send. Instead, we propose
to just ignore all accesses made from within dealloc at run time. The main
downside is that this still does not introduce any synchronization, which
means we might still report false positives if the code that relies on this
synchronization is not executed from within dealloc. However, we have not seen
this in practice so far and think these cases will be very rare.
Differential Revision: https://reviews.llvm.org/D25858
llvm-svn: 286663
This is PR28376.
Unfortunately given the current structure of optimization diagnostics we
lack the capability to tell whether the user has
passed -Rpass-analysis=loop-vectorize since this is local to the
front-end (BackendConsumer::OptimizationRemarkHandler).
So rather than printing this even if the user has already
passed -Rpass-analysis, this patch just punts and stops recommending
this option. I don't think that getting this right is worth the
complexity.
Differential Revision: https://reviews.llvm.org/D26563
llvm-svn: 286662
This is a follow-up on the recent refactoring of the FunctionMerge pass.
It should fix a fail of the new FunctionComparator unittest whe compiling with MSVC.
llvm-svn: 286648
When a function pointer is replaced with a jumptable pointer, special
case is needed to preserve the semantics of extern_weak functions.
Since a jumptable entry can not be extern_weak, we emulate that
behaviour by replacing all references to F (the extern_weak function)
with the following expression: F != nullptr ? JumpTablePtr : nullptr.
Extra special care is needed for global initializers, since most (or
probably all) backends can not lower an initializer that includes
this kind of constant expression. Initializers like that are replaced
with a global constructor (i.e. a runtime initializer).
llvm-svn: 286636
This is pure refactoring. NFC.
This change moves the FunctionComparator (together with the GlobalNumberState
utility) in to a separate file so that it can be used by other passes.
For example, the SwiftMergeFunctions pass in the Swift compiler:
https://github.com/apple/swift/blob/master/lib/LLVMPasses/LLVMMergeFunctions.cpp
Details of the change:
*) The big part is just moving code out of MergeFunctions.cpp into FunctionComparator.h/cpp
*) Make FunctionComparator member functions protected (instead of private)
so that a derived comparator class can use them.
Following refactoring helps to share code between the base FunctionComparator
class and a derived class:
*) Add a beginCompare() function
*) Move some basic function property comparisons into a separate function compareSignature()
*) Do the GEP comparison inside cmpOperations() which now has a new
needToCmpOperands reference parameter
https://reviews.llvm.org/D25385
llvm-svn: 286632
The current implementation is emitting a global constant that happens
to evaluate to the same bytes + relocation as a jump instruction on
X86. This does not work for PIE executables and shared libraries
though, because we end up with a wrong relocation type. And it has no
chance of working on ARM/AArch64 which use different relocation types
for jump instructions (R_ARM_JUMP24) that is never generated for
data.
This change replaces the constant with module-level inline assembly
followed by a hidden declaration of the jump table. Works fine for
ARM/AArch64, but has some drawbacks.
* Extra symbols are added to the static symbol table, which inflate
the size of the unstripped binary a little. Stripped binaries are not
affected. This happens because jump table declarations must be
external (because their body is in the inline asm).
* Original functions that were anonymous are now named
<original name>.cfi, and it affects symbolization sometimes. This is
necessary because the only user of these functions is the (inline
asm) jump table, so they had to be added to @llvm.used, which does
not allow unnamed functions.
llvm-svn: 286611
Removing the limitation in visitInsertElementInst() causes several regressions
because we're not prepared to fold sequences of shuffles or inserts and extracts
separated by shuffles. Fixing that appears to be a difficult mission because we
are purposely trying to avoid creating shuffles with arbitrary shuffle masks
because some targets may choke on those.
https://llvm.org/bugs/show_bug.cgi?id=30923
llvm-svn: 286423
No testcase included because I can't figure out how to reduce it.
(It's easy to write a testcase where rotation clones an assume,
but that doesn't actually seem to trigger the crash in opt on
its own; maybe an issue with the laziness?)
Differential Revision: https://reviews.llvm.org/D26434
llvm-svn: 286410
Summary:
Unrolled Loop Size calculations moved to a function.
Constant representing number of optimized instructions
when "back edge" becomes "fall through" replaced with
variable.
Some comments added.
Reviewers: mzolotukhin
Differential Revision: http://reviews.llvm.org/D21719
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 286389
Scalar Evolution asserts when not all the operands of an Add Recurrence
Expression are loop invariants. Loop Strength Reduction should only
create affine Add Recurrences, so that both the start and the step of
the expression are loop invariants.
Differential Revision: https://reviews.llvm.org/D26185
llvm-svn: 286347
Summary: For functions with profile data, we are confident that loop sink will be optimal in sinking code.
Reviewers: davidxl, hfinkel
Subscribers: mehdi_amini, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D26155
llvm-svn: 286325
As the test change shows, we can increase the critical path by adding
a 'not' instruction, so make sure that we're actually removing an
instruction if we do this transform.
This transform could also cause us to miss folds of min/max pairs.
llvm-svn: 286315
This addresses PR30746, <https://llvm.org/bugs/show_bug.cgi?id=30746>. The ASan pass iterates over entry-block instructions and checks each alloca whether it's in NonInstrumentedStaticAllocaVec, which is apparently slow. This patch gathers the instructions to move during visitAllocaInst.
Differential Revision: https://reviews.llvm.org/D26380
llvm-svn: 286296
For example, it invalidates the domtree, causing assertions
in later passes which need dominator infos. Make it preserve
GlobalsAA, as suggested by Eli.
Differential Revision: https://reviews.llvm.org/D26381
llvm-svn: 286271
From experiments, discriminator is rarely greater than 127. Here we enforce it to be no greater than 127 so that it will always fit in 1 byte.
llvm-svn: 286245
Summary:
These are good candidates for jump threading. This enables later opts
(such as InstCombine) to combine instructions from the selects with
instructions out of the selects. SimplifyCFG will fold the select
again if unfolding wasn't worth it.
Patch by James Molloy and Pablo Barrio.
Reviewers: rengolin, haicheng, sebpop
Subscribers: jojo, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D26391
llvm-svn: 286236
Summary:
In some specific scenarios with well understood operand bundle types
(like `"deopt"`) it may be possible to go ahead and convert recursion to
iteration, but TailRecursionElimination does not have that logic today
so avoid doing the right thing for now.
I need some input on whether `"funclet"` operand bundles should also
block tail recursion elimination. If not, I'll allow TRE across calls
with `"funclet"` operand bundles and add a test case.
Reviewers: rnk, majnemer, nlewycky, ahatanak
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D26270
llvm-svn: 286147
Although rare, atomic accesses to floating-point types seem to be valid, i.e. `%a = load atomic float ...`. The TSan instrumentation pass however tries to emit inttoptr, which is incorrect, we should use a bitcast here. Anyway, IRBuilder already has a convenient helper function for this.
Differential Revision: https://reviews.llvm.org/D26266
llvm-svn: 286135
Argument evaluation order is one of the edge cases where Clang differs
from GCC, yielding different IR depending on which compiler LLVM was
built with. Make the order deterministic and tune the test to actually
verify the order instead of trying to hide it.
llvm-svn: 286126
This was reverted at r285866 because there was a crash handling a scalar
select of vectors. I added a check for that pattern and a test case based
on the example provided in the post-commit thread for r285732.
llvm-svn: 286113
Summary:
SmallSetVector uses DenseSet, but that means we need to reserve some
values for the empty and tombstone keys.
It seems to me we should have a general way to let us store full-range
ints inside of DenseSets, and furthermore that we probably shouldn't
silently let you add ints into DenseSets without explicitly promising
that they're in range. But that's a battle for another day; for now,
just fix this code, since we currently do something Very Bad when
compiling ffmpeg.
Fixes PR30914.
Reviewers: jeremyhu
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D26323
llvm-svn: 286038
instruction.
This avoids dereferencing null in the debug logging if the instruction
was not in fact a return instruction. This potential bug was found by
PVS-Studio.
This actually fixes the last of the "dereferenced a pointer before
checking it for null" reports in the recent PVS-Studio run. However,
there are quite a few reports of this nature that I did not do anything
to fix because they are pretty glaring false positives. They usually
took the form of quite clear correlated checks or a check made in
a separate function. I've even added asserts anywhere this correlation
wasn't pretty obvious and fundamental to the code.
llvm-svn: 285988
This condition is trivially always true prior to the change. The comment
at the call site makes it clear that we expect *all* of these to be '=',
'S', or 'I' so fix the code.
We have a bug I will update to track the fact that Clang doesn't warn on
this: http://llvm.org/PR13101
llvm-svn: 285930
Summary:
The recent change I made to consult the summary when deciding whether to
rename (to handle inline asm) in r285513 broke the distributed build
case. In a distributed backend we will only have a portion of the
combined index, specifically for imported modules we only have the
summaries for any imported definitions. When renaming on import we were
asserting because no summary entry was found for a local reference being
linked in (def wasn't imported).
We only need to consult the summary for a renaming decision for the
exporting module. For imports, we would have prevented importing any
references to NoRename values already.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26250
llvm-svn: 285871
This reverts commit r285732.
This change introduced a new assertion failure in the following
testcase at -O2:
typedef short __v8hi __attribute__((__vector_size__(16)));
__v8hi foo(__v8hi &V1, __v8hi &V2, unsigned mask) {
__v8hi Result = V1;
if (mask & 0x80)
Result[0] = V2[0];
return Result;
}
llvm-svn: 285866
Summary:
It was detected that the reassociate pass could enter an inifite
loop when analysing dead code. Simply skipping to analyse basic
blocks that are dead avoids such problems (and as a side effect
we avoid spending time on optimising dead code).
The solution is using the same Reverse Post Order ordering of the
basic blocks when doing the optimisations, as when building the
precalculated rank map. A nice side-effect of this solution is
that we now know that we only try to do optimisations for blocks
with ranked instructions.
Fixes https://llvm.org/bugs/show_bug.cgi?id=30818
Reviewers: llvm-commits, davide, eli.friedman, mehdi_amini
Subscribers: dberlin
Differential Revision: https://reviews.llvm.org/D26154
llvm-svn: 285793
This patch introduces the combine:
(C1 shift (A add C2)) -> ((C1 shift C2) shift A)
iff A and C2 are both positive
If both A and C2 are know to be positive then we can safely split into 2 shifts, permitting the folding of the Inner shift.
Fix for the spec benchmark case mentioned by @nadav on PR15141 (assuming we can prove that the inputs as positive).
Differential Revision: https://reviews.llvm.org/D26000
llvm-svn: 285696
On Darwin, simple C null-terminated constant strings normally end up in the __TEXT,__cstring section of the resulting Mach-O binary. When instrumented with ASan, these strings are transformed in a way that they cannot be in __cstring (the linker unifies the content of this section and strips extra NUL bytes, which would break instrumentation), and are put into a generic __const section. This breaks some of the tools that we have: Some tools need to scan all C null-terminated strings in Mach-O binaries, and scanning all the contents of __const has a large performance penalty. This patch instead introduces a special section, __asan_cstring which will now hold the instrumented null-terminated strings.
Differential Revision: https://reviews.llvm.org/D25026
llvm-svn: 285619
possible pointer-wrap-around concerns, in some cases.
Before this patch, collectConstStridedAccesses (part of interleaved-accesses
analysis) called getPtrStride with [Assume=false, ShouldCheckWrap=true] when
examining all candidate pointers. This is too conservative. Instead, this
patch makes collectConstStridedAccesses use an optimistic approach, calling
getPtrStride with [Assume=true, ShouldCheckWrap=false], and then, once the
candidate interleave groups have been formed, revisits the pointer-wrapping
analysis but only where it matters: namely, in groups that have gaps, and where
the gaps are not at the very end of the group (in which case the loop is
peeled). This second time getPtrStride is called with [Assume=false,
ShouldCheckWrap=true], but this could further be improved to using Assume=true,
once we also add the logic to track that we are not going to meet the scev
runtime checks threshold.
Differential Revision: https://reviews.llvm.org/D25276
llvm-svn: 285517
Summary:
Instead of using the workaround of suppressing the entire index for
modules that call inline asm that may reference locals, use the
NoRename flag on the summary for any locals in the llvm.used set, and
add a reference edge from any functions containing inline asm.
This avoids issues from having no summaries despite the module defining
global values, which was preventing more aggressive index-based
optimization. It will be followed by a subsequent patch to make a
similar fix for local references in module level asm (to fix PR30610).
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26121
llvm-svn: 285513
Summary:
Replace the check of whether a GV has a section with the flag check
in the summary. This is in preparation for using the NoPromote flag
to convey other situations when we can't promote (e.g. locals used in
inline asm).
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26063
llvm-svn: 285507
Summary:
This "pass" eagerly creates div and rem instructions even when only one
is needed -- it relies on a later pass (machine DCE?) to clean them up.
This is problematic not just from a cleanliness perspective (this pass
is running during CodeGenPrepare, so should leave the IR in a better
state), but it also creates a problem for instruction selection. If we
always have a div+rem, isel will always select a divrem instruction (if
possible), even when a single div or rem would do.
Specifically, in NVPTX, we want to compute rem from the output of div,
if available. But if a div is not available, we want to leave the rem
alone. This transformation is overeager if div is always available.
Because this code runs as part of CodeGenPrepare, it's nontrivial to
write a test for this change. But this will effectively be tested by
a later patch which adds the aforementioned change to NVPTX isel.
Reviewers: tra
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26088
llvm-svn: 285460
Summary:
In BypassSlowDivision's short-dividend path, we would create e.g.
udiv exact i32 %a, %b
"exact" here means that we are asserting that %a is a multiple of %b.
But we have no reason to believe this must be true -- this is just a
bug, as far as I can tell.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D26097
llvm-svn: 285459
Now LPPassManager will run LCSSA verification only for the top-level loop
which was processed on the current iteration.
Differential Revision: https://reviews.llvm.org/D25873
llvm-svn: 285394
Fixes PR 30784. Discussed with Justin, who pointed out that
in the new PassManager infrastructure we can have more fine-grained
control on which analyses we want to preserve, but this is the
best we can do with the current infrastructure.
llvm-svn: 285380
Summary:
This is in preparation for a change to utilize this flag for symbols
referenced/defined in either inline or module level assembly.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26048
llvm-svn: 285376
Summary: LICM may hoist instructions to preheader speculatively. Before code generation, we need to sink down the hoisted instructions inside to loop if it's beneficial. This pass is a reverse of LICM: looking at instructions in preheader and sinks the instruction to basic blocks inside the loop body if basic block frequency is smaller than the preheader frequency.
Reviewers: hfinkel, davidxl, chandlerc
Subscribers: anna, modocache, mgorny, beanz, reames, dberlin, chandlerc, mcrosier, junbuml, sanjoy, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D22778
llvm-svn: 285308
After successfull horizontal reduction vectorization attempt for PHI node
vectorizer tries to update root binary op by combining vectorized tree
and the ReductionPHI node. But during vectorization this ReductionPHI
can be vectorized itself and replaced by the `undef` value, while the
instruction itself is marked for deletion. This 'marked for deletion'
PHI node then can be used in new binary operation, causing "Use still
stuck around after Def is destroyed" crash upon PHI node deletion.
Also the test is fixed to make it perform actual testing.
Differential Revision: https://reviews.llvm.org/D25671
llvm-svn: 285286
Summary: This patch introduces updateDiscriminator to DILocation so that it can be directly called by AddDiscriminator. It also makes it easier to update the discriminator later.
Reviewers: dnovillo, dblaikie, aprantl, echristo
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25959
llvm-svn: 285207
When the loop exit condition is canonicalized as a != compaison, reuse the
debug location of the original (non canonical) comparison.
Before this patch, the debug location of the new icmp was obtained from the
loop latch terminator. This patch fixes the issue by correctly setting the
IRBuilder's "current debug location" to the location of the original compare.
Differential Revision: https://reviews.llvm.org/D25953
llvm-svn: 285185
Summary:
Select instruction annotation in IR PGO uses the edge count to infer the
branch count. It's currently placed in setInstrumentedCounts() where
no all the BB counts have been computed. This leads to wrong branch weights.
Move the annotation after all BB counts are populated.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25961
llvm-svn: 285128
The original patch of the A->B->A BitCast optimization was reverted by r274094 because it may cause infinite loop inside compiler https://llvm.org/bugs/show_bug.cgi?id=27996.
The problem is with following code
xB = load (type B);
xA = load (type A);
+yA = (A)xB; B -> A
+zAn = PHI[yA, xA]; PHI
+zBn = (B)zAn; // A -> B
store zAn;
store zBn;
optimizeBitCastFromPhi generates
+zBn = (B)zAn; // A -> B
and expects it will be combined with the following store instruction to another
store zAn
Unfortunately before combineStoreToValueType is called on the store instruction, optimizeBitCastFromPhi is called on the new BitCast again, and this pattern repeats indefinitely.
optimizeBitCastFromPhi only generates BitCast for load/store instructions, only the BitCast before store can cause the reexecution of optimizeBitCastFromPhi, and BitCast before store can easily be handled by InstCombineLoadStoreAlloca.cpp. So the solution to the problem is if all users of a CI are store instructions, we should not do optimizeBitCastFromPhi on it. Then optimizeBitCastFromPhi will not be called on the new BitCast instructions.
Differential Revision: https://reviews.llvm.org/D23896
llvm-svn: 285116
When we predicate an instruction (div, rem, store) we place the instruction in
its own basic block within the vectorized loop. If a predicated instruction has
scalar operands, it's possible to recursively sink these scalar expressions
into the predicated block so that they might avoid execution. This patch sinks
as much scalar computation as possible into predicated blocks. We previously
were able to sink such operands only if they were extractelement instructions.
Differential Revision: https://reviews.llvm.org/D25632
llvm-svn: 285097
This adds a new function to DebugInfo.cpp that takes an llvm::Module
as input and removes all debug info metadata that is not directly
needed for line tables, thus effectively stripping all type and
variable information from the module.
The primary motivation for this feature was the bitcode work flow
(cf. http://lists.llvm.org/pipermail/llvm-dev/2016-June/100643.html
for more background). This is not wired up yet, but will be in
subsequent patches. For testing, the new functionality is exposed to
opt with a -strip-nonlinetable-debuginfo option.
The secondary use-case (and one that works right now!) is as a
reduction pass in bugpoint. I added two new bugpoint options
(-disable-strip-debuginfo and -disable-strip-debug-types) to control
the new features. By default it will first attempt to remove all debug
information, then only the type info, and then proceed to hack at any
remaining MDNodes.
Thanks to Adrian Prantl for stewarding this patch!
llvm-svn: 285094
When indvars widened an induction variable, the debug location for the loop
increment computation was incorrectly set equal to the debug loc of the loop
latch terminator.
This patch fixes the issue by propagating the correct location from the
original loop increment instruction to the new widened increment.
Differential Revision: https://reviews.llvm.org/D25872
llvm-svn: 285083
Now that MemorySSA keeps track of whether MemoryUses are optimized, use
getClobberingMemoryAccess() to check MemoryUse memory dependencies since
it should no longer be so expensive.
This is a follow-up change to https://reviews.llvm.org/D25881
llvm-svn: 285080
This fixes a bug in the handling of lexical scopes, when more than one
scope is defined on the same line or functions are inlined into call
sites that are on the same line as the function definition. This
situation can easily happen in macro expansions.
The problem is solved by introducing a SmallDenseMap<DIScope *,
DILexicalBlockFile *, 1> that keeps track of all the different lexical
scopes that share a line/file location.
Fixes PR30681.
llvm-svn: 284998
Summary:
When using MemorySSA, re-optimize MemoryPhis when removing a store since
this may create MemoryPhis with all identical arguments.
Also, when using MemorySSA to check if two MemoryUses are reading from
the same version of the heap, use the defining access instead of calling
getClobberingAccess, since the latter can currently result in many more
AA calls. Once the MemorySSA use optimization tracking changes are
done, we can remove this limitation, which should result in more loads
being CSE'd.
Reviewers: dberlin
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D25881
llvm-svn: 284984
Summary:
These are good candidates for jump threading. This enables later opts
(such as InstCombine) to combine instructions from the selects with
instructions out of the selects. SimplifyCFG will fold the select
again if unfolding wasn't worth it.
Patch by James Molloy and Pablo Barrio.
Reviewers: reames, bkramer, mcrosier, gberry, haicheng, jmolloy, sebpop
Subscribers: jojo, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D25477
llvm-svn: 284971
Summary:
Utility pass to remove gc.relocates created by rewrite statepoints for GC.
With respect to safepoint verification, the IR generated would be incorrect, and cannot run
as such.
This would be a single transformation on the final optimized IR.
The benefit of the pass is for easy analysis when the IRs are 'polluted' by too
many gc.relocates.
Added tests.
test run: All RS4GC tests with -verify option. Local downstream tests on large
IR files. This also works when the pointer being gc.relocated is another
gc.relocate.
Reviewers: sanjoy, reames
Subscribers: beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D25096
llvm-svn: 284855
When we have a loop with a known upper bound on the number of iterations, and
furthermore know that either the number of iterations will be either exactly
that upper bound or zero, then we can fully unroll up to that upper bound
keeping only the first loop test to check for the zero iteration case.
Most of the work here is in plumbing this 'max-or-zero' information from the
part of scalar evolution where it's detected through to loop unrolling. I've
also gone for the safe default of 'false' everywhere but howManyLessThans which
could probably be improved.
Differential Revision: https://reviews.llvm.org/D25682
llvm-svn: 284818
There's no agreement about this patch. I personally find the
PRE machinery of the current GVN hard enough to reason about
that I'm not sure I'll try to land this again, instead of working
on the rewrite).
llvm-svn: 284796
Summary:
This allows us to mark when uses have been optimized.
This lets us avoid rewalking (IE when people call getClobberingAccess on everything), and also
enables us to later relax the requirement of use optimization during updates with less cost.
Reviewers: george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25172
llvm-svn: 284771
All of these existed because MSVC 2013 was unable to synthesize default
move ctors. We recently dropped support for it so all that error-prone
boilerplate can go.
No functionality change intended.
llvm-svn: 284721
Some instructions from the original loop, when vectorized, can become trivially
dead. This happens because of the way we structure the new loop. For example,
we create new induction variables and induction variable "steps" in the new
loop. Thus, when we go to vectorize the original induction variable update, it
may no longer be needed due to the instructions we've already created. This
patch prevents us from creating these redundant instructions. This reduces code
size before simplification and allows greater flexibility in code generation
since we have fewer unnecessary instruction uses.
Differential Revision: https://reviews.llvm.org/D25631
llvm-svn: 284631
This change is motivated by the case when IndVarSimplify doesn't widen a comparison of IV increment because it can't prove IV increment being non-negative. We end up with a redundant trunc of the widened increment on this example.
for.body:
%i = phi i32 [ %start, %for.body.lr.ph ], [ %i.inc, %for.inc ]
%within_limits = icmp ult i32 %i, 64
br i1 %within_limits, label %continue, label %for.end
continue:
%i.i64 = zext i32 %i to i64
%arrayidx = getelementptr inbounds i32, i32* %base, i64 %i.i64
%val = load i32, i32* %arrayidx, align 4
br label %for.inc
for.inc:
%i.inc = add nsw nuw i32 %i, 1
%cmp = icmp slt i32 %i.inc, %limit
br i1 %cmp, label %for.body, label %for.end
There is a range check inside of the loop which guarantees the IV to be non-negative. NSW on the increment guarantees that the increment is also non-negative. Teach IndVarSimplify to use the range check to prove non-negativity of loop increments.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D25738
llvm-svn: 284629
Summary:
This pass shrink-wraps a condition to some library calls where the call
result is not used. For example:
sqrt(val);
is transformed to
if (val < 0)
sqrt(val);
Even if the result of library call is not being used, the compiler cannot
safely delete the call because the function can set errno on error
conditions.
Note in many functions, the error condition solely depends on the incoming
parameter. In this optimization, we can generate the condition can lead to
the errno to shrink-wrap the call. Since the chances of hitting the error
condition is low, the runtime call is effectively eliminated.
These partially dead calls are usually results of C++ abstraction penalty
exposed by inlining. This optimization hits 108 times in 19 C/C++ programs
in SPEC2006.
Reviewers: hfinkel, mehdi_amini, davidxl
Subscribers: modocache, mgorny, mehdi_amini, xur, llvm-commits, beanz
Differential Revision: https://reviews.llvm.org/D24414
llvm-svn: 284542
Summary: Debug info should *not* affect code generation. This patch properly handles debug info to make sure the generated code are the same with or without debug info.
Reviewers: davidxl, mzolotukhin, jmolloy
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D25286
llvm-svn: 284415
Not all ConstantExprs can be represented by a global variable, for example most
pointer arithmetic other than addition of a constant, so we can't convert these
values from switch statements to lookup tables.
Differential Revision: https://reviews.llvm.org/D25550
llvm-svn: 284379
In theory this could be generalized to move anything where
we prove the operands are available, but that would require
rewriting PRE. As NewGVN will hopefully come soon, and we're
trying to rewrite PRE in terms of NewGVN+MemorySSA, it's probably
not worth spending too much time on it. Fix provided by
Daniel Berlin!
llvm-svn: 284311
BasicBlock::size is O(insts), making this loop O(blocks*insts), which
can be really slow on generated code. getPrevNode already checks if
we're at the beginning of the block and returns nullptr if so, just use
that instead. No functionality change intended.
llvm-svn: 284303
- Removed unused class members.
- Made class internal data private.
- Made class scoped data function scoped where it's possible.
- Replace naked new/delete with unique_ptr.
- Made resources guaranteed to be freed.
Differential Revision: https://reviews.llvm.org/D25464
llvm-svn: 284290
Prefer add/zext because they are better supported in terms of value-tracking.
Note that the backend should be prepared for this IR canonicalization
(including vector types) after:
https://reviews.llvm.org/rL284015
Differential Revision: https://reviews.llvm.org/D25135
llvm-svn: 284241
This patch modifies the cost calculation of predicated instructions (div and
rem) to avoid the accumulation of rounding errors due to multiple truncating
integer divisions. The calculation for predicated stores will be addressed in a
follow-on patch since we currently don't scale the cost of predicated stores by
block probability.
Differential Revision: https://reviews.llvm.org/D25333
llvm-svn: 284123
This is with an extra change to avoid calling MemoryLocation::get() on a call instruction.
Differential Revision: https://reviews.llvm.org/D25542
llvm-svn: 284098
This CL didn't actually address the test case in PR30499, and clang
still crashes.
Also revert dependent change "Memory-SSA cleanup of clobbers interface, NFC"
Reverts r283965 and r283967.
llvm-svn: 284093
Reappy r284044 after revert in r284051. Krzysztof fixed the error in r284049.
The original summary:
This patch tries to fully unroll loops having break statement like this
for (int i = 0; i < 8; i++) {
if (a[i] == value) {
found = true;
break;
}
}
GCC can fully unroll such loops, but currently LLVM cannot because LLVM only
supports loops having exact constant trip counts.
The upper bound of the trip count can be obtained from calling
ScalarEvolution::getMaxBackedgeTakenCount(). Part of the patch is the
refactoring work in SCEV to prevent duplicating code.
The feature of using the upper bound is enabled under the same circumstance
when runtime unrolling is enabled since both are used to unroll loops without
knowing the exact constant trip count.
llvm-svn: 284053
This patch tries to fully unroll loops having break statement like this
for (int i = 0; i < 8; i++) {
if (a[i] == value) {
found = true;
break;
}
}
GCC can fully unroll such loops, but currently LLVM cannot because LLVM only
supports loops having exact constant trip counts.
The upper bound of the trip count can be obtained from calling
ScalarEvolution::getMaxBackedgeTakenCount(). Part of the patch is the
refactoring work in SCEV to prevent duplicating code.
The feature of using the upper bound is enabled under the same circumstance
when runtime unrolling is enabled since both are used to unroll loops without
knowing the exact constant trip count.
Differential Revision: https://reviews.llvm.org/D24790
llvm-svn: 284044
Summary:
Constant bundle operands may need to retain their constant-ness for
correctness. I'll admit that this is slightly odd, but it looks like
SimplifyCFG already does this for things like @llvm.frameaddress and
@llvm.stackmap, so I suppose adding one more case is not a big deal.
It is possible to add a mechanism to denote bundle operands that need to
remain constants, but that's probably too complicated for the time
being.
Reviewers: jmolloy
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D25502
llvm-svn: 284028
An arithmetic shift can be safely changed to a logical shift if the first
operand is known positive. This allows ComputeKnownBits (and similar analysis)
to determine the sign bit of the shifted value in some cases. In turn, this
allows InstCombine to canonicalize a signed comparison (a > 0) into an equality
check (a != 0).
PR30577
Differential Revision: https://reviews.llvm.org/D25119
llvm-svn: 284013
As discussed by Andrea on PR30486, we have an unsafe cast to an Instruction type in the select combine which doesn't take into account that it could be a ConstantExpr instead.
Differential Revision: https://reviews.llvm.org/D25466
llvm-svn: 284000
This implements the cleanup that Danny asked to commit separately from the
previous fix to GVN-hoist in https://reviews.llvm.org/D25476#inline-219818
Tested with ninja check on x86_64-linux.
llvm-svn: 283967
This is a refreshed version of a patch that was reverted: it fixes
the problems reported in both PR30216 and PR30499, and
contains all the test-cases from both bugs.
To hoist stores past loads, we used to search for potential
conflicting loads on the hoisting path by following a MemorySSA
def-def link from the store to be hoisted to the previous
defining memory access, and from there we followed the def-use
chains to all the uses that occur on the hoisting path. The
problem is that the def-def link may point to a store that does
not alias with the store to be hoisted, and so the loads that are
walked may not alias with the store to be hoisted, and even as in
the testcase of PR30216, the loads that may alias with the store
to be hoisted are not visited.
The current patch visits all loads on the path from the store to
be hoisted to the hoisting position and uses the alias analysis
to ask whether the store may alias the load. I was not able to
use the MemorySSA functionality to ask for whether load and
store are clobbered: I'm not sure which function to call, so I
used a call to AA->isNoAlias().
Store past store is still working as before using a MemorySSA
query: I added an extra test to pr30216.ll to make sure store
past store does not regress.
Tested on x86_64-linux with check and a test-suite run.
Differential Revision: https://reviews.llvm.org/D25476
llvm-svn: 283965
For each block check that it doesn't have any uses outside of it's innermost loop.
Differential Revision: https://reviews.llvm.org/D25364
llvm-svn: 283877
When combining an integer load with !range metadata that does not include 0 to a pointer load, make sure emit !nonnull metadata on the newly-created pointer load. This prevents the !nonnull metadata from being dropped during a ptrtoint/inttoptr pair.
This fixes PR30597.
Patch by Ariel Ben-Yehuda!
Differential Revision: https://reviews.llvm.org/D25215
llvm-svn: 283836
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
Summary:
If heap allocation of a coroutine is elided, we need to make sure that we will update an address stored in the coroutine frame from f.destroy to f.cleanup.
Before this change, CoroSplit synthesized these stores after coro.begin:
```
store void (%f.Frame*)* @f.resume, void (%f.Frame*)** %resume.addr
store void (%f.Frame*)* @f.destroy, void (%f.Frame*)** %destroy.addr
```
In those cases where we did heap elision, but were not able to devirtualize all indirect calls, destroy call will attempt to "free" the coroutine frame stored on the stack. Oops.
Now we use select to put an appropriate coroutine subfunction in the destroy slot. As bellow:
```
store void (%f.Frame*)* @f.resume, void (%f.Frame*)** %resume.addr
%0 = select i1 %need.alloc, void (%f.Frame*)* @f.destroy, void (%f.Frame*)* @f.cleanup
store void (%f.Frame*)* %0, void (%f.Frame*)** %destroy.addr
```
Reviewers: majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25377
llvm-svn: 283625
If we're going to canonicalize IR towards select of constants, try harder to create those.
Also, don't lose the metadata.
This is actually 4 related transforms in one patch:
// select X, (sext X), C --> select X, -1, C
// select X, (zext X), C --> select X, 1, C
// select X, C, (sext X) --> select X, C, 0
// select X, C, (zext X) --> select X, C, 0
Differential Revision: https://reviews.llvm.org/D25126
llvm-svn: 283575
Summary: -fsample-profile needs discriminator, which will not be added if built with -g0. This patch makes sure the discriminator is added for sample-profile at -g0. A followup patch will be send out to update clang tests.
Reviewers: davidxl, dblaikie, echristo, dnovillo
Subscribers: mehdi_amini, probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D25132
llvm-svn: 283565
Previously, we marked the branch conditions of latch blocks uniform after
vectorization if they were instructions contained in the loop. However, if a
condition instruction has users other than the branch, it may not remain
uniform. This patch ensures the conditions we mark uniform are only used by the
branch. This should fix PR30627.
Reference: https://llvm.org/bugs/show_bug.cgi?id=30627
llvm-svn: 283563
unrolling.
The next code is not vectorized by the SLPVectorizer:
```
int test(unsigned int *p) {
int sum = 0;
for (int i = 0; i < 8; i++)
sum += p[i];
return sum;
}
```
During optimization this loop is fully unrolled and SLPVectorizer is
unable to vectorize it. Patch tries to fix this problem.
Differential Revision: https://reviews.llvm.org/D24796
llvm-svn: 283535
With the ROPI and RWPI relocation models we can't always have pointers
to global data or functions in constant data, so don't try to convert switches
into lookup tables if any value in the lookup table would require a relocation.
We can still safely emit lookup tables of other values, such as simple
constants.
Differential Revision: https://reviews.llvm.org/D24462
llvm-svn: 283530
GetCaseResults assumed that a terminator with one successor was an
unconditional branch. This is not necessarily the case, it could be a
cleanupret.
Strengthen the check by querying whether or not the terminator is
exceptional.
llvm-svn: 283517
Add a weak alias to the renamed Comdat function in IR level instrumentation,
using it's original name. This ensures the same behavior w/ and w/o IR
instrumentation, even for non standard conforming code.
Differential Revision: http://reviews.llvm.org/D25339
llvm-svn: 283490
This adds a new function to DebugInfo.cpp that takes an llvm::Module
as input and removes all debug info metadata that is not directly
needed for line tables, thus effectively stripping all type and
variable information from the module.
The primary motivation for this feature was the bitcode work flow
(cf. http://lists.llvm.org/pipermail/llvm-dev/2016-June/100643.html
for more background). This is not wired up yet, but will be in
subsequent patches. For testing, the new functionality is exposed to
opt with a -strip-nonlinetable-debuginfo option.
The secondary use-case (and one that works right now!) is as a
reduction pass in bugpoint. I added two new bugpoint options
(-disable-strip-debuginfo and -disable-strip-debug-types) to control
the new features. By default it will first attempt to remove all debug
information, then only the type info, and then proceed to hack at any
remaining MDNodes.
llvm-svn: 283473
Summary: This makes a change to the state used to maintain visited information for depth first iterator. We know assume a method "completed(...)" which is called after all children of a node have been visited. In all existing cases, this method does nothing so this patch has no functional changes. It will however allow a client to distinguish back from cross edges in a DFS tree.
Reviewers: nadav, mehdi_amini, dberlin
Subscribers: MatzeB, mzolotukhin, twoh, freik, llvm-commits
Differential Revision: https://reviews.llvm.org/D25191
llvm-svn: 283391
The vectorizer already holds a pointer to one cost model artifact in a member
variable (i.e., MinBWs). As we add more, it will be easier to communicate these
artifacts to the vectorizer if we simply pass a pointer to the cost model
instead.
llvm-svn: 283373
The vectorizer already holds a pointer to the legality analysis in a member
variable, so it makes sense that we would pass it in the constructor.
llvm-svn: 283368
This patch refactors the cost estimation of scalarized loads and stores to
reuse getScalarizationOverhead for the cost of the extractelement and
insertelement instructions we might create. The existing code accounted for
this cost, but it was functionally equivalent to the helper function.
llvm-svn: 283364
The cost model has to estimate the probability of executing predicated blocks.
However, we currently always assume predicated blocks have a 50% chance of
executing (this value is hardcoded in several places throughout the code).
Since we always use the same value, this patch adds a helper function for
getting this uniform probability. The function simplifies some comments and
makes our assumptions more clear. In the future, we may want to extend this
with actual block probability information if it's available.
llvm-svn: 283354
This patch adds a single helper function for checking if an instruction will be
scalarized with predication. Such instructions include conditional stores and
instructions that may divide by zero. Existing checks have been updated to use
the new function.
llvm-svn: 283350
Summary: LoopSink pass uses some common function in LICM. This patch refactor the LICM code to make it usable by LoopSink pass (https://reviews.llvm.org/D22778).
Reviewers: davidxl, danielcdh, hfinkel, chandlerc
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D24168
llvm-svn: 283134
Splitting the edge is nontrivial because of the landing pad, and we would
currently assert trying to do it.
Differential Revision: https://reviews.llvm.org/D24680
llvm-svn: 283129
Summary: Added 6 new target hooks for the vectorizer in order to filter types, handle size constraints and decide how to split chains.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, mzolotukhin, wdng, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D24727
llvm-svn: 283099
The binder is in a specific section that "reverse" the edges in a
regular dead-stripping: the binder is live as long as a global it
references is live.
This is a big hammer that prevents LLVM from dead-stripping these,
while still allowing linker dead-stripping (with special knowledge
of the section).
Differential Revision: https://reviews.llvm.org/D24673
llvm-svn: 282988
Summary:
In the case below, %Result.i19 is defined between coro.save and coro.suspend and used after coro.suspend. We need to correctly place such a value into the coroutine frame.
```
%save = call token @llvm.coro.save(i8* null)
%Result.i19 = getelementptr inbounds %"struct.lean_future<int>::Awaiter", %"struct.lean_future<int>::Awaiter"* %ref.tmp7, i64 0, i32 0
%suspend = call i8 @llvm.coro.suspend(token %save, i1 false)
switch i8 %suspend, label %exit [
i8 0, label %await.ready
i8 1, label %exit
]
await.ready:
%val = load i32, i32* %Result.i19
```
Reviewers: majnemer
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24418
llvm-svn: 282902
Summary:
Without the fix, if there was a function inlined into the coroutine with debug information, CloneFunctionInto(NewF, &F, VMap, /*ModuleLevelChanges=*/true, Returns); would duplicate all of the debug information including the DICompileUnit.
We know use VMap to indicate that debug metadata for a File, Unit and FunctionType should not be duplicated when we creating clones that will become f.resume, f.destroy and f.cleanup.
Reviewers: majnemer
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24417
llvm-svn: 282899
Summary: Not all coro.subfn.addr intrinsics can be eliminated in CoroElide through devirtualization. Those that remain need to be lowered in CoroCleanup.
Reviewers: majnemer
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24412
llvm-svn: 282897
