This reverts r289215 (git SHA1 cb7b86a1). It breaks the ubsan build
because a DenseMap that keys off of `AssertingVH<T>` will hit UB when it
tries to cast the empty and tombstone keys to `T *` (due to insufficient
alignment).
This is the relevant stack trace (thanks to Mike Aizatsky):
#0 0x25cf100 in llvm::AssertingVH<llvm::PHINode>::getValPtr() const llvm/include/llvm/IR/ValueHandle.h:212:39
#1 0x25cea20 in llvm::AssertingVH<llvm::PHINode>::operator=(llvm::AssertingVH<llvm::PHINode> const&) llvm/include/llvm/IR/ValueHandle.h:234:19
#2 0x25d0092 in llvm::DenseMapBase<llvm::DenseMap<llvm::AssertingVH<llvm::PHINode>, llvm::detail::DenseSetEmpty, llvm::DenseMapInfo<llvm::AssertingVH<llvm::PHINode> >, llvm::detail::DenseSetPair<llvm::AssertingVH<llvm::PHINode> > >, llvm::AssertingVH<llvm::PHINode>, llvm::detail::DenseSetEmpty, llvm::DenseMapInfo<llvm::AssertingVH<llvm::PHINode> >, llvm::detail::DenseSetPair<llvm::AssertingVH<llvm::PHINode> > >::clear() llvm/include/llvm/ADT/DenseMap.h:113:23
llvm-svn: 289482
Power8 has MTVSRWZ but no LXSIBZX/LXSIHZX, so move 1 or 2 bytes to VSR through MTVSRWZ is much faster than store the extended value into stack and load it with LXSIWZX.
This patch fixes pr31144.
Differential Revision: https://reviews.llvm.org/D27287
llvm-svn: 289473
Summary:
I looked at libgcc's implementation (which is based on the paper,
Software for Doubled-Precision Floating-Point Computations", by Seppo Linnainmaa,
ACM TOMS vol 7 no 3, September 1981, pages 272-283.) and made it generic to
arbitrary IEEE floats.
Differential Revision: https://reviews.llvm.org/D26817
llvm-svn: 289472
This patch ensures the correct minimum bit width during type-shrinking.
Previously when type-shrinking, we always sign-extended values back to their
original width. However, if we are going to sign-extend, and the sign bit is
unknown, we have to increase the minimum bit width by one bit so the
sign-extend will fill the upper bits correctly. If the sign bit is known to be
zero, we can perform a zero-extend instead. This should fix PR31243.
Reference: https://llvm.org/bugs/show_bug.cgi?id=31243
Differential Revision: https://reviews.llvm.org/D27466
llvm-svn: 289470
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. By default, use this for branch targets
and some other cases that have no specified source location, to
prevent inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Updated patch allows enabling or suppressing this behavior for all
unspecified source locations.
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 289468
Summary:
I'm planning on changing the way we load metadata to enable laziness.
I'm getting lost in this gigantic files, and gigantic class that is the bitcode
reader. This is a first toward splitting it in a few coarse components that
are more easily understandable.
Reviewers: pcc, tejohnson
Subscribers: mgorny, llvm-commits, dexonsmith
Differential Revision: https://reviews.llvm.org/D27646
llvm-svn: 289461
Summary:
Compiling with GCC 5 or later can fail with a bogus error "constructor
required before non-static data member for
llvm::ValueEnumerator::MDRange::First has been parsed".
This was originally fixed upstream in GCC PR 70528, but later this fix
was reverted, and released versions of GCC still show the bogus error.
To work around this, replace MDRange's declaration of a default
constructor with a definition.
Reviewers: dexonsmith, rsmith, rivanvx
Subscribers: llvm-commits, dim, dexonsmith
Differential Revision: https://reviews.llvm.org/D18730
llvm-svn: 289454
Reverts r289412. It caused an OOB PHI operand access in instcombine when
ASan is enabled. Reduction in progress.
Also reverts "[SCEVExpander] Add a test case related to r289412"
llvm-svn: 289453
Summary:
While the result is constant across a single primitive, each pixel
shader wave can have pixels from multiple primitives.
Reviewers: tstellarAMD, arsenm
Subscribers: kzhuravl, wdng, yaxunl, llvm-commits, tony-tye
Differential Revision: https://reviews.llvm.org/D27572
llvm-svn: 289447
We could truncate the condition and then try to fold the add into the
original condition value causing wrong case constants to be used.
Move the offset transform ahead of the truncate transform and return
after each transform, so there's no chance of getting confused values.
Fix for:
https://llvm.org/bugs/show_bug.cgi?id=31260
llvm-svn: 289442
Summary:
As discussed on mailing list, for ThinLTO importing we don't need
to import all the fields of the DICompileUnit. Don't import enums,
macros, retained types lists. Also only import local scoped imported
entities. Since we don't currently import any global variables,
we also don't need to import the list of global variables (added an
assert to verify none are being imported).
This is being done by pre-populating the value map entries to map
the unneeded metadata to nullptr. For the imported entities, we can
simply replace the source module's list with a new list containing
only those needed imported entities. This is done in the IRLinker
constructor so that value mapping automatically does the desired
mapping.
Reviewers: mehdi_amini, dexonsmith, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27635
llvm-svn: 289441
PMULDQ returns the 64-bit result of the signed multiplication of the lower 32-bits of vXi64 vector inputs, we can lower with this if the sign bits stretch that far.
Differential Revision: https://reviews.llvm.org/D27657
llvm-svn: 289426
These intrinsics only load a single element. We should use sse_loadf32/f64 to give more options of what loads it can match.
Currently these instructions are often only getting their load folded thanks to the load folding in the peephole pass. I plan to add more types of loads to sse_load_f32/64 so we can match without the peephole.
llvm-svn: 289423
Summary:
These intrinsic instructions are all selected from intrinsics that have well defined behavior for where the upper bits come from. It's not the same place as the lower bits.
As you can see we were suppressing load folding for these instructions in some cases. In none of the cases was the separate load helping avoid a partial dependency on the destination register. So we should just go ahead and allow the load to be folded.
Only foldMemoryOperand was suppressing folding for these. They all have patterns for folding sse_load_f32/f64 that aren't gated with OptForSize, but sse_load_f32/f64 doesn't allow 128-bit vector loads. It only allows scalar_to_vector and vzmovl of scalar loads to match. There's no reason we can't allow a 128-bit vector load to be narrowed so I would like to fix sse_load_f32/f64 to allow that. And if I do that it changes some of these same test cases to fold the load too.
Reviewers: spatel, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27611
llvm-svn: 289419
SCEVExpand computes the insertion point for the components of a SCEV to be code
generated. When it comes to generating code for a division, SCEVexpand would
not be able to check (at compilation time) all the conditions necessary to avoid
a division by zero. The patch disables hoisting of expressions containing
divisions by anything other than non-zero constants in order to avoid hoisting
these expressions past conditions that should hold before doing the division.
The patch passes check-all on x86_64-linux.
Differential Revision: https://reviews.llvm.org/D27216
llvm-svn: 289412
When the load node which the broadcast instruction broadcasts has multiple uses, it cannot be folded.
A fallback pattern is added to catch these cases and provide another solution.
Differential Revision: https://reviews.llvm.org/D27661
llvm-svn: 289404
Summary:
Fix a corner case in `MDNode::getMostGenericTBAA` where we can sometimes
generate invalid TBAA metadata.
Reviewers: chandlerc, hfinkel, mehdi_amini, manmanren
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D26635
llvm-svn: 289403
Summary:
This change adds some verification in the IR verifier around struct path
TBAA metadata.
Other than some basic sanity checks (e.g. we get constant integers where
we expect constant integers), this checks:
- That by the time an struct access tuple `(base-type, offset)` is
"reduced" to a scalar base type, the offset is `0`. For instance, in
C++ you can't start from, say `("struct-a", 16)`, and end up with
`("int", 4)` -- by the time the base type is `"int"`, the offset
better be zero. In particular, a variant of this invariant is needed
for `llvm::getMostGenericTBAA` to be correct.
- That there are no cycles in a struct path.
- That struct type nodes have their offsets listed in an ascending
order.
- That when generating the struct access path, you eventually reach the
access type listed in the tbaa tag node.
Reviewers: dexonsmith, chandlerc, reames, mehdi_amini, manmanren
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D26438
llvm-svn: 289402
We have found that -- when the selected subarchitecture has a scheduling model
and we are not optimizing for size -- the machine-instruction combiner uses a
too-simple algorithm to compute the cost of one of the two alternatives [before
and after running a combining pass on a section of code], and therefor it throws
away the combination results too often.
This fix has the potential to help any ISA with the potential to combine
instructions and for which at least one subarchitecture has a scheduling model.
As of now, this is only known to definitely affect AArch64 subarchitectures with
a scheduling model.
Regression tested on AMD64/GNU-Linux, new test case tested to fail on an
unpatched compiler and pass on a patched compiler.
Patch by Abe Skolnik and Sebastian Pop.
llvm-svn: 289399
This is NFC today, but won't be once D27216 (or an equivalent patch) is
in.
This change fixes a design problem in SCEVExpander -- it relied on a
hoisting optimization to generate correct code for add recurrences.
This meant changing the hoisting optimization to not kick in under
certain circumstances (to avoid speculating faulting instructions, say)
would break correctness.
The fix is to make the correctness requirements explicit, and have it
not rely on the hoisting optimization for correctness.
llvm-svn: 289397