mirror of
https://github.com/RPCS3/llvm-mirror.git
synced 2024-11-22 18:54:02 +01:00
b5b6e8e953
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
250 lines
11 KiB
LLVM
250 lines
11 KiB
LLVM
; Test 64-bit floating-point strict comparison. The tests assume a z10
|
|
; implementation of select, using conditional branches rather than LOCGR.
|
|
;
|
|
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 \
|
|
; RUN: | FileCheck -check-prefix=CHECK -check-prefix=CHECK-SCALAR %s
|
|
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z13 -verify-machineinstrs\
|
|
; RUN: | FileCheck -check-prefix=CHECK -check-prefix=CHECK-VECTOR %s
|
|
|
|
declare double @foo()
|
|
|
|
; Check comparison with registers.
|
|
define i64 @f1(i64 %a, i64 %b, double %f1, double %f2) #0 {
|
|
; CHECK-LABEL: f1:
|
|
; CHECK: cdbr %f0, %f2
|
|
; CHECK-SCALAR-NEXT: ber %r14
|
|
; CHECK-SCALAR: lgr %r2, %r3
|
|
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
|
|
; CHECK: br %r14
|
|
%cond = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %f1, double %f2,
|
|
metadata !"oeq",
|
|
metadata !"fpexcept.strict") #0
|
|
%res = select i1 %cond, i64 %a, i64 %b
|
|
ret i64 %res
|
|
}
|
|
|
|
; Check the low end of the CDB range.
|
|
define i64 @f2(i64 %a, i64 %b, double %f1, double *%ptr) #0 {
|
|
; CHECK-LABEL: f2:
|
|
; CHECK: cdb %f0, 0(%r4)
|
|
; CHECK-SCALAR-NEXT: ber %r14
|
|
; CHECK-SCALAR: lgr %r2, %r3
|
|
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
|
|
; CHECK: br %r14
|
|
%f2 = load double, double *%ptr
|
|
%cond = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %f1, double %f2,
|
|
metadata !"oeq",
|
|
metadata !"fpexcept.strict") #0
|
|
%res = select i1 %cond, i64 %a, i64 %b
|
|
ret i64 %res
|
|
}
|
|
|
|
; Check the high end of the aligned CDB range.
|
|
define i64 @f3(i64 %a, i64 %b, double %f1, double *%base) #0 {
|
|
; CHECK-LABEL: f3:
|
|
; CHECK: cdb %f0, 4088(%r4)
|
|
; CHECK-SCALAR-NEXT: ber %r14
|
|
; CHECK-SCALAR: lgr %r2, %r3
|
|
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
|
|
; CHECK: br %r14
|
|
%ptr = getelementptr double, double *%base, i64 511
|
|
%f2 = load double, double *%ptr
|
|
%cond = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %f1, double %f2,
|
|
metadata !"oeq",
|
|
metadata !"fpexcept.strict") #0
|
|
%res = select i1 %cond, i64 %a, i64 %b
|
|
ret i64 %res
|
|
}
|
|
|
|
; Check the next doubleword up, which needs separate address logic.
|
|
; Other sequences besides this one would be OK.
|
|
define i64 @f4(i64 %a, i64 %b, double %f1, double *%base) #0 {
|
|
; CHECK-LABEL: f4:
|
|
; CHECK: aghi %r4, 4096
|
|
; CHECK: cdb %f0, 0(%r4)
|
|
; CHECK-SCALAR-NEXT: ber %r14
|
|
; CHECK-SCALAR: lgr %r2, %r3
|
|
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
|
|
; CHECK: br %r14
|
|
%ptr = getelementptr double, double *%base, i64 512
|
|
%f2 = load double, double *%ptr
|
|
%cond = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %f1, double %f2,
|
|
metadata !"oeq",
|
|
metadata !"fpexcept.strict") #0
|
|
%res = select i1 %cond, i64 %a, i64 %b
|
|
ret i64 %res
|
|
}
|
|
|
|
; Check negative displacements, which also need separate address logic.
|
|
define i64 @f5(i64 %a, i64 %b, double %f1, double *%base) #0 {
|
|
; CHECK-LABEL: f5:
|
|
; CHECK: aghi %r4, -8
|
|
; CHECK: cdb %f0, 0(%r4)
|
|
; CHECK-SCALAR-NEXT: ber %r14
|
|
; CHECK-SCALAR: lgr %r2, %r3
|
|
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
|
|
; CHECK: br %r14
|
|
%ptr = getelementptr double, double *%base, i64 -1
|
|
%f2 = load double, double *%ptr
|
|
%cond = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %f1, double %f2,
|
|
metadata !"oeq",
|
|
metadata !"fpexcept.strict") #0
|
|
%res = select i1 %cond, i64 %a, i64 %b
|
|
ret i64 %res
|
|
}
|
|
|
|
; Check that CDB allows indices.
|
|
define i64 @f6(i64 %a, i64 %b, double %f1, double *%base, i64 %index) #0 {
|
|
; CHECK-LABEL: f6:
|
|
; CHECK: sllg %r1, %r5, 3
|
|
; CHECK: cdb %f0, 800(%r1,%r4)
|
|
; CHECK-SCALAR-NEXT: ber %r14
|
|
; CHECK-SCALAR: lgr %r2, %r3
|
|
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
|
|
; CHECK: br %r14
|
|
%ptr1 = getelementptr double, double *%base, i64 %index
|
|
%ptr2 = getelementptr double, double *%ptr1, i64 100
|
|
%f2 = load double, double *%ptr2
|
|
%cond = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %f1, double %f2,
|
|
metadata !"oeq",
|
|
metadata !"fpexcept.strict") #0
|
|
%res = select i1 %cond, i64 %a, i64 %b
|
|
ret i64 %res
|
|
}
|
|
|
|
; Check that comparisons of spilled values can use CDB rather than CDBR.
|
|
define double @f7(double *%ptr0) #0 {
|
|
; CHECK-LABEL: f7:
|
|
; CHECK: brasl %r14, foo@PLT
|
|
; CHECK-SCALAR: cdb {{%f[0-9]+}}, 160(%r15)
|
|
; CHECK: br %r14
|
|
%ptr1 = getelementptr double, double *%ptr0, i64 2
|
|
%ptr2 = getelementptr double, double *%ptr0, i64 4
|
|
%ptr3 = getelementptr double, double *%ptr0, i64 6
|
|
%ptr4 = getelementptr double, double *%ptr0, i64 8
|
|
%ptr5 = getelementptr double, double *%ptr0, i64 10
|
|
%ptr6 = getelementptr double, double *%ptr0, i64 12
|
|
%ptr7 = getelementptr double, double *%ptr0, i64 14
|
|
%ptr8 = getelementptr double, double *%ptr0, i64 16
|
|
%ptr9 = getelementptr double, double *%ptr0, i64 18
|
|
%ptr10 = getelementptr double, double *%ptr0, i64 20
|
|
|
|
%val0 = load double, double *%ptr0
|
|
%val1 = load double, double *%ptr1
|
|
%val2 = load double, double *%ptr2
|
|
%val3 = load double, double *%ptr3
|
|
%val4 = load double, double *%ptr4
|
|
%val5 = load double, double *%ptr5
|
|
%val6 = load double, double *%ptr6
|
|
%val7 = load double, double *%ptr7
|
|
%val8 = load double, double *%ptr8
|
|
%val9 = load double, double *%ptr9
|
|
%val10 = load double, double *%ptr10
|
|
|
|
%ret = call double @foo() #0
|
|
|
|
%cmp0 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val0,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp1 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val1,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp2 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val2,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp3 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val3,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp4 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val4,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp5 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val5,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp6 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val6,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp7 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val7,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp8 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val8,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp9 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val9,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
%cmp10 = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %ret, double %val10,
|
|
metadata !"olt",
|
|
metadata !"fpexcept.strict") #0
|
|
|
|
%sel0 = select i1 %cmp0, double %ret, double 0.0
|
|
%sel1 = select i1 %cmp1, double %sel0, double 1.0
|
|
%sel2 = select i1 %cmp2, double %sel1, double 2.0
|
|
%sel3 = select i1 %cmp3, double %sel2, double 3.0
|
|
%sel4 = select i1 %cmp4, double %sel3, double 4.0
|
|
%sel5 = select i1 %cmp5, double %sel4, double 5.0
|
|
%sel6 = select i1 %cmp6, double %sel5, double 6.0
|
|
%sel7 = select i1 %cmp7, double %sel6, double 7.0
|
|
%sel8 = select i1 %cmp8, double %sel7, double 8.0
|
|
%sel9 = select i1 %cmp9, double %sel8, double 9.0
|
|
%sel10 = select i1 %cmp10, double %sel9, double 10.0
|
|
|
|
ret double %sel10
|
|
}
|
|
|
|
; Check comparison with zero.
|
|
define i64 @f8(i64 %a, i64 %b, double %f) #0 {
|
|
; CHECK-LABEL: f8:
|
|
; CHECK-SCALAR: ltdbr %f0, %f0
|
|
; CHECK-SCALAR-NEXT: ber %r14
|
|
; CHECK-SCALAR: lgr %r2, %r3
|
|
; CHECK-VECTOR: ltdbr %f0, %f0
|
|
; CHECK-VECTOR-NEXT: locgrne %r2, %r3
|
|
; CHECK: br %r14
|
|
%cond = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %f, double 0.0,
|
|
metadata !"oeq",
|
|
metadata !"fpexcept.strict") #0
|
|
%res = select i1 %cond, i64 %a, i64 %b
|
|
ret i64 %res
|
|
}
|
|
|
|
; Check the comparison can be reversed if that allows CDB to be used,
|
|
define i64 @f9(i64 %a, i64 %b, double %f2, double *%ptr) #0 {
|
|
; CHECK-LABEL: f9:
|
|
; CHECK: cdb %f0, 0(%r4)
|
|
; CHECK-SCALAR-NEXT: blr %r14
|
|
; CHECK-SCALAR: lgr %r2, %r3
|
|
; CHECK-VECTOR-NEXT: locgrnl %r2, %r3
|
|
; CHECK: br %r14
|
|
%f1 = load double, double *%ptr
|
|
%cond = call i1 @llvm.experimental.constrained.fcmp.f64(
|
|
double %f1, double %f2,
|
|
metadata !"ogt",
|
|
metadata !"fpexcept.strict") #0
|
|
%res = select i1 %cond, i64 %a, i64 %b
|
|
ret i64 %res
|
|
}
|
|
|
|
attributes #0 = { strictfp }
|
|
|
|
declare i1 @llvm.experimental.constrained.fcmp.f64(double, double, metadata, metadata)
|
|
|