AggressiveAntiDepBreaker was doing some EarlyClobber checking, but was not
checking that the register being potentially renamed was defined by an
early-clobber def where there was also a use, in that instruction, of the
register being considered as the target of the rename. Fixes PR24014.
llvm-svn: 246423
Summary:
If run with other locales (like French),
the decode operation might fail
Reviewers: rafael
Differential Revision: http://reviews.llvm.org/D12432
llvm-svn: 246421
Summary:
JumpThreading shouldn't duplicate a convergent call, because that would move a convergent call into a control-inequivalent location. For example,
if (cond) {
...
} else {
...
}
convergent_call();
if (cond) {
...
} else {
...
}
should not be optimized to
if (cond) {
...
convergent_call();
...
} else {
...
convergent_call();
...
}
Test Plan: test/Transforms/JumpThreading/basic.ll
Patch by Xuetian Weng.
Reviewers: resistor, arsenm, jingyue
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12484
llvm-svn: 246415
This testcase required 2 copies of the same file, and the second
copy was missing. It was currently working because of a bug I'm
about to fix.
llvm-svn: 246411
The fix is trivial (The actual patch is 2 lines, but as it changes
indentation it looks like more).
clang does not produce this kind of (slightly bogus) debug info
anymore, thus I had to rely on a hand-crafted assembly test to trigger
that case.
llvm-svn: 246410
The value of an inlined subprogram low_pc attribute should not
get relocated, but it can happen that it matches the enclosing
function's start address and thus gets the generic treatment.
Special case it to avoid applying the PC offset twice.
llvm-svn: 246406
Specifically, the header now provides llvm::thread, which is either a
typedef of std::thread or a replacement that calls the function synchronously
depending on the value of LLVM_ENABLE_THREADS.
llvm-svn: 246402
There were really two problems here. The first was that we had the truth tables
for signed i1 comparisons backward. I imagine these are not very common, but if
you have:
setcc i1 x, y, LT
this has the '0 1' and the '1 0' results flipped compared to:
setcc i1 x, y, ULT
because, in the signed case, '1 0' is really '-1 0', and the answer is not the
same as in the unsigned case.
The second problem was that we did not have patterns (at all) for the unsigned
comparisons select_cc nodes for i1 comparison operands. This was the specific
cause of PR24552. These had to be added (and a missing Altivec promotion added
as well) to make sure these function for all types. I've added a bunch more
test cases for these patterns, and there are a few FIXMEs in the test case
regarding code-quality.
Fixes PR24552.
llvm-svn: 246400
This reverts commit r246371, as it cause a rather obscure bug in AArch64
test-suite paq8p (time outs, seg-faults). I'll investigate it before
reapplying.
llvm-svn: 246379
architecture string is something quite weird. Similarly delay calling
the BPF parsing code, although that is more reasonable.
To understand why I was motivated to make this change, it cuts the time
for running the ADT TripleTest unittests by a factor of two in
non-optimized builds (the developer default) and reduces my 'check-llvm'
time by a full 15 seconds. The implementation of parseARMArch is *that*
slow. I tried to fix it in the prior series of commits, but frankly,
I have no idea how to finish fixing it. The entire premise of the
function (to allow 'v7a-unknown-linux' or some such to parse as an
'arm-unknown-linux' triple) seems completely insane to me, but I'll let
the ARM folks sort that out. At least it is now out of the critical path
of every developer working on LLVM. It also will likely make some other
folks' code significantly faster as I've heard reports of 2% of time
spent in triple parsing even in optimized builds!
I'm not done making this code faster, but I am done trying to improve
the ARM target parsing code.
llvm-svn: 246378
of its strings when expanding the string literals from the macros, and
push all of the APIs to be StringRef instead of C-string APIs.
This (remarkably) removes a very non-trivial number of strlen calls. It
even deletes code and complexity from one of the primary users -- Clang.
llvm-svn: 246374
Add support for MIR serialization of PowerPC-specific operand target flags
(based on the generic infrastructure added in r244185 and r245383).
I won't even pretend that this is good test coverage, but this includes the
regression test associated with r246372. Adding an MIR test for that fix is far
superior to adding an IR-level test because particular instruction-scheduling
decisions are necessary in order to expose the bug, and using an MIR test we
can start the pipeline post-scheduling.
llvm-svn: 246373
Even through ADDISdtprelHA generally has r3 as its source register, it is
possible for the instruction scheduler to move things around such that some
other register is the source. We need to print the actual source register, not
always r3. Fixes PR24394.
The test case will come in a follow-up commit because it depends on MIR
target-flags parsing.
llvm-svn: 246372
Value *getSplatValue(Value *Val);
It complements the CreateVectorSplat(), which creates 2 instructions - insertelement and shuffle with all-zero mask.
The new function recognizes the pattern - insertelement+shuffle and returns the splat value (or nullptr).
It also returns a splat value form ConstantDataVector, for completeness.
Differential Revision: http://reviews.llvm.org/D11124
llvm-svn: 246371
the necessary tables.
This will allow me to restructure the code and structures using this to
be significantly more efficient. It also removes the duplication of the
list of several enumerators. It also enshrines that the order of
enumerators match the order of the entries in the tables, something the
implementation code actually uses.
No functionality changed (yet).
llvm-svn: 246370
parsing logic prior to making substantial changes to it.
This parsing logic is incredibly wasteful, so I'm planning to rewrite
it. Just unittesting the triple parsing logic spends well over 80% of
its time in the ARM parsing logic, and others have measured significant
time spent here in real production compiles.
Stay tuned...
llvm-svn: 246369
This is especially visible in softfp mode, for example in the implementation of libm fabs/fneg functions. If we have:
%1 = vmovdrr r0, r1
%2 = fabs %1
then move the fabs before the vmovdrr:
%1 = and r1, #0x7FFFFFFF
%2 = vmovdrr r0, r1
This is never a lose, and could be a serious win because the vmovdrr may be followed by a vmovrrd, which would enable us to remove the conversion into FPRs completely.
We already do this for f32, but not for f64. Tests are added for both.
llvm-svn: 246360
The VOP3 encoding of these allows any SGPR pair for the i1
output, but this was forced before to always use vcc.
This doesn't yet try to use this, but does add the operand
to the definitions so the main change is adding vcc to the
output of the VOP2 encoding.
llvm-svn: 246358
Without a memory operand, mayLoad or mayStore instructions
are treated as hasUnorderedMemRef, which results in much worse
scheduling.
We really should have a verifier check that any
non-side effecting mayLoad or mayStore has a memory operand.
There are a few instructions (interp and images) which I'm
not sure what / where to add these.
llvm-svn: 246356
Summary:
We were assuming tha if the use operand had a sub-register that
the immediate was 64-bits, but this was breaking the case of
folding a 64-bit immediate into another 64-bit instruction.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12255
llvm-svn: 246354
I'm working on adding !dbg attachments to functions (PR23367), which
we'll use to determine the canonical subprogram for a function (instead
of the `subprograms:` array in the compile units). This updates a few
old tests in preparation.
Transforms/Mem2Reg/ConvertDebugInfo2.ll had an old-style grep+count
based test that would start to fail because I've added an extra line
with `!dbg`. Instead, explicitly `CHECK` for what I think the test
actually cares about.
All three testcases have subprograms with a valid `function:` reference
-- which means my upgrade script will add a `!dbg` attachment -- but
that aren't referenced from any compile unit. I suspect these testcases
were handreduced over-zealously (or have bitrotted?). Add a reference
from the compile unit so that upcoming Verifier checks won't fail here.
llvm-svn: 246351
This fixes PR24621 and matches what we do for `DILocation`. Although
the limit seems somewhat artificial, there are places in the backend
that also assume 16-bit columns, so we may as well just be consistent
about the limits.
llvm-svn: 246349
Add `Function::setSubprogram()` and `Function::getSubprogram()`,
convenience methods to forward to `setMetadata()` and `getMetadata()`,
respectively, and deal in `DISubprogram` instead of `MDNode`.
Also add a verifier check to enforce that `!dbg` attachments are always
subprograms.
Originally (when I had the llvm-dev discussion back in April) I thought
I'd store a pointer directly on `llvm::Function` for these attachments
-- we frequently have debug info, and that's much cheaper than using map
in the context if there are no other function-level attachments -- but
for now I'm just using the generic infrastructure. Let's add the extra
complexity only if this shows up in a profile.
llvm-svn: 246339
Currently the DWARF backend requires that subprograms have a type, and
the type is ignored if it has an empty type array. The long term
direction here -- see PR23079 -- is instead to skip the type entirely if
there's no valid type.
It turns out we have cases in tree of missing types on subprograms, but
since they're not referenced by compile units, the backend never crashes
on them. One option would be to add a Verifier check that subprograms
have types, and fix the bitrot. However, this is a fair bit of churn
(20-30 testcases) that would be reversed anyway by PR23079.
I found this inconsistency because of a WIP patch and upgrade script for
PR23367 that started crashing on test/DebugInfo/2010-10-01-crash.ll.
This commit updates the testcase to reference the subprogram from the
compile unit, and fixes the resulting crash (in line with the direction
of PR23079). This also updates `DIBuilder` to stop assuming a non-null
pointer for the subroutine types.
llvm-svn: 246333
This reverts isSafeToSpeculativelyExecute's use of ReadNone until we
split ReadNone into two pieces: one attribute which reasons about how
the function reasons about memory and another attribute which determines
how it may be speculated, CSE'd, trap, etc.
llvm-svn: 246331
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
llvm-svn: 246327
PR24605 is caused due to an incorrect insert point in instcombine's IR
builder. When simplifying
%t = add X Y
...
%m = icmp ... %t
the replacement for %t should be placed before %t, not before %m, as
there could be a use of %t between %t and %m.
llvm-svn: 246315
