Summary:
canUnrollCompletely takes `unsigned` values for `UnrolledCost` and
`RolledDynamicCost` but is passed in `uint64_t`s that are silently
truncated. Because of this, when `UnrolledSize` is a large integer
that has a small remainder with UINT32_MAX, LLVM tries to completely
unroll loops with high trip counts.
Reviewers: mzolotukhin, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10293
llvm-svn: 239218
CVP wants to analyze the condition operand of a select along an edge.
It succeeds in getting back a Constant but not a ConstantInt. Instead,
it gets a ConstantExpr. It then assumes that the Constant must be equal
to false because it isn't equal to true.
Instead, perform an additional comparison.
This fixes PR23752.
llvm-svn: 239217
If we have (select a, b, c), it is sometimes valid to simplify this to a
single select operand. However, doing so is only valid if the
computation doesn't inject poison into the computation.
It might be helpful to consider the following example:
(select (icmp ne %i, INT_MAX), (add nsw %i, 1), INT_MIN)
The select is equivalent to (add %i, 1) but not (add nsw %i, 1).
Self hosting on x86_64 revealed that this occurs very, very rarely so
bailing out is hopefully pretty reasonable.
llvm-svn: 239215
Linking the debug frame section is actually very easy as we just have to
patch the start address in the FDE header and then copy the rest of the
FDE without even looking at it. The only small complexity comes from the
handling of the CIEs that we should unique across object file. This is
also really easy by using a StringMap keyed on the raw contents of the
CIE.
llvm-svn: 239198
The main use of the YAML debug map format is for testing inside LLVM. If we have IR
files in the tests used to generate object files, then we obviously don't know the
addresses of the symbols inside the object files beforehand.
This change lets the YAML import lookup the addresses in the object files and rewrite
them. This will allow to have test that really don't need any binary input.
llvm-svn: 239189
This reverts commit r239141. This commit was an attempt to reintroduce
a previous patch that broke many self-hosting bots with clang timeouts,
but it still has slowdown issues, at least on ARM, increasing the
compilation time (stage 2, clang's) by 5x.
llvm-svn: 239175
For targets with a free fneg, this fold is always a net loss if it
ends up duplicating the multiply, so definitely avoid it.
This might be true for some targets without a free fneg too, but
I'll leave that for future investigation.
llvm-svn: 239167
The new naming is (to me) much easier to understand. Here is a summary
of the new state of the world:
- '*Threshold' is the threshold for full unrolling. It is measured
against the estimated unrolled cost as computed by getUserCost in TTI
(or CodeMetrics, etc). We will exceed this threshold when unrolling
loops where unrolling exposes a significant degree of simplification
of the logic within the loop.
- '*PercentDynamicCostSavedThreshold' is the percentage of the loop's
estimated dynamic execution cost which needs to be saved by unrolling
to apply a discount to the estimated unrolled cost.
- '*DynamicCostSavingsDiscount' is the discount applied to the estimated
unrolling cost when the dynamic savings are expected to be high.
When actually analyzing the loop, we now produce both an estimated
unrolled cost, and an estimated rolled cost. The rolled cost is notably
a dynamic estimate based on our analysis of the expected execution of
each iteration.
While we're still working to build up the infrastructure for making
these estimates, to me it is much more clear *how* to make them better
when they have reasonably descriptive names. For example, we may want to
apply estimated (from heuristics or profiles) dynamic execution weights
to the *dynamic* cost estimates. If we start doing that, we would also
need to track the static unrolled cost and the dynamic unrolled cost, as
only the latter could reasonably be weighted by profile information.
This patch is sadly not without functionality change for the new unroll
analysis logic. Buried in the heuristic management were several things
that surprised me. For example, we never subtracted the optimized
instruction count off when comparing against the unroll heursistics!
I don't know if this just got lost somewhere along the way or what, but
with the new accounting of things, this is much easier to keep track of
and we use the post-simplification cost estimate to compare to the
thresholds, and use the dynamic cost reduction ratio to select whether
we can exceed the baseline threshold.
The old values of these flags also don't necessarily make sense. My
impression is that none of these thresholds or discounts have been tuned
yet, and so they're just arbitrary placehold numbers. As such, I've not
bothered to adjust for the fact that this is now a discount and not
a tow-tier threshold model. We need to tune all these values once the
logic is ready to be enabled.
Differential Revision: http://reviews.llvm.org/D9966
llvm-svn: 239164
These are added mainly for the benefit of clang, but this also means that they
are now allowed in .fpu directives and we emit the correct .fpu directive when
single-precision-only is used.
Differential Revision: http://reviews.llvm.org/D10238
llvm-svn: 239151
Summary:
Only restoring AvailableFeatures is not enough and will lead to buggy behaviour.
For example, if we have a feature enabled and we ".set pop", the next time we try
to ".set" that feature nothing will happen because the "!(STI.getFeatureBits()[Feature])"
check will be false, because we didn't restore STI.FeatureBits.
In order to fix this, we need to make MipsAssemblerOptions remember the STI.FeatureBits
instead of the AvailableFeatures and then regenerate AvailableFeatures each time we ".set pop".
This is because, AFAIK, there is no way to convert from AvailableFeatures back to STI.FeatureBits,
but the reverse is possible by using ComputeAvailableFeatures(STI.FeatureBits).
I also moved the updating of AssemblerOptions inside the "if" statement in
setFeatureBits() and clearFeatureBits(), as there is no reason to update if
nothing changes.
Reviewers: dsanders, mkuper
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9156
llvm-svn: 239144
isInductionPHI wants to calculate the stride based on the pointee size.
However, this is not possible when the pointee is zero sized.
This fixes PR23763.
llvm-svn: 239143
Also, moved test cases from CodeGen/X86/fold-buildvector-bug.ll into
CodeGen/X86/buildvec-insertvec.ll and regenerated CHECK lines using
update_llc_test_checks.py.
llvm-svn: 239142
I don't have the IR which is causing the build bot breakage but I can
postulate as to why they are timing out:
1. SimplifyWithOpReplaced was stripping flags from the simplified value.
2. visitSelectInstWithICmp was overriding SimplifyWithOpReplaced because
it's simplification wasn't correct.
3. InstCombine would revisit the add instruction and note that it can
rederive the flags.
4. By modifying the value, we chose to revisit instructions which reuse
the value. One of the instructions is the original select, causing
LLVM to never reach fixpoint.
Instead, strip the flags only when we are sure we are going to perform
the simplification.
llvm-svn: 239141
We cleverly handle cases where computation done in one argument of a select
instruction is suitable for the other operand, thus obviating the need
of the select and the comparison. However, the other operand cannot
have flags.
This fixes PR23757.
llvm-svn: 239115
gc.statepoint intrinsics with a far immediate call target
were lowered incorrectly as pc-rel32 calls.
This change fixes the problem, and generates an indirect call
via a scratch register.
For example:
Intrinsic:
%safepoint_token = call i32 (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 0, i32 0, void ()* inttoptr (i64 140727162896504 to void ()*), i32 0, i32 0, i32 0, i32 0)
Old Incorrect Lowering:
callq 140727162896504
New Correct Lowering:
movabsq $140727162896504, %rax
callq *%rax
In lowerCallFromStatepoint(), the callee-target was modified and
represented as a "TargetConstant" node, rather than a "Constant" node.
Undoing this modification enabled LowerCall() to generate the
correct CALL instruction.
llvm-svn: 239114
Summary:
A small bit that I missed when I updated the X86 backend to account for
the Win64 calling convention on non-Windows. Now we don't use dead
non-volatile registers when emitting a Win64 indirect tail call on
non-Windows.
Should fix PR23710.
Test Plan: Added test for the correct behavior based on the case I posted to PR23710.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10258
llvm-svn: 239111
Report proper error code from MachOObjectFile constructor if we
can't parse another segment load command (we already return a proper
error if segment load command contents is suspicious).
llvm-svn: 239109
The big/small ordering here is based on signed values so SmallValue will
be INT_MIN and BigValue 0. This shouldn't be a problem but the code
assumed that BigValue always had more bits set than SmallValue.
We used to just miss the transformation, but a recent refactoring of
mine turned this into an assertion failure.
llvm-svn: 239105
Basic block selection involves checking successor BBs for PHI nodes
that depend on the current BB. In case such BBs are found, the value
being selected is a constant and such constant already exists in
current BB, it's value is reused.
This might lead to wrong locations in some situations, especially if
same constant value ends up being materialized twice in two different
ways, which discards that sharing and leaves us with wrong debug
location in the successor BB.
In code this involves the following sequence of calls:
SelectionDAGBuilder::HandlePHINodesInSuccessorBlocks ->
SelectionDAGBuilder::CopyValueToVirtualRegister ->
SelectionDAGBuilder::getNonRegisterValue
llvm-svn: 239089
Now that we can look at users, we can trivially do this: when we would
have otherwise disabled GlobalMerge (currently -O<3), we can just run
it for minsize functions, as it's usually a codesize win.
Differential Revision: http://reviews.llvm.org/D10054
llvm-svn: 239087
Fix the FIXME and remove this old as(1) compat option. It was useful for
bringup of the integrated assembler to diff object files, but now it's
just causing more relocations than strictly necessary to be generated.
rdar://21201804
llvm-svn: 239084
Summary:
With this patch, NVPTXLowerKernelArgs converts a kernel pointer argument to a
pointer in the global address space. This change, along with
NVPTXFavorNonGenericAddrSpaces, allows the NVPTX backend to emit ld.global.*
and st.global.* for accessing kernel pointer arguments.
Minor changes:
1. refactor: extract function convertToPointerInAddrSpace
2. fix a bug in the test case in bug21465.ll
Test Plan: lower-kernel-ptr-arg.ll
Reviewers: eliben, meheff, jholewinski
Reviewed By: jholewinski
Subscribers: wengxt, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D10154
llvm-svn: 239082
Summary:
Properly report the error in segment load commands from MachOObjectFile
constructor instead of crashing the program.
Adjust the test case accordingly.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
llvm-svn: 239081
Summary:
Currently all load commands are parsed in MachOObjectFile constructor.
If the next load command cannot be parsed, or if command size is too
small, properly report it through the error code and fail to construct
the object, instead of crashing the program.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
llvm-svn: 239080
