To reduce the size of -gmlt data, skip the subprograms without any
inlined subroutines. Since we've now got the ability to make these
determinations in the backend (funnily enough - we added the flag so we
wouldn't produce ranges under -gmlt, but with this change we use the
flag, but go back to producing ranges under -gmlt).
Instead, just produce CU ranges to inform the consumer which parts of
the code are described by this CU's line table. Tools could inspect the
line table directly to compute the range, but the CU ranges only seem to
be about 0.5% of object/executable size, so I'm not too worried about
teaching llvm-symbolizer that trick just yet - it's certainly a possible
piece of future work.
Update an llvm-symbolizer test just to demonstrate that this schema is
acceptable there (if it wasn't, the compiler-rt tests would catch this,
but good to have an in-llvm-tree test for llvm-symbolizer's behavior
here)
Building the clang binary with -gmlt with this patch reduces the total
size of object files by 5.1% (5.56% without ranges) without compression
and the executable by 4.37% (4.75% without ranges).
llvm-svn: 218129
Summary:
This will allow to request the creation of a forward delacred variable
at is point of use (for imported declarations, this will be
DwarfDebug::constructImportedEntityDIE) rather than having to put the
forward decl in a retention list.
Note that getOrCreateGlobalVariable returns the actual definition DIE when the
routine creates a declaration and a definition DIE. If you agree this is the
right behavior, then I'll have a followup patch that registers the definition
in the DIE map instead of the declaration as it is today (this 'breaks' only
one test, where we test that the imported entity is the declaration). I'm
not sure what's best here, but it's easy enough for a consumer to follow the
DW_AT_specification link to get to the declaration, whereas it takes more
work to find the actual definition from a declaration DIE.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5381
llvm-svn: 218126
The heuristic used by DAGCombine to form FMAs checks that the FMUL has only one
use, but this is overly-conservative on some systems. Specifically, if the FMA
and the FADD have the same latency (and the FMA does not compete for resources
with the FMUL any more than the FADD does), there is no need for the
restriction, and furthermore, forming the FMA leaving the FMUL can still allow
for higher overall throughput and decreased critical-path length.
Here we add a new TLI callback, enableAggressiveFMAFusion, false by default, to
elide the hasOneUse check. This is enabled for PowerPC by default, as most
PowerPC systems will benefit.
Patch by Olivier Sallenave, thanks!
llvm-svn: 218120
With this optimization, we will not always insert zext for values crossing
basic blocks, but insert sext if the users of a value crossing basic block
has preference of sign predicate.
llvm-svn: 218101
This omission will be done in a fancier manner once we're dealing with
"put gmlt in the skeleton CUs under fission" - it'll have to be
conditional on the kind of CU we're emitting into (skeleton or gmlt).
llvm-svn: 218098
The patch moved some logic around in an attempt to generate potentially more
DW_AT_declaration attributes. The patch was flawed though and it stopped
generating the attribute in some cases.
llvm-svn: 218060
Summary:
This doesn't show up today as we don't emit decalration only variables. This
will be tested when the followup patches implementing import of forward
declared entities lands in clang.
Reviewers: echristo, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5382
llvm-svn: 218041
shim between the TargetTransformInfo immutable pass and the Subtarget
via the TargetMachine and Function. Migrate a single call from
BasicTargetTransformInfo as an example and provide shims where TargetMachine
begins taking a Function to determine the subtarget.
No functional change.
llvm-svn: 218004
This required a new hook called hasLoadLinkedStoreConditional to know whether
to expand atomics to LL/SC (ARM, AArch64, in a future patch Power) or to
CmpXchg (X86).
Apart from that, the new code in AtomicExpandPass is mostly moved from
X86AtomicExpandPass. The main result of this patch is to get rid of that
pass, which had lots of code duplicated with AtomicExpandPass.
llvm-svn: 217928
The default implementation of getCmpSelInstrCost, which provides the cost of
icmp/fcmp/select instructions, did not deal sensibly with illegal vector types
that were scalarized. We'd ask for the legalization cost of the vector type,
which would return something like (4, f64) given an input of <4 x double>, and
we'd then check the TLI status of the ISD opcode on that scalar type. This would
result in querying (ISD::VSELECT, f64), for example. Amusingly enough,
ISD::VSELECT on scalar types is marked as Legal by default (as with most other
operations), and most backends never change this because VSELECT is never
generated on scalars. However, seeing the resulting operation as Legal, we'd
neglect to add the scalarization cost before returning. The result is that we'd
grossly under-estimate the cost of cmps/selects on illegal vector types.
Now, if type legalization clearly results in scalarization, we skip the early
return and add the scalarization cost.
llvm-svn: 217859
On MachO, and MachO only, we cannot have a truly empty function since that
breaks the linker logic for atomizing the section.
When we are emitting a frame pointer, the presence of an unreachable will
create a cfi instruction pointing past the last instruction. This is perfectly
fine. The FDE information encodes the pc range it applies to. If some tool
cannot handle this, we should explicitly say which bug we are working around
and only work around it when it is actually relevant (not for ELF for example).
Given the unreachable we could omit the .cfi_def_cfa_register, but then
again, we could also omit the entire function prologue if we wanted to.
llvm-svn: 217801
introduced in r217629.
We were returning the old sext instead of the new zext as the promoted instruction!
Thanks Joerg Sonnenberger for the test case.
llvm-svn: 217800
pointer to a dead function. To make sure it's valid, doFinalization nullptrs
RewindFunction just like the constructor and so it will be found on next run.
llvm-svn: 217737
enabled. A good chunk of the MIsNeedChainEdge() is logic that is valid and should be applied even for targets
that are not using for alias analysis.
llvm-svn: 217706
And since it /looked/ like the DwarfStrSectionSym was unused, I tried
removing it - but then it turned out that DwarfStringPool was
reconstructing the same label (and expecting it to have already been
emitted) and uses that.
So I kept it around, but wanted to pass it in to users - since it seemed
a bit silly for DwarfStringPool to have it passed in and returned but
itself have no use for it. The only two users don't handle strings in
both .dwo and .o files so they only ever need the one symbol - no need
to keep it (and have an unused symbol) in the DwarfStringPool used for
fission/.dwo.
Refactor a bunch of accelerator table usage to remove duplication so I
didn't have to touch 4-5 callers.
llvm-svn: 217628
Do
(shl (add x, c1), c2) -> (add (shl x, c2), c1 << c2)
This is already done for multiplies, but since multiplies
by powers of two are turned into shifts, we also need
to handle it here.
This might want checks for isLegalAddImmediate to avoid
transforming an add of a legal immediate with one that isn't.
llvm-svn: 217610
This is an extension of the change made with r215820:
http://llvm.org/viewvc/llvm-project?view=revision&revision=215820
That patch allowed combining of splatted vector FP constants that are multiplied.
This patch allows combining non-uniform vector FP constants too by relaxing the
check on the type of vector. Also, canonicalize a vector fmul in the
same way that we already do for scalars - if only one operand of the fmul is a
constant, make it operand 1. Otherwise, we miss potential folds.
This fold is also done by -instcombine, but it's possible that extra
fmuls may have been generated during lowering.
Differential Revision: http://reviews.llvm.org/D5254
llvm-svn: 217599
"Unroll" is not the appropriate name for this variable. Clang already uses
the term "interleave" in pragmas and metadata for this.
Differential Revision: http://reviews.llvm.org/D5066
llvm-svn: 217528
So that the two operations in DwarfDebug couldn't get separated (because
I accidentally separated them in some work in progress), put them
together. While we're here, move DwarfUnit::addRange to
DwarfCompileUnit, since it's not relevant to type units.
llvm-svn: 217468
PrevSection/PrevCU are used to detect holes in the address range of a CU
to ensure the DW_AT_ranges does not include those holes. When we see a
function with no debug info, though it may be in the same range as the
prior and subsequent functions, there should be a gap in the CU's
ranges. By setting PrevCU to null in that case, the range would not be
extended to cover the gap.
llvm-svn: 217466
This solves the problem of having a kill flag inside a loop
with a definition of the register prior to the loop:
%vreg368<def> ...
Inside loop:
%vreg520<def> = COPY %vreg368
%vreg568<def,tied1> = add %vreg341<tied0>, %vreg520<kill>
=> was coalesced into =>
%vreg568<def,tied1> = add %vreg341<tied0>, %vreg368<kill>
MachineVerifier then complained:
*** Bad machine code: Virtual register killed in block, but needed live out. ***
The kill flag for %vreg368 is incorrect, and is cleared by this patch.
This is similar to the clearing done at the end of
MachineSinking::SinkInstruction().
Patch provided by Jonas Paulsson.
Reviewed by Quentin Colombet and Juergen Ributzka.
llvm-svn: 217427
Previously, fast-isel would not clean up after failing to select a call
instruction, because it would have called flushLocalValueMap() which moves
the insertion point, making SavedInsertPt in selectInstruction() invalid.
Fixing this by making SavedInsertPt a member variable, and having
flushLocalValueMap() update it.
This removes some redundant code at -O0, and more importantly fixes PR20863.
Differential Revision: http://reviews.llvm.org/D5249
llvm-svn: 217401
It's probably not a huge deal to not do this - if we could, maybe the
address could be reused by a subprogram low_pc and avoid an extra
relocation, but it's just one per CU at best.
llvm-svn: 217338
This problem is bigger than just fsub, but this is the minimum fix to solve
fneg for PR20556 ( http://llvm.org/bugs/show_bug.cgi?id=20556 ), and we solve
zero subtraction with the same change.
llvm-svn: 217286
This reverts commit r217211.
Both the bfd ld and gold outputs were valid. They were using a Rela relocation,
so the value present in the relocated location was not used, which caused me
to misread the output.
llvm-svn: 217264
Fixes PR20523.
When spilling variables onto the stack, spillVirtReg() is setting the
parent pointer of the cloned DBG_VALUE intrinsic for the stack location
to the parent pointer of the original intrinsic. MachineInstr parent
pointers should however always point to the parent basic block.
MBB is shadowing the MBB member variable. The instruction still ends up
being inserted into the right basic block, because it's inserted after MI
which serves as the iterator.
I failed at constructing a reliable testcase for this, see
http://llvm.org/bugs/show_bug.cgi?id=20523 for a large testcases.
llvm-svn: 217260
