Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for
targets with mature MC support. Such targets will always parse the inline
assembly (even when emitting assembly). Targets without mature MC support
continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced
with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler
to parse inline assembly (even when emitting assembly output). UseIntegratedAs
is set to true for targets that consider any failure to parse valid assembly
to be a bug. Target specific subclasses generally enable the integrated
assembler in their constructor. The default value can be overridden with
-no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example,
those that use mnemonics such as 'foo' or 'hello world') have been updated to
disable the integrated assembler.
Changes since review (and last commit attempt):
- Fixed test failures that were missed due to configuration of local build.
(fixes crash.ll and a couple others).
- Fixed tests that happened to pass because the local build was on X86
(should fix 2007-12-17-InvokeAsm.ll)
- mature-mc-support.ll's should no longer require all targets to be compiled.
(should fix ARM and PPC buildbots)
- Object output (-filetype=obj and similar) now forces the integrated assembler
to be enabled regardless of default setting or -no-integrated-as.
(should fix SystemZ buildbots)
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201333
The old mask in f24 wasn't well chosen because the lshr would always be zero.
CodeGen didn't detect this but InstCombine would. The new mask ensures
that both shifts are needed.
f26 is specifically testing for a wrap-around mask. The AND can be applied
to just the shift left, either before or after the shift. Again, CodeGen
kept it in the original form but InstCombine would mask after the shift
instead. The exact choice of NILF isn't important for the test so I just
dropped it and kept the rotate.
llvm-svn: 199115
...into (ashr (shl (anyext X), ...), ...), which requires one fewer
instruction. The (anyext X) can sometimes be simplified too.
I didn't do this in DAGCombiner because widening shifts isn't a win
on all targets.
llvm-svn: 199114
The zext handling added in r197802 wasn't right for RNSBG. This patch
restricts it to ROSBG, RXSBG and RISBG. (The tests for RISBG were added
in r197802 since RISBG was the motivating example.)
llvm-svn: 198862
At the moment we expect rotates to have the form:
(or (shl X, Y), (shr X, Z))
where Y == bitsize(X) - Z or Z == bitsize(X) - Y. This form means that
the (or ...) is undefined for Y == 0 or Z == 0. This undefinedness can
be avoided by using Y == (C * bitsize(X) - Z) & (bitsize(X) - 1) or
Z == (C * bitsize(X) - Y) & (bitsize(X) - 1) for any integer C
(including 0, the most natural choice).
llvm-svn: 198861
InstCombine converts (sub 32, (add X, C)) into (sub 32-C, X),
so a rotate left of a 32-bit Y by X+C could appear as either:
(or (shl Y, (add X, C)), (shr Y, (sub 32, (add X, C))))
without InstCombine or:
(or (shl Y, (add X, C)), (shr Y, (sub 32-C, X)))
with it.
We already matched the first form. This patch handles the second too.
llvm-svn: 198860
...namely LOAD AND ADD, LOAD AND AND, LOAD AND OR and LOAD AND EXCLUSIVE OR.
LOAD AND ADD LOGICAL isn't really separately useful for LLVM.
I'll look at adding reusing the CC results in new year.
llvm-svn: 197985
If the extension of a loaded value is compared against zero and used in
other arithmetic, InstCombine will change the comparison to use the
unextended load. It's also possible that the comparison could be against
the unextended load from the outset.
In DAG form this becomes a truncation of an extending load. We want to
strip the truncation if possible so that we can use load-and-test instructions.
llvm-svn: 197804
The handling of ANY_EXTEND and ZERO_EXTEND was too strict. In this context
we can treat ZERO_EXTEND in much the same way as an AND and then also handle
outermost ZERO_EXTENDs.
I couldn't find a test that benefited from the ANY_EXTEND change, but it's
more obvious to write it this way once SIGN_EXTEND and ZERO_EXTEND are
handled differently.
llvm-svn: 197802
This reverts commit r197466.
The MachineCSE fix that required the -mcpu flag has been disabled
until more work can be done to fix downstream issues. Adding -mcpu
wasn't the right workaround anyway.
llvm-svn: 197624
This originally came about after noticing that InstCombine turns
some of the TMHH (icmp (and...), ...) tests into plain comparisons.
Since there is no instruction to compare with a 64-bit immediate,
TMHH is generally better than an ordered comparison for the cases
that it can handle.
llvm-svn: 197238
This patch makes more use of LPGFR and LNGFR. It builds on top of
the LTGFR selection from r197234. Most of the tests are motivated
by what InstCombine would produce.
llvm-svn: 197236
InstCombine turns (sext (trunc)) into (ashr (shl)), then converts any
comparison of the ashr against zero into a comparison of the shl against zero.
This makes sense in itself, but we want to undo it for z, since the sign-
extension instruction has a CC-setting form.
I've included tests for both the original and InstCombined variants,
but the former already worked. The patch fixes the latter.
llvm-svn: 197234
DAGCombiner could fold (truncate (load)) -> smaller load if the original
load was the width of the truncation result or wider. This patch extends
it to handle cases where the original load was narrower (and so the
extension type stays the same).
llvm-svn: 197030
One unusual feature of the z architecture is that the result of a
previous load can be reused indefinitely for subsequent loads, even if
a cache-coherent store to that location is performed by another CPU.
A special serializing instruction must be used if you want to force
a load to be reattempted.
Since volatile loads are not supposed to be omitted in this way,
we should insert a serializing instruction before each such load.
The same goes for atomic loads.
The patch implements this at the IR->DAG boundary, in a similar way
to atomic fences. It is a no-op for targets other than SystemZ.
llvm-svn: 196906
One unusual feature of the z architecture is that the result of a
previous load can be reused indefinitely for subsequent loads, even if
a cache-coherent store to that location is performed by another CPU.
A special serializing instruction must be used if you want to force
a load to be reattempted.
Since volatile loads are not supposed to be omitted in this way,
we should insert a serializing instruction before each such load.
The same goes for atomic loads.
The patch implements this at the IR->DAG boundary, in a similar way
to atomic fences. It is a no-op for targets other than SystemZ.
llvm-svn: 196905
Since z has no setcc instruction as such, the choice of setBooleanContents
is a bit arbitrary. Currently it's set to ZeroOrOneBooleanContent,
so we produced a branch-free form when selecting between 0 and 1,
but not when selecting between 0 and -1. This patch handles the latter
case too.
At some point I'd like to measure whether it's better to use conditional
moves for constant selects on z196, but that's future work.
llvm-svn: 196578
The backend converts 64-bit ORs into subreg moves if the upper 32 bits
of one operand and the low 32 bits of the other are known to be zero.
It then tries to peel away redundant ANDs from the upper 32 bits.
Since AND masks are canonicalized to exclude known-zero bits,
the test ORs the mask and the known-zero bits together before
checking for redundancy. The problem was that it was using the
wrong node when checking for known-zero bits, so could drop ANDs
that were still needed.
llvm-svn: 196267
We would wrongly transform the testcase into the equivalent of an AND with 1.
The problem was that, when testing whether the shifted-in bits of the right
shift were significant, we used the width of the final zero-extended result
rather than the width of the shifted value.
llvm-svn: 195731
I've no idea why I decided to handle TMxx differently from all the other
high/low logic operations, but it was a stupid thing to do. The high
registers aren't available as separate 32-bit registers on z10,
so subreg_h32 can't be used on a GR64 there.
I've normally been testing with z196 and with -O3 and so hadn't noticed
this until now.
llvm-svn: 195473
As on other hosts, the CPU identification instruction is priveleged,
so we need to look through /proc/cpuinfo. I copied the PowerPC way of
handling "generic".
Several tests were implicitly assuming z10 and so failed on z196.
llvm-svn: 193742
useAA significantly improves the handling of vector code that has TBAA
information attached. It also helps other cases, as shown by the testsuite
changes here. The only real downside I've seen is that it interferes with
MergeConsecutiveStores. The problem is that that optimization works top
down, starting at the first store in the chain, and looks for cases where
the chain result is only used by a single related store. These related
stores don't alias, so useAA will have rewritten all the later stores to
use a different chain input (typically the same one as the first store).
I think the advantages outweigh the disadvantages though, so for now I've
just disabled alias analysis for the unaligned-01.ll test.
llvm-svn: 193521
Making useAA() default to true for SystemZ showed that the combiner alias
analysis wasn't handling volatile accesses. This hit many of the SystemZ
tests, but I arbitrarily picked one for the purpose of this patch.
llvm-svn: 193518
Most SelectionDAG code drops the TBAA info when creating a new form of a
load and store (e.g. during legalization, or when converting a plain
load to an extending one). This patch tries to catch all cases where
the TBAA information can legitimately be carried over.
The patch adds alternative forms of getLoad() and getExtLoad() that take
a MachineMemOperand instead of individual fields. (The corresponding
getTruncStore() already exists.) The idea is to use the MachineMemOperand
forms when all fields are carried over (size, pointer info, isVolatile,
isNonTemporal, alignment and TBAA info). If some adjustment is being
made, e.g. to narrow the load, then we still pass the individual fields
but also pass the TBAA info.
llvm-svn: 193517
We previously used the default expansion to SELECT_CC, which in turn would
expand to "LHI; BRC; LHI". In most cases it's better to use an IPM-based
sequence instead.
llvm-svn: 192784
This is really an extension of the current (shl (shr ...)) -> shl optimization.
The main difference is that certain upper bits must also not be demanded.
The motivating examples are the first two in the testcase, which occur
in llvmpipe output.
llvm-svn: 192783
