IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
llvm-svn: 309911
Summary:
This exposes LTO's Conf.SampleProfile as a command line option
(-lto-sample-profile-file) for testing via the llvm-lto2 utility.
Reviewers: pcc, danielcdh
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D36030
llvm-svn: 309456
Summary:
ELF linkers generate __start_<secname> and __stop_<secname> symbols
when there is a value in a section <secname> where the name is a valid
C identifier. If dead stripping determines that the values declared
in section <secname> are dead, and we then internalize (and delete)
such a symbol, programs that reference the corresponding start and end
section symbols will get undefined reference linking errors.
To fix this, add the section name to the IRSymtab entry when a symbol is
defined in a specific section. Then use this in the gold-plugin to mark
the symbol as external and visible from outside the summary when the
section name is a valid C identifier.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D35639
llvm-svn: 309009
error message
CMakeFiles/llvm-lto2.dir/llvm-lto2.cpp.o: In function `dumpSymtab(int, char**)':
llvm-lto2.cpp:(.text._ZL10dumpSymtabiPPc+0x238): undefined reference to `llvm::getBitcodeFileContents(llvm::MemoryBufferRef)'
collect2: error: ld returned 1 exit status
llvm-svn: 306507
procedural optimizations to prevent dropping symbols and allow the linker
to process re-directs.
PR33145: --wrap doesn't work with lto.
Differential Revision: https://reviews.llvm.org/D33621
llvm-svn: 304719
Summary:
As we teach Clang to use ThinkLTO + new PM, it's good for the users to
inject through Config, instead of setting a flag in the LTOBackend
library. Move the flag to llvm-lto2.
As it moves to llvm-lto2, a new name -use-new-pm seems simpler and as
clear.
Reviewers: davide, tejohnson
Subscribers: mehdi_amini, Prazek, inglorion, eraman, chandlerc, llvm-commits
Differential Revision: https://reviews.llvm.org/D33799
llvm-svn: 304492
Start using it in LLD to avoid needing to read bitcode again just to get the
target triple, and in llvm-lto2 to avoid printing symbol table information
that is inappropriate for the target.
Differential Revision: https://reviews.llvm.org/D32038
llvm-svn: 300300
Summary:
The linker needs to be able to determine whether a symbol is text or data to
handle the case of a common being overridden by a strong definition in an
archive. If the archive contains a text member of the same name as the common,
that function is discarded. However, if the archive contains a data member of
the same name, that strong definition overrides the common. This is a behavior
of ld.bfd, which the Qualcomm linker also supports in LTO.
Here's a test case to illustrate:
####
cat > 1.c << \!
int blah;
!
cat > 2.c << \!
int blah() {
return 0;
}
!
cat > 3.c << \!
int blah = 20;
!
clang -c 1.c
clang -c 2.c
clang -c 3.c
ar cr lib.a 2.o 3.o
ld 1.o lib.a -t
####
The correct output is:
1.o
(lib.a)3.o
Thanks to Shankar Easwaran and Hemant Kulkarni for the test case!
Reviewers: mehdi_amini, rafael, pcc, davide
Reviewed By: pcc
Subscribers: davide, llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D31901
llvm-svn: 300205
Move LTO::run() to a "run" subcommand so that we can introduce new subcommands
for testing different parts of the LTO implementation.
This doesn't use llvm::cl subcommands because it doesn't appear to be currently
possible to pass an argument not associated with a subcommand to a subcommand
(e.g. -lto-use-new-pm, -mcpu=yonah).
Differential Revision: https://reviews.llvm.org/D31410
llvm-svn: 299967
After the call to sys::fs::exists succeeds, indicating a cache hit, we call
AddFile and the client will open the file using the supplied path. If the
client is using cache pruning, there is a potential race between the pruner
and the client. To avoid this, change the caching API so that it provides
a MemoryBuffer to the client, and have clients use that MemoryBuffer where
possible.
This scheme won't work with the gold plugin because the plugin API expects a
file path. So we have the gold plugin use the buffer identifier as a path and
live with the race for now. (Note that the gold plugin isn't actually affected
by the problem at the moment because it doesn't support cache pruning.)
This effectively reverts r279883 modulo the change to use the existing path
in the gold plugin.
Differential Revision: https://reviews.llvm.org/D31063
llvm-svn: 298020
Summary:
This test was missing the target triple.
Once I fixed that, the case with the invalid character error stopped
returning 1 from llvm-lto2 and the test reported a failure. Fixed by
adding the missing return from llvm-lto2. Apparently we were failing
when we eventually tried to get the target.
Reviewers: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30585
llvm-svn: 297173
Summary:
Add a field to LTO::Config, CGFileType, to select the file type to emit (object
or assembly). This is useful for testing and to implement -save-temps.
Reviewers: tejohnson, mehdi_amini, pcc
Reviewed By: mehdi_amini
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D29475
llvm-svn: 295226
Most importantly, we need to hash the relocation model, otherwise we can
end up trying to link non-PIC object files into PIEs or DSOs.
Differential Revision: https://reviews.llvm.org/D27556
llvm-svn: 289024
Maintain the command line resolutions as a map to a list of resolutions
rather than a single resolution, and apply the resolutions in the order
observed. This is not only simpler but allows us to test the scenario where
the two symbols have different resolutions.
Differential Revision: https://reviews.llvm.org/D27285
llvm-svn: 288288
llvm-lto2.cpp has the following include chain:
llvm/LTO/Caching.h
llvm/LTO/LTO.h
llvm/CodeGen/Analysis.h
llvm/IR/CallSite.h
llvm/IR/Attributes.h
llvm/IR/Attributes.gen
This means llvm-lto2 needs to depend on intrinsics_gen.
llvm-svn: 287434
Summary:
There is no point to importing at -O0, since we won't inline. We should
also disable other cross-module optimizations.
(Plan to backport this fix to the 3.9 branch to fix PR30774)
Reviewers: pcc
Subscribers: johanengelen, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25918
llvm-svn: 285648
Summary:
Changes default backend parallelism from thread::hardware_concurrency to
the new llvm::heavyweight_hardware_concurrency, which for X86 Linux
defaults to the number of physical cores (and will fall back to
thread::hardware_concurrency otherwise). This avoid oversubscribing
the physical cores using hyperthreading.
Reviewers: mehdi_amini, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25775
llvm-svn: 284618
Module inline asm was always being linked/concatenated
when running the IRLinker. This is correct for full LTO but not when
we are importing for ThinLTO, as it can result in multiply defined
symbols when the module asm defines a global symbol.
In order to test with llvm-lto2, I had to work around PR30396,
where a symbol that is defined in module assembly but defined in the
LLVM IR appears twice. Added workaround to llvm-lto2 with a FIXME.
Fixes PR30610.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25359
llvm-svn: 284030
The NativeObjectOutput class has a design problem: it mixes up the caching
policy with the interface for output streams, which makes the client-side
code hard to follow and would for example make it harder to replace the
cache implementation in an arbitrary client.
This change separates the two aspects by moving the caching policy
to a separate field in Config, replacing NativeObjectOutput with a
NativeObjectStream class which only deals with streams and does not need to
be overridden by most clients and introducing an AddFile callback for adding
files (e.g. from the cache) to the link.
Differential Revision: https://reviews.llvm.org/D24622
llvm-svn: 282299
Summary:
Have the cache pass back the path to the cache entry when it
is ready to be loaded, instead of a buffer.
For gold-plugin we can simply pass this file back to gold directly,
which avoids expensive writing of a separate tmp file. Ensure
the cache entry is not deleted on cleanup by adjusting the setting
of the IsTemporary flags.
Moved the loading of the buffer into llvm-lto2 to maintain current
behavior.
Reviewers: mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23946
llvm-svn: 279883
Add the ability to plug a cache on the LTO API.
I tried to write such that a linker implementation can
control the cache backend. This is intrusive and I'm
not totally happy with it, but I can't figure out a
better design right now.
Differential Revision: https://reviews.llvm.org/D23599
llvm-svn: 279576
Summary:
Start bringing llvm-lto2 to a level where we can test the LTO API
a bit deeper.
Reviewers: tejohnson
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23681
llvm-svn: 279349
Summary:
It does not play well with directories (end up with a bunch of hidden
files).
Also, do not strip the 0 suffix for the first task, especially since
0 can be used by ThinLTO as well now.
Reviewers: tejohnson
Subscribers: mehdi_amini, pcc, llvm-commits
Differential Revision: https://reviews.llvm.org/D23612
llvm-svn: 279014
Summary:
While NFC for now, this will allow more flexibility on the client side
to hold state necessary to back up the stream.
Also when adding caching, this class will grow in complexity.
Note I blindly modified the gold-plugin as I can't compile it.
Reviewers: tejohnson
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D23542
llvm-svn: 278907
This restores commit r278330, with fixes for a few bot failures:
- Fix a late change I had made to the save temps output file that I
missed due to existing files sitting on my disk
- Fix a bunch of Windows bot failures with "ambiguous call to overloaded
function" due to confusion between llvm::make_unique vs
std::make_unique (preface the new make_unique calls with "llvm::")
- Attempt to fix a modules bot failure by adding a missing include
to LTO/Config.h.
Original change:
Resolution-based LTO API.
Summary:
This introduces a resolution-based LTO API. The main advantage of this API over
existing APIs is that it allows the linker to supply a resolution for each
symbol in each object, rather than the combined object as a whole. This will
become increasingly important for use cases such as ThinLTO which require us
to process symbol resolutions in a more complicated way than just adjusting
linkage.
Patch by Peter Collingbourne.
Reviewers: rafael, tejohnson, mehdi_amini
Subscribers: lhames, tejohnson, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D20268
llvm-svn: 278338
This reverts commit r278330.
I made a change to the save temps output that is causing issues with the
bots. Didn't realize this because I had older output files sitting on
disk in my test output directory.
llvm-svn: 278331
Summary:
This introduces a resolution-based LTO API. The main advantage of this API over
existing APIs is that it allows the linker to supply a resolution for each
symbol in each object, rather than the combined object as a whole. This will
become increasingly important for use cases such as ThinLTO which require us
to process symbol resolutions in a more complicated way than just adjusting
linkage.
Patch by Peter Collingbourne.
Reviewers: rafael, tejohnson, mehdi_amini
Subscribers: lhames, tejohnson, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D20268
Address review comments
llvm-svn: 278330
