Summary:
Found out, at code inspection, that there was a fault in
DAGCombiner::CombineConsecutiveLoads for big-endian targets.
A BUILD_PAIR is always having the least significant bits of
the composite value in element 0. So when we are doing the checks
for consecutive loads, for big endian targets, we should check
if the load to elt 1 is at the lower address and the load
to elt 0 is at the higher address.
Normally this bug only resulted in missed oppurtunities for
doing the load combine. I guess that in some rare situation it
could lead to faulty combines, but I've not seen that happen.
Note that this patch actually will trigger load combine for
some big endian regression tests.
One example is test/CodeGen/PowerPC/anon_aggr.ll where we now get
t76: i64,ch = load<LD8[FixedStack-9]
instead of
t37: i32,ch = load<LD4[FixedStack-10]>
t35: i32,ch = load<LD4[FixedStack-9]>
t41: i64 = build_pair t37, t35
before legalization. Then the legalization will split the LD8
into two loads, so the end result is the same. That should
verify that the transfomation is correct now.
Reviewers: niravd, hfinkel
Reviewed By: niravd
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D40444
llvm-svn: 319771
Summary:
A true or false result is expected from a comparison, but it seems the possibility of undef was overlooked, which could lead to a failed assert. This is fixed by this patch by bailing out if we encounter undef.
The bug is old and the assert has been there since the end of 2014, so it seems this is unusual enough to forego optimization.
Patch by JesperAntonsson.
Reviewers: spatel, eeckstein, hans
Reviewed By: hans
Subscribers: uabelho, llvm-commits
Differential Revision: https://reviews.llvm.org/D40639
llvm-svn: 319768
Pull the checks upon the load out from ReduceLoadWidth into their own
function.
Differential Revision: https://reviews.llvm.org/D40833
llvm-svn: 319766
This marks certain flags in XRay as deprecated (in particular,
`xray_naive_log=` and `xray_fdr_log=`), and recommends the use of the
`xray_mode=` flag.
llvm-svn: 319763
Move hardcoded itinerary out to the instruction declarations. Not sure that IIC_SSE_ALU_F32P is the best schedule for integer comparisons, but I'm not going to change it right now.
llvm-svn: 319760
Move hardcoded itinerary out to the instruction declarations. Not sure that IIC_SSE_ALU_F32P is the best schedule for integer comparisons, but I'm not going to change it right now.
llvm-svn: 319758
This has proven a healthy exercise, as many cases of incorrect instruction
flags were corrected in the process. As part of this, IntrWriteMem was added
to several SystemZ instrinsics.
Furthermore, a bug was exposed in TwoAddress with this change (as incorrect
hasSideEffects flags were removed and instructions could now be sunk), and
the test case for that bugfix (r319646) is included here as
test/CodeGen/SystemZ/twoaddr-sink.ll.
One temporary test regression (one extra copy) which will hopefully go away
in upcoming patches for similar cases:
test/CodeGen/SystemZ/vec-trunc-to-i1.ll
Review: Ulrich Weigand.
https://reviews.llvm.org/D40437
llvm-svn: 319756
MachineRegisterInfo used to allow just one regalloc hint per virtual
register. This patch extends this to a vector of regalloc hints, which is
filled in by common code with sorted copy hints. Such hints will make for
more ID copies that can be removed.
NB! This improvement is currently (and hopefully temporarily) *disabled* by
default, except for SystemZ. The only reason for this is the big impact this
has on tests, which has unfortunately proven unmanageable. It was a long
while since all the tests were updated and just waiting for review (which
didn't happen), but now targets have to enable this themselves
instead. Several targets could get a head-start by downloading the tests
updates from the Phabricator review. Thanks to those who helped, and sorry
you now have to do this step yourselves.
This should be an improvement generally for any target!
The target may still create its own hint, in which case this has highest
priority and is stored first in the vector. If it has target-type, it will
not be recomputed, as per the previous behaviour.
The temporary hook enableMultipleCopyHints() will be removed as soon as all
targets return true.
Review: Quentin Colombet, Ulrich Weigand.
https://reviews.llvm.org/D38128
llvm-svn: 319754
This recommits r319533 which was broken llvm-config --system-libs
output. The reason was that I used find_libraries for searching for the
z library. This returns absolute paths, and when these paths made it
into llvm-config, it made it produce nonsensical flags. To fix this, I
hand-roll a search for the library in the same way that we search for
the terminfo library a couple of lines below.
This is a bit less flexible than the find_library option, as it does not
allow the user to specify the path to the library at configure time
(which is important on windows, as zlib is unlikely to be found in any
of the standard places cmake searches), but I was able to guide the
build to find it with appropriate values of LIB and INCLUDE environment
variables.
Reviewers: compnerd, rnk, beanz, rafael
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D40779
llvm-svn: 319751
This is for PR35460.
Currently when LLD adds files to TarWriter it may pass the same file
multiple times. For example it happens for clang reproduce file which specifies
archive (.a) files more than once in command line.
Patch makes TarWriter to ignore files with the same path, so it will
add only the first one to archive.
Differential revision: https://reviews.llvm.org/D40606
llvm-svn: 319750
When trying to determine the correct Mask register class corresponding
to a GPR register class, not all register classes were handled.
This caused an assertion to be raised on some scenarios.
Differential Revision:
https://reviews.llvm.org/D40290
llvm-svn: 319745
The CONCAT_VECTORS operand get its type from getSetCCResultType, but if the mask type and the setcc have different scalar sizes this creates an illegal CONCAT_VECTORS operation. The concat type should be 2x the mask type, and then an extend should be added if needed.
llvm-svn: 319744
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319740
This calls handleMove with a DBG_VALUE instruction,
which isn't tracked by LiveIntervals. I'm not sure
this is the correct place to fix this. The generic
scheduler seems to have more deliberate region
selection that skips dbg_value.
The test is also really hard to reduce. I haven't been able
to figure out what exactly causes this particular case to
try moving the dbg_value.
llvm-svn: 319732
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319728
The getConstant function can take care of creating the APInt internally.
getZeroVector will take care of using the correct type for the build vector to avoid re-lowering.
The test change here is because execution domain constraints apparently pass through undef inputs of a zeroing xor. So the different ordering of register allocation here caused the dependency to change.
llvm-svn: 319725
Move the AVX512 code out of LowerAVXExtend. LowerAVXExtend has two callers but one of them pre-checks for AVX-512 so the code is only live from the other caller. So move the AVX-512 checks up to that caller for symmetry.
Move all of the i1 input type code in Lower_AVX512ZeroExend together.
llvm-svn: 319724
The "x${...}" form was a workaround for CMake versions prior to 3.1,
where the if command would interpret arguments as variables even when
quoted [1]. We can drop the workaround now that our minimum CMake
version is 3.4.
[1] https://cmake.org/cmake/help/v3.1/policy/CMP0054.html
Differential Revision: https://reviews.llvm.org/D40744
llvm-svn: 319723
Consistently use the same parameter names as the names of the affected
fields. This avoids some unintuitive abbreviations like `isSS`.
llvm-svn: 319722
While we cannot skip the whole TwoAddressInstructionPass even for -O0
there are some parts of the pass that are currently skipped at -O0 but
not for optnone. Changing this as there is no reason to have those two
hit different code paths here.
llvm-svn: 319721
Using comma can break in cases when we're passing flags that already
use comma as a separator.
Fixes PR35504.
Differential Revision: https://reviews.llvm.org/D40761
llvm-svn: 319719
It's not implemented.
Passing +fp64-fp16-denormal feature enables fp64 even on asics that don't support it
v2: fix hasFP64 query
Differential Revision: https://reviews.llvm.org/D39931
llvm-svn: 319709
Move the entire optimization to one place. Before it was possible
to adjust dmask without changing the register class of the output
instruction, since they were done in separate places. Fix all
lane sizes and move all of the optimization into the DAG folding.
llvm-svn: 319705
Summary:
While implementing atomicrmw in https://reviews.llvm.org/D40092 I found that
inheritance is unusable for all the Generic Opcodes in GlobalISel. This is
because the whole header is included inside a 'let mayLoad = 0, mayStore = 0 ... in'
block. In TableGen, the order of precedence for field assignments is:
1. Values from classes the record inherits from.
2. Values from 'let Name=Value in { ... }'
3. Values from 'let Name=Value;'
As such the 'let mayLoad = 0, mayStore = 0, ... in' surrounding the
'include "GenericOpcodes.td"' was overriding any values provided via inheritance.
We hadn't noticed this before because we were only using 'let Name=Value;' to
specialize opcodes.
Fix this by moving the default values to the lowest precedence. This is
accomplished by moving the values to a common base class
(StandardPseudoInstruction for most TargetOpcodes, and GenericOpcode for
GlobalISel specific TargetOpcodes)
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D40096
llvm-svn: 319701
Set the .debug_line version to match the requested DWARF version,
except with a maximum of v4 because we don't support v5 yet.
Previously Chromium had issues with this patch; see PR31407. Chromium
tool issues have been addressed, so hopefully this will go through
this time.
Patch by Katya Romanova!
Differential Revision: https://reviews.llvm.org/D38002
llvm-svn: 319699
MatchRotate assumes the types of the types of LHS and RHS are equal,
which is always the case then they come from an OR node, but here
we're getting them from two different TRUNC nodes, so we have to check
the types.
llvm-svn: 319695
If the truncation has been pushed past the or-node, look through it and
truncate afterwards.
Differential revision: https://reviews.llvm.org/D40792
llvm-svn: 319692
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
Summary:
Move splitIndirectCriticalEdges() from CodeGenPrepare to BasicBlockUtils.h so
that it can be called from other places.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40750
llvm-svn: 319689
Follow-up of r316824. This patch supports the vector type for both current and
previous index when factoring out the current one into the previous one.
Differential Revision: https://reviews.llvm.org/D39556
llvm-svn: 319683
