Summary:
There are three parts to inlined call frames:
1. The inlinee line subsection
2. The inline site symbol record
3. The function ids referenced by both
This change starts by emitting function ids (3) for all subprograms and
emitting the base inline site symbol record (2). The actual line numbers
in (2) use an encoded format that will come next, along with the inlinee
line subsection.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16333
llvm-svn: 259217
The buildSchedGraph() was in need of reworking as the AA features had been
added on top of earlier code. It was very difficult to understand, and buggy.
There had been found cases where scheduling dependencies had actually been
missed (see r228686).
AliasChain, RejectMemNodes, adjustChainDeps() and iterateChainSucc() have
been removed. There are instead now just the four maps from Value to SUs, which
have been renamed to Stores, Loads, NonAliasStores and NonAliasLoads.
An unknown store used to become the AliasChain, but now becomes a store mapped
to 'unknownValue' (in Stores). What used to be PendingLoads is instead the
list of SUs mapped to 'unknownValue' in Loads.
RejectMemNodes and adjustChainDeps() used to be a safety-net for everything.
The SU maps were sometimes cleared and SUs were put in RejectMemNodes, where
adjustChainDeps() would look. Instead of this, a more straight forward approach
is used in maintaining the SU maps without clearing them and simply letting
them grow over time. Instead of the cutt-off in adjustChainDeps() search, a
reduction of maps will be done if needed (see below).
Each SUnit either becomes the BarrierChain, or is put into one of the maps. For
each SUnit encountered, all the information about previous ones are still
available until a new BarrierChain is set, at which point the maps are cleared.
For huge regions, the algorithm becomes slow, therefore the maps will get
reduced at a threshold (current default is 1000 nodes), by a fraction (default 1/2).
These values can be tuned by use of CL options in case some test case shows that
they need to be changed (-dag-maps-huge-region and -dag-maps-reduction-size).
There has not been any considerable change observed in output quality or compile
time. There may now be more DAG edges inserted than before (i.e. if A->B->C,
then A->C is not needed). However, in a comparison run there were fewer total
calls to AA, and a somewhat improved compile time, which means this seems to
be not a problem.
http://reviews.llvm.org/D8705
Reviewers: Hal Finkel, Andy Trick.
llvm-svn: 259201
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
While legalizing a 64-bit shift left by 1, the following occurs:
We split the shift operand in half: a high half and a low half.
We then create an ADDC with the low half and a ADDE with the high half +
the carry bit from the ADDC.
This is problematic if X is any_ext'd because the high half computation
is now undef + undef + carry bit and there is no way to ensure that the
two undef values had the same bitwise representation. This results in
the lowest bit in the high half turning into garbage.
Instead, do not try to turn shifts into arithmetic during type
legalization.
This fixes PR26350.
llvm-svn: 259065
Re-commit of r258951 after fixing layering violation.
The related LLVM patch adds a backend diagnostic type for reporting
unsupported features, this adds a printer for them to clang.
In the case where debug location information is not available, I've
changed the printer to report the location as the first line of the
function, rather than the closing brace, as the latter does not give the
user any information. This also affects optimisation remarks.
Differential Revision: http://reviews.llvm.org/D16590
llvm-svn: 259035
Summary:
findBetterNeighborChains does not handle volatile or indexed stores.
However, it did not check when adding stores to ChainedStores.
Reviewers: arsenm
Differential Revision: http://reviews.llvm.org/D16463
llvm-svn: 259024
The BPF and WebAssembly backends had identical code for emitting errors
for unsupported features, and AMDGPU had very similar code. This merges
them all into one DiagnosticInfo subclass, that can be used by any
backend.
There should be minimal functional changes here, but some AMDGPU tests
have been updated for the new format of errors (it used a slightly
different format to BPF and WebAssembly). The AMDGPU error messages will
now benefit from having precise source locations when debug info is
available.
The implementation of DiagnosticInfoUnsupported::print must be in
lib/Codegen rather than in the existing file in lib/IR/ to avoid
introducing a dependency from IR to CodeGen.
Differential Revision: http://reviews.llvm.org/D16590
llvm-svn: 258951
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
These two functions are hard to reason about. This commit makes the code
more comprehensible:
- Use four distinct variables (OldIdxIn, OldIdxOut, NewIdxIn, NewIdxOut)
with a fixed value instead of a changing iterator I that points to
different things during the function.
- Remove the early explanation before the function in favor of more
detailed comments inside the function. Should have more/clearer comments now
stating which conditions are tested and which invariants hold at
different points in the functions.
The behaviour of the code was not changed.
I hope that this will make it easier to review the changes in
http://reviews.llvm.org/D9067 which I will adapt next.
Differential Revision: http://reviews.llvm.org/D16379
llvm-svn: 258756
When generating calls to memcpy, memmove, and memset, use void* as the return
type rather than void, to match the standard signatures for these functions.
This has no practical effect for most targets, since the return values of
these calls aren't being used anyway, and most calling conventions tolerate
this kind of mismatch. However, this change will help support future
optimizations to utilize the return value to avoid holding the argument
value live across a call.
llvm-svn: 258691
A cleanup can have paths which unwind or end up in unreachable.
If there is an unreachable path *and* a path which unwinds to caller,
we would mistakenly inject an unwind path to a catchswitch on the
unreachable path. This results in a verifier assertion firing because
the cleanup unwinds to two different places: to the caller and to the
catchswitch.
This occured because we used getCleanupRetUnwindDest to determine if the
cleanuppad had no cleanuprets.
This is incorrect, getCleanupRetUnwindDest returns null for cleanuprets
which unwind to caller.
llvm-svn: 258651
Cleanups in C++ are a little weird. They are only guaranteed to be
reliably executed if, and only if, there is a viable catch handler which
can handle the exception.
This means that reachability of a cleanup is lexically determined by it
being nested with a try-block which unwinds to a catch. It is *cannot*
be reasoned about by examining the control flow edges leaving a cleanup.
Usually this is not a problem. It becomes a problem when there are *no*
edges out of a cleanup because we believed that code post-dominated by
the cleanup is dead. In LLVM's case, this code is what informs the
personality routine about the presence of a suitable catch handler.
However, the lack of edges to that catch handler makes the handler
become unreachable which causes us to remove it. By removing the
handler, the cleanup becomes unreachable.
Instead, inject a catch-all handler with every cleanup that has no
unwind edges. This will allow us to properly unwind the stack.
This fixes PR25997.
llvm-svn: 258580
Summary:
The testing for returnBB was flipped which may cause ARM ld/st opt pass uses callee saved regs in returnBB when shrink-wrap is used.
Reviewers: t.p.northover, apazos, MatzeB
Subscribers: mcrosier, zzheng, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D16434
llvm-svn: 258569
This reapplies r258296 and r258366, and also fixes an existing bug in
SelectionDAG.cpp's isMemSrcFromString, neglecting to account for the
offset in a GlobalAddressSDNode, which is uncovered by those patches.
llvm-svn: 258482
This reverts r258296 and the follow up r258366. With this change, we
miscompiled the following program on Windows:
#include <string>
#include <iostream>
static const char kData[] = "asdf jkl;";
int main() {
std::string s(kData + 3, sizeof(kData) - 3);
std::cout << s << '\n';
}
llvm-svn: 258465
The X86 musttail implementation finds register parameters to forward by
running the calling convention algorithm until a non-register location
is returned. However, assigning a vector memory location has the side
effect of increasing the function's stack alignment. We shouldn't
increase the stack alignment when we are only looking for register
parameters, so this change conditionalizes it.
llvm-svn: 258442
Summary: This option is being added for testing purposes.
Reviewers: mcrosier
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D16410
llvm-svn: 258409
Summary:
Although this is a slight cleanup on its own, the main motivation is to
refactor the constant folding API to ease migration to opaque pointers.
This will be follow-up work.
Reviewers: eddyb
Subscribers: zzheng, dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D16380
llvm-svn: 258390
Summary:
Mark the LLVMGlobalISel library as optional in
LLVMBuild.txt, since the library is only built
if LLVM_BUILD_GLOBAL_ISEL is set. Without doing
this, llvm-config includes the library in the
list of components regardless of whether it's
built, and then will error out when asked for
the library names/paths.
Reviewers: qcolombet
Subscribers: joker.eph, llvm-commits, vkalintiris
Differential Revision: http://reviews.llvm.org/D16386
llvm-svn: 258379
