172 %ECX<def> = MOV32rr %reg1039<kill>
180 INLINEASM <es:subl $5,$1
sbbl $3,$0>, 10, %EAX<def>, 14, %ECX<earlyclobber,def>, 9, %EAX<kill>,
36, <fi#0>, 1, %reg0, 0, 9, %ECX<kill>, 36, <fi#1>, 1, %reg0, 0
188 %EAX<def> = MOV32rr %EAX<kill>
196 %ECX<def> = MOV32rr %ECX<kill>
204 %ECX<def> = MOV32rr %ECX<kill>
212 %EAX<def> = MOV32rr %EAX<kill>
220 %EAX<def> = MOV32rr %EAX
228 %reg1039<def> = MOV32rr %ECX<kill>
The early clobber operand ties ECX input to the ECX def.
The live interval of ECX is represented as this:
%reg20,inf = [46,47:1)[174,230:0) 0@174-(230) 1@46-(47)
The right way to represent this is something like
%reg20,inf = [46,47:2)[174,182:1)[181:230:0) 0@174-(182) 1@181-230 @2@46-(47)
Of course that won't work since that means overlapping live ranges defined by two val#.
The workaround for now is to add a bit to val# which says the val# is redefined by a early clobber def somewhere. This prevents the move at 228 from being optimized away by SimpleRegisterCoalescing::AdjustCopiesBackFrom.
llvm-svn: 61259
The EH_frame and .eh symbols are now private, except for darwin9 and earlier.
The patch also fixes the definition of PrivateGlobalPrefix on pcc linux.
llvm-svn: 61242
1. ppcf128 select is expanded to f64 select's.
2. f64 select operand 0 is an i1 truncate, it's promoted to i32 zero_extend.
3. f64 select is updated. It's changed back to a "NewNode" and being re-analyzed.
4. f64 select operands are being processed. Operand 0 is a "NewNode". It's being expunged out of ReplacedValues map.
5. ExpungeNode tries to remap f64 select and notice it's a "NewNode" and assert.
Duncan, please take a look. Thanks.
llvm-svn: 60443
is noticeably worse than previous PPC-specific code.
Since the latter was also wrong in some cases and
correctness is more important than efficiency, I'm
disabling this test temporarily while I fix it.
llvm-svn: 58876
ppcf128 to i32 conversion and expand it into a code
sequence like in LegalizeDAG. This needs custom
ppc lowering of FP_ROUND_INREG, so turn that on and
make it work with LegalizeTypes. Probably PPC should
simply custom lower the original conversion.
llvm-svn: 58329
the previous patch this one actually passes make check.
"Fix PR2356 on PowerPC: if we have an input and output that are tied together
that have different sizes (e.g. i32 and i64) make sure to reserve registers for
the bigger operand."
llvm-svn: 57771
vr2 = OR vr0, vr1
=>
vr2 = OR vr1, vr1 // after coalescing vr0 with vr1
Update the value# of the destination register with the copy instruction if that happens.
llvm-svn: 56165
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.
Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.
This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.
These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.
llvm-svn: 53728
simply does the atomic.cmp.swap on the larger type,
which means it blows away whatever is sitting in
the bytes just after the memory location, i.e.
causes a buffer overflow. This really requires
target specific code, which is why LegalizeTypes
doesn't try to handle this case generically. The
existing (wrong) code in LegalizeDAG will go away
automatically once the type legalization code is
removed from LegalizeDAG so I'm leaving it there
for the moment. Meanwhile, don't test for this
feature.
llvm-svn: 53669
In LegalizeDAG the value is zero-extended to
the new type before byte swapping. It doesn't
matter how the extension is done since the new
bits are shifted off anyway after the swap, so
extend by any old rubbish bits. This results
in the final assembler for the testcase being
one line shorter.
llvm-svn: 53604
getTargetNode and SelectNodeTo to reduce duplication, and to
make some of the getTargetNode code available to SelectNodeTo.
Use SelectNodeTo instead of getTargetNode in several new
interesting cases, as it mutates nodes in place instead of
creating new ones.
This triggers some scheduling behavior differences due to nodes
being presented to the scheduler in a different order. Some of the
arbitrary scheduling decisions it makes are now arbitrarily made
differently. This is visible in CodeGen/PowerPC/LargeAbsoluteAddr.ll,
where a trivial scheduling difference led to a trivial register
allocation difference.
llvm-svn: 53203
Added abstract class MemSDNode for any Node that have an associated MemOperand
Changed atomic.lcs => atomic.cmp.swap, atomic.las => atomic.load.add, and
atomic.lss => atomic.load.sub
llvm-svn: 52706
,------.
| |
| v
| t2 = phi ... t1 ...
| |
| v
| t1 = ...
| ... = ... t1 ...
| |
`------'
where there is a use in a PHI node that's a predecessor to the defining
block. We don't want to mark all predecessors as having the value "alive" in
this case. Also, the assert was too restrictive and didn't handle this case.
llvm-svn: 52655
Move platform independent code (lowering of possibly overwritten
arguments, check for tail call optimization eligibility) from
target X86ISelectionLowering.cpp to TargetLowering.h and
SelectionDAGISel.cpp.
Initial PowerPC tail call implementation:
Support ppc32 implemented and tested (passes my tests and
test-suite llvm-test).
Support ppc64 implemented and half tested (passes my tests).
On ppc tail call optimization is performed if
caller and callee are fastcc
call is a tail call (in tail call position, call followed by ret)
no variable argument lists or byval arguments
option -tailcallopt is enabled
Supported:
* non pic tail calls on linux/darwin
* module-local tail calls on linux(PIC/GOT)/darwin(PIC)
* inter-module tail calls on darwin(PIC)
If constraints are not met a normal call will be emitted.
A test checking the argument lowering behaviour on x86-64 was added.
llvm-svn: 50477
When choosing between constraints with multiple options,
like "ir", test to see if we can use the 'i' constraint and
go with that if possible. This produces more optimal ASM in
all cases (sparing a register and an instruction to load it),
and fixes inline asm like this:
void test () {
asm volatile (" %c0 %1 " : : "imr" (42), "imr"(14));
}
Previously we would dump "42" into a memory location (which
is ok for the 'm' constraint) which would cause a problem
because the 'c' modifier is not valid on memory operands.
Isn't it great how inline asm turns 'missed optimization'
into 'compile failed'??
Incidentally, this was the todo in
PowerPC/2007-04-24-InlineAsm-I-Modifier.ll
Please do NOT pull this into Tak.
llvm-svn: 50315
EH info for these functions causes the tests to fail for
random reasons (e.g. looking for 'or' or counting lines
with asm-printer; labels count as lines.)
llvm-svn: 49003
1. If part of a register is re-defined, an implicit kill and an implicit def are added to denote read / mod / write. However, this should only be necessary if the register is actually read later. This is a performance issue.
2. If a sub-register is being defined, and it doesn't have a previous use, do not add a implicit kill to the last use of a super-register:
= EAX, AX<imp-use,kill>
...
AX =
In this case, EAX is live but AX is killed, this is wrong and will cause the coalescer to do bad things.
llvm-svn: 48521
and it's the result that requires expansion. This code is a little confusing
because the TargetLoweringInfo tables for [US]INT_TO_FP use the operand type
(the integer type) rather than the result type.
llvm-svn: 48206
PPC-64 doesn't work.) This also lowers the spilling of the CR registers so that
it uses a register other than the default R0 register (the scavenger scrounges
for one). A significant part of this patch fixes how kill information is
handled.
llvm-svn: 47863
the code generated is not wonderful. This turns a miscompilation into
a code quality bug (noted in the ppc readme). This fixes PR642, which
is over 2 years old (!). Nate, please review this.
llvm-svn: 45742
FE.
- Explicitly pass in the alignment of the load & store.
- XFAIL 2007-10-23-UnalignedMemcpy.ll because llc has a bug that crashes on
unaligned pointers.
llvm-svn: 43398
basic arithmetic works.
Rename RTLIB long double functions to distinguish
different flavors of long double; the lib functions
have different names, alas.
llvm-svn: 42644
This also changes the syntax for llvm.bswap, llvm.part.set, llvm.part.select, and llvm.ct* intrinsics. They are automatically upgraded by both the LLVM ASM reader and the bitcode reader. The test cases have been updated, with special tests added to ensure the automatic upgrading is supported.
llvm-svn: 40807
Change the keywords for the zext and sext parameter attributes to be
zeroext and signext so they don't conflict with the keywords for the
instructions of the same name. This gets around the ambiguity.
llvm-svn: 40069
register ordering, for both physical and virtual registers. Update the PPC
target lowering for calls to expect registers for the call result to
already be in target order.
llvm-svn: 38471
endian swapping should be done, and update the code to use it. This fixes
some register ordering issues on big-endian systems, such as PowerPC,
introduced by the recent illegal by-val arguments changes.
llvm-svn: 37921
Remove && from the end of the lines to prevent tests from throwing run
lines into the background. Also, clean up places where the same command
is run multiple times by using a temporary file.
llvm-svn: 36142
global variables that needed to be passed in. This makes it possible to
add new global variables with only a couple changes (Makefile and llvm-dg.exp)
instead of touching every single dg.exp file.
llvm-svn: 35918
Update these test cases to use proper signatures for bswap which is now
and overloaded intrinsic. Its name must be of the form llvm.bswap.i32.i32
since both the parameter and the result or of type "iAny". Also, the
bit counting intrinsics changed to always return i32.
llvm-svn: 35548
This feature is needed in order to support shifts of more than 255 bits
on large integer types. This changes the syntax for llvm assembly to
make shl, ashr and lshr instructions look like a binary operator:
shl i32 %X, 1
instead of
shl i32 %X, i8 1
Additionally, this should help a few passes perform additional optimizations.
llvm-svn: 33776
Update these tests to not use the same name even though the type of the
value differs. After PR411 hits, type planes will be gone and it will be
illegal for a name to be used twice, regardless of type.
llvm-svn: 33660
Remove "target endian/pointersize" or add "target datalayout" to make
the test parse properly or set the datalayout because defaults changes.
For PR645:
Make global names use the @ prefix.
For llvm-upgrade changes:
Fix test cases or completely remove use of llvm-upgrade for test cases
that cannot survive the new renaming or upgrade capabilities.
llvm-svn: 33533
