Summary:
The class wraps a uint64_t and an enum to represent the type of profile
count (real and synthetic) with some helper methods.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41883
llvm-svn: 322771
Summary:
Discovered while working on a patch to move alignment in
@llvm.memcpy/move/set from an arg into parameter attributes.
The current implementations of AttributeSet::removeAttribute() and
AttributeList::removeAttribute crash when attempting to remove the
alignment attribute. Currently, these implementations add the
to-be-removed attributes to an AttrBuilder and then remove
the builder from the list/set. Alignment is special in that it
must be added to a builder with an integer value for the alignment;
attempts to add alignment to a builder without a value is an error.
This change fixes the removeAttribute implementations for AttributeSet and
AttributeList to make them able to remove the alignment, and other similar,
attributes.
Reviewers: rnk, chandlerc, pete, javed.absar, reames
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41951
llvm-svn: 322735
With my bad luck I separately implemented the DomTree preservation
for ConstantFoldTerminator before r322401 was committed. Commit the
tests which I think still provide some value.
llvm-svn: 322683
Summary: Not sure this needs a review or not. Erring on the safe side.
Reviewers: dblaikie
Differential Revision: https://reviews.llvm.org/D41666
llvm-svn: 322538
Summary:
See D37528 for a previous (non-deferred) version of this
patch and its description.
Preserves dominance in a deferred manner using a new class
DeferredDominance. This reduces the performance impact of
updating the DominatorTree at every edge insertion and
deletion. A user may call DDT->flush() within JumpThreading
for an up-to-date DT. This patch currently has one flush()
at the end of runImpl() to ensure DT is preserved across
the pass.
LVI is also preserved to help subsequent passes such as
CorrelatedValuePropagation. LVI is simpler to maintain and
is done immediately (not deferred). The code to perform the
preversation was minimally altered and simply marked as
preserved for the PassManager to be informed.
This extends the analysis available to JumpThreading for
future enhancements such as threading across loop headers.
Reviewers: dberlin, kuhar, sebpop
Reviewed By: kuhar, sebpop
Subscribers: mgorny, dmgreen, kuba, rnk, rsmith, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40146
llvm-svn: 322401
Planning to add support for named vregs. This puts is in a conundrum since
physregs are named as well. To rectify this we need to use a sigil other than
'%' for physregs in MIR. We've settled on using '$' for physregs but first we
must repurpose it from external symbols using it, which is what this commit is
all about. We think '&' will have familiar semantics for C/C++ users.
llvm-svn: 322146
version being used on some of the green dragon builders (plus a clang-format).
Workaround: AsynchronousSymbolQuery and VSO want to work with
JITEvaluatedSymbols anyway, so just use them (instead of JITSymbol, which
happens to tickle the bug).
The libcxx bug being worked around was fixed in r276003, and there are plans to
update the offending builders.
llvm-svn: 322140
Summary:
https://reviews.llvm.org/rL321877 introduced the `OptTable::findNearest`
method, to find the closest edit distance option for a given string.
However, the implementation contained a bug: for a typo `-foo` with an
edit distance of 1 away from a valid option `--foo`, `findNearest`
would suggest a nearby option of `foo`. That is, the result would not
include the `--` prefix, and so was not a valid option.
Fix the bug by ensuring that the prefix string is initialized to one of
the valid prefixes for the option.
Test Plan: `check-llvm-unit`
Reviewers: v.g.vassilev, teemperor, ruiu, jroelofs, yamaguchi
Reviewed By: jroelofs
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41873
llvm-svn: 322109
This change adds the missing armv8l variant as an alias of armv8 architecture.
The issue was observed with several regressions in validation on armv8l
hardware (for instance ExecutionEngine/frem.ll failed due to lack of neon fpu).
Tested with regression testsuite passed without regression on ARM and x86_64.
Patch by Yvan Roux.
Reviewers: rengolin, rogfer01, olista01, fhahn
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D41859
llvm-svn: 322098
Summary:
The idea is that it would replace
(non-Writable)MemoryBuffer::getNewMemBuffer, which is quite useless
unless you const_cast its contents to write to it (which all (both)
callers of this function were doing). This patch also fixes one of the usages in
COFFWriter. After fixing the other usage in clang, I plan to delete the old
function.
Reviewers: dblaikie, Bigcheese
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41540
llvm-svn: 322094
SCEV tracks the correspondence of created SCEV to original instruction.
However during creation of SCEV it is possible that nuw/nsw/exact flags are
lost.
As a result during expansion of the SCEV the instruction with nuw/nsw/exact
will be used where it was expected and we produce poison incorreclty.
Reviewers: sanjoy, mkazantsev, sebpop, jbhateja
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41578
llvm-svn: 322058
We have some code to try to determine how many pieces an MSF
Free Page Map is split into, and this code had an off by one
error which would cause the calculation to be incorrect when
there were exactly 4096*k + 1 blocks in an MSF file.
Original investigation and patch outline by Colden Cullen.
Differential Revision: https://reviews.llvm.org/D41742
llvm-svn: 321880
Summary:
Add a method `OptTable::findNearest`, which allows users of OptTable to
check user input for misspelled options. In addition, have llvm-mt
check for misspelled options. For example, if a user invokes
`llvm-mt /oyt:foo`, the error message will indicate that while an
option named `/oyt:` does not exist, `/out:` does.
The method ports the functionality of the `LookupNearestOption` method
from LLVM CommandLine to libLLVMOption. This allows tools like Clang
and Swift, which do not use CommandLine, to use this functionality to
suggest similarly spelled options.
As room for future improvement, the new method as-is cannot yet properly suggest
nearby "joined" options -- that is, for an option string "-FozBar", where
"-Foo" is the correct option name and "Bar" is the value being passed along
with the misspelled option, this method will calculate an edit distance of 4,
by deleting "Bar" and changing "z" to "o". It should instead calculate an edit
distance of just 1, by changing "z" to "o" and recognizing "Bar" as a
value. This commit includes a disabled test that expresses this limitation.
Test Plan: `check-llvm`
Reviewers: yamaguchi, v.g.vassilev, teemperor, ruiu, jroelofs
Reviewed By: jroelofs
Subscribers: jroelofs, llvm-commits
Differential Revision: https://reviews.llvm.org/D41732
llvm-svn: 321877
The original commit broke the builders due to a think-o in an assertion:
AsynchronousSymbolQuery's constructor needs to check the callback member
variables, not the constructor arguments.
llvm-svn: 321853
SymbolSource.
These new APIs are a first stab at tackling some current shortcomings of ORC,
especially in performance and threading support.
VSO (Virtual Shared Object) is a symbol table representing the symbol
definitions of a set of modules that behave as if they had been statically
linked together into a shared object or dylib. Symbol definitions, either
pre-defined addresses or lazy definitions, can be added and queries for symbol
addresses made. The table applies the same linkage strength rules that static
linkers do when constructing a dylib or shared object: duplicate definitions
result in errors, strong definitions override weak or common ones. This class
should improve symbol lookup speed by providing centralized symbol tables (as
compared to the findSymbol implementation in the in-tree ORC layers, which
maintain one symbol table per object file / module added).
AsynchronousSymbolQuery is a query for the addresses of a set of symbols.
Query results are returned via a callback once they become available. Querying
for a set of symbols, rather than one symbol at a time (as the current lookup
scheme does) the JIT has the opportunity to make better use of available
resources (e.g. by spawning multiple jobs to materialize the requested symbols
if possible). Returning results via a callback makes queries asynchronous, so
queries from multiple threads of JIT'd code can proceed simultaneously.
SymbolSource represents a source of symbol definitions. It is used when
adding lazy symbol definitions to a VSO. Symbol definitions can be materialized
when needed or discarded if a stronger definition is found. Materializing on
demand via SymbolSources should (eventually) allow us to remove the lazy
materializers from JITSymbol, which will in turn allow the removal of many
current error checks and reduce the number of RPC round-trips involved in
materializing remote symbols. Adding a discard function allows sources to
discard symbol definitions (or mark them as available_externally), reducing the
amount of redundant code generated by the JIT for ODR symbols.
llvm-svn: 321838
This test fails when run on the sanitizer bot, and I do not see a good
way to fix it. The existing bogus target in MachineInstrTest.cpp is only
good enough to create instructions but not sufficient to insert them into
basic blocks. The addNodeToList ilist callback dereferences the pointer
to the MachineRegisterInfo. Adding MachineRegisterInfo would also require
TargetRegisterInfo, even a minimal implementation of that would be quite
complicated. I would be glad to add this back if someone can suggest a
better way to do it.
llvm-svn: 321784
Add iterator ranges for machine instruction phis, similar to the IR-level
phi ranges added in r303964. I updated a few places to use this. Besides
general code simplification, this change will allow removing a non-upstream
change from Swift's copy of LLVM (in a better way than my previous attempt
in http://reviews.llvm.org/D19080).
https://reviews.llvm.org/D41672
llvm-svn: 321783
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
Configuration file is read as a response file in which file names in
the nested constructs `@file` are resolved relative to the directory
where the including file resides. Lines in which the first non-whitespace
character is '#' are considered as comments and are skipped. Trailing
backslashes are used to concatenate lines in the same way as they
are used in shell scripts.
Differential Revision: https://reviews.llvm.org/D24926
llvm-svn: 321586
Configuration file is read as a response file in which file names in
the nested constructs `@file` are resolved relative to the directory
where the including file resides. Lines in which the first non-whitespace
character is '#' are considered as comments and are skipped. Trailing
backslashes are used to concatenate lines in the same way as they
are used in shell scripts.
Differential Revision: https://reviews.llvm.org/D24926
llvm-svn: 321580
InsertBinop tries to find an appropriate instruction instead of
creating a new instruction. When it checks whether instruction is
the same as we need to create it ignores nuw/nsw/exact flags.
It leads to invalid behavior when poison instruction can be used
when it was not expected. Specifically, for example Expander
expands the SCEV built for instruction
%a = add i32 %v, 1
It is possible that InsertBinop can find an instruction
% b = add nuw nsw i32 %v, 1
and will use it instead of version w/o nuw nsw.
It is incorrect.
The patch conservatively ignores all instructions with any of
poison flags installed.
Reviewers: sanjoy, mkazantsev, sebpop, jbhateja
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41576
llvm-svn: 321475
There is nothing useful that can be done with a read-only uninitialized
buffer without const_casting its contents to initialize it. A better
solution is to obtain a writable buffer
(WritableMemoryBuffer::getNewUninitMemBuffer), and then convert it to a
read-only buffer after initialization. All callers of this function have
already been updated to do this, so this function is now unused.
llvm-svn: 321257
rL319838 introduced SymbolStringPool which uses 8 byte atomics for
reference counters. On systems which do not support such atomics
natively such as MIPS32, explicitly add libatomic as one of the
libraries for SymbolStringPool's unittest.
Reviewers: lhames, beanz
Differential Revision: https://reviews.llvm.org/D41010
llvm-svn: 321225
Summary:
This fixes a crash when invalid -march options like `armv` are provided.
Based on a patch by Will Lovett.
Reviewers: rengolin, samparker, mcrosier
Reviewed By: samparker
Subscribers: aemerson, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41429
llvm-svn: 321166
Work towards the unification of MIR and debug output by refactoring the
interfaces.
Also add support for printing with a null TargetIntrinsicInfo and no
MachineFunction.
llvm-svn: 321111
Work towards the unification of MIR and debug output by refactoring the
interfaces.
Before this patch we printed "<call frame instruction>" in the debug
output.
llvm-svn: 321084
Summary:
The motivation here is LLDB, where we need to fixup relocations in
mmapped files before their contents can be read correctly. The
MemoryBuffer class does exactly what we need, *except* that it maps the
file in read-only mode.
WritableMemoryBuffer reuses the existing machinery for opening and
mmapping a file. The only difference is in the argument to the
mapped_file_region constructor -- we create a private copy-on-write
mapping, so that we can make changes to the mapped data, but the changes
aren't carried over to the underlying file.
This patch is based on an initial version by Zachary Turner.
Reviewers: mehdi_amini, rnk, rafael, dblaikie, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40291
llvm-svn: 321071
The method IEEEFloat::convertFromStringSpecials() does not recognize
the "+Inf" and "-Inf" strings but these strings are printed for
the double Infinities by the IEEEFloat::toString().
This patch adds the "+Inf" and "-Inf" strings to the list of recognized
patterns in IEEEFloat::convertFromStringSpecials().
Re-landing after fix.
Reviewers: sberg, bogner, majnemer, timshen, rnk, skatkov, gottesmm, bkramer, scanon, anna
Reviewed By: anna
Subscribers: mkazantsev, FlameTop, llvm-commits, reames, apilipenko
Differential Revision: https://reviews.llvm.org/D38030
llvm-svn: 321054
Adds missing support for DW_FORM_data16.
Update of r320852/r320886, fixing the unittest again, this time use a
raw char string for the test data.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 321011
LLVM IR function names which disable mangling start with '\01'
(https://www.llvm.org/docs/LangRef.html#identifiers).
When an identifier like "\01@abc@" gets dumped to MIR, it is quoted, but
only with single quotes.
http://www.yaml.org/spec/1.2/spec.html#id2770814:
"The allowed character range explicitly excludes the C0 control block
allowed), the surrogate block #xD800-#xDFFF, #xFFFE, and #xFFFF."
http://www.yaml.org/spec/1.2/spec.html#id2776092:
"All non-printable characters must be escaped.
[...]
Note that escape sequences are only interpreted in double-quoted scalars."
This patch adds support for printing escaped non-printable characters
between double quotes if needed.
Should also fix PR31743.
Differential Revision: https://reviews.llvm.org/D41290
llvm-svn: 320996
Extend the ConstantRange implementation to compute the range of possible values resulting from an arithmetic right shift operation.
There will be a follow up patch to leverage this constant range infrastructure in LazyValueInfo.
Patch by Surya Kumari Jangala!
Differential Revision: https://reviews.llvm.org/D40881
llvm-svn: 320976
When unsafe algerbra is allowed calls to cabs(r) can be replaced by:
sqrt(creal(r)*creal(r) + cimag(r)*cimag(r))
Patch by Paul Walker, thanks!
Differential Revision: https://reviews.llvm.org/D40069
llvm-svn: 320901
