This adds some basic, "worst case" handling for MVE predicate Or/And/Xor. It
does this by going into and out of GPRs, doing the operation on scalars.
Code by David Sherwood.
Differential Revision: https://reviews.llvm.org/D65053
llvm-svn: 366907
This change make sure that llvm does not emit an invalid IT block
by putting the constant pool in the middle of an IT block.
We have code to try to avoid putting a constant island in the middle of an
IT block, but it only works if we see an IT between the one currently
referencing CPE and possible insertion point. If the first instruction
we look at is the VLDRD after the IT , we never see the IT and does not
realize that the instruction doing the load could be in an IT block itself.
Differential Revision: https://reviews.llvm.org/D64621
Change-Id: I24cecb37cded75e8992870bd997f6226853bd920
llvm-svn: 366905
Summary:
SimplifyFPBinOp is a variant of SimplifyBinOp that lets you specify
fast math flags, but the name is misleading because both functions
can simplify both FP and non-FP ops. Instead, overload SimplifyBinOp
so that you can optionally specify fast math flags.
Likewise for SimplifyFPUnOp.
Reviewers: spatel
Reviewed By: spatel
Subscribers: xbolva00, cameron.mcinally, eraman, hiraditya, haicheng, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64902
llvm-svn: 366902
Summary:
A number of EXPECT statements in FileCheck's unit tests are dependent
from results of other values being tested. This commit changes those
earlier test to use ASSERT instead of EXPECT to avoid cascade errors
when they are all related to the same issue.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64921
> llvm-svn: 366862
llvm-svn: 366899
Summary:
Testing of caret location in diagnostic message is currently made with
CHECK directive with the following general format:
CHECK: {{^ \^$}}
James Henderson suggested the following would be more readable:
CHECK: {{^}} ^{{$}}
and when whole lines can be matched (as is the case for command-line
testing where error messages do not include path):
CHECK: ^
using the option --match-full-lines.
This commit implements these 2 changes on all existing caret position
tests. It also aligns the caret to the character it is trying to match
in the above line.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64923
> llvm-svn: 366861
llvm-svn: 366898
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
> llvm-svn: 366860
llvm-svn: 366897
This patch removes test/Object/X86/no-start-symbol.test (rewrites
it to use YAML and moves it to llvm-objdump tests folder).
(This test was initially introduced in rL239039, but now there
is no reason to keep the precompiled binary it seems).
DIfferential revision: https://reviews.llvm.org/D65136
llvm-svn: 366896
This patch touches a few test cases:
It removes dtflags.elf-x86-64 binary and elf-dtflags.test.
elf-dtflags.test is excessive because we have the
elf-dynamic-tags.test which test all non-machine specific tags.
It removes testing of --dynamic-table from test\Object\readobj-shared-object.test
(we have the elf-dynamic-tags.test for that), and simplifies this test case.
It moves testing of the headers from readobj-shared-object.test
to elf-file-headers.test.
Adds test/tools/llvm-readobj/elf-file-types.test and test/tools/llvm-readobj/elf-loadname.test.
It opens road for removing the readobj-shared-object.test completely soon.
Differential revision: https://reviews.llvm.org/D65068
llvm-svn: 366895
This is a follow-up refactoring patch for recently
introduced functionality which which reduces the code duplication
and also makes possible to redefine all possible fields of
the first SHT_NULL section (previously it was only possible to set
sh_link and sh_size).
Differential revision: https://reviews.llvm.org/D65140
llvm-svn: 366894
This adds support code for building and shuffling i1 predicate registers. It
generally uses two basic principles, either converting the predicate into an
scalar (through a PREDICATE_CAST) and doing scalar operations on it there, or
by converting the register to an full vector register and back.
Some of the code here is a not super efficient but will hopefully cover most
cases of moving i1 vectors around and can be improved in subsequent patches.
Some code by David Sherwood.
Differential Revision: https://reviews.llvm.org/D65052
llvm-svn: 366890
With a fix of the issue found by UBSan.
Original commit message:
This eliminates a one error untested and
also introduces a error for one more possible case
which lead to crash previously.
Differential revision: https://reviews.llvm.org/D64987
llvm-svn: 366886
This adds the very basics for MVE vector predication, adding integer VCMP and
VSEL instruction support. This is done through predicate registers (MVT::v16i1,
MVT::v8i1, MVT::v4i1), but otherwise using same mechanics as NEON to custom
lower setcc's through ARMISD::VCXX nodes (VCEQ, VCGT, VCEQZ, etc).
An extra VCNE was added, as this can be handled sensibly by MVE's expanded
number of VCMP condition codes. (There are also VCLE and VCLT which are added
later).
VPSEL is also added here, simply selecting on the vselect.
Original code by David Sherwood.
Differential Revision: https://reviews.llvm.org/D65051
llvm-svn: 366885
While combining two loads into a single load, we often need to
reorder the pointer operands for the new load. This reordering was
broken in the cases where there was a chain of values that built up
the pointer.
Differential Revision: https://reviews.llvm.org/D65193
llvm-svn: 366881
This is a cherrypick of D64237 onto llvm/utils/benchmark and
libcxx/utils/google-benchmark.
Differential Revision: https://reviews.llvm.org/D65142
llvm-svn: 366868
This is a follow up to D64971. While we need to insert the deref after
the offset, it needs to come before the remaining elements in the
original expression since the deref needs to happen before the LLVM
fragment if present.
Differential Revision: https://reviews.llvm.org/D65172
llvm-svn: 366865
Copying them is expensive. This allows the tables to be moved around at
lower cost, and allows a remarks::StringTable to be constructed from
a remarks::ParsedStringTable.
llvm-svn: 366864
Summary:
A number of EXPECT statements in FileCheck's unit tests are dependent
from results of other values being tested. This commit changes those
earlier test to use ASSERT instead of EXPECT to avoid cascade errors
when they are all related to the same issue.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64921
llvm-svn: 366862
Summary:
Testing of caret location in diagnostic message is currently made with
CHECK directive with the following general format:
CHECK: {{^ \^$}}
James Henderson suggested the following would be more readable:
CHECK: {{^}} ^{{$}}
and when whole lines can be matched (as is the case for command-line
testing where error messages do not include path):
CHECK: ^
using the option --match-full-lines.
This commit implements these 2 changes on all existing caret position
tests. It also aligns the caret to the character it is trying to match
in the above line.
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: JonChesterfield, rogfer01, hfinkel, kristina, rnk, tra, arichardson, grimar, dblaikie, probinson, llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64923
llvm-svn: 366861
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch lift the restriction for a
numeric expression to either be a variable definition or a numeric
expression to try to match.
This commit allows a numeric variable to be set to the result of the
evaluation of a numeric expression after it has been matched
successfully. When it happens, the variable is allowed to be used on
the same line since its value is known at match time.
It also makes use of this possibility to reuse the parsing code to
parse a command-line definition by crafting a mirror string of the
-D option with the equal sign replaced by a colon sign, e.g. for option
'-D#NUMVAL=10' it creates the string
'-D#NUMVAL=10 (parsed as [[#NUMVAL:10]])' where the numeric expression
is parsed to define NUMVAL. This result in a few tests needing updating
for the location diagnostics on top of the tests for the new feature.
It also enables empty numeric expression which match any number without
defining a variable. This is done here rather than in commit #5 of the
patch series because it requires to dissociate automatic regex insertion
in RegExStr from variable definition which would make commit #5 even
bigger than it already is.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60388
llvm-svn: 366860
We need to be able to load and store s128 for memcpy inlining, where we want to
generate Q register mem ops. Making these legal also requires that we add some
support in other instructions. Regbankselect should also know about these since
they have no GPR register class that can hold them, so need special handling to
live on the FPR bank.
Differential Revision: https://reviews.llvm.org/D65166
llvm-svn: 366857
This exposes better support to use a string table with a format through
an actual new remark::Format, called yaml-strtab.
This can now be used with -fsave-optimization-record=yaml-strtab.
llvm-svn: 366849
Currently PowerPC backend emits code like this:
r3 = li 0
std r3, 264(r1)
r3 = li 0
std r3, 272(r1)
This patch fixes that and other cases where a register already contains a value that is loaded so we will get:
r3 = li 0
std r3, 264(r1)
std r3, 272(r1)
Differential Revision: https://reviews.llvm.org/D64220
llvm-svn: 366840
LegalizeDAG tries to legal the DAG by legalizing nodes before
their operands.
If we create a new node, we end up legalizing it after its operands.
This prevents some of the optimizations that can be done when the
operand is a build_vector since the build_vector will have been
legalized to something else.
Differential Revision: https://reviews.llvm.org/D65132
llvm-svn: 366835
The original code failed to account for the fact that one exit can have a pointer exit count without all of them having pointer exit counts. This could cause two separate bugs:
1) We might exit the loop early, and leave optimizations undone. This is what triggered the assertion failure in the reported test case.
2) We might optimize one exit, then exit without indicating a change. This could result in an analysis invalidaton bug if no other transform is done by the rest of indvars.
Note that the pointer exit counts are a really fragile concept. They show up only when we have a pointer IV w/o a datalayout to provide their size. It's really questionable to me whether the complexity implied is worth it.
llvm-svn: 366829
Summary:
Allow IntToPtrInst to carry !dereferenceable metadata tag.
This is valid since !dereferenceable can be only be applied to
pointer type values.
Change-Id: If8a6e3c616f073d51eaff52ab74535c29ed497b4
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64954
llvm-svn: 366826
Like other ELF targets, shared objects should be linked with -z defs on Solaris.
Tested on x86_64-pc-solaris2.11 and sparcv9-sun-solaris2.11.
Differential Revision: https://reviews.llvm.org/D64484
llvm-svn: 366821
When we select the XRO variants of loads, we can pull in very specific shifts
(of the size of an element). E.g.
```
ldr x1, [x2, x3, lsl #3]
```
This teaches GISel to handle these when they're coming from shifts
specifically.
This adds a new addressing mode function, `selectAddrModeShiftedExtendXReg`
which recognizes this pattern.
This also packs this up with `selectAddrModeRegisterOffset` into
`selectAddrModeXRO`. This is intended to be equivalent to `selectAddrModeXRO`
in AArch64ISelDAGtoDAG.
Also update load-addressing-modes to show that all of the cases here work.
Differential Revision: https://reviews.llvm.org/D65119
llvm-svn: 366819
If all the demanded elts are from one operand and are inline, then we can use the operand directly.
The changes are mainly from SSE41 targets which has blendvpd but not cmpgtq, allowing the v2i64 comparison to be simplified as we only need the signbit from alternate v4i32 elements.
llvm-svn: 366817
llvm-ar outputs a strange error message when handling archives with
members larger than 4GB due to not checking file size when passing the
value as an unsigned 32 bit integer. This overflow issue caused
malformed archives to be created.:
https://bugs.llvm.org/show_bug.cgi?id=38058
This change allows for members above 4GB and will error in a case that
is over the formats size limit, a 10 digit decimal integer.
Differential Revision: https://reviews.llvm.org/D65093
llvm-svn: 366813
