Summary:
Currently, add_llvm_library would create an OBJECT library alongside
of a STATIC / SHARED library, but losing the link interface (its
elements would become dependencies instead). To support scenarios
where linking an object library also brings in its usage
requirements, this patch adds support for 'stand-alone' OBJECT
libraries - i.e. without an accompanying SHARED/STATIC library, and
maintaining the link interface defined by the user.
The support is via a new option, OBJECT_ONLY, to avoid breaking changes
- since just specifying "OBJECT" would currently imply also STATIC or
SHARED, depending on BUILD_SHARED_LIBS.
This is useful for cases where, for example, we want to build a part
of a component separately. Using a STATIC target would incur the risk
that symbols not referenced in the consumer would be dropped (which may
be undesirable).
The current application is the ML part of Analysis. It should be part
of the Analysis component, so it may reference other analyses; and (in
upcoming changes) it has dependencies on optional libraries.
Reviewers: karies, davidxl
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81447
In preparation for a patch that will enforce new rules for the usage of
the strictfp attribute, this patch introduces auto-upgrade behavior that
will replace the strictfp attribute on callsites with nobuiltin if the
enclosing function declaration doesn't also have the strictfp attribute.
This auto-upgrade isn't being performed on .ll files because that would
prevent us from writing a test for the forthcoming verifier behavior.
Differential Revision: https://reviews.llvm.org/D70096
Standard opcodes usually have ULEB128 arguments, so it is generally not
possible to recover from such errors. This patch causes the parser to
stop parsing the table in such situations.
Also don't emit the operands or add data to the table if there is an
error reading these opcodes.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D81470
Summary:
When an SCC got split due to inlining, we have two mechanisms for reprocessing the updated SCC, first is UR.UpdatedC
that repeatedly rerun the new, current SCC; second is a worklist for all newly split SCCs. We can avoid rerun of
the same SCC when the SCC is set to be processed by both mechanisms *back to back*. In pathological cases, such redundant
rerun could cause exponential size growth due to inlining along cycles, even when there's no SCC mutation and hence
convergence is not a problem.
Note that it's ok to have SCC updated and rerun immediately, and also in the work list if we have actually moved an SCC
to be topologically "below" the current one due to merging. In that case, we will need to revisit the current SCC after
those moved SCCs. For that reason, the redundant avoidance here only targets back to back rerun of the same SCC - the
case described by the now removed FIXME comment.
Reviewers: chandlerc, wmi
Subscribers: llvm-commits, hoy
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80589
Currently, there doesn't seem to be any way to look up a Value*
in a map/set indexed by AssertingVH/PoisoningVH, without creating
a value handle -- which is fairly expensive, because it involves
adding the value handle to the use list and immediately removing
it again. Using find_as(Value *) does not work (and is in fact
worse than just using find(Value *)), because it will end up
creating multiple value handles during the lookup itself.
For AssertingVH, address this by simply using DenseMapInfo<T *>
instead of manually implementing something. The AssertingVH<T>
will now get coerced to T*, rather than the other way around.
For PoisoningVH, add extra overloads of getHashValue() and
isEqual() that accept a T* argument.
This allows using find_as(Value *) to perform efficient lookups
in assertion-enabled builds.
Differential Revision: https://reviews.llvm.org/D81793
Add a unit test that shows how CSE works if we install an observer
at the machine function level and not use the CSEMIRBuilder to build
instructions.
https://reviews.llvm.org/D81625
Until we have a real need for computing known bits for scalable
vectors I have simply changed the code to bail out for now and
pretend we know nothing. I've also fixed up some simple callers of
computeKnownBits too.
Differential Revision: https://reviews.llvm.org/D80437
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support for specifying the
matching constraint for a numeric expression, ie. how the value being
matched should relate to the numeric expression.
This commit only adds the equality constraint where the numeric value
matched must be equal to the numeric expression. It is the default
matching constraint used when not specified. It is added to provision
other matching constraint (e.g. inequality relations).
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D60391
Summary:
When constructing an APSInt from a string, the constructor doesn't correctly
truncate the bit width of the result if the passed in string was "0" (or any
alternative way to express 0 like "-0" or "000"). Instead of 1 (which is the
smallest allowed bit width) it returns an APSInt with a bit width of 5.
The reason is that the constructor checks that it never truncates the result to
the invalid bit width of 0, so when it calculates that storing a "0" doesn't
require any bits it just keeps the original overestimated bit width (which
happens to be 5).
This patch just sets the bit width of the result to 1 if the required bit width
is 0.
Reviewers: arphaman, dexonsmith
Reviewed By: dexonsmith
Subscribers: hiraditya, dexonsmith, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81329
Summary:
This makes the code easier to reason about, as it will behave the same
way regardless of whether there is any more data coming after the
presumed end of the prologue.
Reviewers: jhenderson, dblaikie, probinson, ikudrin
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77557
This patch extends numerical expressions to allow calls to
predefined functions. These calls can be combined with the
existing numerical operators, which includes nesting calls.
The call syntax is:
<func>(<args>)
Where <func> is a predefined string literal, currently limited to
one of add, max, min and sub. <arg> is a comma seperated list of
numerical expressions.
Subscribers: arichardson, hiraditya, thopre, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79936
It was annoying enough that every custom lowering needed to set the
insert point, but this was made worse since now these all needed to be
updated to setInstrAndDebugLoc. Consolidate these so every
legalization action has the right insert position by default.
This should fix dropping debug info in every custom AMDGPU
legalization.
The verbose printing of unrecognised standard opcodes was broken in
multiple ways (additional blank lines, a closing parenthesis without
opening parenthesis and so on). This patch fixes it, and makes the
output more consistent with other opcodes.
The new line printing for debug line verbose output was inconsistent.
For new rows in the matrix, a blank line followed, whilst the
DW_LNS_copy opcode actually resulted in two blank lines. There was also
potential inconsistency in the blank lines at the end of the table. This
patch mostly resolves these issues - no blank lines appear in the output
except for a single line after the prologue and at table end to separate
it from any subsquent table, plus some instances after error messages.
Also add a unit test for verbose output to test the fine details of new
line placement and other aspects of verbose output.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D81102
Verbose and non-verbose parsing of .debug_line produced their output at
different points in the program. The most obvious impact of this was
that error messages were produced at different times, but it also
potentially reduced what clients could do by customising the stream or
warning/error handlers.
This change makes the two variants consistent by printing non-verbose
output inline, the same as verbose output.
Testing of the error messages has been modified to check the messages
always appear in the same location to illustrate the behaviour.
Reviewed by: JDevlieghere, dblaikie, MaskRay, labath
Differential Revision: https://reviews.llvm.org/D80989
errs() is now tied to outs() so that if something prints to errs(),
outs() will be flushed before the printing occurs. This avoids
interleaving output between the two and is consistent with standard cout
and cerr behaviour.
Reviewed by: labath, JDevlieghere, MaskRay
Differential Revision: https://reviews.llvm.org/D81156
Previously, if an extended opcode was truncated, it would manifest as an
"unexpected line op length error" which wasn't quite accurate. This
change checks for errors any time data is read whilst parsing an
extended opcode, and reports any errors detected.
Reviewed by: MaskRay, labath, aprantl
Differential Revision: https://reviews.llvm.org/D80797
This moves the SuffixTree test used in the Machine Outliner and moves it into Support for use in other outliners elsewhere in the compilation pipeline.
Differential Revision: https://reviews.llvm.org/D80586
Replace the DisableColors with a ColorMode which can be set to Auto,
Enabled and Disabled. The purpose of this change is to make it possible
to ignore the command line option not only for disabling colors, but
also for enabling them.
Differential revision: https://reviews.llvm.org/D81056
Move the color handling code from raw_fd_ostream to raw_ostream. This
makes it possible to use colors with any ostream when enabled. The
existing behavior where only raw_fd_ostream supports colors by default
remains unchanged.
Differential revision: https://reviews.llvm.org/D81110
This patch updates TargetLoweringBase::computeRegisterProperties and
TargetLoweringBase::getTypeConversion to support scalable vectors,
and make the right calls on how to legalise them. These changes are required
to legalise both MVTs and EVTs.
Reviewers: efriedma, david-arm, ctetreau
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80640
Summary:
If the output filename was specified as "-", the ToolOutputFile class
would create a brand new raw_ostream object referring to the stdout.
This patch changes it to reuse the llvm::outs() singleton.
At the moment, this change should be "NFC", but it does enable other
enhancements, like the automatic stdout/stderr synchronization as
discussed on D80803.
I've checked the history, and I did not find any indication that this
class *has* to use a brand new stream object instead of outs() --
indeed, it is special-casing "-" in a number of places already, so this
change fits the pattern pretty well. I suspect the main reason for the
current state of affairs is that the class was originally introduced
(r111595, in 2010) as a raw_fd_ostream subclass, which made any other
solution impossible.
Another potential benefit of this patch is that it makes it possible to
move the raw_ostream class out of the business of special-casing "-" for
stdout handling. That state of affairs does not seem appropriate because
"-" is a valid filename (albeit hard to access with a lot of command
line tools) on most systems. Handling "-" in ToolOutputFile seems more
appropriate.
To make this possible, this patch changes the return type of
llvm::outs() and errs() to raw_fd_ostream&. Previously the functions
were constructing objects of that type, but returning a generic
raw_ostream reference. This makes it possible for new ToolOutputFile and
other code to use raw_fd_ostream methods like error() on the outs()
object. This does not seem like a bad thing (since stdout is a file
descriptor which can be redirected to anywhere, it makes sense to ask it
whether the writing was successful or if it supports seeking), and
indeed a lot of code was already depending on this fact via the
ToolOutputFile "back door".
Reviewers: dblaikie, JDevlieghere, MaskRay, jhenderson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81078
This patch fixes VPIntrinsic::canIgnoreVectorLength when used on a
VPIntrinsic with scalable vector types. Also includes new unittest cases
for the '<vscale x 1 x whatever>' and '%evl == vscale' corner cases.
New functions `lockFile`, `tryLockFile` and `unlockFile` implement
simple file locking. They lock or unlock entire file. This must be
enough to support simulataneous writes to log files in parallel builds.
Differential Revision: https://reviews.llvm.org/D78896
Summary:
This is a result of the discussion at D78113. Previously we would be
only giving the current offset at which the error was detected. However,
this was phrased somewhat ambiguously (as it could also mean that end of
data was at that offset). The new error message includes the current
offset as well as the extent of the data being read.
I've changed a couple of file-level static functions into private member
functions in order to avoid passing a bunch of new arguments everywhere.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78558
Summary:
Instead of iterating over all VarLoc IDs in removeEntryValue(), just
iterate over the interval reserved for entry value VarLocs. This changes
the iteration order, hence the test update -- otherwise this is NFC.
This appears to give an ~8.5x wall time speed-up for LiveDebugValues when
compiling sqlite3.c 3.30.1 with a Release clang (on my machine):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
Before: 2.5402 ( 18.8%) 0.0050 ( 0.4%) 2.5452 ( 17.3%) 2.5452 ( 17.3%) Live DEBUG_VALUE analysis
After: 0.2364 ( 2.1%) 0.0034 ( 0.3%) 0.2399 ( 2.0%) 0.2398 ( 2.0%) Live DEBUG_VALUE analysis
```
The change in removeEntryValue() is the only one that appears to affect
wall time, but for consistency (and to resolve a pending TODO), I made
the analogous changes for iterating over SpillLocKind VarLocs.
Reviewers: nikic, aprantl, jmorse, djtodoro
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80684
Summary:
The working set size heuristics (ProfileSummaryInfo::hasHugeWorkingSetSize)
under the partial sample PGO may not be accurate because the profile is partial
and the number of hot profile counters in the ProfileSummary may not reflect the
actual working set size of the program being compiled.
To improve this, the (approximated) ratio of the the number of profile counters
of the program being compiled to the number of profile counters in the partial
sample profile is computed (which is called the partial profile ratio) and the
working set size of the profile is scaled by this ratio to reflect the working
set size of the program being compiled and used for the working set size
heuristics.
The partial profile ratio is approximated based on the number of the basic
blocks in the program and the NumCounts field in the ProfileSummary and computed
through the thin LTO indexing. This means that there is the limitation that the
scaled working set size is available to the thin LTO post link passes only.
Reviewers: davidxl
Subscribers: mgorny, eraman, hiraditya, steven_wu, dexonsmith, arphaman, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79831
SUMMARY:
when there are two symbol has the same address. llvm-objdump -D -symbol-description will select symbol based on the following rule:
1. using Label first if there is a Label symbol.
2. If there is not Label, using a symbol which has Storage Mapping class.
3. if more than one symbol has storage mapping class, put the TC0 has the low priority, for other storage mapping class , compare based on the value.
Reviewers: James Henderson ,hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D78387
