The verbose printing of unrecognised standard opcodes was broken in
multiple ways (additional blank lines, a closing parenthesis without
opening parenthesis and so on). This patch fixes it, and makes the
output more consistent with other opcodes.
The new line printing for debug line verbose output was inconsistent.
For new rows in the matrix, a blank line followed, whilst the
DW_LNS_copy opcode actually resulted in two blank lines. There was also
potential inconsistency in the blank lines at the end of the table. This
patch mostly resolves these issues - no blank lines appear in the output
except for a single line after the prologue and at table end to separate
it from any subsquent table, plus some instances after error messages.
Also add a unit test for verbose output to test the fine details of new
line placement and other aspects of verbose output.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D81102
Verbose and non-verbose parsing of .debug_line produced their output at
different points in the program. The most obvious impact of this was
that error messages were produced at different times, but it also
potentially reduced what clients could do by customising the stream or
warning/error handlers.
This change makes the two variants consistent by printing non-verbose
output inline, the same as verbose output.
Testing of the error messages has been modified to check the messages
always appear in the same location to illustrate the behaviour.
Reviewed by: JDevlieghere, dblaikie, MaskRay, labath
Differential Revision: https://reviews.llvm.org/D80989
errs() is now tied to outs() so that if something prints to errs(),
outs() will be flushed before the printing occurs. This avoids
interleaving output between the two and is consistent with standard cout
and cerr behaviour.
Reviewed by: labath, JDevlieghere, MaskRay
Differential Revision: https://reviews.llvm.org/D81156
Previously, if an extended opcode was truncated, it would manifest as an
"unexpected line op length error" which wasn't quite accurate. This
change checks for errors any time data is read whilst parsing an
extended opcode, and reports any errors detected.
Reviewed by: MaskRay, labath, aprantl
Differential Revision: https://reviews.llvm.org/D80797
This moves the SuffixTree test used in the Machine Outliner and moves it into Support for use in other outliners elsewhere in the compilation pipeline.
Differential Revision: https://reviews.llvm.org/D80586
Replace the DisableColors with a ColorMode which can be set to Auto,
Enabled and Disabled. The purpose of this change is to make it possible
to ignore the command line option not only for disabling colors, but
also for enabling them.
Differential revision: https://reviews.llvm.org/D81056
Move the color handling code from raw_fd_ostream to raw_ostream. This
makes it possible to use colors with any ostream when enabled. The
existing behavior where only raw_fd_ostream supports colors by default
remains unchanged.
Differential revision: https://reviews.llvm.org/D81110
This patch updates TargetLoweringBase::computeRegisterProperties and
TargetLoweringBase::getTypeConversion to support scalable vectors,
and make the right calls on how to legalise them. These changes are required
to legalise both MVTs and EVTs.
Reviewers: efriedma, david-arm, ctetreau
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80640
Summary:
If the output filename was specified as "-", the ToolOutputFile class
would create a brand new raw_ostream object referring to the stdout.
This patch changes it to reuse the llvm::outs() singleton.
At the moment, this change should be "NFC", but it does enable other
enhancements, like the automatic stdout/stderr synchronization as
discussed on D80803.
I've checked the history, and I did not find any indication that this
class *has* to use a brand new stream object instead of outs() --
indeed, it is special-casing "-" in a number of places already, so this
change fits the pattern pretty well. I suspect the main reason for the
current state of affairs is that the class was originally introduced
(r111595, in 2010) as a raw_fd_ostream subclass, which made any other
solution impossible.
Another potential benefit of this patch is that it makes it possible to
move the raw_ostream class out of the business of special-casing "-" for
stdout handling. That state of affairs does not seem appropriate because
"-" is a valid filename (albeit hard to access with a lot of command
line tools) on most systems. Handling "-" in ToolOutputFile seems more
appropriate.
To make this possible, this patch changes the return type of
llvm::outs() and errs() to raw_fd_ostream&. Previously the functions
were constructing objects of that type, but returning a generic
raw_ostream reference. This makes it possible for new ToolOutputFile and
other code to use raw_fd_ostream methods like error() on the outs()
object. This does not seem like a bad thing (since stdout is a file
descriptor which can be redirected to anywhere, it makes sense to ask it
whether the writing was successful or if it supports seeking), and
indeed a lot of code was already depending on this fact via the
ToolOutputFile "back door".
Reviewers: dblaikie, JDevlieghere, MaskRay, jhenderson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81078
This patch fixes VPIntrinsic::canIgnoreVectorLength when used on a
VPIntrinsic with scalable vector types. Also includes new unittest cases
for the '<vscale x 1 x whatever>' and '%evl == vscale' corner cases.
New functions `lockFile`, `tryLockFile` and `unlockFile` implement
simple file locking. They lock or unlock entire file. This must be
enough to support simulataneous writes to log files in parallel builds.
Differential Revision: https://reviews.llvm.org/D78896
Summary:
This is a result of the discussion at D78113. Previously we would be
only giving the current offset at which the error was detected. However,
this was phrased somewhat ambiguously (as it could also mean that end of
data was at that offset). The new error message includes the current
offset as well as the extent of the data being read.
I've changed a couple of file-level static functions into private member
functions in order to avoid passing a bunch of new arguments everywhere.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78558
Summary:
Instead of iterating over all VarLoc IDs in removeEntryValue(), just
iterate over the interval reserved for entry value VarLocs. This changes
the iteration order, hence the test update -- otherwise this is NFC.
This appears to give an ~8.5x wall time speed-up for LiveDebugValues when
compiling sqlite3.c 3.30.1 with a Release clang (on my machine):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
Before: 2.5402 ( 18.8%) 0.0050 ( 0.4%) 2.5452 ( 17.3%) 2.5452 ( 17.3%) Live DEBUG_VALUE analysis
After: 0.2364 ( 2.1%) 0.0034 ( 0.3%) 0.2399 ( 2.0%) 0.2398 ( 2.0%) Live DEBUG_VALUE analysis
```
The change in removeEntryValue() is the only one that appears to affect
wall time, but for consistency (and to resolve a pending TODO), I made
the analogous changes for iterating over SpillLocKind VarLocs.
Reviewers: nikic, aprantl, jmorse, djtodoro
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80684
Summary:
The working set size heuristics (ProfileSummaryInfo::hasHugeWorkingSetSize)
under the partial sample PGO may not be accurate because the profile is partial
and the number of hot profile counters in the ProfileSummary may not reflect the
actual working set size of the program being compiled.
To improve this, the (approximated) ratio of the the number of profile counters
of the program being compiled to the number of profile counters in the partial
sample profile is computed (which is called the partial profile ratio) and the
working set size of the profile is scaled by this ratio to reflect the working
set size of the program being compiled and used for the working set size
heuristics.
The partial profile ratio is approximated based on the number of the basic
blocks in the program and the NumCounts field in the ProfileSummary and computed
through the thin LTO indexing. This means that there is the limitation that the
scaled working set size is available to the thin LTO post link passes only.
Reviewers: davidxl
Subscribers: mgorny, eraman, hiraditya, steven_wu, dexonsmith, arphaman, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79831
SUMMARY:
when there are two symbol has the same address. llvm-objdump -D -symbol-description will select symbol based on the following rule:
1. using Label first if there is a Label symbol.
2. If there is not Label, using a symbol which has Storage Mapping class.
3. if more than one symbol has storage mapping class, put the TC0 has the low priority, for other storage mapping class , compare based on the value.
Reviewers: James Henderson ,hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D78387
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch adds support signed numeric
values, thus allowing negative numeric values.
As such, the patch adds a new class to represent a signed or unsigned
value and add the logic for type promotion and type conversion in
numeric expression mixing signed and unsigned values. It also adds
the %d format specifier to represent signed value.
Finally, it also adds underflow and overflow detection when performing a
binary operation.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson
Reviewed By: jhenderson, arichardson
Subscribers: MaskRay, hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60390
This patch upgrades DISubrange to support fortran requirements.
Summary:
Below are the updates/addition of fields.
lowerBound - Now accepts signed integer or DIVariable or DIExpression,
earlier it accepted only signed integer.
upperBound - This field is now added and accepts signed interger or
DIVariable or DIExpression.
stride - This field is now added and accepts signed interger or
DIVariable or DIExpression.
This is required to describe bounds of array which are known at runtime.
Testing:
unit test cases added (hand-written)
check clang
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D80197
Summary:
Define ELF binary code for VE and modify code where should use this new code.
Depends on D79544.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D79545
Patch by Neil Dhar <dhar@alumni.duke.edu>
Current state machine for parsing tokens from response files in Windows
does not correctly handle the case where the last token is "". The current
implementation handles the last token by only adding it if it is not empty,
however this does not cover the case where the last token is meant to be
the empty string. We can cover this case by checking whether the state
machine was last in the UNQUOTED state, which indicates that the last
character of the input was a non-whitespace character.
Differential Revision: https://reviews.llvm.org/D78346
This is the groundwork required to implement strictfp. For now, this
should be NFC for regular instructoins (many instructions just gain an
extra use of a reserved register). Regalloc won't rematerialize
instructions with reads of physical registers, but we were suffering
from that anyway with the exec reads.
Should add it for all the related FP uses (possibly with some
extras). I did not add it to either the gpr index mode instructions
(or every single VALU instruction) since it's a ridiculous feature
already modeled as an arbitrary side effect.
Also work towards marking instructions with FP exceptions. This
doesn't actually set the bit yet since this would start to change
codegen. It seems nofpexcept is currently not implied from the regular
IR FP operations. Add it to some MIR tests where I think it might
matter.
code motion
Summary: Currently isSafeToMoveBefore uses DFS numbering for determining
the relative position of instruction and insert point which is not
always correct. This PR proposes the use of Dominator Tree depth for the
same. If a node is at a higher level than the insert point then it is
safe to say that we want to move in the forward direction.
Authored By: RithikSharma
Reviewer: Whitney, nikic, bmahjour, etiotto, fhahn
Reviewed By: Whitney
Subscribers: fhahn, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D80084
Summary:
When working with the DDG it's useful to be able to query details of the
memory dependencies between two nodes connected by a memory edge. The DDG
does not hold a copy of the dependencies, but it contains a reference to a
DependenceInfo object through which dependence information can be queried.
This patch adds a query function to the DDG to obtain all the Dependence
objects that exist between instructions of two nodes.
Authored By: bmahjour
Reviewers: Meinersbur, Whitney, etiotto
Reviewed By: Whitney
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80529
With this change it is be possible to write FileCheck expressions such
as [[#(VAR+1)-2]]. Currently, the only supported arithmetic operators are
plus and minus, so this is not particularly useful yet. However, it our
CHERI fork we have tests that benefit from having multiplication in
FileCheck expressions. Allowing parenthesized expressions is the simplest
way for us to work around the current lack of operator precedence in
FileCheck expressions.
Reviewed By: thopre, jhenderson
Differential Revision: https://reviews.llvm.org/D77383
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
This patch updates computeConstantRange to optionally take an assumption
cache as argument and use the available assumptions to limit the range
of the result.
Currently this is limited to assumptions that are comparisons.
Reviewers: reames, nikic, spatel, jdoerfert, lebedev.ri
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D76193
This was printing about r600 not being a valid subtarget for an amdgcn
triple. This is an awkward place because r600 and amdgcn unfortunately
occupy the same target. Silence the warning by specifying an explicit
subtarget.
If the caller needs to reponsible for making sure the MaybeAlign
has a value, then we should just make the caller convert it to an Align
with operator*.
I explicitly deleted the relational comparison operators that
were being inherited from Optional. It's unclear what the meaning
of two MaybeAligns were one is defined and the other isn't
should be. So make the caller reponsible for defining the behavior.
I left the ==/!= operators from Optional. But now that exposed a
weird quirk that ==/!= between Align and MaybeAlign required the
MaybeAlign to be defined. But now we use the operator== from
Optional that takes an Optional and the Value.
Differential Revision: https://reviews.llvm.org/D80455
