This patch refactors `emitDebugInfo()` to make the length field be
inferred from its content. Besides, the `Visitor` class is removed in
this patch. The original `Visitor` class helps us determine an
appropriate length and emit the .debug_info section. These two
processes can be merged into one process. Besides, the length field
should be inferred when it's missing rather than when it's zero.
Reviewed By: jhenderson, labath
Differential Revision: https://reviews.llvm.org/D84008
This adds unit tests to check the expected behavior of the method in
case the unit length field is truncated.
Differential Revision: https://reviews.llvm.org/D83673
Add a unit test for the compact DWARF expression printer which will be
used by the llvm-objdump --debug-vars option.
Differential revision: https://reviews.llvm.org/D75250
There are following issues with `CFIProgram::parse` code:
1) Invalid CFI opcodes were never tested. And currently a test would fail
when the `LLVM_ENABLE_ABI_BREAKING_CHECKS` is enabled. It happens because
the `DataExtractor::Cursor C` remains unchecked when the
"Invalid extended CFI opcode" error is reported:
```
.eh_frame section at offset 0x1128 address 0x0:
Program aborted due to an unhandled Error:
Error value was Success. (Note: Success values must still be checked prior to being destroyed).
```
2) It is impossible to reach the "Invalid primary CFI opcode" error with the current code.
There are 3 possible primary opcode values and all of them are handled. Hence this error
should be replaced with llvm_unreachable.
3) Errors currently reported are upper-case.
This patch refines the code in the `CFIProgram::parse` method to fix all issues mentioned
and adds unit tests for all possible invalid extended CFI opcodes.
Differential revision: https://reviews.llvm.org/D82868
Previously, the debug line parser would keep attempting to read data
even if it had run out of data to read. This meant errors in parsing
would often end up being reported as something else, such as an unknown
version or malformed directory/filename table. This patch fixes the
issues by using the Cursor API to capture errors.
Reviewed by: labath
Differential Revision: https://reviews.llvm.org/D83043
Summary:
The byte swap fix for big endian hosts in 9782c922cb21 (for D81570)
swaps based on the host endianess, but for cross-targeting builds (i.e.
big endian host targeting little endian) the host-endianess won't
necessarily match the generated DWARF. This change updates the test
to use symmetrical constants so the results aren't endian dependent.
Reviewers: jhenderson, hubert.reinterpretcast, stevewan, ikudrin
Reviewed By: ikudrin
Subscribers: ikudrin, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82827
'InitialLength' is replaced with 'Format' (DWARF32 by default) and 'Length' in this patch.
Besides, test cases for DWARFv4 and DWARFv5, DWARF32 and DWARF64 is
added.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D82622
Currently when the .eh_frame section is truncated so that
CFI instructions can't be read, it is possible to enter
an infinite loop.
It happens because `CFIProgram::parse` does not handle errors properly.
This patch fixes the issue.
Differential revision: https://reviews.llvm.org/D82017
Previously, if there was an error whilst parsing the operands of an
extended opcode, the operands would be treated as zero and printed. This
could potentially be slightly confusing. This patch changes the
behaviour to print the raw bytes instead.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D81570
Standard opcodes usually have ULEB128 arguments, so it is generally not
possible to recover from such errors. This patch causes the parser to
stop parsing the table in such situations.
Also don't emit the operands or add data to the table if there is an
error reading these opcodes.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D81470
Summary:
This makes the code easier to reason about, as it will behave the same
way regardless of whether there is any more data coming after the
presumed end of the prologue.
Reviewers: jhenderson, dblaikie, probinson, ikudrin
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77557
The verbose printing of unrecognised standard opcodes was broken in
multiple ways (additional blank lines, a closing parenthesis without
opening parenthesis and so on). This patch fixes it, and makes the
output more consistent with other opcodes.
The new line printing for debug line verbose output was inconsistent.
For new rows in the matrix, a blank line followed, whilst the
DW_LNS_copy opcode actually resulted in two blank lines. There was also
potential inconsistency in the blank lines at the end of the table. This
patch mostly resolves these issues - no blank lines appear in the output
except for a single line after the prologue and at table end to separate
it from any subsquent table, plus some instances after error messages.
Also add a unit test for verbose output to test the fine details of new
line placement and other aspects of verbose output.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D81102
Verbose and non-verbose parsing of .debug_line produced their output at
different points in the program. The most obvious impact of this was
that error messages were produced at different times, but it also
potentially reduced what clients could do by customising the stream or
warning/error handlers.
This change makes the two variants consistent by printing non-verbose
output inline, the same as verbose output.
Testing of the error messages has been modified to check the messages
always appear in the same location to illustrate the behaviour.
Reviewed by: JDevlieghere, dblaikie, MaskRay, labath
Differential Revision: https://reviews.llvm.org/D80989
Previously, if an extended opcode was truncated, it would manifest as an
"unexpected line op length error" which wasn't quite accurate. This
change checks for errors any time data is read whilst parsing an
extended opcode, and reports any errors detected.
Reviewed by: MaskRay, labath, aprantl
Differential Revision: https://reviews.llvm.org/D80797
Summary:
This is a result of the discussion at D78113. Previously we would be
only giving the current offset at which the error was detected. However,
this was phrased somewhat ambiguously (as it could also mean that end of
data was at that offset). The new error message includes the current
offset as well as the extent of the data being read.
I've changed a couple of file-level static functions into private member
functions in order to avoid passing a bunch of new arguments everywhere.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78558
The patch changes dumping of DWARF form values which sizes depend on
the DWARF format so that they are printed as 16-digit hex values for
DWARF64.
Differential Revision: https://reviews.llvm.org/D79997
Summary: This implements searching for function symbols and public symbols by address.
More specifically,
-Implements NativeSession::findSymbolByAddress for function symbols and
public symbols. I think data symbols are also searched for, but isn't
implemented in this patch.
-Adds classes for NativeFunctionSymbol and NativePublicSymbol
-Adds a '-use-native-pdb-reader' option to llvm-symbolizer, for testing
purposes.
Reviewers: rnk, amccarth, labath
Subscribers: mgorny, hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79269
We unconditionally compared the DW_AT_ranges offset to the length of the
.debug_ranges section. For DWARF5 we should look at the debug_rnglists
section instead.
Differential revision: https://reviews.llvm.org/D78971
the tests pass on Linux.
Summary:
This change implements readFromExe, and calculating VA and RVA, which
are some of the functionalities that will be used for native PDB reading
for llvm symbolizer.
bug: https://bugs.llvm.org/show_bug.cgi?id=41795
Summary:
This change implements readFromExe, and calculating VA and RVA, which
are some of the functionalities that will be used for native PDB reading
for llvm symbolizer.
bug: https://bugs.llvm.org/show_bug.cgi?id=41795
Reviewers: hans, amccarth, rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78128
Summary:
Without this we could silently accept an invalid prologue because the
default DataExtractor behavior is to return an empty string when
reaching the end of file. And empty string is also used to terminate
these lists.
This makes the parsing code slightly more complicated, but this
complexity will go away once the parser starts working with truncating
data extractors. The reason I am doing it this way is because without
this, the truncation would regress the quality of error messages (right
now, we produce bad error messages only near EOF, but truncation would
make everything behave as if it was near EOF).
Reviewers: dblaikie, probinson, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77555
Summary:
This constructor allows us to create a new DWARFDataExtractor which will
only present a subrange of an entire debug section. Since debug sections
typically consist of multiple contributions, it is expected that one
will create a new data extractor for each contribution in order to
avoid unexpectedly running off into the next one.
This is very useful for unifying the flows for detecting parse errors.
Without it, the code needs to consider two very different scenarios:
1. If there is another contribution after the current one, the
DataExtractor functions will just start reading from there. This is
detectable by comparing the current offset against the known
end-of-contribution offset.
2. If this is the last contribution, the data extractor will just start
returning zeroes (or other default values). This situation can *not*
be detected by checking the parsing offset, as this will not be
advanced in case of errors.
Using a truncated data extractor simplifies the code (and reduces
cognitive load) by making these two cases behave identically -- a
running off the end of a contribution will _always_ produce an EOF error
(if one uses error-aware parsing methods) or return default values.
Reviewers: dblaikie, probinson, jhenderson, ikudrin
Subscribers: aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77556
Summary:
If we have an (invalid) relocation which relocates bytes which partially
lie outside the range of the relocated section, the getRelocatedValue
would return confusing results. It would first read zero (because that's
what the underlying DataExtractor api does for out-of-bounds reads), and
then relocate that zero anyway.
A more appropriate behavior is to return zero straight away. This is
what this patch does.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78113
Summary:
Although the function had a bool return value, it was always returning
true. Presumably this is because the main type of errors one can
encounter here is running off the end of the stream, and until very
recently, the DataExtractor class made it very difficult to detect that.
The situation has changed now, and we can easily detect errors here,
which this patch does.
Reviewers: dblaikie, aprantl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77308
In DWARFv5, type units are stored in .debug_info sections, along with
compilation units, and they are distinguished by the unit_type field
in the header, not by the name of the section. It is impossible to
associate the correct index section of a DWP file with the unit before
the unit's header is read. This patch fixes reading DWARFv5 type units
by parsing the header first and then applying the index entry according
to the actual unit type.
Differential Revision: https://reviews.llvm.org/D77552
Summary:
1. FileLineInfoSpecifier::Default isn't the default for anything.
Rename to RawValue, which accurately reflects its role.
2. Most functions that take a part of a FileLineInfoSpecifier end up
constructing a full one later or plumb two values through. Make them
all just take a complete FileLineInfoSpecifier.
3. Printing basenames only was handled differently from all other
variants, make it parallel to all the other variants.
Reviewers: jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76394
MCTargetOptionsCommandFlags.inc and CommandFlags.inc are headers which contain
cl::opt with static storage.
These headers are meant to be incuded by tools to make it easier to parametrize
codegen/mc.
However, these headers are also included in at least two libraries: lldCommon
and handle-llvm. As a result, when creating DYLIB, clang-cpp holds a reference
to the options, and lldCommon holds another reference. Linking the two in a
single executable, as zig does[0], results in a double registration.
This patch explores an other approach: the .inc files are moved to regular
files, and the registration happens on-demand through static declaration of
options in the constructor of a static object.
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1756977#c5
Differential Revision: https://reviews.llvm.org/D75579
Makes tests fail on Windows, see https://reviews.llvm.org/D70720#1924542
This reverts commit 3a5ddedadb671e485ce5c638142817879ac14a8c, and
follow-ups:
f4cb9c919e28276222873453cf85de9e5a3c7be5
042eb0482aa758057c4f77616a4696cdb21b4fcc
c0cf5f5da9a7bf1bdf43ed53287b0f634fc53045
18649f48139932377c2a2909f1fb600bf5cf6e57
f62b898c1f5dd77e68b53570dc2679877bcbe4c2
Add a unit test for the compact DWARF expression printer which will be
used by the llvm-objdump --debug-vars option.
Differential revision: https://reviews.llvm.org/D75250
If the minimum_instruction_length of a debug line program is 0, no
address advancing via special opcodes, DW_LNS_const_add_pc, and
DW_LNS_advance_pc can occur, since the minimum_instruction_length is
used in a multiplication. This patch adds a warning reporting when this
issue occurs.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D75189
