Summary:
AArch64 can fold some shift+extend operations on the RHS operand of
comparisons, so swap the operands if that makes sense.
This provides a fix for https://bugs.llvm.org/show_bug.cgi?id=38751
Reviewers: efriedma, t.p.northover, javed.absar
Subscribers: mcrosier, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D53067
llvm-svn: 344439
Summary:
These new intrinsics have the semantics of the `minimum` and `maximum`
operations specified by the latest draft of IEEE 754-2018. Unlike
llvm.minnum and llvm.maxnum, these new intrinsics propagate NaNs and
always treat -0.0 as less than 0.0. `minimum` and `maximum` lower
directly to the existing `fminnan` and `fmaxnan` ISel DAG nodes. It is
safe to reuse these DAG nodes because before this patch were only
emitted in situations where there were known to be no NaN arguments or
where NaN propagation was correct and there were known to be no zero
arguments. I know of only four backends that lower fminnan and
fmaxnan: WebAssembly, ARM, AArch64, and SystemZ, and each of these
lowers fminnan and fmaxnan to instructions that are compatible with
the IEEE 754-2018 semantics.
Reviewers: aheejin, dschuff, sunfish, javed.absar
Subscribers: kristof.beyls, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D52764
llvm-svn: 344437
Summary:
GetOrCreateFunctionComdat is currently used in SanitizerCoverage,
where it's defined. I'm planing to use it in HWASAN as well,
so moving it into a common location.
NFC
Reviewers: morehouse
Reviewed By: morehouse
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53218
llvm-svn: 344433
SelectionDAGBuilder::visitShift will always zero-extend a shift amount when it
is promoted to the ShiftAmountTy. This results in zero-extension (masking)
which is unnecessary for RISC-V as the shift operations only read the lower 5
or 6 bits (RV32 or RV64).
I initially proposed adding a getExtendForShiftAmount hook so the shift amount
can be any-extended (D52975). @efriedma explained this was unsafe, so I have
instead eliminate the unnecessary and operations at instruction selection time
in a manner similar to X86InstrCompiler.td.
Differential Revision: https://reviews.llvm.org/D53224
llvm-svn: 344432
Generic legalization should be able to finish legalizing the EXTRACT_SUBVECTOR probably by turning it into a BUILD_VECTOR. But we should emit the simplest sequence.
llvm-svn: 344424
The algorithm we would do previously was identical to generic legalization. If we ever switch to legalizing integer vectors via widening we'll be able to kill off the code since it now only runs for promotion.
llvm-svn: 344423
This is more consistent with what we usually do and matches some code X86 custom emits in some cases that I think I can cleanup.
The MIPS test change just looks to be an instruction ordering change.
llvm-svn: 344422
The initial patch was not reviewed, and does not have any tests;
it should not have been merged.
This reverts 344395, 344390, 344387, 344385, 344381, 344376,
and 344366.
llvm-svn: 344405
This saves a conversion to extracts and build_vector. We already do this when both the result and the input need to be widened to the same type.
This changed the sse-intrinsics-fast-isel test because we don't lower (insert_vector_elt (scalar_to_vector X), Y, 1) well. We turn it into (vector_shuffle (scalar_to_vector X), (scalar_to_vector Y), <0, 4, 2, 3>) losing track of the fact that the upper elts could be undef.
We should probably find a way to prevent the scalarization of the <2 x f32> load on these tests.
llvm-svn: 344404
If the input type is widened as well, but we still were forced to unroll, we shouldn't be considering the widened input element count. We should only create as many scalar operations as the original type called for.
This will be important for an upcoming patch.
llvm-svn: 344403
Summary: We can fill in the command line and compiler path later if we want.
Reviewers: zturner
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53179
llvm-svn: 344393
This fixes a problem introduced by r344334. A write from a non-zero move
eliminated at register renaming stage was not correctly handled by the PRF. This
would have led to an assertion failure if the processor model declares a PRF
that enables non-zero move elimination.
llvm-svn: 344392
Summary:
Linking with the /OPT:REF linker flag when building COFF files causes
the linker to strip SanitizerCoverage's constructors. Prevent this by
giving the constructors WeakODR linkage and by passing the linker a
directive to include sancov.module_ctor.
Include a test in compiler-rt to verify libFuzzer can be linked using
/OPT:REF
Reviewers: morehouse, rnk
Reviewed By: morehouse, rnk
Subscribers: rnk, morehouse, hiraditya
Differential Revision: https://reviews.llvm.org/D52119
llvm-svn: 344391
This a resubmission of a patch which was previously reverted
due to breaking several lld tests. The issues causing those
failures have been fixed, so the patch is now resubmitted.
---Original Commit Message---
While it doesn't make a *ton* of sense for POSIX paths to be
in PDBs, it's possible to occur in real scenarios involving
cross compilation.
The tools need to be able to handle this, because certain types
of debugging scenarios are possible without a running process
and so don't necessarily require you to be on a Windows system.
These include post-mortem debugging and binary forensics (e.g.
using a debugger to disassemble functions and examine symbols
without running the process).
There's changes in clang, LLD, and lldb in this patch. After
this the cross-platform disassembly and source-list tests pass
on Linux.
Furthermore, the behavior of LLD can now be summarized by a much
simpler rule than before: Unless you specify /pdbsourcepath and
/pdbaltpath, the PDB ends up with paths that are valid within
the context of the machine that the link is performed on.
Differential Revision: https://reviews.llvm.org/D53149
llvm-svn: 344377
* Move #include outside of namespaces
* Add missing #include
* Add out-of-line virtual destructor to BTFTypeEntry
designated initializers should also be fixed
llvm-svn: 344376
Summary:
We tell the user to file a bug report on LLVM right now, and
SIGPIPE isn't LLVM's fault so our error message is wrong.
Allows frontends to detect SIGPIPE from writing to closed readers.
This can be seen commonly from piping into head, tee, or split.
Fixes PR25349, rdar://problem/14285346, b/77310947
Reviewers: jfb
Reviewed By: jfb
Subscribers: majnemer, kristina, llvm-commits, thakis, srhines
Differential Revision: https://reviews.llvm.org/D53000
llvm-svn: 344372
BTF is the debug format for BPF, a kernel virtual machine
and widely used for tracing, networking and security, etc ([1]).
Currently only instruction streams are passed to kernel,
the kernel verifier verifies them before execution. In order to
provide better visibility of bpf programs to user space
tools, some debug information, e.g., function names and
debug line information are desirable for kernel so tools
can get such information with better annotation
for jited instructions for performance or other reasons.
The dwarf is too complicated in kernel and for BPF.
Hence, BTF is designed to be the debug format for BPF ([2]).
Right now, pahole supports BTF for types, which
are generated based on dwarf sections in the ELF file.
In order to annotate performance metrics for jited bpf insns,
it is necessary to pass debug line info to the kernel.
Furthermore, we want to pass the actual code to the
kernel because of the following reasons:
. bpf program typically is small so storage overhead
should be small.
. in bpf land, it is totally possible that
an application loads the bpf program into the
kernel and then that application quits, so
holding debug info by the user space application
is not practical.
. having source codes directly kept by kernel
would ease deployment since the original source
code does not need ship on every hosts and
kernel-devel package does not need to be
deployed even if kernel headers are used.
The only reliable time to get the source code is
during compilation time. This will result in both more
accurate information and easier deployment as
stated in the above.
Another consideration is for JIT. The project like bcc
use MCJIT to compile a C program into bpf insns and
load them to the kernel ([3]). The generated BTF sections
will be readily available for such cases as well.
This patch implemented generation of BTF info in llvm
compiler. The BTF related sections will be generated
when both -target bpf and -g are specified. Two sections
are generated:
.BTF contains all the type and string information, and
.BTF.ext contains the func_info and line_info.
The separation is related to how two sections are used
differently in bpf loader, e.g., linux libbpf ([4]).
The .BTF section can be loaded into the kernel directly
while .BTF.ext needs loader manipulation before loading
to the kernel. The format of the each section is roughly
defined in llvm:include/llvm/MC/MCBTFContext.h and
from the implementation in llvm:lib/MC/MCBTFContext.cpp.
A later example also shows the contents in each section.
The type and func_info are gathered during CodeGen/AsmPrinter
by traversing dwarf debug_info. The line_info is
gathered in MCObjectStreamer before writing to
the object file. After all the information is gathered,
the two sections are emitted in MCObjectStreamer::finishImpl.
With cmake CMAKE_BUILD_TYPE=Debug, the compiler can
dump out all the tables except insn offset, which
will be resolved later as relocation records.
The debug type "btf" is used for BTFContext dump.
Dwarf tests the debug info generation with
llvm-dwarfdump to decode the binary sections and
check whether the result is expected. Currently
we do not have such a tool yet. We will implement
btf dump functionality in bpftool ([5]) as the bpftool is
considered the recommended tool for bpf introspection.
The implementation for type and func_info is tested
with linux kernel test cases. The line_info is visually
checked with dump from linux kernel libbpf ([4]) and
checked with readelf dumping section raw data.
Note that the .BTF and .BTF.ext information will not
be emitted to assembly code and there is no assembler
support for BTF either.
In the below, with a clang/llvm built with CMAKE_BUILD_TYPE=Debug,
Each table contents are shown for a simple C program.
-bash-4.2$ cat -n test.c
1 struct A {
2 int a;
3 char b;
4 };
5
6 int test(struct A *t) {
7 return t->a;
8 }
-bash-4.2$ clang -O2 -target bpf -g -mllvm -debug-only=btf -c test.c
Type Table:
[1] FUNC name_off=1 info=0x0c000001 size/type=2
param_type=3
[2] INT name_off=12 info=0x01000000 size/type=4
desc=0x01000020
[3] PTR name_off=0 info=0x02000000 size/type=4
[4] STRUCT name_off=16 info=0x04000002 size/type=8
name_off=18 type=2 bit_offset=0
name_off=20 type=5 bit_offset=32
[5] INT name_off=22 info=0x01000000 size/type=1
desc=0x02000008
String Table:
0 :
1 : test
6 : .text
12 : int
16 : A
18 : a
20 : b
22 : char
27 : test.c
34 : int test(struct A *t) {
58 : return t->a;
FuncInfo Table:
sec_name_off=6
insn_offset=<Omitted> type_id=1
LineInfo Table:
sec_name_off=6
insn_offset=<Omitted> file_name_off=27 line_off=34 line_num=6 column_num=0
insn_offset=<Omitted> file_name_off=27 line_off=58 line_num=7 column_num=3
-bash-4.2$ readelf -S test.o
......
[12] .BTF PROGBITS 0000000000000000 0000028d
00000000000000c1 0000000000000000 0 0 1
[13] .BTF.ext PROGBITS 0000000000000000 0000034e
0000000000000050 0000000000000000 0 0 1
[14] .rel.BTF.ext REL 0000000000000000 00000648
0000000000000030 0000000000000010 16 13 8
......
-bash-4.2$
The latest linux kernel ([6]) can already support .BTF with type information.
The [7] has the reference implementation in linux kernel side
to support .BTF.ext func_info. The .BTF.ext line_info support is not
implemented yet. If you have difficulty accessing [6], you can
manually do the following to access the code:
git clone https://github.com/yonghong-song/bpf-next-linux.git
cd bpf-next-linux
git checkout btf
The change will push to linux kernel soon once this patch is landed.
References:
[1]. https://www.kernel.org/doc/Documentation/networking/filter.txt
[2]. https://lwn.net/Articles/750695/
[3]. https://github.com/iovisor/bcc
[4]. https://github.com/torvalds/linux/tree/master/tools/lib/bpf
[5]. https://github.com/torvalds/linux/tree/master/tools/bpf/bpftool
[6]. https://github.com/torvalds/linux
[7]. https://github.com/yonghong-song/bpf-next-linux/tree/btf
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Differential Revision: https://reviews.llvm.org/D52950
llvm-svn: 344366
This is the planned follow-up to D52997. Here we are reducing horizontal vector math codegen
by default. AMD Jaguar (btver2) should have no difference with this patch because it has
fast-hops. (If we want to set that bit for other CPUs, let me know.)
The code changes are small, but there are many test diffs. For files that are specifically
testing for hops, I added RUNs to distinguish fast/slow, so we can see the consequences
side-by-side. For files that are primarily concerned with codegen other than hops, I just
updated the CHECK lines to reflect the new default codegen.
To recap the recent horizontal op story:
1. Before rL343727, we were producing hops for all subtargets for a variety of patterns.
Hops were likely not optimal for all targets though.
2. The IR improvement in r343727 exposed a hole in the backend hop pattern matching, so
we reduced hop codegen for all subtargets. That was bad for Jaguar (PR39195).
3. We restored the hop codegen for all targets with rL344141. Good for Jaguar, but
probably bad for other CPUs.
4. This patch allows us to distinguish when we want to produce hops, so everyone can be
happy. I'm not sure if we have the best predicate here, but the intent is to undo the
extra hop-iness that was enabled by r344141.
Differential Revision: https://reviews.llvm.org/D53095
llvm-svn: 344361
Summary:
Reland of
- r344197 "[MC][ELF] compute entity size for explicit sections"
- r344206 "[MC][ELF] Fix section_mergeable_size.ll"
after being reverted in r344278 due to build breakages from not
specifying a target triple.
Move test from test/CodeGen/Generic/ to test/MC/ELF/.
Add explicit target triple so we don't try to run
this test on non ELF targets.
Reported: https://reviews.llvm.org/D53056#1261707
Reviewers: fhahn, rnk, espindola, NoQ
Reviewed By: fhahn, rnk
Subscribers: NoQ, MaskRay, rengolin, emaste, arichardson, llvm-commits, pirama, srhines
Differential Revision: https://reviews.llvm.org/D53146
llvm-svn: 344360
If you have the string /usr/bin, prior to this patch it would not
be quoted by our YAML serializer. But a string like C:\src would
be, due to the presence of a backslash. This makes the quoting
rules of basically every single file path different depending on
the path syntax (posix vs. Windows).
While technically not required by the YAML specification to quote
forward slashes, when the behavior of paths is inconsistent it
makes it difficult to portably write FileCheck lines that will
work with either kind of path.
Differential Revision: https://reviews.llvm.org/D53169
llvm-svn: 344359
This reverts commit b86c16ad8c97dadc1f529da72a5bb74e9eaed344.
This is being reverted because I forgot to write a useful
commit message, so I'm going to resubmit it with an actual
commit message.
llvm-svn: 344358
Generalize SelectionDAGLegalize's CTLZ expansion to handle vectors - lets VectorLegalizer::ExpandCTLZ to just pass the expansion on instead of repeating the same codegen.
llvm-svn: 344349
Pull out repeated byte sum stage for popcount of vector elements > 8bits.
This allows us to simplify the LUT/BITMATH popcnt code to always assume vXi8 vectors, and also improves avx512bitalg codegen which only has access to vpopcntb/vpopcntw.
llvm-svn: 344348
The current BitPermutationSelector generates a code to build a value by tracking two types of bits: ConstZero and Variable.
ConstZero means a bit we need to mask off and Variable is a bit we copy from an input value.
This patch add third type of bits VariableKnownToBeZero caused by AssertZext node or zero-extending load node.
VariableKnownToBeZero means a bit comes from an input value, but it is known to be already zero. So we do not need to mask them.
VariableKnownToBeZero enhances flexibility to group bits, since we can avoid redundant masking for these bits.
This patch also renames "HasZero" to "NeedMask" since now we may skip masking even when we have zeros (of type VariableKnownToBeZero).
Differential Revision: https://reviews.llvm.org/D48025
llvm-svn: 344347
Summary:
Otherwise, at least on Mac, the linker eliminates unused symbols which
causes libFuzzer to error out due to a mismatch of the sizes of coverage tables.
Issue in Chromium: https://bugs.chromium.org/p/chromium/issues/detail?id=892167
Reviewers: morehouse, kcc, george.karpenkov
Reviewed By: morehouse
Subscribers: kubamracek, llvm-commits
Differential Revision: https://reviews.llvm.org/D53113
llvm-svn: 344345
The documentation stated "Access to explicit operands of the
instruction." This is misleading, as it also lists implicit operands.
Patch by Philip Ginsbach.
Differential Revision: https://reviews.llvm.org/D35481
llvm-svn: 344338
Fixes PR32160 by reducing the size of PSHUFB if we only use one of the lanes.
This approach can probably be generalized to handle any target shuffle (and any subvector index) but we have no test coverage at the moment.
llvm-svn: 344336
This patch adds the ability to identify instructions that are "move elimination
candidates". It also allows scheduling models to describe processor register
files that allow move elimination.
A move elimination candidate is an instruction that can be eliminated at
register renaming stage.
Each subtarget can specify which instructions are move elimination candidates
with the help of tablegen class "IsOptimizableRegisterMove" (see
llvm/Target/TargetInstrPredicate.td).
For example, on X86, BtVer2 allows both GPR and MMX/SSE moves to be eliminated.
The definition of 'IsOptimizableRegisterMove' for BtVer2 looks like this:
```
def : IsOptimizableRegisterMove<[
InstructionEquivalenceClass<[
// GPR variants.
MOV32rr, MOV64rr,
// MMX variants.
MMX_MOVQ64rr,
// SSE variants.
MOVAPSrr, MOVUPSrr,
MOVAPDrr, MOVUPDrr,
MOVDQArr, MOVDQUrr,
// AVX variants.
VMOVAPSrr, VMOVUPSrr,
VMOVAPDrr, VMOVUPDrr,
VMOVDQArr, VMOVDQUrr
], CheckNot<CheckSameRegOperand<0, 1>> >
]>;
```
Definitions of IsOptimizableRegisterMove from processor models of a same
Target are processed by the SubtargetEmitter to auto-generate a target-specific
override for each of the following predicate methods:
```
bool TargetSubtargetInfo::isOptimizableRegisterMove(const MachineInstr *MI)
const;
bool MCInstrAnalysis::isOptimizableRegisterMove(const MCInst &MI, unsigned
CPUID) const;
```
By default, those methods return false (i.e. conservatively assume that there
are no move elimination candidates).
Tablegen class RegisterFile has been extended with the following information:
- The set of register classes that allow move elimination.
- Maxium number of moves that can be eliminated every cycle.
- Whether move elimination is restricted to moves from registers that are
known to be zero.
This patch is structured in three part:
A first part (which is mostly boilerplate) adds the new
'isOptimizableRegisterMove' target hooks, and extends existing register file
descriptors in MC by introducing new fields to describe properties related to
move elimination.
A second part, uses the new tablegen constructs to describe move elimination in
the BtVer2 scheduling model.
A third part, teaches llm-mca how to query the new 'isOptimizableRegisterMove'
hook to mark instructions that are candidates for move elimination. It also
teaches class RegisterFile how to describe constraints on move elimination at
PRF granularity.
llvm-mca tests for btver2 show differences before/after this patch.
Differential Revision: https://reviews.llvm.org/D53134
llvm-svn: 344334