statepoint instruction uses tied-def registers to represent live gc value which
is use and def at the same time on a call.
At the same time invoke statepoint instruction is a last split point which can throw and
jump to landing pad.
As a result we have instructon which is last split point with tied-defs registers and
we need to teach Greedy RA to work with it.
The option -use-registers-for-gc-values-in-landing-pad controls whether statepoint lowering
will generate tied-defs for invoke statepoint and is off by default now.
To resolve all issues the following changes has been done.
1) Last Split point for invoke statepoint should be statepoint itself
If statepoint has a def it is a relocated gc pointer and it should be available in landing pad.
So we cannot split interval after statepoint at end of basic block.
2) Do not split interval on tied-def
If end of interval for overlap utility is a use which has tied-def we
should not split interval on this instruction due to in this case use
and def may have different registers and it breaks tied-def property.
3) Take into account Last Split Point for enterIntvAtEnd
If the use after Last Split Point is a def so it should be tied-def and
we can take the def of the tied-use as ParentVNI and thus
tied-use and tied-def will be live in resulting interval.
4) Handle the case when def is after LIP in InlineSpiller
If def of LI is after last insertion point of basic block we cannot hoist in this BB.
The example of such instruction is invoke statepoint where def represents the
relocated live gc pointer. Invoke is a last insertion point and its def is located after it.
In this case there is no place to insert spill and we bail out.
5) Fix removeBackCopies to account empty copies
RegAssignMap cannot hold empty interval, so do not set stop
to kill value if it produces empty interval.
This can happen if we remove back-copy and right before that we have another
back-copy.
For example, for parent %0 we can get
%1 = COPY %0
%2 = COPY %0
while we removing %2 we cannot set kill for %1 due to its empty.
6) Do not hoist copy to BB if its def is after LSP
If the parent def is a LastSplitPoint or later we cannot hoist copy to this basic block
because inserted copy (or re-materialization) will be located before the def.
All parts have been reviewed separately as follows:
https://reviews.llvm.org/D100747https://reviews.llvm.org/D100748https://reviews.llvm.org/D100750https://reviews.llvm.org/D100927https://reviews.llvm.org/D100945https://reviews.llvm.org/D101028
Reviewers: reames, rnk, void, MatzeB, wmi, qcolombet
Reviewed By: reames, qcolombet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D101150
VirtRegAuxInfo is an extensibility point, so the register allocator's
decision on which implementation to use should be communicated to the
other users - namely, LiveRangeEdit.
Differential Revision: https://reviews.llvm.org/D96898
Following on from D87757 "[SplitKit] Only copy live lanes", in
SplitEditor::addDeadDef, when we're checking whether the parent live
interval has a subrange defining the same lanes, tolerate the case
where the parent subrange defines a superset of the lanes. This can
happen when the child subrange comes from SplitEditor::buildCopy
decomposing a partial copy into a sequence of subreg copies that cover
the required lanes.
Differential Revision: https://reviews.llvm.org/D88020
Before this instruction supported output values, it fit fairly
naturally as a terminator. However, being a terminator while also
supporting outputs causes some trouble, as the physreg->vreg COPY
operations cannot be in the same block.
Modeling it as a non-terminator allows it to be handled the same way
as invoke is handled already.
Most of the changes here were created by auditing all the existing
users of MachineBasicBlock::isEHPad() and
MachineBasicBlock::hasEHPadSuccessor(), and adding calls to
isInlineAsmBrIndirectTarget or mayHaveInlineAsmBr, as appropriate.
Reviewed By: nickdesaulniers, void
Differential Revision: https://reviews.llvm.org/D79794
Summary:
Refactor LiveRangeCalc such that it is now split into two classes
The objective is to split all the "register specific" logic away
from LiveRangeCalc.
The two new classes created are:
- LiveRangeCalc - is meant as a generic class to compute and modify
live ranges in a generic way. This class should deal only with
SlotIndices and VNInfo objects.
- LiveIntervalCals - is meant to be equivalent to the old LiveRangeCalc.
It computes the liveness virtual registers tracked by a LiveInterval
object.
With this refactoring LiveRangeCalc can be used to implement tracking of
liveness of LiveRanges that represent other things than just registers.
Subscribers: MatzeB, qcolombet, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76584
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
For the AMDGPU target if a MBB contains exec mask restore preamble, SplitEditor may get state when it cannot insert a spill instruction.
E.g. for a MIR
bb.100:
%1 = S_OR_SAVEEXEC_B64 %2, implicit-def $exec, implicit-def $scc, implicit $exec
and if the regalloc will try to allocate a virtreg to the physreg already assigned to virtreg %1, it should insert spill instruction before the S_OR_SAVEEXEC_B64 instruction.
But it is not possible since can generate incorrect code in terms of exec mask.
The change makes regalloc to ignore such physreg candidates.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D52052
llvm-svn: 343004
Example situation:
```
BB0:
%0 = ...
use %0
; ...
condjump BB1
jmp BB2
BB1:
%0 = ... ; rematerialized def from above (from earlier split step)
jmp BB2
BB2:
; ...
use %0
```
%0 will have a live interval with 3 value numbers (for the BB0, BB1 and
BB2 parts). Now SplitKit tries and succeeds in rematerializing the value
number in BB2 (This only works because it is a secondary split so
SplitKit is can trace this back to a single original def).
We need to recompute all live ranges affected by a value number that we
rematerialize. The case that we missed before is that when the value
that is rematerialized is at a join (Phi VNI) then we also have to
recompute liveness for the predecessor VNIs.
rdar://35699130
Differential Revision: https://reviews.llvm.org/D42667
llvm-svn: 324039
- This fixes a bug where subregister incompatible with the vregs register
class where used.
- Implement the case where multiple copies are necessary to cover a
given lanemask.
Differential Revision: https://reviews.llvm.org/D30438
llvm-svn: 298025
The function extendPHIRanges checks the main range of the original live
interval, even when dealing with a subrange. This could also lead to an
assert when the subrange is not live at the extension point, but the
main range is. To avoid this, check the corresponding subrange of the
original live range, instead of always checking the main range.
Review (as a part of a bigger set of changes):
https://reviews.llvm.org/D26359
llvm-svn: 287571
The register allocator can split a live interval of a register into a set
of smaller intervals. After the allocation of registers is complete, the
rewriter will modify the IR to replace virtual registers with the corres-
ponding physical registers. At this stage, if a register corresponding
to a subregister of a virtual register is used, the rewriter will check
if that subregister is undefined, and if so, it will add the <undef> flag
to the machine operand. The function verifying liveness of the subregis-
ter would assume that it is undefined, unless any of the subranges of the
live interval proves otherwise.
The problem is that the live intervals created during splitting do not
have any subranges, even if the original parent interval did. This could
result in the <undef> flag placed on a register that is actually defined.
Differential Revision: http://reviews.llvm.org/D21189
llvm-svn: 279625
Because isReallyTriviallyReMaterializableGeneric puts many limits on
rematerializable instructions, this fix can prevent instructions with
tied virtual operands and instructions with virtual register uses from
being kept in DeadRemat, so as to workaround the live interval consistency
problem for the dummy instructions kept in DeadRemat.
But we still need to fix the live interval consistency problem. This patch
is just a short time relieve. PR28464 has been filed as a reminder.
Differential Revision: http://reviews.llvm.org/D19486
llvm-svn: 274928
InsertPointAnalysis.
Because both split and spill hoisting want to use LastSplitPoint computation
result, extract the LastSplitPoint computation from SplitAnalysis class which
also contains a bunch of other analysises only related to split.
Differential Revision: http://reviews.llvm.org/D20027.
llvm-svn: 269248
two fixes with one about error verify-regalloc reported, and
another about live range update of phi after rematerialization.
r265547:
Replace analyzeSiblingValues with new algorithm to fix its compile
time issue. The patch is to solve PR17409 and its duplicates.
analyzeSiblingValues is a N x N complexity algorithm where N is
the number of siblings generated by reg splitting. Although it
causes siginificant compile time issue when N is large, it is also
important for performance since it removes redundent spills and
enables rematerialization.
To solve the compile time issue, the patch removes analyzeSiblingValues
and replaces it with lower cost alternatives containing two parts. The
first part creates a new spill hoisting method in postOptimization of
register allocation. It does spill hoisting at once after all the spills
are generated instead of inside every instance of selectOrSplit. The
second part queries the define expr of the original register for
rematerializaiton and keep it always available during register allocation
even if it is already dead. It deletes those dead instructions only in
postOptimization. With the two parts in the patch, it can remove
analyzeSiblingValues without sacrificing performance.
Patches on top of r265547:
r265610 "Fix the compare-clang diff error introduced by r265547."
r265639 "Fix the sanitizer bootstrap error in r265547."
r265657 "InlineSpiller.cpp: Escap \@ in r265547. [-Wdocumentation]"
Differential Revision: http://reviews.llvm.org/D15302
Differential Revision: http://reviews.llvm.org/D18934
Differential Revision: http://reviews.llvm.org/D18935
Differential Revision: http://reviews.llvm.org/D18936
llvm-svn: 266162
It caused PR27275: "ARM: Bad machine code: Using an undefined physical register"
Also reverting the following commits that were landed on top:
r265610 "Fix the compare-clang diff error introduced by r265547."
r265639 "Fix the sanitizer bootstrap error in r265547."
r265657 "InlineSpiller.cpp: Escap \@ in r265547. [-Wdocumentation]"
llvm-svn: 265790
when DenseMap growed and moved memory. I verified it fixed the bootstrap
problem on x86_64-linux-gnu but I cannot verify whether it fixes
the bootstrap error on clang-ppc64be-linux. I will watch the build-bot
result closely.
Replace analyzeSiblingValues with new algorithm to fix its compile
time issue. The patch is to solve PR17409 and its duplicates.
analyzeSiblingValues is a N x N complexity algorithm where N is
the number of siblings generated by reg splitting. Although it
causes siginificant compile time issue when N is large, it is also
important for performance since it removes redundent spills and
enables rematerialization.
To solve the compile time issue, the patch removes analyzeSiblingValues
and replaces it with lower cost alternatives containing two parts. The
first part creates a new spill hoisting method in postOptimization of
register allocation. It does spill hoisting at once after all the spills
are generated instead of inside every instance of selectOrSplit. The
second part queries the define expr of the original register for
rematerializaiton and keep it always available during register allocation
even if it is already dead. It deletes those dead instructions only in
postOptimization. With the two parts in the patch, it can remove
analyzeSiblingValues without sacrificing performance.
Differential Revision: http://reviews.llvm.org/D15302
llvm-svn: 265547
time issue. The patch is to solve PR17409 and its duplicates.
analyzeSiblingValues is a N x N complexity algorithm where N is
the number of siblings generated by reg splitting. Although it
causes siginificant compile time issue when N is large, it is also
important for performance since it removes redundent spills and
enables rematerialization.
To solve the compile time issue, the patch removes analyzeSiblingValues
and replaces it with lower cost alternatives containing two parts. The
first part creates a new spill hoisting method in postOptimization of
register allocation. It does spill hoisting at once after all the spills
are generated instead of inside every instance of selectOrSplit. The
second part queries the define expr of the original register for
rematerializaiton and keep it always available during register allocation
even if it is already dead. It deletes those dead instructions only in
postOptimization. With the two parts in the patch, it can remove
analyzeSiblingValues without sacrificing performance.
Differential Revision: http://reviews.llvm.org/D15302
llvm-svn: 265309
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
The main advantages here are way better heuristics, taking into account not
just loop depth but also __builtin_expect and other static heuristics and will
eventually learn how to use profile info. Most of the work in this patch is
pushing the MachineBlockFrequencyInfo analysis into the right places.
This is good for a 5% speedup on zlib's deflate (x86_64), there were some very
unfortunate spilling decisions in its hottest loop in longest_match(). Other
benchmarks I tried were mostly neutral.
This changes register allocation in subtle ways, update the tests for it.
2012-02-20-MachineCPBug.ll was deleted as it's very fragile and the instruction
it looked for was gone already (but the FileCheck pattern picked up unrelated
stuff).
llvm-svn: 184105
Delete the alternative implementation in LiveIntervalAnalysis.
These functions computed the same thing, but SplitAnalysis caches the
result.
llvm-svn: 147911
When a back-copy is hoisted to the nearest common dominator, keep
looking up the dominator tree for a less loopy dominator, and place the
back-copy there instead.
Don't do this when a single existing back-copy dominates all the others.
Assume the client knows what he is doing, and keep the dominating
back-copy.
This prevents us from hoisting back-copies into loops in most cases. If
a value is defined in a loop with multiple exits, we may still hoist
back-copies into that loop. That is the speed/size tradeoff.
llvm-svn: 139698
When a ParentVNI maps to multiple defs in a new interval, its live range
may still be derived directly from RegAssign by transferValues().
On the other hand, when instructions have been rematerialized or
hoisted, it may be necessary to completely recompute live ranges using
LiveRangeCalc::extend() to all uses.
Use a bit in the value map to indicate that a live range must be
recomputed. Rename markComplexMapped() to forceRecompute().
This fixes some live range verification errors when
-split-spill-mode=size hoists back-copies by recomputing source ranges
when RegAssign kills can't be moved.
llvm-svn: 139660
Whenever the complement interval is defined by multiple copies of the
same value, hoist those back-copies to the nearest common dominator.
This ensures that at most one copy is inserted per value in the
complement inteval, and no phi-defs are needed.
llvm-svn: 139651
This function is used to flag values where the complement interval may
overlap other intervals. Call it from overlapIntv, and use the flag to
fully recompute those live ranges in transferValues().
llvm-svn: 139612
The complement interval may overlap the other intervals created, so use
a separate LiveRangeCalc instance to compute its live range.
A LiveRangeCalc instance can only be shared among non-overlapping
intervals.
llvm-svn: 139603
SplitKit will soon need two copies of these data structures, and the
algorithms will also be useful when LiveIntervalAnalysis becomes
independent of LiveVariables.
llvm-svn: 139572
SplitKit always computes a complement live range to cover the places
where the original live range was live, but no explicit region has been
allocated.
Currently, the complement live range is created to be as small as
possible - it never overlaps any of the regions. This minimizes
register pressure, but if the complement is going to be spilled anyway,
that is not very important. The spiller will eliminate redundant
spills, and hoist others by making the spill slot live range overlap
some of the regions created by splitting. Stack slots are cheap.
This patch adds the interface to enable spill modes in SplitKit. In
spill mode, SplitKit will assume that the complement is going to spill,
so it will allow it to overlap regions in order to avoid back-copies.
By doing some of the spiller's work early, the complement live range
becomes simpler. In some cases, it can become much simpler because no
extra PHI-defs are required. This will speed up both splitting and
spilling.
This is only the interface to enable spill modes, no implementation yet.
llvm-svn: 139500
