There was an alias between 'simplifycfg' and 'simplify-cfg' in the
PassRegistry. That was the original reason for this patch, which
effectively removes the alias.
This patch also replaces all occurrances of 'simplify-cfg'
by 'simplifycfg'. Reason for choosing that form for the name is
that it matches the DEBUG_TYPE for the pass, and the legacy PM name
and also how it is spelled out in other passes such as
'loop-simplifycfg', and in other options such as
'simplifycfg-merge-cond-stores'.
I for some reason the name should be changed to 'simplify-cfg' in
the future, then I think such a renaming should be more widely done
and not only impacting the PassRegistry.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D105627
C++23 will make these conversions ambiguous - so fix them to make the
codebase forward-compatible with C++23 (& a follow-up change I've made
will make this ambiguous/invalid even in <C++23 so we don't regress
this & it generally improves the code anyway)
This commit also makes some slight changes to the scheduling model for AMDGPU to set the RetireOOO flag for all scheduling classes.
This flag is only used by llvm-mca and allows instructions to retire out of order.
See the differential link below for a deeper explanation of everything.
Differential Revision: https://reviews.llvm.org/D104730
Part of https://lists.llvm.org/pipermail/llvm-dev/2021-July/151622.html
"Binary utilities: switch command line parsing from llvm::cl to OptTable"
Users should generally observe no difference as long as they only use intended
option forms. Behavior changes:
* `-t=d` is removed. Use `-t d` instead.
* `--demangle=0` cannot be used. Omit the option or use `--no-demangle` instead.
* `--help-list` is removed. This is a `cl::` specific option.
Note:
* `-t` diagnostic gets improved.
* This patch avoids cl::opt collision if we decide to support multiplexing for binary utilities
* One-dash long options are still supported.
* The `-s` collision (`-s segment section` for Mach-O) is unfortunate. `-s` means `--print-armap` in GNU nm.
* This patch removes the last `cl::multi_val` use case from the `llvm/lib/Support/CommandLine.cpp` library
`-M` (`--print-armap`), `-U` (`--defined-only`), and `-W` (`--no-weak`)
are now deprecated. They could conflict with future GNU nm options.
(--print-armap has an existing alias -s, so GNU will unlikely add a new one.
--no-weak (not in GNU nm) is rarely used anyway.)
`--just-symbol-name` is now deprecated in favor of
`--format=just-symbols` and `-j`.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D105330
Some behavior changes:
* `-t=d` is removed. Use `-t d` instead.
* one-dash long options like `-all` are supported. Use `--all` instead.
* `--all=0` or `--all=false` cannot be used. (Note: `--all` is silently ignored anyway)
* `--help-list` is removed. This is a `cl::` specific option.
Nobody is likely leveraging any of the above.
Advantages:
* `-t` diagnostic gets improved.
* in the absence of `HideUnrelatedOptions`, `--help` will not list unrelated options if linking against libLLVM-13git.so or linker GC is not used.
* Decrease the probability of cl::opt collision if we do decide to support multiplexing
Note: because the tool is so simple, used more for forensics instead of a building
tool, and its long options are unlikely used in one-dash form, I just drop the
one-dash form in this patch.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D104889
Summary: The patch adds the StringTable dumping to
llvm-readobj. Currently only XCOFF is supported.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D104613
GNU and Apple `strip` implementations seems to support grouped options.
Enable the support for grouped options introduced in
https://reviews.llvm.org/D83639 for `llvm-strip` invocations.
Includes test that checks that both the grouped and non grouped
invocations produces the same result.
Reviewed By: alexander-shaposhnikov, MaskRay
Differential Revision: https://reviews.llvm.org/D105249
Based on the discussion in PR50922, minor changes have been done to properly
output a valid JSON. Removed "not implemented" keys.
Differential Revision: https://reviews.llvm.org/D105064
This is a first step towards consistently using the term 'executor' for the
process that executes JIT'd code. I've opted for 'executor' as the preferred
term over 'target' as target is already heavily overloaded ("the target
machine for the executor" is much clearer than "the target machine for the
target").
By using stable_sort.
Added a test case which previously failed when expensive checks were
enabled.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D105240
This is an ELF specific option which isn't supported for Windows/MinGW
targets, even if the MinGW linker otherwise uses an ld.bfd like linker
interface.
Differential Revision: https://reviews.llvm.org/D105148
The load command is currently specific to arm64 and holds information
for instruction rewriting, e.g. converting a GOT load to an ADR to
compute a local address.
(On ELF the information is usually conveyed by relocations, e.g.
R_X86_64_REX_GOTPCRELX, R_PPC64_TOC16_HA)
Reviewed By: alexander-shaposhnikov
Differential Revision: https://reviews.llvm.org/D104968
llvm-readobj is an internal testing tool for binary formats. Its output and
command line options do not need to be stable. It isn't supposed to be part of a
build process.
llvm-readelf was created as a user-facing utility and its interface intends to
be compatible with GNU readelf (unless there are good reasons not to).
The two tools have mostly compatible options. -s and -t are noticeable
exceptions due to history. I think the cost of keeping the inconsistency
overweighs the little history-compatible benefit and hinders transition from
cl::opt to OptTable, so let's change it.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D105055
An ARM64_RELOC_ADDEND relocation reuses the symbol field for the addend value.
We should pass through such relocations.
Reviewed By: alexander-shaposhnikov
Differential Revision: https://reviews.llvm.org/D104967
This reverts commit c94cf97b53566a26245c54ea0c41b0dc83daf8a0
since it appears to have broken linaro-clang-armv7-quick build bot
and needs further investigation.
The patch reuses the common code to print memory operand addresses as
instruction comments. This helps to align the comments and enables using
target-specific comment markers when `evaluateMemoryOperandAddress()` is
implemented for them.
Differential Revision: https://reviews.llvm.org/D104861
For now, the source variable locations are printed at about the same
space as the comments for disassembled code, which can make some ranges
for variables disappear if a line contains comments, for example:
┠─ bar = W1
0: add x0, x2, #2, lsl #12 // =8192┃
4: add z31.d, z31.d, #65280 // =0xff00
8: nop ┻
The patch shifts the report a bit to allow printing comments up to
approximately 16 characters without interferences.
Differential Revision: https://reviews.llvm.org/D104700
LLVM disassembler can generate comments for disassembled instructions.
The patch enables printing these comments for 'llvm-objdump -d'.
Differential Revision: https://reviews.llvm.org/D104699
When the default target arch isn't one that is supported as a
windows target, we want to set a suitable architecture (so that
Clang tests that run plain 'llvm-rc' succeed checks for e.g.
"#ifdef _WIN32" even for llvm builds that default to e.g. ppc64).
But if the default target architecture is usable, don't rewrite it.
(Rewriting it, by e.g. "T.setArch(T.getArch())", normalizes the
spelling of the architecture, e.g. changing i686 to i386. Such a
change can make clang unable to find the right sysroot.)
This can't, unfortunately, practically be tested very well because
it is entirely dependent on the default triple of the llvm build.
Differential Revision: https://reviews.llvm.org/D104589
... even on targets preferring RELA. The section is only consumed by ld.lld
which can handle REL.
Follow-up to D104080 as I explained in the review. There are two advantages:
* The D104080 code only handles RELA, so arm/i386/mips32 etc may warn for -fprofile-use=/-fprofile-sample-use= usage.
* Decrease object file size for RELA targets
While here, change the relocation to relocate weights, instead of 0,1,2,3,..
I failed to catch the issue during review.
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
We don't want to start updating tests to use opaque pointers until we're
close to the opaque pointer transition. However, before the transition
we want to run tests as if pointers are opaque pointers to see if there
are any crashes.
At some point when we have a flag to only create opaque pointers in the
bitcode and textual IR readers, and when we have fixed all places that
try to read a pointee type, this flag will be useless. However, until
then, this can help us find issues more easily.
Since the cl::opt is read into LLVMContext, we need to make sure
LLVMContext is created after cl::ParseCommandLineOptions().
Previously ValueEnumerator would visit the value types of global values
via the pointer type, but with opaque pointers we have to manually visit
the value type.
Reviewed By: nikic, dexonsmith
Differential Revision: https://reviews.llvm.org/D103503
Currently when .llvm.call-graph-profile is created by llvm it explicitly encodes the symbol indices. This section is basically a black box for post processing tools. For example, if we run strip -s on the object files the symbol table changes, but indices in that section do not. In non-visible behavior indices point to wrong symbols. The visible behavior indices point outside of Symbol table: "invalid symbol index".
This patch changes the format by using R_*_NONE relocations to indicate the from/to symbols. The Frequency (Weight) will still be in the .llvm.call-graph-profile, but symbol information will be in relocation section. In LLD information from both sections is used to reconstruct call graph profile. Relocations themselves will never be applied.
With this approach post processing tools that handle relocations correctly work for this section also. Tools can add/remove symbols and as long as they handle relocation sections with this approach information stays correct.
Doing a quick experiment with clang-13.
The size went up from 107KB to 322KB, aggregate of all the input sections. Size of clang-13 binary is ~118MB. For users of -fprofile-use/-fprofile-sample-use the size of object files will go up slightly, it will not impact final binary size.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D104080
Change --max-timeline-cycles=0 to mean no limit on the number of cycles.
Use this in AMDGPU tests to show all instructions in the timeline view
instead of having it arbitrarily truncated.
Differential Revision: https://reviews.llvm.org/D104846
A ConstantStruct is renamed when the LLVM context sees a new one. This
makes global variable initializers appear different when they aren't.
Instead, check the ConstantStruct for equivalence.
Differential Revision: https://reviews.llvm.org/D104734
This is a similarity visualization tool that accepts a Module and
passes it to the IRSimilarityIdentifier. The resulting SimilarityGroups
are output in a JSON file.
Tests are found in test/tools/llvm-sim and check for the file not found,
a bad module, and that the JSON is created correctly.
Reviewers: paquette, jroelofs, MaskRay
Recommit of: 15645d044bcfe2a0f63156048b302f997a717688 to fix linking
errors and GN build system.
Differential Revision: https://reviews.llvm.org/D86974
Without this patch we're only showing a generic error message derived
from the error code to the end user.
rdar://79378794
Differential Revision: https://reviews.llvm.org/D104483
In a callback case, a return from internal code, say A, to external runtime can happen. The external runtime can then call back to another internal routine, say B. Making an artificial branch that looks like a return from A to B can confuse the unwinder to treat the instruction before B as the call instruction.
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D104546
Global initializers may be ConstantArrays. They need to be checked
explicitly, because different-yet-still-equivalent type names may be
used for each, and/or a GEP instruction may appear in one.
The only wrinkle is that we can't process the "blockaddress" arguments
of the callbr until the blocks have been equated. So we force them to be
"unified" before checking.
This was left out when the callbr instruction was added.
Differential Revision: https://reviews.llvm.org/D104606
0 latency instructions now get processed and retired properly within the in-order pipeline. Had to fix a bug within TimelineView.cpp as well that would show up when a 0 latency instruction was the first instruction in the source.
Differential Revision: https://reviews.llvm.org/D104675
Some APIs work with const variables while others don't. This can cause
conflicts when calling one from the other.
This is NFC.
Differential Revision: https://reviews.llvm.org/D104719
These serve as a convenient combination of consume_front/back and
startswith_lower/endswith_lower, consistent with other existing
case insensitive methods named <operation>_lower.
Differential Revision: https://reviews.llvm.org/D104218
