Error was:
field of type 'llvm::ArgDescriptor' has private default constructor
const AMDGPUFunctionArgInfo AMDGPUArgumentUsageInfo::ExternFunctionInfo{};
^
llvm-svn: 310048
Author: milena.vujosevic.janicic
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Usage of u_int64_t replaced by uint64_t to avoid issues because of which previous patch version was reverted:
Differential Revision: https://reviews.llvm.org/D34511
llvm-svn: 310044
Summary: When polly is linked into the tools because of the LLVM_POLLY_LINK_INTO_TOOLS option being set, we need to register its passes with the PassBuilder. Because polly is linked in, we can directly call its callback registration method, which registers the appropriate callbacks with the new PM's PassBuilder. This essentially follows exactly the way it worked with the legacy PM.
Reviewers: grosser, chandlerc, bollu
Reviewed By: grosser
Subscribers: pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D36273
llvm-svn: 310043
In case if SI_KILL is in between of the SI_IF and SI_END_CF we need
to preserve the bits actually flipped by if rather then restoring
the original mask.
Differential Revision: https://reviews.llvm.org/D36299
llvm-svn: 310031
This change adds the "-O binary" flag which directs llvm-objcopy to
output the object file to the same format as GNU objcopy does when given
the flag "-O binary". This was done by splitting the Object class into
two subclasses ObjectELF and ObjectBianry which each output a different
format but relay on the same code to read in the Object in Object.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D34480
llvm-svn: 310018
The full story is in the comments:
// Do not attempt to close stdout or stderr. We used to try to maintain the
// property that tools that support writing file to stdout should not also
// write informational output to stdout, but in practice we were never able to
// maintain this invariant. Many features have been added to LLVM and clang
// (-fdump-record-layouts, optimization remarks, etc) that print to stdout, so
// users must simply be aware that mixed output and remarks is a possibility.
NFC, I am just updating comments to reflect reality.
llvm-svn: 310016
This is similar to what we are doing in "regular" SROA and creates
DW_OP_LLVM_fragment operations to describe the resulting variables.
rdar://problem/33654891
llvm-svn: 310014
Summary:
Following the docs, we need at least 5 wait states between an EXEC write
and an instruction that uses DPP.
Reviewers: tstellar, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D34849
llvm-svn: 310013
This patch makes a slight change to the way llvm-cov determines line
execution counts. If there are multiple line segments on a line, the
line count is the max count among the regions which start *and* end on
the line. This avoids an issue posed by deferred regions which start on
the same line as a terminated region, e.g:
if (false)
return; //< The line count should be 0, even though a new region
//< starts at the semi-colon.
foo();
Another change is that counts from line segments which don't correspond
to region entries are considered. This enables the first change, and
corrects an outstanding issue (see the showLineExecutionCounts.cpp test
change).
This is related to D35925.
Testing: check-profile, llvm-cov lit tests
Differential Revision: https://reviews.llvm.org/D36014
llvm-svn: 310012
Summary:
Detect when the working set size of a profiled application is huge,
by comparing the number of counts required to reach the hot percentile
in the profile summary to a large threshold*.
When the working set size is determined to be huge, disable peeling
to avoid bloating the working set further.
*Note that the selected threshold (15K) is significantly larger than the
largest working set value in SPEC cpu2006 (which is gcc at around 11K).
Reviewers: davidxl
Subscribers: mehdi_amini, mzolotukhin, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D36288
llvm-svn: 310005
Often something interesting (like a symbol) is in a particular
module, and you don't want to dump symbols from all other 300
modules to see the one you want. This adds a -modi option so that
we only dump the specified module.
llvm-svn: 310000
Summary:
This increases the inlining threshold for hot callsites. Hotness is
defined in terms of block frequency of the callsite relative to the
caller's entry block's frequency. Since this requires BFI in the
inliner, this only affects the new PM pipeline. This is enabled by
default at -O3.
This improves the performance of some internal benchmarks. Notably, an
internal benchmark for Gipfeli compression
(https://github.com/google/gipfeli) improves by ~7%. Povray in SPEC2006
improves by ~2.5%. I am running more experiments and will update the
thread if other benchmarks show improvement/regression.
In terms of text size, LLVM test-suite shows an 1.22% text size
increase. Diving into the results, 13 of the benchmarks in the
test-suite increases by > 10%. Most of these are small, but
Adobe-C++/loop_unroll (17.6% increases) and tramp3d(20.7% size increase)
have >250K text size. On a large application, the text size increases by
2%
Reviewers: chandlerc, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36199
llvm-svn: 309994
With this change, the GlobalISel library gets always built. In
particular, this is not possible to opt GlobalISel out of the build
using the LLVM_BUILD_GLOBAL_ISEL variable any more.
llvm-svn: 309990
Summary:
PDB section contributions are supposed to use output section indices and
offsets, not input section indices and offsets.
This allows the debugger to look up the index of the module that it
should look up in the modules stream for symbol information. With this
change, windbg can now find line tables, but it still cannot print local
variables.
Fixes PR34048
Reviewers: zturner
Subscribers: hiraditya, ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D36285
llvm-svn: 309987
Summary:
(This is a second attempt as https://reviews.llvm.org/D34822 was reverted.)
LazyValueInfo currently computes the constant value of the switch condition through case edges, which allows the constant value to be propagated through the case edges.
But we have seen a case where a zero-extended value of the switch condition is used past case edges for which the constant propagation doesn't occur.
This patch adds a small logic to handle such a case in getEdgeValueLocal().
This is motivated by the Python 2.7 eval loop in PyEval_EvalFrameEx() where the lack of the constant propagation causes longer live ranges and more spill code than necessary.
With this patch, we see that the code size of PyEval_EvalFrameEx() decreases by ~5.4% and a performance test improves by ~4.6%.
Reviewers: sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36247
llvm-svn: 309986
Summary: Move test/CodeGen/AArch64/reg-bank-128bit.mir to test/CodeGen/AArch64/GlobalISel/reg-bank-128bit.mir so that the test is executed only when global-isel is enabled. lit.local.cfg under test/CodeGen/AArch64/GlobalISel checks if 'global-isel' is in the available_features while the same file under test/CodeGen/AArch64 doesn't.
Reviewers: qcolombet, davide
Reviewed By: davide
Subscribers: davide, aemerson, javed.absar, igorb, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D36282
llvm-svn: 309985
Sometimes the normal module equivalence detection algorithm doesn't
quite work. For example, you might build the same program with
MSVC and clang-cl, outputting to different object files, exes, and
PDBs, then compare them. If the object files have different names
though, then they won't be treated as equivalent. This way we
can force specific module indices to be treated as equivalent.
llvm-svn: 309983
The file is called "intrin.h". When building targeting Windows on a Linux
system, with the SDK mounted in a case-insensitive file system, "Intrin.h" will
miss clang's intrin.h header (because that's not in a case-insensitive file
system) but then find intrin.h in the Microsoft SDK. clang can't handle the
SDK's intrin.h.
https://reviews.llvm.org/D36281
llvm-svn: 309980
Multi-configuration CMake generators such as those for Visual Studio or Xcode do not
specify a build config at configure time, but let the user choose at build
time. In these cases binaries go into build/${Configuration}/bin rather than
build/bin. Prior to this commit, check-lit would fail when using multi-configuration
generators as it did not know how to resolve ${Configuration} in order
to find tools such as FileCheck. This commit teaches it to resolve
llvm_tools_dir within lit using the value specified with --param
build_mode.
Differential Revision: https://reviews.llvm.org/D36263
llvm-svn: 309967
Summary:
Peeling should not occur during the full unrolling invocation early
in the pipeline, but rather later with partial and runtime loop
unrolling. The later loop unrolling invocation will also eventually
utilize profile summary and branch frequency information, which
we would like to use to control peeling. And for ThinLTO we want
to delay peeling until the backend (post thin link) phase, just as
we do for most types of unrolling.
Ensure peeling doesn't occur during the full unrolling invocation
by adding a parameter to the shared implementation function, similar
to the way partial and runtime loop unrolling are disabled.
Performance results for ThinLTO suggest this has a neutral to positive
effect on some internal benchmarks.
Reviewers: chandlerc, davidxl
Subscribers: mzolotukhin, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D36258
llvm-svn: 309966
Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate.
Reviewers: tejohnson, davidxl, eraman
Reviewed By: eraman
Subscribers: sanjoy, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D36025
llvm-svn: 309964
When both the vector inputs of the shuffle vector is comprising of same vector or shuffle mask is accessing elements from only one operand vector (like in PR33758 test already present).
Committed on behalf of @jbhateja (Jatin Bhateja)
Differential Revision: https://reviews.llvm.org/D36271
llvm-svn: 309963
