A Thumb-2 post-indexed LDR instruction such as:
ldr.w r0, [r1], #4
Can be rewritten as:
ldm.n r1!, {r0}
LDMs can be more expensive than LDRs on some cores, so this has been enabled only in minsize mode.
llvm-svn: 272002
If we have an LDM that uses only low registers and doesn't write to its base register:
ldm.w r0, {r1, r2, r3}
And that base register is dead after the LDM, then we can convert it to writeback form and use a narrow encoding:
ldm.n r0!, {r1, r2, r3}
Obviously, this introduces a new register write and so can cause WAW hazards, so I've enabled it only in minsize mode. This is a code size trick that ARM Compiler 5 ("armcc") does that we don't.
llvm-svn: 272000
SHT_GNU_verneed (.gnu.version_r) is a version dependency section.
It was the last symbol versioning relative section that was not dumped,
now it is.
Differential revision: http://reviews.llvm.org/D21024
llvm-svn: 271998
The Thumb2 conditional branch B<cond>.W has a different encoding (T3)
to the unconditional branch B.W (T4) as it needs to record <cond>.
As the encoding is different the B<cond>.W is given a different
relocation type.
ELF for the ARM Architecture 4.6.1.6 (Table-13) states that
R_ARM_THM_JUMP19 should be used for B<cond>.W. At present the
MC layer is using the R_ARM_THM_JUMP24 from B.W.
This change makes B<cond>.W use R_ARM_THM_JUMP19 and alters the
existing test that checks for R_ARM_THM_JUMP24 to expect
R_ARM_THM_JUMP19.
llvm-svn: 271997
Unlike native shifts, the AVX2 per-element shift instructions VPSRAV/VPSRLV/VPSLLV handle out of range shift values (logical shifts set the result to zero, arithmetic shifts splat the sign bit).
If the shift amount is constant we can sometimes convert these instructions to native shifts:
1 - if all shift amounts are in range then the conversion is trivial.
2 - out of range arithmetic shifts can be clamped to the (bitwidth - 1) (a legal shift amount) before conversion.
3 - logical shifts just return zero if all elements have out of range shift amounts.
In addition, UNDEF shift amounts are handled - either as an UNDEF shift amount in a native shift or as an UNDEF in the logical 'all out of range' zero constant special case for logical shifts.
Differential Revision: http://reviews.llvm.org/D19675
llvm-svn: 271996
This patch adds support for folding undef/zero/constant inputs to MOVMSK instructions.
The SSE/AVX versions can be fully folded, but the MMX version can only handle undef inputs.
Differential Revision: http://reviews.llvm.org/D20998
llvm-svn: 271990
take into account modernizations in r246002 and r270381.
Patch based on http://reviews.llvm.org/D20954 by Miroslav Hrncir.
Thanks Miroslav!
llvm-svn: 271985
In order to efficiently write PDBs, we need to be able to make a
StreamWriter class similar to a StreamReader, which can transparently deal
with writing to discontiguous streams, and we need to use this for all
writing, similar to how we use StreamReader for all reading.
Most discontiguous streams are the typical numbered streams that appear in
a PDB file and are described by the directory, but the exception to this,
that until now has been parsed by hand, is the directory itself.
MappedBlockStream works by querying the directory to find out which blocks
a stream occupies and various other things, so naturally the same logic
could not possibly work to describe the blocks that the directory itself
resided on.
To solve this, I've introduced an abstraction IPDBStreamData, which allows
the client to query for the list of blocks occupied by the stream, as well
as the stream length. I provide two implementations of this: one which
queries the directory (for indexed streams), and one which queries the
super block (for the directory stream).
This has the side benefit of vastly simplifying the code to parse the
directory. Whereas before a mini state machine was rolled by hand, now we
simply use FixedStreamArray to read out the stream sizes, then build a
vector of FixedStreamArrays for the stream map, all in just a few lines of
code.
Reviewed By: ruiu
Differential Revision: http://reviews.llvm.org/D21046
llvm-svn: 271982
TLS access requires an offset from the TLS index. The index itself is the
section-relative distance of the symbol. For ARM, the relevant relocation
(IMAGE_REL_ARM_SECREL) is applied as a constant. This means that the value may
not be an immediate and must be lowered into a constant pool. This offset will
not be base relocated. We were previously emitting the actual address of the
symbol which would be base relocated and would therefore be the vaue offset by
the ImageBase + TLS Offset.
llvm-svn: 271974
Summary:
This is an initial implementation of a Hardened Allocator based on Sanitizer Common's CombinedAllocator.
It aims at mitigating heap based vulnerabilities by adding several features to the base allocator, while staying relatively fast.
The following were implemented:
- additional consistency checks on the allocation function parameters and on the heap chunks;
- use of checksum protected chunk header, to detect corruption;
- randomness to the allocator base;
- delayed freelist (quarantine), to mitigate use after free and overall determinism.
Additional mitigations are in the works.
Reviewers: eugenis, aizatsky, pcc, krasin, vitalybuka, glider, dvyukov, kcc
Subscribers: kubabrecka, filcab, llvm-commits
Differential Revision: http://reviews.llvm.org/D20084
llvm-svn: 271968
This reverts commit r271962 and reinstantes r271957.
MSVC's linker doesn't appear to like it if you have an empty symbol
substream, so only open a symbol substream if we're going to emit
something about globals into it.
Makes check-asan pass.
llvm-svn: 271965
scalarizePHI only looked for phis that have exactly two uses - the "latch"
use, and an extract. Unfortunately, we can not assume all equivalent extracts
are CSE'd, since InstCombine itself may create an extract which is a duplicate
of an existing one. This extends it to handle several distinct extracts from
the same index.
This should fix at least some of the performance regressions from PR27988.
Differential Revision: http://reviews.llvm.org/D20983
llvm-svn: 271961
Arrange to call verify(Function &) on each function, followed by
verify(Module &), whether the verifier is being used from the pass or
from verifyModule(). As a side effect, this fixes an issue that caused
us not to call verify(Function &) on unmaterialized functions from
verifyModule().
Differential Revision: http://reviews.llvm.org/D21042
llvm-svn: 271956
Changes since the initial commit:
- Normalize file paths read from the file to prevent Windows path
separators from escaping parts of the path.
- Since we need to store the normalized file paths in WeightedFile,
don't do tricky things to keep the source MemoryBuffer alive.
- Don't use list-initialization for a std::string in WeightedFile.
Differential Revision: http://reviews.llvm.org/D20980
llvm-svn: 271953
Changes since the initial commit:
- Normalize file paths read from the file to prevent Windows path
separators from escaping parts of the path.
- Since we need to store the normalized file paths in WeightedFile,
don't do tricky things to keep the source MemoryBuffer alive.
Differential Revision: http://reviews.llvm.org/D20980
llvm-svn: 271949
Remove previously unreachable code that verifies that a function definition has
an entry block. By definition, a function definition has at least one block.
llvm-svn: 271948
This is the simplest possible patch to get some kind of YAML
output. All it dumps is the MSF header fields so that in
theory an empty MSF file could be reconstructed.
Reviewed By: ruiu, majnemer
Differential Revision: http://reviews.llvm.org/D20971
llvm-svn: 271939
Calls to this function are currently injected by the
``SanitizerCoverageModule`` pass when the both the ``indirect-calls``
and ``trace-pc`` sanitizer coverage options are enabled and the code
being instrumented has indirect calls. Previously because LibFuzzer did
not define this function this would lead to link errors when building
some of the tests on OSX.
Differential Revision: http://reviews.llvm.org/D20946
llvm-svn: 271938
In some cases, when simplifying with SCEV, we might consider pointer values as
just usual integer values. Thus, we might get a different type from what we
had originally in the map of simplified values, and hence we need to check
types before operating on the values.
This fixes PR28015.
llvm-svn: 271931
Summary:
Fix LSRInstance::HoistInsertPosition() to check the original insert
position block first for a canonical insertion point that is dominated
by all inputs. This leads to SCEV being able to reuse more instructions
since it currently tracks the instructions it creates for reuse by
keeping a table of <Value, insert point> pairs.
Originally reviewed in http://reviews.llvm.org/D18001
Reviewers: atrick
Subscribers: llvm-commits, mzolotukhin, mcrosier
Differential Revision: http://reviews.llvm.org/D18480
llvm-svn: 271929
The data strucutre in the new FPO stream is described in the
PE/COFF spec. There is one record per function if frame pointer
is omitted.
Differential Revision: http://reviews.llvm.org/D20999
llvm-svn: 271926
The code layout that TailMerging (inside BranchFolding) works on is not the
final layout optimized based on the branch probability. Generally, after
BlockPlacement, many new merging opportunities emerge.
This patch calls Tail Merging after MBP and calls MBP again if Tail Merging
merges anything.
Differential Revision: http://reviews.llvm.org/D20276
llvm-svn: 271925
