The SelectionDAG bad a special case for ISD::SELECT_CC, where it would
allow targets to specify:
setOperationAction(ISD::SELECT_CC, MVT::Other, Expand);
to indicate that they wanted to expand ISD::SELECT_CC for all types.
This wasn't applied correctly everywhere, and it makes writing new
DAG patterns with ISD::SELECT_CC difficult.
llvm-svn: 210541
The C++ and C semantics of the compare_and_swap operations actually
require us to return a boolean "success" value. In LLVM terms this
means a second comparison of the output of "cmpxchg" against the input
desired value.
However, x86's "cmpxchg" instruction sets all flags for the comparison
formed, so we can skip any secondary comparison. (N.b. this isn't true
for cmpxchg8b/16b, which only set ZF).
rdar://problem/13201607
llvm-svn: 210523
This improves the X86 cost model for small constants with large types. Before
this commit we would even hoist trivial constants such as i96 2.
This is related to <rdar://problem/17070936>
llvm-svn: 210504
This patch adds new target specific combine rules to identify horizontal
add/sub idioms from BUILD_VECTOR dag nodes.
This patch also teaches the DAGCombiner how to canonicalize sequences of
insert_vector_elt dag nodes according to the following rule:
(insert_vector_elt (insert_vector_elt A, I0), I1) ->
(insert_vecto_elt (insert_vector_elt A, I1), I0)
This new canonicalization rule only triggers if the inner insert_vector
dag node has exactly one use; also, both indices must be known constants,
and I1 < I0.
This last rule made it possible to write a simpler algorithm to identify
horizontal add/sub patterns because now we don't have to worry about the
ordering of insert_vector_elt dag nodes.
llvm-svn: 210477
This patch teaches the backend how to check for the 'NoSignedWrap' flag on
binary operations to improve the emission of 'test' instructions.
If the result of a binary operation is known not to overflow we know that
resetting the Overflow flag is unnecessary and so we can avoid emitting
the test instruction.
Patch by Marcello Maggioni.
llvm-svn: 210468
According to Intel Software Optimization Manual
on Silvermont INC or DEC instructions require
an additional uop to merge the flags.
As a result, a branch instruction depending
on an INC or a DEC instruction incurs a 1 cycle penalty.
Differential Revision: http://reviews.llvm.org/D3990
llvm-svn: 210466
X86Subtarget::isTargetCygMing || X86Subtarget::isTargetKnownWindowsMSVC is
equivalent to all Windows environments. Simplify the check to isOSWindows.
NFC.
llvm-svn: 210431
I saw at least a memory leak or two from inspection (on probably
untested error paths) and r206991, which was the original inspiration
for this change.
I ran this idea by Jim Grosbach a few weeks ago & he was OK with it.
Since it's a basically mechanical patch that seemed sufficient - usual
post-commit review, revert, etc, as needed.
llvm-svn: 210427
Summary:
We were being too strict and not accounting for undefs.
Added a test case and fixed another one where we improved codegen.
Reviewers: grosbach, nadav, delena
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4039
llvm-svn: 210361
It includes a pass that rewrites all indirect calls to jumptable functions to pass through these tables.
This also adds backend support for generating the jump-instruction tables on ARM and X86.
Note that since the jumptable attribute creates a second function pointer for a
function, any function marked with jumptable must also be marked with unnamed_addr.
llvm-svn: 210280
When JITting a large project such as Boost it's quite hard to figure out the problematic inline asm without debug location. This patch provides debug location printout before the JIT aborts due to inline asm. printDebugLoc() was exposed from MachineInstr.cpp and reused here.
If the JIT run with debug info, don't bomb on DBG_VALUE but ignore them.
http://reviews.llvm.org/D3416
llvm-svn: 210201
When lowering a ISD::BRCOND into a test+branch, make sure that we
always use the correct condition code to emit the test operation.
This fixes PR19858: "i8 checked mul is wrong on x86".
Patch by Keno Fisher!
llvm-svn: 210032
This patch teaches the backend how to simplify/canonicalize dag node
sequences normally introduced by the backend when promoting certain dag nodes
with illegal vector type.
This patch adds two new combine rules:
1) fold (shuffle (bitcast (BINOP A, B)), Undef, <Mask>) ->
(shuffle (BINOP (bitcast A), (bitcast B)), Undef, <Mask>)
2) fold (BINOP (shuffle (A, Undef, <Mask>)), (shuffle (B, Undef, <Mask>))) ->
(shuffle (BINOP A, B), Undef, <Mask>).
Both rules are only triggered on the type-legalized DAG.
In particular, rule 1. is a target specific combine rule that attempts
to sink a bitconvert into the operands of a binary operation.
Rule 2. is a target independet rule that attempts to move a shuffle
immediately after a binary operation.
llvm-svn: 209930
Summary:
Separate the check for blend shuffle_vector masks into isBlendMask.
This function will also be used to check if a vector shuffle is legal. No
change in functionality was intended, but we ended up improving codegen on
two tests, which were being (more) optimized only if the resulting shuffle
was legal.
Reviewers: nadav, delena, andreadb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3964
llvm-svn: 209923
The corresponding CFE patch replaces these intrinsics with vector initializers
in avxintrin.h. This patch removes the LLVM intrinsics from the backend.
We now stop lowering at X86ISD::VBROADCAST custom node rather than lowering
that further to the intrinsics.
The patch only changes VBROADCASTS* and leaves VBROADCAST[FI]128 to continue
to use intrinsics. As explained in the CFE patch, the reason is that we
currently don't generate as good code for them without the intrinsics.
CodeGen/X86/avx-vbroadcast.ll already provides coverage for this change. It
checks that for a series of insertelements we generate the appropriate
vbroadcast instruction.
Also verified that there was no assembly change in the test-suite before and
after this patch.
llvm-svn: 209864
This matches gcc's behavior. It also seems natural given that aliases
contain other properties that govern how it is accessed (linkage,
visibility, dll storage).
Clang still has to be updated to expose this feature to C.
llvm-svn: 209759
Currently we look at the Aliasee to decide what type of export
directive to use. It seems better to use the type of the alias
directly. This is similar to how we handle the alias having the
same address but other attributes (linkage, visibility) from the
aliasee.
With this patch it is now possible to do things like
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-pc-windows-msvc"
@foo = global [6 x i8] c"\B8*\00\00\00\C3", section ".text", align 16
@f = dllexport alias i32 (), [6 x i8]* @foo
!llvm.module.flags = !{!0}
!0 = metadata !{i32 6, metadata !"Linker Options", metadata !1}
!1 = metadata !{metadata !2, metadata !3}
!2 = metadata !{metadata !"/DEFAULTLIB:libcmt.lib"}
!3 = metadata !{metadata !"/DEFAULTLIB:oldnames.lib"}
llvm-svn: 209600
This patch teaches the x86 backend how to efficiently lower ISD::BITCAST dag
nodes from MVT::f64 to MVT::v4i16 (and vice versa), and from MVT::f64 to
MVT::v8i8 (and vice versa).
This patch extends the logic from revision 208107 to also handle MVT::v4i16
and MVT::v8i8. Also, this patch correctly propagates Undef values when
performing the widening of a vector (example: when widening from v2i32 to
v4i32, the upper 64bits of the resulting vector are 'undef').
llvm-svn: 209451
ISD::VSELECT mask uses 1 to identify the first argument and 0 to identify the
second argument.
On the other hand, BLENDI uses 0 to identify the first argument and 1 to
identify the second argument.
Fix the generation of the blend mask to account for this difference.
The bug did not show up with r209043, because we were not checking for the
actual arguments of the blend instruction!
This commit also fixes the test cases.
Note: The same mask works for the BLENDr variant because the arguments are
swapped during instruction selection (see the BLENDXXrr patterns).
<rdar://problem/16975435>
llvm-svn: 209324
According to Intel Software Optimization Manual on Silvermont in some cases LEA
is better to be replaced with ADD instructions:
"The rule of thumb for ADDs and LEAs is that it is justified to use LEA
with a valid index and/or displacement for non-destructive destination purposes
(especially useful for stack offset cases), or to use a SCALE.
Otherwise, ADD(s) are preferable."
Differential Revision: http://reviews.llvm.org/D3826
llvm-svn: 209198
Currently the X86 backend doesn't support types larger than i128 very well. For
example an i192 multiply will assert in codegen when the 2nd argument is a constant and the constant got hoisted.
This fix changes the cost model to never hoist constants for types larger than
i128. Once the codegen issues have been resolved, the cost model can be updated
to allow also larger types.
This is related to <rdar://problem/16954938>
llvm-svn: 209162
