We were previously creating a global variable of function type,
which is invalid IR. This issue was exposed by r304690, in which we
started asserting that global variables were of a valid type.
Fixes PR33462.
Differential Revision: https://reviews.llvm.org/D36438
llvm-svn: 310543
Summary:
Fixed PR33966.
CFI code generation for users (not just callers) of a function depends
on whether this function has a jumptable entry or not. This
information needs to be encoded in of thinlto cache key.
We filter the jumptable list against functions that are actually
referenced in the current module.
Subscribers: mehdi_amini, inglorion, eraman, hiraditya
Differential Revision: https://reviews.llvm.org/D36346
llvm-svn: 310536
Clean up after my misguided attempt in r304267 to "fix" CMP_SWAP
returning an uninitialized status value.
- I was always using tMOVi8 to zero the status register which cannot
encode higher register numbers and llvm would silently miscompile)
- Nobody was ever looking at that status value outside the expansion.
ARMDAGToDAGISel::SelectCMP_SWAP() the only place creating CMP_SWAP
instructions was not mapping anything to it. (The cmpxchg status value
from llvm IR is lowered to a manual comparison after the CMP_SWAP)
So this:
- Renames the register from "status" to "temp" it make it obvious that
it isn't used outside the expansion.
- Remove the zeroing status/temp register.
- Keep the live-in list improvements from r304267
Fixes http://llvm.org/PR34056
llvm-svn: 310534
Currently, only non-negative immediate is allowed prior to a brac expression (memory reference).
MASM / GAS does not have any problem cope with the left side of the real line, so we should be able to as well.
Differntial Revision: https://reviews.llvm.org/D36229
llvm-svn: 310528
Linker::LinkOnlyNeeded should always import globals with
AppendingLinkage.
This resolves PR33527.
Differential Revision: https://reviews.llvm.org/D34448
llvm-svn: 310522
Files which don't contain any functions are likely useless; don't
include them in the main table. Put the links at the bottom of the
page, in case someone wants to figure out coverage for code inside
a macro.
Not sure if this is the best solution, but it seems like an
improvement.
Differential Revision: https://reviews.llvm.org/D36298
llvm-svn: 310518
This patch adds support for thumb relocations to RuntimeDyldMachOARM, and adds
a target-specific flags field to JITSymbolFlags (so that on ARM we can record
whether each symbol is Thumb-mode code).
RuntimeDyldImpl::emitSection is modified to ensure that stubs memory is
correctly aligned based on the size returned by getStubAlignment().
llvm-svn: 310517
I couldn't find any smaller folds to help the cases in:
https://bugs.llvm.org/show_bug.cgi?id=34046
after:
rL310141
The truncated rotate-by-variable patterns elude all of the existing transforms because
of multiple uses and knowledge about demanded bits and knownbits that doesn't exist
without the whole pattern. So we need an unfortunately large pattern match. But by
simplifying this pattern in IR, the backend is already able to generate
rolb/rolw/rorb/rorw for x86 using its existing rotate matching logic (although
there is a likely extraneous 'and' of the rotate amount).
Note that rotate-by-constant doesn't have this problem - smaller folds should already
produce the narrow IR ops.
Differential Revision: https://reviews.llvm.org/D36395
llvm-svn: 310509
Summary:
Instrumentation to copy byval arguments is now correctly inserted
after the dynamic shadow base is loaded.
Reviewers: vitalybuka, eugenis
Reviewed By: vitalybuka
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D36533
llvm-svn: 310503
Fixes the vpbroadcastb/w instructions which use GPRs as source operands, to use the correct registers.
The full GPR should be used, and not the subregister, as it happens before the patch.
Fixes pr33795
Differential Revision:
https://reviews.llvm.org/D36479
llvm-svn: 310498
must-alias(p, sz_p, p, sz_q) irrespective of access sizes sz_p, sz_q
As discussed a couple of weeks ago on the ML.
This makes the behavior consistent with that of BasicAA.
AA clients already check the obj size themselves and may not require the
obj size to match exactly the access size (e.g., in case of store forwarding)
llvm-svn: 310495
This is to help recommit a fixed version of r310208. As shown in PR34097,
we could miscompile if subtraction of the constants overflowed.
llvm-svn: 310490
Summary:
A similar error message has been removed from the ARMTargetMachineBase
constructor in r306939. With this patch, we generate an error message
for the example below, compiled with -mcpu=cortex-m0, which does not
have ARM execution mode.
__attribute__((target("arm"))) int foo(int a, int b)
{
return a + b % a;
}
__attribute__((target("thumb"))) int bar(int a, int b)
{
return a + b % a;
}
By adding this error message to ARMBaseTargetMachine::getSubtargetImpl,
we can deal with functions that set -thumb-mode in target-features.
At the moment it seems like Clang does not have access to target-feature
specific information, so adding the error message to the frontend will
be harder.
Reviewers: echristo, richard.barton.arm, t.p.northover, rengolin, efriedma
Reviewed By: echristo, efriedma
Subscribers: efriedma, aemerson, javed.absar, kristof.beyls
Differential Revision: https://reviews.llvm.org/D35627
llvm-svn: 310486
Currently, far jmp/call which utilizes a 48bit memory operand would have been invoked via the 'lcall/ljmp' mnemonic (intel style).
This patch align those variants to formal intel spec
Differential Revision: https://reviews.llvm.org/D35846
llvm-svn: 310485
The recently improved support for `icmp` in ValueTracking
(r307304) exposes the fact that `isImplied` condition doesn't
really bail out if we hit the recursion limit (and calls
`computeKnownBits` which increases the depth and asserts).
Differential Revision: https://reviews.llvm.org/D36512
llvm-svn: 310481
Summary:
By removing FeatureNoARM implies ModeThumb, we can detect cases where a
function's target-features contain -thumb-mode (enables ARM codegen for the
function), but the architecture does not support ARM mode. Previously, the
implication caused the FeatureNoARM bit to be cleared for functions with
-thumb-mode, making the assertion in ARMSubtarget::ARMSubtarget [1]
pointless for such functions.
This assertion is the only guard against generating ARM code for
architectures without ARM codegen support. Is there a place where we
could easily generate error messages for the user? At the moment, we
would generate ARM code for Thumb-only architectures. X86 has the same
behavior as ARM, as in it only has an assertion and no error message,
but I think for ARM an error message would be helpful. What do you
think?
For the example below, `llc -mtriple=armv7m-eabi test.ll -o -` will
generate ARM assembler (or fail with an assertion error with this patch).
Note that if we run the resulting assembler through llvm-mc, we get
an appropriate error message, but not when codegen is handled
through clang.
```
define void @bar() #0 {
entry:
ret void
}
attributes #0 = { "target-features"="-thumb-mode" }
```
[1] c1f7b54cef/lib/Target/ARM/ARMSubtarget.cpp (L147)
Reviewers: t.p.northover, rengolin, peter.smith, aadg, silviu.baranga, richard.barton.arm, echristo
Reviewed By: rengolin, echristo
Subscribers: efriedma, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D35569
llvm-svn: 310476
formatv_object currently uses the implicitly defined move constructor,
but it is buggy. In typical use-cases, the problem doesn't show-up
because all calls to the move constructor are elided. Thus, the buggy
constructors are never invoked.
The issue especially shows-up when code is compiled using the
-fno-elide-constructors compiler flag. For instance, this is useful when
attempting to collect accurate code coverage statistics.
The exact issue is the following:
The Parameters data member is correctly moved, thus making the
parameters occupy a new memory location in the target
object. Unfortunately, the default copying of the Adapters blindly
copies the vector of pointers, leaving each of these pointers
referencing the parameters in the original object instead of the copied
one. These pointers quickly become dangling when the original object is
deleted. This quickly leads to crashes.
The solution is to update the Adapters pointers when performing a move.
The copy constructor isn't useful for format objects and can thus be
deleted.
This resolves PR33388.
Differential Revision: https://reviews.llvm.org/D34463
llvm-svn: 310475
Adopt a more strict approach regarding what marks should/can appear after a destination register, when operating upon an AVX512 platform.
Differential Revision: https://reviews.llvm.org/D35785
llvm-svn: 310467
isLegalAddressingMode() has recently gained the extra optional Instruction*
parameter, and therefore it can now do the job that previously only
isFoldableMemAccess() could do.
The SystemZ implementation of isLegalAddressingMode() has gained the
functionality of checking for offsets, which used to be done with
isFoldableMemAccess().
The isFoldableMemAccess() hook has been removed everywhere.
Review: Quentin Colombet, Ulrich Weigand
https://reviews.llvm.org/D35933
llvm-svn: 310463
In the recursive call to isAMCompletelyFolded(), the passed offset should be
the sum of F.BaseOffset and Fixup.Offset.
Review: Quentin Colombet.
llvm-svn: 310462
Assert that a binary expression is actually a binary expression,
rather than potientially incorrectly attempting to handle it as a
unary expression.
This resolves PR34083.
Thanks to Simonn Pilgrim for reporting the issue!
llvm-svn: 310460
The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 310457
to Nodes when removing ref edges from a RefSCC.
This map based association turns out to be pretty expensive for large
RefSCCs and pointless as we already have embedded data members inside
nodes that we use to track the DFS state. We can reuse one of those and
the map becomes unnecessary.
This also fuses the update of those numbers into the scan across the
pending stack of nodes so that we don't walk the nodes twice during the
DFS.
With this I expect the new PM to be faster than the old PM for the test
case I have been optimizing. That said, it also seems simpler and more
direct in many ways. The side storage was always pretty awkward.
The last remaining hot-spot in the profile of the LCG once this is done
will be the edge iterator walk in the DFS. I'll take a look at improving
that next.
llvm-svn: 310456
that RefSCC still connected.
This is common and can be handled much more efficiently. As soon as we
know we've covered every node in the RefSCC with the DFS, we can simply
reset our state and return. This avoids numerous data structure updates
and other complexity.
On top of other changes, this appears to get new PM back to parity with
the old PM for a large protocol buffer message source code. The dense
map updates are very hot in this function.
llvm-svn: 310451
limited batch updates.
Specifically, allow removing multiple reference edges starting from
a common source node. There are a few constraints that play into
supporting this form of batching:
1) The way updates occur during the CGSCC walk, about the most we can
functionally batch together are those with a common source node. This
also makes the batching simpler to implement, so it seems
a worthwhile restriction.
2) The far and away hottest function for large C++ files I measured
(generated code for protocol buffers) showed a huge amount of time
was spent removing ref edges specifically, so it seems worth focusing
there.
3) The algorithm for removing ref edges is very amenable to this
restricted batching. There are just both API and implementation
special casing for the non-batch case that gets in the way. Once
removed, supporting batches is nearly trivial.
This does modify the API in an interesting way -- now, we only preserve
the target RefSCC when the RefSCC structure is unchanged. In the face of
any splits, we create brand new RefSCC objects. However, all of the
users were OK with it that I could find. Only the unittest needed
interesting updates here.
How much does batching these updates help? I instrumented the compiler
when run over a very large generated source file for a protocol buffer
and found that the majority of updates are intrinsically updating one
function at a time. However, nearly 40% of the total ref edges removed
are removed as part of a batch of removals greater than one, so these
are the cases batching can help with.
When compiling the IR for this file with 'opt' and 'O3', this patch
reduces the total time by 8-9%.
Differential Revision: https://reviews.llvm.org/D36352
llvm-svn: 310450
It is possible that dependent instruction may access memory.
In this case we must reject optimization because the memory change will
be visible in null handler basic block. So we will execute an instruction which
we must not execute if check fails.
Reviewers: sanjoy, reames
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36392
llvm-svn: 310443
For some reason I didn't see this failure the first time. The
output format changed slightly, so we just have to update the
test for the new format.
llvm-svn: 310442
