Added support for dwordx3 for most load/store types, but not DS, and not
intrinsics yet.
SI (gfx6) does not have dwordx3 instructions, so they are not enabled
there.
Some of this patch is from Matt Arsenault, also of AMD.
Differential Revision: https://reviews.llvm.org/D58902
Change-Id: I913ef54f1433a7149da8d72f4af54dbb13436bd9
llvm-svn: 356659
Added subtarget features for AArch64 to use TPIDR_EL[1|2|3] as the TLS base
register, rather than the default TPIDR_EL0.
Patch by Philip Derrin!
Differential revision: https://reviews.llvm.org/D54685
llvm-svn: 356657
CMPXCHG8B was introduced on i586/pentium generation.
If its not enabled, limit the atomic width to 32 bits so the AtomicExpandPass will expand to lib calls. Unclear if we should be using a different limit for other configs. The default is 1024 and experimentation shows that using an i256 atomic will cause a crash in SelectionDAG.
Differential Revision: https://reviews.llvm.org/D59576
llvm-svn: 356631
Summary:
llvm-objdump (via libObject) validates DYLD_INFO rebase and bind
entries against the basic structure found in the Mach-O file before
evaluating the contents of those entries. Certain malformed Mach-Os can
defeat the validation check and force llvm-objdump (libObject) to crash.
The previous logic verified a rebase or bind started in a valid Mach-O
section, but did not verify that the section wholely contained the
fixup. It also generally allows rebases or binds to start immediately
after a valid section even if that range is not itself part of a valid
section. Finally, bind and rebase opcodes that indicate more than one
fixup (apply N times...) are not completely validated: only the first
and final fixups are checked.
The previous logic also rejected certain binaries as false positives.
Some bind and rebase opcodes can modify the state machine such that the
next bind or rebase will fail. libObject will reject these opcodes as
invalid in order to be helpful and print an error message associated
with the instruction that caused the problem, even though the binary is
not actually illegal until it consumes the invalid state in the state
machine. In other words, libObject may reject a Mach-O binary that
Apple's dynamic linker may consider legal. The original version of
macho-rebase-add-addr-uleb-too-big is an example of such a binary.
I have replaced the existing checkSegAndOffset and checkCountAndSkip
functions with a single function, checkSegAndOffsets, which validates
all of the fixups realized by a DYLD_INFO opcode. checkSegAndOffsets
verifies that a Mach-O section fully contains each fixup. Every fixup
realized by an opcode is validated, and some (but not all!)
inconsistencies in the state machine are allowed until a fixup is
realized. This means that libObject may fail on an opcode that realizes
a fixup, not on the opcode that introduced the arithmetic error.
Existing test cases have been modified to reflect the changes in error
messages returned by libObject. What's more, the test case for
macho-rebase-add-addr-uleb-too-big has been modified so that it actually
triggers the error condition; the new code in libObject considers the
original test binary "legal".
rdar://47797757
Reviewers: lhames, pete, ab
Reviewed By: pete
Subscribers: rupprecht, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59574
llvm-svn: 356629
My previous fix rL356591 "[AMDGPU] Added MsgPack format PAL metadata"
accidentally caused a spurious PAL metadata .note record to be emitted
for any AMDGPU output. That caused failures in the lld test
amdgpu-relocs.s. Fixed.
Differential Revision: https://reviews.llvm.org/D59613
Change-Id: Ie04a2aaae890dcd490f22c89edf9913a77ce070e
llvm-svn: 356621
Machine DCE cannot remove a dead definition if there are non-dbg uses.
A use however can be in the same instruction:
dead %0 = INST %0
Such instructions sometimes created by Detect dead lanes pass.
Allow this instruction to be deleted despite the use if the only use
belongs to the same instruction.
Differential Revision: https://reviews.llvm.org/D59565
llvm-svn: 356619
This patch enables the use of lowerShuffleAsBitMask for 512-bit blends before
falling back to move immedate, GPR to k-register, and masked op.
I had to make some changes to support v8i64 when i64 is not a legal type. And to
support floating point types.
This trades a load for the move immediate and GPR move which is higher latency.
But its probably better for register pressure not having to hop through other
register classes. The load+and should play better with LICM and
rematerialization I think.
Differential Revision: https://reviews.llvm.org/D59479
llvm-svn: 356618
The constantness shouldn't change the register bank choice. We also
don't need to restrict this to only indexing VGPRs, since it's
possible to index SGPRs (but SelectionDAG made using this
difficult). Allow directly indexing SGPRs when appropriate.
llvm-svn: 356611
Summary:
Implements a new target features section in assembly and object files
that records what features are used, required, and disallowed in
WebAssembly objects. The linker uses this information to ensure that
all objects participating in a link are feature-compatible and records
the set of used features in the output binary for use by optimizers
and other tools later in the toolchain.
The "atomics" feature is always required or disallowed to prevent
linking code with stripped atomics into multithreaded binaries. Other
features are marked used if they are enabled globally or on any
function in a module.
Future CLs will add linker flags for ignoring feature compatibility
checks and for specifying the set of allowed features, implement using
the presence of the "atomics" feature to control the type of memory
and segments in the linked binary, and add front-end flags for
relaxing the linkage policy for atomics.
Reviewers: aheejin, sbc100, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, mgrang, jfb, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59173
llvm-svn: 356610
Summary:
- Should use `targetconstant` instead of `constant` operand for clamp
bit, which is expected as an immediate operand. Under certain
conditions, such as a common `i1 false` constant is used in other
place and selected before the instruction with clamp bit, register
operand may be added instead of immediate one. Use `targetcosntant` to
enforce that.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59608
llvm-svn: 356608
This takes sequences like "mov r4, sp; str r0, [r4]", and optimizes them
to something like "str r0, [sp]".
For regular stack variables, this optimization was already implemented:
we lower loads and stores using frame indexes, which are expanded later.
However, when constructing a call frame for a call with more than four
arguments, the existing optimization doesn't apply. We need to use
stores which are actually relative to the current value of sp, and don't
have an associated frame index.
This patch adds a special case to handle that construct. At the DAG
level, this is an ISD::STORE where the address is a CopyFromReg from SP
(plus a small constant offset).
This applies only to Thumb1: in Thumb2 or ARM mode, a regular store
instruction can access SP directly, so the COPY gets eliminated by
existing code.
The change to ARMDAGToDAGISel::SelectThumbAddrModeSP is a related
cleanup: we shouldn't pretend that it can select anything other than
frame indexes.
Differential Revision: https://reviews.llvm.org/D59568
llvm-svn: 356601
Summary:
When linking two llvm.used arrays, if the resulting merged
array ends up with duplicated elements (with the same name) but with
different types, the IRLinker was crashing. This was supposed to be
legal, as the IRLinker bitcasts elements to match types in these
situations.
This bug was exposed by D56928 in clang to support attribute used
in member functions of class templates. Crash happened when self-hosting
with LTO. Since LLVM depends on attribute used to generate code
for the dump() method, ubiquitous in the code base, many input bc
had a definition of this method referenced in their llvm.used array.
Some of these classes got optimized, changing the type of the first
parameter (this) in the dump method, leading to a scenario with a
pool of valid definitions but some with a different type, triggering
this bug.
This is a memory bug: ValueMapper depends on (calls) the materializer
provided by IRLinker, and this materializer was freely calling RAUW
methods whenever a global definition was updated in the temporary merged
output file. However, replaceAllUsesWith may or may not destroy
constants that use this global. If the linked definition has a type
mismatch regarding the new def and the old def, the materializer would
bitcast the old type to the new type and the elements of the llvm.used
array, which already uses bitcast to i8*, would end up with elements
cascading two bitcasts. RAUW would then indirectly call the
constantfolder to update the constant to the new ref, which would,
instead of updating the constant, destroy it to be able to create
a new constant that folds the two bitcasts into one. The problem is that
ValueMapper works with pointers to the same constants that may be
getting destroyed by RAUW. Obviously, RAUW can update references in the
Module to do not use the old destroyed constant, but it can't update
ValueMapper's internal pointers to these constants, which are now
invalid.
The approach here is to move the task of RAUWing old definitions
outside of the materializer.
Test Plan:
Added LIT test case, tested clang self-hosting with D56928 and
verified it works
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D59552
llvm-svn: 356597
Summary:
PAL metadata now supports both the old linear reg=val pairs format and
the new MsgPack format.
The MsgPack format uses YAML as its textual representation. On output to
YAML, a mnemonic name is provided for some hardware registers.
Differential Revision: https://reviews.llvm.org/D57028
Change-Id: I2bbaabaaca4b3574f7e03b80fbef7c7a69d06a94
llvm-svn: 356591
If we know we're not storing a lane, we don't need to compute the lane. This could be improved by using the undef element result to further prune the mask, but I want to separate that into its own change since it's relatively likely to expose other problems.
Differential Revision: https://reviews.llvm.org/D57247
llvm-svn: 356590
Summary:
Before this patch, if any Use existed in the loop, with a defining
access in the loop, we conservatively decide to not move the store.
What this approach was missing, is that ordered loads are not Uses, they're Defs
in MemorySSA. So, even when the clobbering walker does not find that
volatile load to interfere, we still cannot hoist a store past a
volatile load.
Resolves PR41140.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59564
llvm-svn: 356588
This is a small followup to D59511. The code that was moved into
computeConstantRange() there is a bit overly conversative: If the
abs is not nsw, it does not compute any range. However, abs without
nsw still has a well-defined contiguous unsigned range from 0 to
SIGNED_MIN. This is a lot less useful than the usual 0 to SIGNED_MAX
range, but if we're already here we might as well specify it...
Differential Revision: https://reviews.llvm.org/D59563
llvm-svn: 356586
Summary:
This commit introduces a new AMDGPUPALMetadata class that:
* is inside the AMDGPU target;
* keeps an in-memory representation of PAL metadata;
* provides a method to read the frontend-supplied metadata from LLVM IR;
* provides methods for the asm printer to set metadata items;
* provides methods to write the metadata as a binary blob to put in a
.note record or as an asm directive;
* provides a method to read the metadata as a binary blob from a .note
record.
Because llvm-readobj cannot call directly into a target, I had to remove
llvm-readobj's ability to dump PAL metadata, pending a resolution to
https://reviews.llvm.org/D52821
Differential Revision: https://reviews.llvm.org/D57027
Change-Id: I756dc830894fcb6850324cdcfa87c0120eb2cf64
llvm-svn: 356582
This adds new function getMemcpyCost to TTI so that the cost of a memcpy can be
modeled and queried. The default implementation returns Expensive, but targets
can override this function to model the cost more accurately.
Differential Revision: https://reviews.llvm.org/D59252
llvm-svn: 356555
If the compression was used and we had a symbol not involved in relocation,
we never updated its section and it was silently removed from the output.
Differential revision: https://reviews.llvm.org/D59542
llvm-svn: 356554
Summary:
If an MIMG instruction has managed to get through to adjustWritemask in isel but
has no uses (and doesn't enable TFC) then prevent an assertion by not attempting
to adjust the writemask.
The instruction will be removed anyway.
Change-Id: I9a5dba6bafe1f35ac99c1b73df390936e2ac27a7
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58964
llvm-svn: 356540
This change does two things. One, it ensures compilation will abort
instead of miscompiling if ARMFrameLowering::determineCalleeSaves
chooses not to save LR in a case where it's necessary. Two, it changes
the way we estimate the size of a function to be more conservative in
the presence of constant pool entries and jump tables.
EstimateFunctionSizeInBytes probably still isn't really conservative
enough, but I'm not sure how we can come up with a reliable estimate
before constant islands runs.
Differential Revision: https://reviews.llvm.org/D59439
llvm-svn: 356527
This adds pattern matching for the insert+shufflevector sequence so we can
generate dup instructions instead of the current TBL sequence.
Differential Revision: https://reviews.llvm.org/D59558
llvm-svn: 356526
Nothing prevents entries from being bigger than the 16 bit size field in
Dwarf < 5. For entries that are too big, just emit an empty entry
instead of crashing.
This fixes PR41038.
Reviewers: probinson, aprantl, davide
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D59518
llvm-svn: 356514
LTO provides additional opportunities for tailcall elimination due to
link-time inlining and visibility of nocapture attribute. Testing showed
negligible impact on compilation times.
Differential Revision: https://reviews.llvm.org/D58391
llvm-svn: 356511
Teach instcombine to propagate demanded elements through a masked load or masked gather instruction. This is in the broader context of improving vector pointer instcombine under https://reviews.llvm.org/D57140.
Differential Revision: https://reviews.llvm.org/D57372
llvm-svn: 356510
The 2nd loop calculates spill costs but reports free registers as cost
0 anyway, so there is little benefit from having a separate early
loop.
Surprisingly this is not NFC, as many register are marked regDisabled
so the first loop often picks up later registers unnecessarily instead
of the first one available in the allocation order...
Patch by Matthias Braun
llvm-svn: 356499
The actual code change is fairly straight forward, but exercising it isn't. First, it turned out we weren't adding the appropriate flags in SelectionDAG. Second, it turned out that we've got some optimization gaps, so obvious test cases don't work.
My first attempt (in atomic-unordered.ll) points out a deficiency in our peephole-opt folding logic which I plan to fix separately. Instead, I'm exercising this through MachineLICM.
Differential Revision: https://reviews.llvm.org/D59375
llvm-svn: 356494
Improve computeOverflowForUnsignedAdd/Sub in ValueTracking by
intersecting the computeConstantRange() result into the ConstantRange
created from computeKnownBits(). This allows us to detect some
additional never/always overflows conditions that can't be determined
from known bits.
This revision also adds basic handling for constants to
computeConstantRange(). Non-splat vectors will be handled in a followup.
The signed case will also be handled in a followup, as it needs some
more groundwork.
Differential Revision: https://reviews.llvm.org/D59386
llvm-svn: 356489
Add tests for wider atomic loads and stores. In the process, fix a crasher where we appearently handled unorder stores, but not loads, when lowering to cmpxchg idioms.
llvm-svn: 356482
Dynamic stack realignment was disabled on micromips by checking if
target has standard encoding. We simply change the condition to skip
Mips16 only.
Patch by Mirko Brkusanin.
Differential Revision: http://reviews.llvm.org/D59499
llvm-svn: 356478
In r311255 we added a case where we split vectors whose elements are
all derived from the same input vector so that we could shuffle it
more efficiently. In doing so, createBuildVecShuffle was taught to
adjust for the fact that all indices would be based off of the first
vector when this happens, but it's possible for the code that checked
that to fire incorrectly if we happen to have a BUILD_VECTOR of
extracts from subvectors and don't hit this new optimization.
Instead of trying to detect if we've split the vector by checking if
we have extracts from the same base vector, we can just pass that
information into createBuildVecShuffle, avoiding the miscompile.
Differential Revision: https://reviews.llvm.org/D59507
llvm-svn: 356476
