Summary:
This commit adds comments on how the AMDPAL OS type overloads the
existing AMDGPU_ calling conventions used by Mesa, and adds a couple of
new ones.
Reviewers: arsenm, nhaehnle, dstuttard
Subscribers: mehdi_amini, kzhuravl, wdng, yaxunl, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D37752
llvm-svn: 314502
Summary:
Added support for scratch (including spilling) for OS type amdpal:
generates code to set up the scratch descriptor if it is needed.
With amdpal, the scratch resource descriptor is loaded from offset 0 of
the global information table. The low 32 bits of the address of the
global information table is passed in s0.
Added amdgpu-git-ptr-high function attribute to hard-wire the high 32
bits of the address of the global information table. If the function
attribute is not specified, or is 0xffffffff, then the backend generates
code to use the high 32 bits of pc.
The documentation for the AMDPAL ABI will be added in a later commit.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye
Differential Revision: https://reviews.llvm.org/D37483
llvm-svn: 314501
Summary:
This operating system type represents the AMDGPU PAL runtime, and will
be required by the AMDGPU backend in order to generate correct code for
this runtime.
Currently it generates the same code as not specifying an OS at all.
That will change in future commits.
Patch from Tim Corringham.
Subscribers: arsenm, nhaehnle
Differential Revision: https://reviews.llvm.org/D37380
llvm-svn: 314500
This patch introduces 3 helper functions: error(), warn() and note() to
make printing during verification more consistent. When supported, the
respective prefixes are printed in color using the same color scheme as
clang.
Differential revision: https://reviews.llvm.org/D38368
llvm-svn: 314498
Fix nested callseq* nodes by moving callseq_start after the
arguments calculation to temporary registers, so that callseq* nodes
in resulting DAG are linear.
Differential Revision: https://reviews.llvm.org/D37328
llvm-svn: 314497
Allow the proper recognition of Enum values and global variables inside ms inline-asm memory / immediate expressions, as they require some additional overhead and treated incorrect if doesn't early recognized.
supersedes D33278, D35774
Differential Revision: https://reviews.llvm.org/D37412
llvm-svn: 314493
This commit yanks out the repeated sections of code in pruneCandidates into
two lambdas: ShouldSkipCandidate and Prune. This simplifies the logic in
pruneCandidates significantly, and reduces the chance of introducing bugs by
folding all of the shared logic into one place.
llvm-svn: 314475
Summary:
X86ISelDAGToDAG tries to analyze ANDs compared with 0 to optimize to narrower immediates using subregisters.
I don't think we should be optimizing to 16-bit test instructions. It goes against our normal behavior of promoting i16 operations to i32. It only saves one byte due to the need to add a 0x66 prefix. I think it would also be subject to a length changing prefix penalty in the decoders on Intel CPUs.
Reviewers: RKSimon, zvi, spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38273
llvm-svn: 314474
LR is an untypical callee saved register in that it is restored into a
different register (PC) and thus does not live-out of the return block.
This case requires the `Restored` flag in CalleeSavedInfo to be cleared.
This fixes a number of cases where this wasn't handled correctly yet.
llvm-svn: 314471
The expensive-checks build bot found a problem with the r314428 commit:
if CC is live after a ATOMIC_CMP_SWAPW instruction, it needs to be
marked as live-in to the block after the loop the pseudo gets expanded
to. This actually fixes a code-gen bug as well, since if the CC isn't
live, the CR and JLH are merged to a CRJLH which doesn't actually set
the condition code any more.
llvm-svn: 314465
If we have BWI, we can truncate in a much simpler way by using vpmovwb. This even works without VLX by using the wider zmm->ymm truncate with a subvector extract.
Differential Revision: https://reviews.llvm.org/D38375
llvm-svn: 314457
In setupEntryBlockAndCallSites in CodeGen/SjLjEHPrepare.cpp,
we fetch and store the actual frame pointer, but on return via
the longjmp intrinsic, it always was restored into the r7 variable.
On windows, the frame pointer should be restored into r11 instead of r7.
On Darwin (where sjlj exception handling is used by default), the frame
pointer is always r7, both in arm and thumb mode, and likewise, on
windows, the frame pointer always is r11.
On linux however, if sjlj exception handling is enabled (which it isn't
by default), libcxxabi and the user code can be built in differing modes
using different registers as frame pointer. Therefore, when restoring
registers on a platform where we don't always use the same register
depending on code mode, restore both r7 and r11.
Differential Revision: https://reviews.llvm.org/D38253
llvm-svn: 314451
We aren't do any in register extends here so we should be able to just the target independent nodes directly and allow them to be lowered as necessary.
llvm-svn: 314447
This patch implements the dwarfdump option --find=<name>. This option
looks for a DIE in the accelerator tables and dumps it if found. This
initial patch only adds support for .apple_names to keep the review
small, adding the other sections and pubnames support should be
trivial though.
Differential Revision: https://reviews.llvm.org/D38282
llvm-svn: 314439
JumpThreading now preserves dominance and lazy value information across the
entire pass. The pass manager is also informed of this preservation with
the goal of DT and LVI being recalculated fewer times overall during
compilation.
This change prepares JumpThreading for enhanced opportunities; particularly
those across loop boundaries.
Patch by: Brian Rzycki <b.rzycki@samsung.com>,
Sebastian Pop <s.pop@samsung.com>
Differential revision: https://reviews.llvm.org/D37528
llvm-svn: 314435
Summary: If we have BWI instructions we can widen to v32i16 to do the multiply instead of splitting.
Reviewers: RKSimon, spatel, zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38305
llvm-svn: 314432
Summary:
Lowering never creates X86ISD::UMUL for 8-bit types. X86ISD::UMUL8 is used instead. If X86ISD::UMUL 8-bit were ever used it would crash.
DAGCombiner replaces UMUL_LOHI/SMUL_LOHI with a wider MUL and a shift if the type twice as wide is legal. So we should never see i8 UMUL_LOHI/SMUL_LOHI. In fact I think there was a bug in part of the i8 code. Similar is true for i16 though without the bug.
Reviewers: RKSimon, spatel, zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38276
llvm-svn: 314430
Previously we were using one of the subvector indices twice. The included test case causes an assert without this change.
Thanks to Simon Pilgrim for catching this.
llvm-svn: 314429
The SystemZ compare-and-swap instructions already provide the "success"
indication via a condition-code value, so the default expansion of those
operations generates an unnecessary extra comparsion.
llvm-svn: 314428
This patch adds a check to the DWARF verifier to detect CUs without a
unit DIE.
Differential revision: https://reviews.llvm.org/D38363
llvm-svn: 314426
This patch disables codegen support for branch likely instructions to
address a potential bug. These branches were unselectable as
they had the same patterns as the normal branches but came after them
when ISel was concerned.
The branch likely instructions were marked as having no delay
slots when they have annulling delay slots. The delay slot filler
does not currently handle annulling delay slot branches, so this
would lead to wrong codegen if these branches were generated.
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D38169
llvm-svn: 314421
Summary:
A DBG_VALUE that is referring to a physical register is
valid up until the next def of the register, or the end
of the basic block that it belongs to.
LiveDebugVariables is computing live intervals (slot index
ranges) for DBG_VALUE instructions, before regalloc, in order
to be able to re-insert DBG_VALUE instructions again after
regalloc. When the DBG_VALUE is mapping a variable to a
physical register we do not need to compute the range. We
should simply re-insert the DBG_VALUE at the start position.
The problem that was found, resulting in this patch, was a
situation when the DBG_VALUE was the last real use of the
physical register. The computeIntervals/extendDef methods
extended the range to cover the whole basic block, even though
the physical register very well could be allocated to some
virtual register inside the basic block. So the extended
range could not be trusted.
This patch is a preparation for https://reviews.llvm.org/D38229,
where the goal is to insert DBG_VALUE after each new definition
of a variable, even if the virtual registers that the variable
was connected to has been coalesced into using the same physical
register (e.g. due to two address instructions). For more info
see https://bugs.llvm.org/show_bug.cgi?id=34545
Reviewers: aprantl, rnk, echristo
Reviewed By: aprantl
Subscribers: Ka-Ka, llvm-commits
Differential Revision: https://reviews.llvm.org/D38140
llvm-svn: 314414
Summary:
This allows sharing the lattice value code between LVI and SCCP (D36656).
It also adds a `satisfiesPredicate` function, used by D36656.
Reviewers: davide, sanjoy, efriedma
Reviewed By: sanjoy
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D37591
llvm-svn: 314411
MS allows the following size directives: float/double and long as synonymous to dword/qword and dword, respectively.
Differential Revision: https://reviews.llvm.org/D37190
llvm-svn: 314410
It's currently quite difficult to test passes like branch relaxation, which
requires branches with large displacement to be generated. The .space assembler
directive makes it easy to create arbitrarily large basic blocks, but
getInlineAsmLength is not able to parse it and so the size of the block is not
correctly estimated. Other backends (AArch64, AMDGPU) introduce options just
for testing that artificially restrict the ranges of branch instructions (e.g.
aarch64-tbz-offset-bits). Although parsing a single form of the .space
directive feels inelegant, it does allow a more direct testing approach.
This patch adapts the .space parsing code from
Mips16InstrInfo::getInlineAsmLength and removes it now the extra functionality
is provided by the base implementation. I want to move this functionality to
the generic getInlineAsmLength as 1) I need the same for RISC-V, and 2) I feel
other backends will benefit from more direct testing of large branch
displacements.
Differential Revision: https://reviews.llvm.org/D37798
llvm-svn: 314393
This is a follow-on of D37211.
D37211 eliminates a compare instruction if two conditional branches can be made based on the one compare instruction, e.g.
if (a == 0) { ... }
else if (a < 0) { ... }
This patch extends this optimization to support partially redundant cases, which often happen in while loops.
For example, one compare instruction is moved from the loop body into the preheader by this optimization in the following example.
do {
if (a == 0) dummy1();
a = func(a);
} while (a > 0);
Differential Revision: https://reviews.llvm.org/D38236
llvm-svn: 314390
%lo(), %hi(), and %pcrel_hi() are supported and test cases have been added to
ensure the appropriate fixups and relocations are generated. I've added an
instruction format field which is used in RISCVMCCodeEmitter to, for
instance, tell whether it should emit a lo12_i fixup or a lo12_s fixup
(RISC-V has two 12-bit immediate encodings depending on the instruction
type).
Differential Revision: https://reviews.llvm.org/D23568
llvm-svn: 314389
Summary:
If we have a non-allocated register, we allow us to try recoloring of an
already allocated and "Done" register, even if they are of the same
register class, if the non-allocated register has at least one tied def
and the allocated one has none.
It should be easier to recolor the non-tied register than the tied one, so
it might be an improvement even if they use the same regclasses.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D38309
llvm-svn: 314388
Without this, we could end up trying to get the Nth (0-indexed) element
from a subvector of size N.
Differential Revision: https://reviews.llvm.org/D37880
llvm-svn: 314380
This patch adds new insn, "reg = be16/be32/be64 reg",
for bswap to little endian for big-endian target (bpfeb).
It also adds new insn for negation "reg = -reg".
Currently, for source code, e.g.,
b = -a
LLVM still prefers to generate:
b = 0 - a
But "reg = -reg" format can be used in assembly code.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 314376
Summary:
And now that we no longer have to explicitly free() the Loop instances, we can
(with more ease) use the destructor of LoopBase to do what LoopBase::clear() was
doing.
Reviewers: chandlerc
Subscribers: mehdi_amini, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D38201
llvm-svn: 314375
If we do not initialize Prefix here, Prefix.data() returns a nullptr.
Later, it is passed to memcpy. memcpy's behavior is undefined if src (or
dst) is a nullptr even if a given size is 0. That's why this code
triggered UBsan.
llvm-svn: 314368
This patch produces a crash and hexagon_vector_loop_carried_reuse_constant.ll test fails on Windows (llvm-clang-x86_64-expensive-checks-win build bot).
llvm-svn: 314361
This reverts r314017 and similar code added in later commits. It seems to not work for pointer compares and is causing a bot failure for the last several days.
llvm-svn: 314360
