The hostname can be very unstable when there are many machines on the
network competing for the same name. Using the hardware UUID makes it
less likely to have collisions or to consider files written by the
current host to be owned by a different one at a later time.
rdar://problem/21512307
llvm-svn: 241005
When the store sequence being combined actually stores the base register, we
should not mark it as killed until the end.
rdar://21504262
llvm-svn: 241003
This is a new version of http://reviews.llvm.org/D10260.
It turned out that when you specify an integer register in inline asm on
x86 you get the register of the required type size back. That means that
X86TargetLowering::getRegForInlineAsmConstraint() has to accept any of
the integer registers and adapt its size to the given target size which
may be any 8/16/32/64 bit sized type. Surprisingly that means given a
constraint of "{ax}" and a type of MVT::F32 we need to return X86::EAX.
This change makes this face explicit, the previous code seemed like
working by accident because there it never returned an error once a
register was found. On the other hand this rewrite allows to actually
return errors for invalid situations like requesting an integer register
for an i128 type.
Related to rdar://21042280
Differential Revision: http://reviews.llvm.org/D10813
llvm-svn: 241002
Set debug location for terminator instruction in loop backedge block
(which is an unconditional jump to loop header). We can't copy debug
location from original backedges, as there can be several of them,
with different debug info locations. So, we follow the approach of
SplitBlockPredecessors, and copy the debug info from first non-PHI
instruction in the header (i.e. destination block).
This is yet another change for PR23837.
llvm-svn: 240999
Summary: This patch fixes the cases of sext/zext constant folding in DAG combiner where constans do not fit 64 bits. The fix simply removes un$
Test Plan: New regression test included.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: RKSimon, llvm-commits
Differential Revision: http://reviews.llvm.org/D10607
llvm-svn: 240991
CMake files and should not be by both build systems and also the targets
were also installed by the CMake build system which they should not be.
The problem was that
- the CMake build of LLVM installs and exports the gtest library
targets. We should not being doing this, these are not part of LLVM.
- the Autoconf/Makefile build of LLVM still had gtest libraries in the
installed LLVMConfig.cmake.
These problems would cause problems for an external project because when
calling llvm_map_components_to_libnames(XXX all) ${XXX} would to contain
LLVM's internal gtest libraries.
llvm-svn: 240981
Avoid listing inclusions (like `!projects/LLVMBuild.txt`) for files
directly underneath `projects/` in `.gitignore`. Instead, change the
`projects/*` exclusion to the more specific `projects/*/`.
llvm-svn: 240973
Make sure to remove the unique lock file, which is what the .lock
symlink points to, if there is a signal while the lock is held. This
will release the lock, since the symlink will point to nothing (already
tested in unit tests). For good measure, also clean up the unique lock
file if there is an error or signal before the lock is acquired.
I will add a clang test.
rdar://problem/21512307
llvm-svn: 240967
This commit implements serialization of the register mask machine
operands. This commit serializes only the call preserved register
masks that are defined by a target, it doesn't serialize arbitrary
register masks.
This commit also extends the TargetRegisterInfo class and TableGen so that
the users of TRI can get the list of all the call preserved register masks and
their names.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10673
llvm-svn: 240966
The expressions we delinearize do not necessarily have to have a SCEVAddRecExpr
at the outermost level. At this moment, the additional flexibility is not
exploited in LLVM itself, but in Polly we will soon soonish use this
functionality. For LLVM, this change should not affect existing functionality
(which is covered by test/Analysis/Delinearization/)
llvm-svn: 240952
This moves the error checking for string tables to getStringTable which returns
an ErrorOr<StringRef>.
This improves error checking, makes it uniform across all string tables and
makes it possible to check them once instead of once per name.
llvm-svn: 240950
It was a fairly broken concept for an ELF only class.
An ELF file can have two symbol tables, but they have exactly the same
format. There is no concept of a dynamic or a static symbol. Storing this
on the iterator also makes us do more work per symbol than necessary. To fetch
a name we would:
* Find if we had a static or a dynamic symbol.
* Look at the corresponding symbol table and find the string table section.
* Look at the string table section to fetch its contents.
* Compute the name as a substring of the string table.
All but the last step can be done per symbol table instead of per symbol. This
is a step in that direction.
llvm-svn: 240939
removing default label in switch as it results.
This is part of earlier commit http://reviews.llvm.org/D1064
Subscribers: llvm-commits
llvm-svn: 240932
Some of the the permissible ARM -mfpu options, which are supported in GCC,
are currently not present in llvm/clang.This patch adds the options:
'neon-fp16', 'vfpv3-fp16', 'vfpv3-d16-fp16', 'vfpv3xd' and 'vfpv3xd-fp16.
These are related to half-precision floating-point and single precision.
Reviewers: rengolin, ranjeet.singh
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10645
llvm-svn: 240930
We had a hack in SDAGBuilder in place to work around this but now we
can avoid that. Call BuildExactSDIV from BuildSDIV so DAGCombiner can
perform this trick automatically.
The added check in DAGCombiner is necessary to prevent exact sdiv by pow2
from regressing as the target-specific pow2 lowering is not aware of
exact bits yet.
This is mostly covered by existing tests. One side effect is that we
get the better lowering for exact vector sdivs now too :)
llvm-svn: 240891
the DW_AT_bit_offset computation, the byte offset is in fact also
endian-dependent as it needs to point to the storage unit containing the
most-significant bit of the the bitfield.
I'm so looking forward to emitting the endian-agnostic DWARF 3 version
instead.
llvm-svn: 240890
Summary:
Previously it (incorrectly) used GPR's.
Patch by Simon Dardis. A couple small corrections by myself.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10567
llvm-svn: 240883
ctypes 0.3 and earlier contains an interface-definig bug:
its ptr_of_raw_address accepts Int64 and not Nativeint. ctypes 0.4
was not released during the 3.6 cycle, and because of that, LLVM 3.6
was released with ctypes 0.3 as a dependency, which now breaks
the build on modern ctypes.
Unbreak.
llvm-svn: 240882
If we are dealing with a pointer induction variable, isInductionPHI
gives back a step value of Stride / size of pointer. However, we might
be indexing with a legal type wider than the pointer width.
Handle this by inserting casts where appropriate instead of crashing.
This fixes PR23954.
llvm-svn: 240877
The PruneEH pass tries to annotate functions as 'noreturn' if it doesn't
see a ReturnInst. However, a naked function containing inline assembly
can contain control flow leaving the function.
This fixes PR23971.
llvm-svn: 240876
This case had been failing on testers that didn't have x86 support. Rather
than XFAIL it on testers without x86 support, I've just assembled it and used
the raw object as the test input.
llvm-svn: 240875
Summary:
The current implementation doesn't always flush all pending labels
beforeemitting data which can result in an incorrectly placed labels in
case when when instruction bundling is enabled and -mc-relax-all flag is
being used. To address this issue, we always flush pending labels before
emitting data.
The change was tested by running PNaCl toolchain trybots with
-mc-relax-all flag set.
Fixes https://code.google.com/p/nativeclient/issues/detail?id=4063
Test Plan: Regression test attached
Reviewers: mseaborn
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D10325
llvm-svn: 240870
Summary:
Ensure that fragments are bundle aligned when instruction bundling
is enabled and the -mc-relax-all flag is set. This is implicitly
assumed by the bundle padding implementation but this assumption
does not hold when custom alignment is being used.
The change was tested by running PNaCl toolchain trybots with
-mc-relax-all flag set.
Fixes https://code.google.com/p/nativeclient/issues/detail?id=4063
Test Plan: Regression test attached
Reviewers: mseaborn
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D10044
llvm-svn: 240869
There are two main reasons why a linked-list makes sense for
`DIEValueList`.
1. We want `DIE` to be on a `BumpPtrAllocator` to improve teardown
efficiency. Making `DIEValueList` array-based would make that much
more complicated.
2. The singly-linked list is fairly memory efficient. The histogram
[1] shows that most DIEs have relatively few values, so we often pay
less than the 2/3-pointer static overhead of a vector. Furthermore,
we don't know ahead of time exactly how many values a `DIE` needs,
so a vector-like scheme will on average over-allocate by ~50%. As
it happens, that's the same memory overhead as the linked list node.
[1]: http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-May/085910.html
The comment I added to the code is a little more succinct, but I think
it's enough to give the idea.
llvm-svn: 240868
Allow callers of `Value::print()` and `Metadata::print()` to pass in a
`ModuleSlotTracker`. This allows them to pay only once for calculating
module-level slots (such as Metadata).
This is related to PR23865, where there was a huge cost for
`MachineFunction::print()`. Although I don't have a *particular* user
in mind for this new code, I have hit big slowdowns before when running
`opt -debug`, and I think this will be useful. Going forward, if
someone hits a big slowdown with `print()` statements, they can create a
`ModuleSlotTracker` and send it through. Similarly, adding support to
`Value::dump()` and `Metadata::dump()` should be trivial.
I added unit tests to be sure the `print()` functions actually behave
the same way with and without the slot tracker.
llvm-svn: 240867
It is possible for a global to be substituted with another global of a
different type or a different kind (i.e. an alias) at IR link time. One
example of this scenario is when a Microsoft ABI vtable is substituted with
an alias referring to a larger vtable containing an RTTI reference.
This will cause the global to be RAUW'd with a possibly bitcasted reference
to the other global. This will of course also affect any references to the
global in bitset metadata.
The right way to handle such metadata is simply to ignore it. This is sound
because the linked module should contain another copy of the bitset entries as
applied to the new global.
llvm-svn: 240866