This extends the RemarkStreamer to allow for other emitters (e.g.
frontends, SIL, etc.) to emit remarks through a common interface.
See changes in llvm/docs/Remarks.rst for motivation and design choices.
Differential Revision: https://reviews.llvm.org/D73676
lrint/llrint are defined as rounding using the current rounding
mode. Numbers that can't be converted raise FE_INVALID and an
implementation defined value is returned. They may also write to
errno.
I believe this means we can use cvtss2si/cvtsd2si or fist to
convert as long as -fno-math-errno is passed on the command line.
Clang will leave them as libcalls if errno is enabled so they
won't become ISD::LRINT/LLRINT in SelectionDAG.
For 64-bit results on a 32-bit target we can't use cvtss2si/cvtsd2si
but we can use fist since it can write to a 64-bit memory location.
Though maybe we could consider using vcvtps2qq/vcvtpd2qq on avx512dq
targets?
gcc also does this optimization.
I think we might be able to do this with STRICT_LRINT/LLRINT as
well, but I've left that for future work.
Differential Revision: https://reviews.llvm.org/D73859
The CATCHPAD node mostly existed to be selected into the EH_RESTORE
instruction, which sets the frame back up when 32-bit Windows exceptions
return to the parent function. However, creating this MachineInstr early
increases the risk that other passes will come along and insert
instructions that use the stack before ESP and EBP are restored. That
happened in PR44697.
Instead of representing these in the instruction stream early, delay it
until PEI. Mark the blocks where this needs to happen as EHPads, but not
funclet entry blocks. Passes after PEI have to be careful not to hoist
instructions that can use stack across frame setup instructions, so this
should be relatively reliable.
Fixes PR44697
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D73752
Add support for Flush in the OMPIRBuilder. This patch also adds changes
to clang to use the OMPIRBuilder when '-fopenmp-enable-irbuilder'
commandline option is used.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D70712
https://reviews.llvm.org/D72312 introduced an infinite loop which involves
DAGCombiner::visitFMA and AMDGPUTargetLowering::performFNegCombine.
fma( a, fneg(b), fneg(c) ) => fneg( fma (a, b, c) ) => fma( a, fneg(b), fneg(c) ) ...
This only breaks with types where 'isFNegFree' returns flase, e.g. v4f32.
Reproducing the issue also needs the attribute 'no-signed-zeros-fp-math',
and no source mods allowed on one of the users of the Op.
This fix makes changes to indicate that it is not free to negate a fma if it
has users with source mods.
Differential Revision: https://reviews.llvm.org/D73939
This time with correct types for the data result from the SUB.
Original commit message:
Our normal lowering for ISD::SETCC uses X86ISD::SUB to enable
CSE unless the RHS is 0. optimizeCompareInstr called by the peephole
pass can turn subs with unused results into cmps to clean this up.
This commit makes other places that create X86ISD::CMP have the
same behavior.
Summary:
It can be useful to tune the default inline threshold without overriding other inlining thresholds (e.g. in code compiled for size).
The existing `-inline-threshold` flag overrides other thresholds, so it is insufficient in codebases where there is a mix of code compiled for size and speed.
Patch by Michael Holman <michael.holman@microsoft.com>
Reviewers: eraman, tejohnson
Reviewed By: tejohnson
Subscribers: tejohnson, mtrofin, davidxl, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73217
shouldOptimizeForSize is showing up in a profile, spending around 10%
of the pass time in one function. This should probably not be so slow,
but the much cheaper attribute check should be done first anyway.
Prepare to accurately track the future denormal-fp-math attribute
changes. The way to actually set these separately is not wired in yet.
This is just a mechanical change, and mostly still assumes the input
and output mode match. This should be refined for some cases. For
example, fcanonicalize lowering should use the flushing variant if
either input or output flushing is enabled
The usage of the Imm out argument from SelectSMRDOffset is pretty
confusing. Stop trying to reject CI immediates in the case where the
offset field can be used. It's not an illegal way to encode the
immediate, so just prefer the better encoding pattern with
AddedComplexity.
We probably don't even really need the different opcodes for the
different offset types anymore, but that will be more work to cleanup.
The SMRD non-buffer load patterns could also use a cleanup to be done
separately.
Summary:
Add a debug check for frequency queries for unknown blocks (typically blocks
that are created after BFI is computed but their frequencies are not
communicated to BFI.)
This is useful for detecting and debugging missed BFI updates.
This is debug build only and disabled behind a flag.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73920
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
Similar to D73680 (AArch64 BTI).
A local linkage function whose address is not taken does not need ENDBR32/ENDBR64. Placing the patch label after ENDBR32/ENDBR64 has the advantage that code does not need to differentiate whether the function has an initial ENDBR.
Also, add 32-bit tests and test that .cfi_startproc is at the function
entry. The line information has a general implementation and is tested
by AArch64/patchable-function-entry-empty.mir
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D73760
Linux commit
1cf5b23988 (diff-289313b9fec99c6f0acfea19d9cfd949)
uses "#pragma clang attribute push (__attribute__((preserve_access_index)),
apply_to = record)"
to apply CO-RE relocations to all records including the following pattern:
#pragma clang attribute push (__attribute__((preserve_access_index)), apply_to = record)
typedef struct {
int a;
} __t;
#pragma clang attribute pop
int test(__t *arg) { return arg->a; }
The current approach to use struct/union type in the relocation record will
result in an anonymous struct, which make later type matching difficult
in bpf loader. In fact, current BPF backend will fail the above program
with assertion:
clang: ../lib/Target/BPF/BPFAbstractMemberAccess.cpp:796: ...
Assertion `TypeName.size()' failed.
clang will change to use the type of the base of the member access
which will preserve the typedef modifier for the
preserve_{struct,union}_access_index intrinsics in the above example.
Here we adjust BPF backend to accept that the debuginfo
type metadata may be 'typedef' and handle them properly.
Differential Revision: https://reviews.llvm.org/D73902
and follow-ups.
This reverts commit 1ced28cbe75ff81f35ac2c71e941041eb3afcd00.
This reverts commit 4f281f047457ce3f1870a93253476222314f420b.
This reverts commit 552a8fe12bd1822f48dda2e9e8728a179f82d356.
The test fails on non-Linux.
This patch reverts part of r362750 / D62650, which stopped
LiveDebugVariables from trimming leading variable location ranges down
to only covering those instructions that are in scope. I've observed some
circumstances where the number of DBG_VALUEs in a function can be
amplified in an un-necessary way, to cover more instructions that are
out of scope, leading to very slow compile times. Trimming the range
of instructions that the variables cover solves the slow compile times.
The specific problem that r362750 tries to fix is addressed by the
assignment to RStart that I've added. Any variable location that begins
at the first instruction of a block will now be considered to begin at the
start of the block. While these sound the same, the have different
SlotIndexes, and the register allocator may shoehorn additional
instructions in between the two. The test added in the past
(wrong_debug_loc_after_regalloc.ll) still works with this modification.
live-debug-variables.ll has a range trimmed to not cover the prologue of
the function, while dbg-addr-dse.ll has a DBG_VALUE sink past one
instruction with no DebugLoc, which is expected behaviour.
Differential Revision: https://reviews.llvm.org/D73691
Summary:
After following Simon's suggestion about additional testing posted at
https://reviews.llvm.org/D73906, I found several more places that
need to be updated.
Reviewers: simon_tatham, dmgreen, ostannard, eli.friedman
Reviewed By: simon_tatham
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73963
