Fixing an issue where samples collected for an untrackable frame is not reported. An untrackable frame refers to a frame whose caller is untrackable due to missing debug info or pseudo probe. Though the frame is connected to its parent frame through the frame pointer chain at runtime, the compiler cannot build the connection without debug info or pseudo probe. In such case we just need to report the untrackable frame as the base frame and all of its child frames.
With more samples reported I'm seeing this improves the performance of an internal benchmark by 2.5%.
Reviewed By: wenlei, wlei
Differential Revision: https://reviews.llvm.org/D102961
In D102742, I mistakenly put the split file designator above a bunch of
CHECK lines, which unintentionally removed the CHECKs from actually
being verified.
This can be verified by observing:
<build dir>/test/CodeGen/X86/Output/stack-protector-3.ll.tmp/main.ll
This is a replacement for D101938 for inserting vsetvli
instructions where needed. This new version changes how
we track the information in such a way that we can extend
it to be aware of VL/VTYPE changes in other blocks. Given
how much it changes the previous patch, I've decided to
abandon the previous patch and post this from scratch.
For now the pass consists of a single phase that assumes
the incoming state from other basic blocks is unknown. A
follow up patch will extend this with a phase to collect
information about how VL/VTYPE change in each block and
a second phase to propagate this information to the entire
function. This will be used by a third phase to do the
vsetvli insertion.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D102737
`WebAssemblyDebugValueManager` does not currently handle
`DBG_VALUE_LIST`, which is a recent addition to LLVM. We tried to
nullify them within the constructor of `WebAssemblyDebugValueManager` in
D102589, but it made the class error-prone to use because it deletes
instructions within the constructor and thus invalidates existing
iterators within the BB, so the user of the class should take special
care not to use invalidated iterators. This actually caused a bug in
ExplicitLocals pass.
Instead of trying to fix ExplicitLocals pass to make the iterator usage
correct, which is possible but error-prone, this adds
NullifyDebugValueLists pass that nullifies all `DBG_VALUE_LIST`
instructions before we run WebAssembly specific passes in the backend.
We can remove this pass after we implement handlers for
`DBG_VALUE_LIST`s in `WebAssemblyDebugValueManager` and elsewhere.
Fixes https://github.com/emscripten-core/emscripten/issues/14255.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D102999
Since d6de1e1a71406c75a4ea4d5a2fe84289f07ea3a1, no attributes is quivalent to
setting attribute to false.
This is a preliminary commit for https://reviews.llvm.org/D99080
This follows in steps of similar `getMemoryOpCost()` changes, D100099/D100684.
Intel SDM, `VPMASKMOV — Conditional SIMD Integer Packed Loads and Stores`:
```
Faults occur only due to mask-bit required memory accesses that caused the faults. Faults will not occur due to
referencing any memory location if the corresponding mask bit for that memory location is 0. For example, no
faults will be detected if the mask bits are all zero.
```
I.e., if mask is all-zeros, any address is fine.
Masked load/store's prime use-case is e.g. tail masking the loop remainder,
where for the last iteration, only first some few elements of a vector exist.
So much similarly, i don't see why must we scalarize non-power-of-two vectors,
iff the element type is something we can masked- store/load.
We simply need to legalize it, widen the mask, and be done with it.
And we even already count the cost of widening the mask.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D102990
If the local variable `NumOfVReg` isPowerOf2_32(NumOfVReg - 1) or isPowerOf2_32(NumOfVReg + 1), the ADDI and MUL instructions can be replaced with SLLI and ADD(or SUB) instructions.
Based on original patch by StephenFan.
Reviewed By: frasercrmck, StephenFan
Differential Revision: https://reviews.llvm.org/D100577
The current ad-hoc implementation used to determine whether a basic
block is unreachable doesn't work correctly in the general case (for
example it won't detect successors of unreachable blocks as
unreachable). This patch replaces it with the correct API that uses a
DominatorTree to answer the question correctly and quickly.
rdar://77181156
Differential Revision: https://reviews.llvm.org/D102963
Revert testcase changed in D87304 now the upgrader can correctly handle
the align attribute in upgrader.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D102880
to match fmod frem result must have the dividend sign. Previous implementation
had the wrong sign when passing negative numbers. For ex: frem(-16, 7) was
returning 5 instead of -2. We should just a ftrunc instead of floor when
lowering to get the right behavior.
Differential Revision: https://reviews.llvm.org/D102528
This follows from the underlying logic for binops and min/max.
Although it does not appear that we handle this for min/max
intrinsics currently.
https://alive2.llvm.org/ce/z/Kq9Xnh
This patch adds a first VPlan-based implementation of sinking of scalar
operands.
The current version traverse a VPlan once and processes all operands of
a predicated REPLICATE recipe. If one of those operands can be sunk,
it is moved to the block containing the predicated REPLICATE recipe.
Continue with processing the operands of the sunk recipe.
The initial version does not re-process candidates after other recipes
have been sunk. It also cannot partially sink induction increments at
the moment. The VPlan only contains WIDEN-INDUCTION recipes and if the
induction is used for example in a GEP, only the first lane is used and
in the lowered IR the adds for the other lanes can be sunk into the
predicated blocks.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D100258
By llvm-mca analysis, Haswell/Broadwell has a non-uniform vector shift recip-throughput cost of the AVX2 targets at 2 for both 128 and 256-bit vectors - XOP capable targets have better 128-bit vector shifts so improve the fallback in those cases.
The input IR for @load_extract_idx_var_i64_known_valid_by_assume
and @load_extract_idx_var_i64_not_known_valid_by_assume_after_load
has been swapped.
This patch fixes the test so that @load_extract_idx_var_i64_known_valid_by_assume
has the assume before the load and the other test has it after.
The findLoopPreheader function will currently not find a preheader if it
branches to multiple different loop headers. This patch adds an option
to relax that, allowing ARMLowOverheadLoops to process more loops
successfully. This helps with WhileLoopStart setup instructions that can
branch/fallthrough to the low overhead loop and to branch to a separate
loop from the same preheader (but I don't believe it is possible for
both loops to be low overhead loops).
Differential Revision: https://reviews.llvm.org/D102747
This reverts commit 94d54155e2f38b56171811757044a3e6f643c14b.
This fixes a sanitizer failure by moving scalarizeLoadExtract(I)
before foldSingleElementStore(I), which may remove instructions.
This makes sure that the blocks created for lowering memcpy to loops end
up with branches, even if they fall through to the successor. Otherwise
IfCvt is getting confused with unanalyzable branches and creating
invalid block layouts.
The extra branches should be removed as the tail predicated loop is
finalized in almost all cases.
The trip count for a memcpy/memset will be n/16 rounded up to the
nearest integer. So (n+15)>>4. The old code was including a BIC too, to
clear one of the bits, which does not seem correct. This remove the
extra BIC.
Note that ideally this would never actually be generated, as in the
creation of a tail predicated loop we will DCE that setup code, letting
the WLSTP perform the trip count calculation. So this doesn't usually
come up in testing (and apparently the ARMLowOverheadLoops pass does not
do any sort of validation on the tripcount). Only if the generation of
the WLTP fails will it use the incorrect BIC instructions.
Differential Revision: https://reviews.llvm.org/D102629
RVV code generation does not successfully custom-lower BUILD_VECTOR in all
cases. When it resorts to default expansion it may, on occasion, be expanded to
scalar stores through the stack. Unfortunately these stores may then be picked
up by the post-legalization DAGCombiner which merges them again. The merged
store uses a BUILD_VECTOR which is then expanded, and so on.
This patch addresses the issue by overriding the `mergeStoresAfterLegalization`
hook. A lack of granularity in this method (being passed the scalar type) means
we opt out in almost all cases when RVV fixed-length vector support is enabled.
The only exception to this rule are mask vectors, which are always either
custom-lowered or are expanded to a load from a constant pool.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102913
By llvm-mca analysis, Haswell/Broadwell has the worst v4i64 recip-throughput cost of the AVX2 targets at 6 (vs the currently used cost of 8). Similarly SkylakeServer (our only AVX512 target model) implements PMULLQ with an average cost of 1.5 (rounded up to 2.0), and the PMULUDQ-sequence (without AVX512DQ) as a cost of 6.
This patch adds a new combine that tries to scalarize chains of
`extractelement (load %ptr), %idx` to `load (gep %ptr, %idx)`. This is
profitable when extracting only a few elements out of a large vector.
At the moment, `store (extractelement (load %ptr), %idx), %ptr`
operations on large vectors result in huge code in the backend.
This can easily be triggered by using the matrix extension, e.g.
https://clang.godbolt.org/z/qsccPdPf4
This should complement D98240.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D100273
If we simplify values we sometimes end up with type mismatches. If the
value is a constant we can often cast it though to still allow
propagation. The logic is now put into a helper and it replaces some
ad hoc things we did before.
This also introduces the AA namespace for abstract attribute related
functions and types.
We have seen various problems when the call graph was not updated or
the updated did not succeed because it involved functions outside the
SCC. This patch adds assertions and checks to avoid accidentally
changing something outside the SCC that would impact the call graph.
It also prevents us from reanalyzing functions outside the current
SCC which could cause problems on its own. Note that the transformations
we do might cause the CG to be "more precise" but the original one would
always be a super set of the most precise one. Since the call graph is
by nature an approximation, it is good enough to have a super set of all
call edges.
The constant value lattice looks like this
```
<None>
|
<undef>
/ | \
... <0> ...
\ | /
<unknown>
```
We did not account for the undef and assumed a value meant we could not
change anymore. Now we actually check if we have the same value as
before, which will signal CHANGED to the users when we go from undef to
a specific constant.
This fixes, among other things, the bug exposed by @ipccp4 in
`value-simplify.ll`.
The state of AAPotentialValues tracks if undef is contained. It should
fold undef into the first non-undef value. However we missed a case
before. There was also a shadowing definition of two variables that
caused trouble. The test exposes both problems.
