This adds a full itinerary for IBM's PPC64 A2 embedded core. These
cores form the basis for the CPUs in the new IBM BG/Q supercomputer.
llvm-svn: 153842
* Removed test/lib/llvm.exp - it is no longer needed
* Deleted the dg.exp reading code from test/lit.cfg. There are no dg.exp files
left in the test suite so this code is no longer required. test/lit.cfg is
now much shorter and clearer
* Removed a lot of duplicate code in lit.local.cfg files that need access to
the root configuration, by adding a "root" attribute to the TestingConfig
object. This attribute is dynamically computed to provide the same
information as was previously provided by the custom getRoot functions.
* Documented the config.root attribute in docs/CommandGuide/lit.pod
llvm-svn: 153408
The PPC64 SVR4 ABI requires integer stack arguments, and thus the var. args., that
are smaller than 64 bits be zero extended to 64 bits.
llvm-svn: 153373
Reverting this because it breaks static linking on ppc64. Specifically, it may be linkonce_odr functions that are the problem.
With this patch, if you link statically, calls to some functions end up calling their descriptor addresses instead
of calling to their entry points. This causes the execution to fail with SIGILL (b/c the descriptor address just
has some pointers, not code).
llvm-svn: 151433
The standard function epilog includes a .size directive, but ppc64 uses
an alternate local symbol to tag the actual start of each function.
Until recently, binutils accepted the .size directive as:
.size test1, .Ltmp0-test1
however, using this directive with recent binutils will result in the error:
.size expression for XXX does not evaluate to a constant
so we must use the label which actually tags the start of the function.
llvm-svn: 151200
This test case was way too strict, matching the entire assembly output.
Every non-trivial change to the ppc backend or -O0 pipeline required
the test to be updated.
It should be replaced with a test of the specific vaarg feature.
llvm-svn: 151105
1. The ST*UX instructions that store and update the stack pointer did not set define/kill on R1. This became a problem when I activated post-RA scheduling (and had incorrectly adjusted the Frames-large test).
2. eliminateFrameIndex did not kill its scavenged temporary register, and this could cause the scavenger to exhaust all available registers (and its emergency spill slot) when there were a lot of CR values to spill. The 2010-02-12-saveCR test has been adjusted to check for this.
llvm-svn: 147359
I followed three heuristics for deciding whether to set 'true' or
'false':
- Everything target independent got 'true' as that is the expected
common output of the GCC builtins.
- If the target arch only has one way of implementing this operation,
set the flag in the way that exercises the most of codegen. For most
architectures this is also the likely path from a GCC builtin, with
'true' being set. It will (eventually) require lowering away that
difference, and then lowering to the architecture's operation.
- Otherwise, set the flag differently dependending on which target
operation should be tested.
Let me know if anyone has any issue with this pattern or would like
specific tests of another form. This should allow the x86 codegen to
just iteratively improve as I teach the backend how to differentiate
between the two forms, and everything else should remain exactly the
same.
llvm-svn: 146370
I did not convert Atomics-32.ll and Atomics-64.ll by hand; the diff is autoupgrade output.
The wmb test is gone because there isn't any way to express wmb with the new atomic instructions; if someone really needs a non-asm way to write a wmb on Alpha, a platform-specific intrisic could be added.
llvm-svn: 140566
init.trampoline and adjust.trampoline intrinsics, into two intrinsics
like in GCC. While having one combined intrinsic is tempting, it is
not natural because typically the trampoline initialization needs to
be done in one function, and the result of adjust trampoline is needed
in a different (nested) function. To get around this llvm-gcc hacks the
nested function lowering code to insert an additional parent variable
holding the adjust.trampoline result that can be accessed from the child
function. Dragonegg doesn't have the luxury of tweaking GCC code, so it
stored the result of adjust.trampoline in the memory GCC set aside for
the trampoline itself (this is always available in the child function),
and set up some new memory (using an alloca) to hold the trampoline.
Unfortunately this breaks Go which allocates trampoline memory on the
heap and wants to use it even after the parent has exited (!). Rather
than doing even more hacks to get Go working, it seemed best to just use
two intrinsics like in GCC. Patch mostly by Sanjoy Das.
llvm-svn: 139140
for pre-2.9 bitcode files. We keep x86 unaligned loads, movnt, crc32, and the
target indep prefetch change.
As usual, updating the testsuite is a PITA.
llvm-svn: 133337
- Check for MTCTR8 in addition to MTCTR when looking up a hazard.
- When lowering an indirect call use CTR8 when targeting 64bit.
- Introduce BCTR8 that uses CTR8 and use it on 64bit when expanding ISD::BRIND.
The last change fixes PR8487. With those changes, we are able to compile a
running "ls" and "sh" on FreeBSD/PowerPC64.
llvm-svn: 132552
Currently the output should be almost identical to the one produced by CodeGen
to make the transition easier.
The only two differences I know of are:
* Some files get an extra advance loc of size 0. This will be fixed when
relaxations are enabled.
* The optimization of declaring an EH symbol as an external variable is not
implemented. This is a subset of adding the nounwind attribute, so we if really
this at -O0 we should probably do it at the IL level.
llvm-svn: 130623
The code inserted by PPCTargetLowering::EmitInstrWithCustomInserter for ppc64 is
wrong, and I don't know how to fix it. It seems to be using the correct register
classes for pointers, but it inserts all 32-bit instructions.
llvm-svn: 128835
It turns out that ppc backend has really weird interdependencies
over different hooks and all stuff is fragile wrt small changes.
This should fix PR8749
llvm-svn: 122155
alignment for PPC32/64, avoiding some masking operations.
llvm-gcc expands vaarg inline instead of using the instruction
so it has never hit this.
llvm-svn: 116168
void foo() { __builtin_unreachable(); }
It will output the following on Darwin X86:
_func1:
Leh_func_begin0:
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
This prolog adds a new Call Frame Information (CFI) row to the FDE with an
address that is not within the address range of the code it describes -- part is
equal to the end of the function -- and therefore results in an invalid EH
frame. If we emit a nop in this situation, then the CFI row is now within the
address range.
llvm-svn: 108568
the function. We'll just turn it into a "trap" instruction instead.
The problem with not handling this is that it might generate a prologue without
the equivalent epilogue to go with it:
$ cat t.ll
define void @foo() {
entry:
unreachable
}
$ llc -o - t.ll -relocation-model=pic -disable-fp-elim -unwind-tables
.section __TEXT,__text,regular,pure_instructions
.globl _foo
.align 4, 0x90
_foo: ## @foo
Leh_func_begin0:
## BB#0: ## %entry
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
...
The unwind tables then have bad data in them causing all sorts of problems.
Fixes <rdar://problem/8096481>.
llvm-svn: 108473
Objective-C metadata types which should be marked as "weak", but which the
linker will remove upon final linkage. However, this linkage isn't specific to
Objective-C.
For example, the "objc_msgSend_fixup_alloc" symbol is defined like this:
.globl l_objc_msgSend_fixup_alloc
.weak_definition l_objc_msgSend_fixup_alloc
.section __DATA, __objc_msgrefs, coalesced
.align 3
l_objc_msgSend_fixup_alloc:
.quad _objc_msgSend_fixup
.quad L_OBJC_METH_VAR_NAME_1
This is different from the "linker_private" linkage type, because it can't have
the metadata defined with ".weak_definition".
Currently only supported on Darwin platforms.
llvm-svn: 107433
when the condition is constant. This optimization shouldn't be
necessary, because codegen shouldn't be able to find dead control
paths that the IR-level optimizer can't find. And it's undesirable,
because it encourages bugpoint to leave "br i1 false" branches
in its output. And it wasn't updating the CFG.
I updated all the tests I could, but some tests are too reduced
and I wasn't able to meaningfully preserve them.
llvm-svn: 106748
otherwise labels get incorrectly merged. We handled this by emitting a
".byte 0", but this isn't correct on thumb/arm targets where the text segment
needs to be a multiple of 2/4 bytes. Handle this by emitting a noop. This
is more gross than it should be because arm/ppc are not fully mc'ized yet.
This fixes rdar://7908505
llvm-svn: 102400
in other types. fix this by only bumping zero-byte globals
up to a single byte if the *entire global* is zero size,
fixing PR6340.
This also fixes empty arrays etc to be handled correctly,
and only does this on subsection-via-symbols targets (aka
darwin) which is the only place where this matters.
llvm-svn: 101879
Make it so. (This patch is in LowerCall_Darwin, which seems
to be used by SVR4 code as well; since that doesn't belong here,
I haven't worried about this case.)
llvm-svn: 98077