Summary: In ThinLTO backend compile, OPTOptions are not set so that the ICP in ThinLTO backend does not know if it is a SamplePGO build, in which profile count needs to be annotated directly on call instructions. This patch cleaned up the PGOOptions handling logic and passes down PGOOptions to ThinLTO backend.
Reviewers: chandlerc, tejohnson, davidxl
Reviewed By: chandlerc
Subscribers: sanjoy, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D36052
llvm-svn: 309780
Summary:
As we teach Clang to use ThinkLTO + new PM, it's good for the users to
inject through Config, instead of setting a flag in the LTOBackend
library. Move the flag to llvm-lto2.
As it moves to llvm-lto2, a new name -use-new-pm seems simpler and as
clear.
Reviewers: davide, tejohnson
Subscribers: mehdi_amini, Prazek, inglorion, eraman, chandlerc, llvm-commits
Differential Revision: https://reviews.llvm.org/D33799
llvm-svn: 304492
Based on the original patch by Davide, but I've adjusted the API exposed
to just be different entry points rather than exposing more state
parameters. I've factored all the common logic out so that we don't have
any duplicate pipelines, we just stitch them together in different ways.
I think this makes the build easier to reason about and understand.
This adds a direct method for getting the module simplification pipeline
as well as a method to get the optimization pipeline. While not my
express goal, this seems nice and gives a good place comment about the
restrictions that are imposed on them.
I did make some minor changes to the way the pipelines are structured
here, but hopefully not ones that are significant or controversial:
1) I sunk the PGO indirect call promotion to only be run when we have
PGO enabled (or as part of the special ThinLTO pipeline).
2) I made the extra GlobalOpt run in ThinLTO just happen all the time
and at a slightly more powerful place (before we remove available
externaly functions). This seems like general goodness and not a big
compile time sink, so it didn't make sense to *only* use it in
ThinLTO. Fewer differences in the pipeline makes everything simpler
IMO.
3) I hoisted the ThinLTO stop point pre-link above the the RPO function
attr inference. The RPO inference won't infer anything terribly
meaningful pre-link (recursiveness?) so it didn't make a lot of
sense. But if the placement of RPO inference starts to matter, we
should move it to the canonicalization phase anyways which seems like
a better place for it (and there is a FIXME to this effect!). But
that seemed a bridge too far for this patch.
If we ever need to parameterize these pipelines more heavily, we can
always sink the logic to helper functions with parameters to keep those
parameters out of the public API. But the changes above seemed minor
that we could possible get away without the parameters entirely.
I added support for parsing 'thinlto' and 'thinlto-pre-link' names in
pass pipelines to make it easy to test these routines and play with them
in larger pipelines. I also added a really basic manifest of passes test
that will show exactly how the pipelines behave and work as well as
making updates to them clear.
Lastly, this factoring does introduce a nesting layer of module pass
managers in the default pipeline. I don't think this is a big deal and
the flexibility of decoupling the pipelines seems easily worth it.
Differential Revision: https://reviews.llvm.org/D33540
llvm-svn: 304407
Marking them as used causes them to be considered visible outside of LTO. This
prevents the symbols from being internalized or discarded, either by GlobalDCE
or by summary-based dead stripping in ThinLTO.
This change makes it unnecessary to add these symbols to llvm.compiler.used
in the backend, as the symbols are kept alive by virtue of being external,
so remove the backend code that handles that.
Fixes PR32798.
Differential Revision: https://reviews.llvm.org/D32544
llvm-svn: 301438
Pass const qualified summaries into importers and unqualified summaries into
exporters. This lets us const-qualify the summary argument to thinBackend.
Differential Revision: https://reviews.llvm.org/D31230
llvm-svn: 298534
Summary:
In a .symver assembler directive like:
.symver name, name2@@nodename
"name2@@nodename" should get the same symbol binding as "name".
While the ELF object writer is updating the symbol binding for .symver
aliases before emitting the object file, not doing so when the module
inline assembly is handled by the RecordStreamer is causing the wrong
behavior in *LTO mode.
E.g. when "name" is global, "name2@@nodename" must also be marked as
global. Otherwise, the symbol is skipped when iterating over the LTO
InputFile symbols (InputFile::Symbol::shouldSkip). So, for example,
when performing any *LTO via the gold-plugin, the versioned symbol
definition is not recorded by the plugin and passed back to the
linker. If the object was in an archive, and there were no other symbols
needed from that object, the object would not be included in the final
link and references to the versioned symbol are undefined.
The llvm-lto2 tests added will give an error about an unused symbol
resolution without the fix.
Reviewers: rafael, pcc
Reviewed By: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30485
llvm-svn: 297332
Summary:
Add a field to LTO::Config, CGFileType, to select the file type to emit (object
or assembly). This is useful for testing and to implement -save-temps.
Reviewers: tejohnson, mehdi_amini, pcc
Reviewed By: mehdi_amini
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D29475
llvm-svn: 295226
the latter to the Transforms library.
While the loop PM uses an analysis to form the IR units, the current
plan is to have the PM itself establish and enforce both loop simplified
form and LCSSA. This would be a layering violation in the analysis
library.
Fundamentally, the idea behind the loop PM is to *transform* loops in
addition to running passes over them, so it really seemed like the most
natural place to sink this was into the transforms library.
We can't just move *everything* because we also have loop analyses that
rely on a subset of the invariants. So this patch splits the the loop
infrastructure into the analysis management that has to be part of the
analysis library, and the transform-aware pass manager.
This also required splitting the loop analyses' printer passes out to
the transforms library, which makes sense to me as running these will
transform the code into LCSSA in theory.
I haven't split the unittest though because testing one component
without the other seems nearly intractable.
Differential Revision: https://reviews.llvm.org/D28452
llvm-svn: 291662
Summary:
When reading the metadata bitcode, create a type declaration when
possible for composite types when we are importing. Doing this in
the bitcode reader saves memory. Also it works naturally in the case
when the type ODR map contains a definition for the same composite type
because it was used in the importing module (buildODRType will
automatically use the existing definition and not create a type
declaration).
For Chromium built with -g2, this reduces the aggregate size of the
generated native object files by 66% (from 31G to 10G). It reduced
the time through the ThinLTO link and backend phases by about 20% on
my machine.
Reviewers: mehdi_amini, dblaikie, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27775
llvm-svn: 289993
Summary: ThinLTO needs to invoke SampleProfileLoader pass during link time in order to annotate profile correctly after module importing.
Reviewers: davidxl, mehdi_amini, tejohnson
Subscribers: pcc, davide, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D27790
llvm-svn: 289957
Also, udpate the ~60 failing tests in the tree which did
not contain a valid datalayout.
This fixes PR31123. lld will be updated in a following patch,
immediately after this is committed.
Differential Revision: https://reviews.llvm.org/D27082
llvm-svn: 289719
This class represents a symbol table built from in-memory IR. It provides
access to GlobalValues and should only be used if such access is required
(e.g. in the LTO implementation). We will eventually change IRObjectFile
to read from a bitcode symbol table rather than using ModuleSymbolTable,
so it would not be able to expose the module.
Differential Revision: https://reviews.llvm.org/D27073
llvm-svn: 288319
Summary:
Split ReaderWriter.h which contains the APIs into both the BitReader and
BitWriter libraries into BitcodeReader.h and BitcodeWriter.h.
This is to address Chandler's concern about sharing the same API header
between multiple libraries (BitReader and BitWriter). That concern is
why we create a single bitcode library in our downstream build of clang,
which led to r286297 being reverted as it added a dependency that
created a cycle only when there is a single bitcode library (not two as
in upstream).
Reviewers: mehdi_amini
Subscribers: dlj, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D26502
llvm-svn: 286566
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
Unique ownership is just one possible ownership pattern for the memory buffer
underlying the bitcode reader. In practice, as this patch shows, ownership can
often reside at a higher level. With the upcoming change to allow multiple
modules in a single bitcode file, it will no longer be appropriate for
modules to generally have unique ownership of their memory buffer.
The C API exposes the ownership relation via the LLVMGetBitcodeModuleInContext
and LLVMGetBitcodeModuleInContext2 functions, so we still need some way for
the module to own the memory buffer. This patch does so by adding an owned
memory buffer field to Module, and using it in a few other places where it
is convenient.
Differential Revision: https://reviews.llvm.org/D26384
llvm-svn: 286214
The NativeObjectOutput class has a design problem: it mixes up the caching
policy with the interface for output streams, which makes the client-side
code hard to follow and would for example make it harder to replace the
cache implementation in an arbitrary client.
This change separates the two aspects by moving the caching policy
to a separate field in Config, replacing NativeObjectOutput with a
NativeObjectStream class which only deals with streams and does not need to
be overridden by most clients and introducing an AddFile callback for adding
files (e.g. from the cache) to the link.
Differential Revision: https://reviews.llvm.org/D24622
llvm-svn: 282299
Add the ability to plug a cache on the LTO API.
I tried to write such that a linker implementation can
control the cache backend. This is intrusive and I'm
not totally happy with it, but I can't figure out a
better design right now.
Differential Revision: https://reviews.llvm.org/D23599
llvm-svn: 279576
An important performance setting on the LLVMContext for LTO is
enableDebugTypeODRUniquing(), this adds an automatic merging of
debug information in the context based on type ids.
Also, the lto::Config includes a diagnostic handler that needs to
be set on the Context, as well as the setDiscardValueNames() setting.
llvm-svn: 279532
It use to be non-const for the sole purpose of custom handling of
commons symbol. This is moved now in the regular LTO handling now
and such we can constify the callback.
llvm-svn: 279438
Summary:
This was reversed compared to ThinLTOCodeGenerator for some reason,
and lead to an increased code-size on my tests. I figured that the
weak resolution may internalize a linkonce function, which will be
promoted immediately (and renamed), before being internalized again.
Reviewers: tejohnson
Subscribers: pcc, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23632
llvm-svn: 279021
Summary:
It does not play well with directories (end up with a bunch of hidden
files).
Also, do not strip the 0 suffix for the first task, especially since
0 can be used by ThinLTO as well now.
Reviewers: tejohnson
Subscribers: mehdi_amini, pcc, llvm-commits
Differential Revision: https://reviews.llvm.org/D23612
llvm-svn: 279014
Summary:
While NFC for now, this will allow more flexibility on the client side
to hold state necessary to back up the stream.
Also when adding caching, this class will grow in complexity.
Note I blindly modified the gold-plugin as I can't compile it.
Reviewers: tejohnson
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D23542
llvm-svn: 278907
This restores commit r278330, with fixes for a few bot failures:
- Fix a late change I had made to the save temps output file that I
missed due to existing files sitting on my disk
- Fix a bunch of Windows bot failures with "ambiguous call to overloaded
function" due to confusion between llvm::make_unique vs
std::make_unique (preface the new make_unique calls with "llvm::")
- Attempt to fix a modules bot failure by adding a missing include
to LTO/Config.h.
Original change:
Resolution-based LTO API.
Summary:
This introduces a resolution-based LTO API. The main advantage of this API over
existing APIs is that it allows the linker to supply a resolution for each
symbol in each object, rather than the combined object as a whole. This will
become increasingly important for use cases such as ThinLTO which require us
to process symbol resolutions in a more complicated way than just adjusting
linkage.
Patch by Peter Collingbourne.
Reviewers: rafael, tejohnson, mehdi_amini
Subscribers: lhames, tejohnson, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D20268
llvm-svn: 278338
This reverts commit r278330.
I made a change to the save temps output that is causing issues with the
bots. Didn't realize this because I had older output files sitting on
disk in my test output directory.
llvm-svn: 278331
