Reverting to investigate layering effects of MCJIT not linking
libCodeGen but using TargetMachine::getNameWithPrefix() breaking the
lldb bots.
This reverts commit r315633.
llvm-svn: 315637
Merge LLVMTargetMachine into TargetMachine.
- There is no in-tree target anymore that just implements TargetMachine
but not LLVMTargetMachine.
- It should still be possible to stub out all the various functions in
case a target does not want to use lib/CodeGen
- This simplifies the code and avoids methods ending up in the wrong
interface.
Differential Revision: https://reviews.llvm.org/D38489
llvm-svn: 315633
WMMA = "Warp Level Matrix Multiply-Accumulate".
These are the new instructions introduced in PTX6.0 and available
on sm_70 GPUs.
Differential Revision: https://reviews.llvm.org/D38645
llvm-svn: 315601
Add profitability checks for modifying counted loops to use the mtctr instruction.
The latency of mtctr is only justified if there are more than 4 comparisons that
will be removed as a result. Usually counted loops are formed relatively early
and before unrolling, so most low trip count loops often don't survive. However
we want to ensure that if they do, we do not mistakenly update them to mtctr loops.
Use CodeMetrics to ensure we are only doing this for small loops with small trip counts.
Differential Revision: https://reviews.llvm.org/D38212
llvm-svn: 315592
Summary:
The interpolation mode workaround ensures that at least one
interpolation mode is enabled in PSInputAddr. It does not also check
PSInputEna on the basis that the user might enable bits in that
depending on run-time state.
However, for amdpal os type, the user does not enable some bits after
compilation based on run-time states; the register values being
generated here are the final ones set in the hardware. Therefore, apply
the workaround to PSInputAddr and PSInputEnable together. (The case
where a bit is set in PSInputAddr but not in PSInputEnable is where the
frontend set up an input arg for a particular interpolation mode, but
nothing uses that input arg. Really we should have an earlier pass that
removes such an arg.)
Reviewers: arsenm, nhaehnle, dstuttard
Subscribers: kzhuravl, wdng, yaxunl, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D37758
llvm-svn: 315591
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
MCObjectStreamer owns its MCCodeEmitter -- this fixes the types to reflect that,
and allows us to remove the last instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315531
- Use HSA metadata streamer directly from AMDGPUAsmPrinter
- Make naming consistent with PAL metadata
Differential Revision: https://reviews.llvm.org/D38746
llvm-svn: 315526
- Move PAL metadata definitions to AMDGPUMetadata
- Make naming consistent with HSA metadata
Differential Revision: https://reviews.llvm.org/D38745
llvm-svn: 315523
- Rename AMDGPUCodeObjectMetadata to AMDGPUMetadata (PAL metadata will be included in this file in the follow up change)
- Rename AMDGPUCodeObjectMetadataStreamer to AMDGPUHSAMetadataStreamer
- Introduce HSAMD namespace
- Other minor name changes in function and test names
llvm-svn: 315522
Summary:
This adds a set of new directives that describe 32-bit x86 prologues.
The directives are limited and do not expose the full complexity of
codeview FPO data. They are merely a convenience for the compiler to
generate more readable assembly so we don't need to generate tons of
labels in CodeGen. If our prologue emission changes in the future, we
can change the set of available directives to suit our needs. These are
modelled after the .seh_ directives, which use a different format that
interacts with exception handling.
The directives are:
.cv_fpo_proc _foo
.cv_fpo_pushreg ebp/ebx/etc
.cv_fpo_setframe ebp/esi/etc
.cv_fpo_stackalloc 200
.cv_fpo_endprologue
.cv_fpo_endproc
.cv_fpo_data _foo
I tried to follow the implementation of ARM EHABI CFI directives by
sinking most directives out of MCStreamer and into X86TargetStreamer.
This helps avoid polluting non-X86 code with WinCOFF specific logic.
I used cdb to confirm that this can show locals in parent CSRs in a few
cases, most importantly the one where we use ESI as a frame pointer,
i.e. the one in http://crbug.com/756153#c28
Once we have cdb integration in debuginfo-tests, we can add integration
tests there.
Reviewers: majnemer, hans
Subscribers: aemerson, mgorny, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D38776
llvm-svn: 315513
Currently we produce a bunch of unnecessary code when emitting the
prologue/epilogue for spills/restores. Namely, if the load from stack
slot/store to stack slot instruction is an X-Form instruction, we will
always produce an LIS/ORI sequence for the stack offset.
Furthermore, we have not exploited the P9 vector D-Form loads/stores for this
purpose.
This patch address both issues.
Specifying the D-Form load as the instruction to use for stack spills/reloads
should be safe because:
1. The stack should be aligned according to the ABI
2. If the stack isn't aligned, PPCRegisterInfo::eliminateFrameIndex() will
check for the offset being a multiple of 16 and will convert it to an
X-Form instruction if it isn't.
Differential Revision : https://reviews.llvm.org/D38758
llvm-svn: 315500
Legalization of fp128 assumes things that we should have asserts for,
so that's another potential improvement.
Differential Revision: https://reviews.llvm.org/D38771
llvm-svn: 315485
The software pipeliner and the packetizer try to break dependence
between the post-increment instruction and the dependent memory
instructions by changing the base register and the offset value.
However, in some cases, the existing logic didn't work properly
and created incorrect offset value.
Patch by Jyotsna Verma.
llvm-svn: 315468
The pipeliner is generating a serial sequence that causes poor
register allocation when a post-increment instruction appears
prior to the use of the post-increment register. This occurs when
there is a circular set of dependences involved with a sequence
of instructions in the same cycle. In this case, there is no
serialization of the parallel semantics that will not cause an
additional register to be allocated.
This patch fixes the problem by changing the instructions so that
the post-increment instruction is used by the subsequent
instruction, which enables the register allocator to make a
better decision and not require another register.
Patch by Brendon Cahoon.
llvm-svn: 315466
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
MCObjectStreamer owns its MCAsmBackend -- this fixes the types to reflect that,
and allows us to remove another instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315410
Rather than using the AdditionalPredicates mechanism to guard
the microMIPS instructions, use the existing predicates to properly
guard those instructions.
This also resolves a case where an instruction pattern was incorrectly
available for microMIPS32R6, which caused a register allocation failure
as the registers specified in the pattern were not available.
Reviewers: nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D38451
llvm-svn: 315362
opt-bisect/optnone disable the AMDGPUUniformAnnotateValues pass.
The heuristic in the custom selector for brcond deferred the
branch uniformity check to the pattern, which would fail.
llvm-svn: 315360
This patch adds a post-linking pass which replaces the function pointer of enqueued
block kernel with a global variable (runtime handle) and adds
runtime-handle attribute to the enqueued block kernel.
In LLVM CodeGen the runtime-handle metadata will be translated to
RuntimeHandle metadata in code object. Runtime allocates a global buffer
for each kernel with RuntimeHandel metadata and saves the kernel address
required for the AQL packet into the buffer. __enqueue_kernel function
in device library knows that the invoke function pointer in the block
literal is actually runtime handle and loads the kernel address from it
and puts it into AQL packet for dispatching.
This cannot be done in FE since FE cannot create a unique global variable
with external linkage across LLVM modules. The global variable with internal
linkage does not work since optimization passes will try to replace loads
of the global variable with its initialization value.
Differential Revision: https://reviews.llvm.org/D38610
llvm-svn: 315352
functions.
This makes the ownership of the resulting MCObjectWriter clear, and allows us
to remove one instance of MCObjectStreamer's bizarre "holding ownership via
someone else's reference" trick.
llvm-svn: 315327
Summary:
The pass to fix function bitcasts generates thunks for functions that
are called directly with a mismatching signature. It was also generating
thunks in cases where the function was address-taken, causing aliasing
problems in otherwise valid cases.
This patch tightens the restrictions for when the pass runs.
Reviewers: sunfish, dschuff
Subscribers: jfb, sbc100, llvm-commits, aheejin
Differential Revision: https://reviews.llvm.org/D38640
llvm-svn: 315326
