reciprocal if converting to the reciprocal is exact. Do it even if inexact
if -ffast-math. This substantially speeds up ac.f90 from the polyhedron
benchmarks.
llvm-svn: 154265
optimizers could do this for us, but expecting partial SROA of classes
with template methods through cloning is probably expecting too much
heroics. With this change, the begin/end pointer pairs which indicate
the status of each loop iteration are actually passed directly into each
layer of the combine_data calls, and the inliner has a chance to see
when most of the combine_data function could be deleted by inlining.
Similarly for 'length'.
We have to be careful to limit the places where in/out reference
parameters are used as those will also defeat the inliner / optimizers
from properly propagating constants.
With this change, LLVM is able to fully inline and unroll the hash
computation of small sets of values, such as two or three pointers.
These now decompose into essentially straight-line code with no loops or
function calls.
There is still one code quality problem to be solved with the hashing --
LLVM is failing to nuke the alloca. It removes all loads from the
alloca, leaving only lifetime intrinsics and dead(!!) stores to the
alloca. =/ Very unfortunate.
llvm-svn: 154264
speculate. Without this, loop rotate (among many other places) would
suddenly stop working in the presence of debug info. I found this
looking at loop rotate, and have augmented its tests with a reduction
out of a very hot loop in yacr2 where failing to do this rotation costs
sometimes more than 10% in runtime performance, perturbing numerous
downstream optimizations.
This should have no impact on performance without debug info, but the
change in performance when debug info is enabled can be extreme. As
a consequence (and this how I got to this yak) any profiling of
performance problems should be treated with deep suspicion -- they may
have been wildly innacurate of debug info was enabled for profiling. =/
Just a heads up.
llvm-svn: 154263
The tLDRr instruction with the last register operand set to the zero register
prints in assembly as if no register was specified, and the assembler encodes
it as a tLDRi instruction with a zero immediate. With the integrated assembler,
that zero register gets emitted as "r0", so we get "ldr rx, [ry, r0]" which
is broken. Emit the instruction as tLDRi with a zero immediate. I don't
know if there's a good way to write a testcase for this. Suggestions welcome.
Opportunities for follow-up work:
1) The asm printer should complain if a non-optional register operand is set
to the zero register, instead of silently dropping it.
2) The integrated assembler should complain in the same situation, instead of
silently emitting the operand as "r0".
llvm-svn: 154261
Cygwin-1.7 supports dw2. Some recent mingw distros support one, too.
I have confirmed test-suite/SingleSource/Benchmarks/Shootout-C++/except.cpp can pass on Cygwin.
llvm-svn: 154247
by default.
This is a behaviour configurable in the MCAsmInfo. I've decided to turn
it on by default in (possibly optimistic) hopes that most assemblers are
reasonably sane. If this proves a problem, switching to default seems
reasonable.
I'm not sure if this is the opportune place to test, but it seemed good
to make sure it was tested somewhere.
llvm-svn: 154235
After register masks were introdruced to represent the call clobbers, it
is no longer necessary to have duplicate instruction for iOS.
llvm-svn: 154209
disassembler requires a MCSubtargetInfo and a
MCInstrInfo to exist in order to initialize the
instruction printer and disassembler; however,
although the printer and disassembler keep
references to these objects they do not own them.
Previously, the MCSubtargetInfo and MCInstrInfo
objects were just leaked.
I have extended LLVMDisasmContext to own these
objects and delete them when it is destroyed.
llvm-svn: 154192
simplification has been performed. This is a bit less efficient
(requires another ilist walk of the basic blocks) but shouldn't matter
in practice. More importantly, it's just too much work to keep track of
all the various ways the return instructions can be mutated while
simplifying them. This fixes yet another crasher, reported by Daniel
Dunbar.
llvm-svn: 154179
dead code, including dead return instructions in some cases. Otherwise,
we end up having a bogus poniter to a return instruction that blows up
much further down the road.
It turns out that this pattern is both simpler to code, easier to update
in the face of enhancements to the inliner cleanup, and likely cheaper
given that it won't add dead instructions to the list.
Thanks to John Regehr's numerous test cases for teasing this out.
llvm-svn: 154157
We had special instructions for iOS because r9 is call-clobbered, but
that is represented dynamically by the register mask operands now, so
there is no need for the pseudo-instructions.
llvm-svn: 154144
The load/store optimizer splits LDRD/STRD into two instructions when the
register pairing doesn't work out. For negative offsets in Thumb2, it uses
t2STRi8 to do that. That's fine, except for the case when the offset is in
the range [-4,-1]. In that case, we'll also form a second t2STRi8 with
the original offset plus 4, resulting in a t2STRi8 with a non-negative
offset, which ends up as if it were an STRT, which is completely bogus.
Similarly for loads.
No testcase, unfortunately, as any I've been able to construct is both large
and extremely fragile.
rdar://11193937
llvm-svn: 154141
The empty 1-argument operator delete is for the benefit of the
destructor. A couple of spot checks of running yaml-bench under
valgrind against a few of the files under test/YAMLParser did
not reveal any leaks introduced by this change.
llvm-svn: 154137
Consider the following program:
$ cat main.c
void foo(void) { }
int main(int argc, char *argv[]) {
foo();
return 0;
}
$ cat bundle.c
extern void foo(void);
void bar(void) {
foo();
}
$ clang -o main main.c
$ clang -o bundle.so bundle.c -bundle -bundle_loader ./main
$ nm -m bundle.so
0000000000000f40 (__TEXT,__text) external _bar
(undefined) external _foo (from executable)
(undefined) external dyld_stub_binder (from libSystem)
$ clang -o main main.c -O4
$ clang -o bundle.so bundle.c -bundle -bundle_loader ./main
Undefined symbols for architecture x86_64:
"_foo", referenced from:
_bar in bundle-elQN6d.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
The linker was told that the 'foo' in 'main' was 'internal' and had no uses, so
it was dead stripped.
Another situation is something like:
define void @foo() {
ret void
}
define void @bar() {
call asm volatile "call _foo" ...
ret void
}
The only use of 'foo' is inside of an inline ASM call. Since we don't look
inside those for uses of functions, we don't specify this as a "use."
Get around this by not invoking the 'internalize' pass by default. This is an
admitted hack for LTO correctness.
<rdar://problem/11185386>
llvm-svn: 154124
'add r2, #-1024' should just use 'sub r2, #1024' rather than erroring out.
Thumb1 aliases for adding a negative immediate to the stack pointer,
also.
rdar://11192734
llvm-svn: 154123
LSR always tries to make the ICmp in the loop latch use the incremented
induction variable. This allows the induction variable to be kept in a
single register.
When the induction variable limit is equal to the stride,
SimplifySetCC() would break LSR's hard work by transforming:
(icmp (add iv, stride), stride) --> (cmp iv, 0)
This forced us to use lea for the IC update, preventing the simpler
incl+cmp.
<rdar://problem/7643606>
<rdar://problem/11184260>
llvm-svn: 154119
of the BBVectorizePass without using command line option. As pointed out
by Hal, we can ask the TargetLoweringInfo for the architecture specific
VectorizeConfig to perform vectorizing with architecture specific
information.
llvm-svn: 154096
the caller requested a null-terminated one.
When mapping the file there could be a racing issue that resulted in the file being larger
than the FileSize passed by the caller. We already have an assertion
for this in MemoryBuffer::init() but have a runtime guarantee that
the buffer will be null-terminated, so do a copy that adds a null-terminator.
Protects against crash of rdar://11161822.
llvm-svn: 154082
LSR can fold three addressing modes into its ICmpZero node:
ICmpZero BaseReg + Offset => ICmp BaseReg, -Offset
ICmpZero -1*ScaleReg + Offset => ICmp ScaleReg, Offset
ICmpZero BaseReg + -1*ScaleReg => ICmp BaseReg, ScaleReg
The first two cases are only used if TLI->isLegalICmpImmediate() likes
the offset.
Make sure the right Offset sign is passed to this method in the second
case. The ARM version is not symmetric.
<rdar://problem/11184260>
llvm-svn: 154079
