This patch adds new load/store instructions for integer scalar types
which can be used for X-Form when fed by add with an @tls relocation.
Differential Revision: https://reviews.llvm.org/D43315
llvm-svn: 327635
As discussed on D44428 and PR36726, this patch splits off WriteFMove/WriteVecMove, WriteFLoad/WriteVecLoad and WriteFStore/WriteVecStore scheduler classes to permit vectors to be handled separately from gpr/scalar types.
I've minimised the diff here by only moving various basic SSE/AVX vector instructions across - we can fix the rest when called for. This does fix the MOVDQA vs MOVAPS/MOVAPD discrepancies mentioned on D44428.
Differential Revision: https://reviews.llvm.org/D44471
llvm-svn: 327630
This matcher implementation appears to be slightly more efficient than
the generic constant check that it is replacing because every use was
for matching FP patterns, but the previous code would check int and
pointer type nulls too.
llvm-svn: 327627
From the LangRef definition for frem:
"The value produced is the floating-point remainder of the two operands.
This is the same output as a libm ‘fmod‘ function, but without any
possibility of setting errno. The remainder has the same sign as the
dividend. This instruction is assumed to execute in the default
floating-point environment."
llvm-svn: 327626
This is a follow up of the AArch64 FP16 intrinsics work;
the codegen tests had not been added yet.
Differential Revision: https://reviews.llvm.org/D44510
llvm-svn: 327624
When hoisting common code from the "then" and "else" branches of a condition
to before the "if", the HoistThenElseCodeToIf routine will attempt to merge
the debug location associated with the two original copies of the hoisted
instruction.
This is a problem in the special case where the hoisted instruction is a
debug info intrinsic, since for those the debug location is considered
part of the intrinsic and attempting to modify it may resut in invalid
IR. This is the underlying cause of PR36410.
This patch fixes the problem by handling debug info intrinsics specially:
instead of hoisting one copy and merging the two locations, the code now
simply hoists both copies, each with its original location intact. Note
that this is still only done in the case where both original copies are
otherwise (i.e. apart from location metadata) identical.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D44312
llvm-svn: 327622
This patch sorts local variables by lexical scope and emits them inside
an appropriate S_BLOCK32 CodeView symbol.
Differential Revision: https://reviews.llvm.org/D42926
llvm-svn: 327620
There are two nontrivial details here:
* Loop structure update interface is quite different with new pass manager,
so the code to add new loops was factored out
* BranchProbabilityInfo is not a loop analysis, so it can not be just getResult'ed from
within the loop pass. It cant even be queried through getCachedResult as LoopCanonicalization
sequence (e.g. LoopSimplify) might invalidate BPI results.
Complete solution for BPI will likely take some time to discuss and figure out,
so for now this was partially solved by making BPI optional in IRCE
(skipping a couple of profitability checks if it is absent).
Most of the IRCE tests got their corresponding new-pass-manager variant enabled.
Only two of them depend on BPI, both marked with TODO, to be turned on when BPI
starts being available for loop passes.
Reviewers: chandlerc, mkazantsev, sanjoy, asbirlea
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D43795
llvm-svn: 327619
Summary:
Before this patch call graph is like this in the LoopUnrollPass:
tryToUnrollLoop
ApproximateLoopSize
collectEphemeralValues
/* Use collected ephemeral values */
computeUnrollCount
analyzeLoopUnrollCost
/* Bail out from the analysis if loop contains CallInst */
This patch moves collection of the ephemeral values to the tryToUnrollLoop
function and passes the collected values into both ApproximateLoopsize (as
before) and additionally starts using them in analyzeLoopUnrollCost:
tryToUnrollLoop
collectEphemeralValues
ApproximateLoopSize(EphValues)
/* Use EphValues */
computeUnrollCount(EphValues)
analyzeLoopUnrollCost(EphValues)
/* Ignore ephemeral values - they don't contribute to the final cost */
/* Bail out from the analysis if loop contains CallInst */
Reviewers: mzolotukhin, evstupac, sanjoy
Reviewed By: evstupac
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43931
llvm-svn: 327617
Methods `computeExitLimitFromCondCached` and `computeExitLimitFromCondImpl` take
true and false branches as parameters and only use them for asserts and for identifying
whether true/false branch belongs to the loop (which can be done once earlier). This fact
complicates generalization of exit limit computation logic on guards because the guards
don't have blocks to which they go in case of failure explicitly.
The motivation of this patch is that currently this part of SCEV knows nothing about guards
and only works with explicit branches. As result, it fails to prove that a loop
for (i = 0; i < 100; i++)
guard(i < 10);
exits after 10th iteration, while in the equivalent example
for (i = 0; i < 100; i++)
if (i >= 10) break;
SCEV easily proves this fact. We are going to change it in near future, and this is why
we need to make these methods operate on more abstract level.
This patch refactors this code to get rid of these parameters as meaningless and prepare
ground for teaching these methods to work with guards as well as they work with explicit
branching instructions.
Differential Revision: https://reviews.llvm.org/D44419
llvm-svn: 327615
There is no 512 bit addsub instruction, but we partially match it handle fmaddsub matching. We explicitly bail out for 512 bit vectors after failing the fmaddsub match, but we had no test coverage for that bail out.
We might want to consider splitting and using 256 bit instructions instead of the long sequence seen here.
llvm-svn: 327605
Summary:
Some PDB symbols do not have a valid VA or RVA but have Addr by Section and Offset. For example, a variable in thread-local storage has the following properties:
get_addressOffset: 0
get_addressSection: 5
get_lexicalParentId: 2
get_name: g_tls
get_symIndexId: 12
get_typeId: 4
get_dataKind: 6
get_symTag: 7
get_locationType: 2
This change provides a new method to locate line numbers by Section and Offset from those symbols.
Reviewers: zturner, rnk, llvm-commits
Subscribers: asmith, JDevlieghere
Differential Revision: https://reviews.llvm.org/D44407
llvm-svn: 327601
Summary:
This variable is largely going unused; aside from reporting number of instructions for in DEBUG builds.
The only use of NumInstructions is in debug output to represent the LoopSize. That value can be can be misleading as it also includes metadata instructions (e.g., DBG_VALUE) which have no real impact. If we do choose to keep this around, we probably should guard it by a DEBUG macro, as it's not used in production builds.
Reviewers: majnemer, congh, rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D44495
llvm-svn: 327589
These should all be folded. The vector tests need to have
m_AnyZero updated to ignore undef elements, but we need to
be careful not to return the existing value in that case
and unintentionally propagate undef.
llvm-svn: 327585
Summary:
Local values are constants, global addresses, and stack addresses that
can't be folded into the instruction that uses them. For example, when
storing the address of a global variable into memory, we need to
materialize that address into a register.
FastISel doesn't want to materialize any given local value more than
once, so it generates all local value materialization code at
EmitStartPt, which always dominates the current insertion point. This
allows it to maintain a map of local value registers, and it knows that
the local value area will always dominate the current insertion point.
The downside is that local value instructions are always emitted without
a source location. This is done to prevent jumpy line tables, but it
means that the local value area will be considered part of the previous
statement. Consider this C code:
call1(); // line 1
++global; // line 2
++global; // line 3
call2(&global, &local); // line 4
Today we end up with assembly and line tables like this:
.loc 1 1
callq call1
leaq global(%rip), %rdi
leaq local(%rsp), %rsi
.loc 1 2
addq $1, global(%rip)
.loc 1 3
addq $1, global(%rip)
.loc 1 4
callq call2
The LEA instructions in the local value area have no source location and
are treated as being on line 1. Stepping through the code in a debugger
and correlating it with the assembly won't make much sense, because
these materializations are only required for line 4.
This is actually problematic for the VS debugger "set next statement"
feature, which effectively assumes that there are no registers live
across statement boundaries. By sinking the local value code into the
statement and fixing up the source location, we can make that feature
work. This was filed as https://bugs.llvm.org/show_bug.cgi?id=35975 and
https://crbug.com/793819.
This change is obviously not enough to make this feature work reliably
in all cases, but I felt that it was worth doing anyway because it
usually generates smaller, more comprehensible -O0 code. I measured a
0.12% regression in code generation time with LLC on the sqlite3
amalgamation, so I think this is worth doing.
There are some special cases worth calling out in the commit message:
1. local values materialized for phis
2. local values used by no-op casts
3. dead local value code
Local values can be materialized for phis, and this does not show up as
a vreg use in MachineRegisterInfo. In this case, if there are no other
uses, this patch sinks the value to the first terminator, EH label, or
the end of the BB if nothing else exists.
Local values may also be used by no-op casts, which adds the register to
the RegFixups table. Without reversing the RegFixups map direction, we
don't have enough information to sink these instructions.
Lastly, if the local value register has no other uses, we can delete it.
This comes up when fastisel tries two instruction selection approaches
and the first materializes the value but fails and the second succeeds
without using the local value.
Reviewers: aprantl, dblaikie, qcolombet, MatzeB, vsk, echristo
Subscribers: dotdash, chandlerc, hans, sdardis, amccarth, javed.absar, zturner, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43093
llvm-svn: 327581
Get rid of the "; mem:" suffix and use the one we use in MIR: ":: (load 2)".
rdar://38163529
Differential Revision: https://reviews.llvm.org/D42377
llvm-svn: 327580
If we have an invariant.start with no corresponding invariant.end, then the memory location becomes invariant indefinitely after the invariant.start. As a result, anything dominated by the start is guaranteed to see the value the memory location had when the invariant.start executed.
This patch adds an AvailableInvariants table which tracks the generation a particular memory location became invariant and then uses that information to allow value forwarding that would otherwise be disallowed by potentially aliasing stores. (Reminder: In EarlyCSE everything clobbers everything by default.)
This should be compatible with the MemorySSA variant, but design is generational. We can and should add first class support for invariant.start within MemorySSA at a later time. I took a quick look at doing so, but probably need some input from a MemorySSA expert.
Differential Revision: https://reviews.llvm.org/D43716
llvm-svn: 327577
This reverts commit r327566, it breaks
test/ExecutionEngine/OrcMCJIT/test-global-ctors.ll.
The test doesn't crash with a stack trace, unfortunately. It merely
returns 1 as the exit code.
ASan didn't produce a report, and I reproduced this on my Linux machine
and Windows box.
llvm-svn: 327576
As shown in:
https://bugs.llvm.org/show_bug.cgi?id=27151
...the existing fold could miscompile when X is NaN.
The fold was also dependent on 'ninf' but that's not necessary.
From IEEE-754 (with default rounding which we can assume for these opcodes):
"When the sum of two operands with opposite signs (or the difference of two
operands with like signs) is exactly zero, the sign of that sum (or difference)
shall be +0...However, x + x = x − (−x) retains the same sign as x even when
x is zero."
llvm-svn: 327575
Optionally allow the order of restoring the callee-saved registers in the
epilogue to be reversed.
The flag -reverse-csr-restore-seq generates the following code:
```
stp x26, x25, [sp, #-64]!
stp x24, x23, [sp, #16]
stp x22, x21, [sp, #32]
stp x20, x19, [sp, #48]
; [..]
ldp x24, x23, [sp, #16]
ldp x22, x21, [sp, #32]
ldp x20, x19, [sp, #48]
ldp x26, x25, [sp], #64
ret
```
Note how the CSRs are restored in the same order as they are saved.
One exception to this rule is the last `ldp`, which allows us to merge
the stack adjustment and the ldp into a post-index ldp. This is done by
first generating:
ldp x26, x27, [sp]
add sp, sp, #64
which gets merged by the arm64 load store optimizer into
ldp x26, x25, [sp], #64
The flag is disabled by default.
llvm-svn: 327569
Layer implementations typically mutate module state, and this is better
reflected by having layers own the Module they are operating on.
llvm-svn: 327566
Summary:
I noticed that clang will emit variables such as %indirect-arg-temp when
running update_cc1_test_checks.py and therefore update_cc1_test_checks.py
wasn't adding FileCheck captures for those variables.
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44459
llvm-svn: 327564
Summary:
We already emit relocations in this case when the "incremental linker
compatible" flag is set, but it turns out these relocations are also
required for /guard:cf. Now that we have two use cases for this
behavior, let's make it unconditional to try to keep things simple.
We never hit this problem in Clang because it always sets the
"incremental linker compatible" flag when targeting MSVC. However, LLD
LTO doesn't set this flag, so we'd get CFG failures at runtime when
using ThinLTO and /guard:cf. We probably don't want LLD LTO to set the
"incremental linker compatible" assembler flag, since this has nothing
to do with incremental linking, and we don't need to timestamp LTO
temporary objects.
Fixes PR36624.
Reviewers: inglorion, espindola, majnemer
Subscribers: mehdi_amini, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D44485
llvm-svn: 327557
I removed this in r316797 because the coverage report showed no coverage and I thought it should have been handled by the auto generated table. I now see that there is code that bypasses the table if the shift amount is out of bounds.
This adds back the code. We'll codegen out of bounds i8 shifts to effectively (amount & 0x1f). The 0x1f is a strange quirk of x86 that shift amounts are always masked to 5-bits(except 64-bits). So if the masked value is still out bounds the result will be 0.
Fixes PR36731.
llvm-svn: 327540
Summary:
This pattern came up in PR36682 / D44390
https://bugs.llvm.org/show_bug.cgi?id=36682https://reviews.llvm.org/D44390https://godbolt.org/g/oKvT5H
Looking at the IR pattern in question, as per [[ https://github.com/rutgers-apl/alive-nj | alive-nj ]], for all the type combinations i checked
(input: `i16`, `i32`, `i64`; intermediate: `half`/`i16`, `float`/`i32`, `double`/`i64`)
for the following `icmp` comparisons the `uitofp`+`bitcast`+`icmp` can be evaluated to a boolean:
* `slt 0`
* `sgt -1`
I did not check vectors, but i'm guessing it's the same there.
{F5889242}
Thus all these cases are in the testcase (along with the vector variant with additional `undef` element in the middle).
There are no negative patterns here (unless alive-nj lied/is broken), all of these should be optimized.
Reviewers: spatel, majnemer, efriedma, arsenm
Reviewed By: spatel
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D44421
llvm-svn: 327535
Summary:
This pattern came up in PR36682 / D44390
https://bugs.llvm.org/show_bug.cgi?id=36682https://reviews.llvm.org/D44390https://godbolt.org/g/oKvT5H
Looking at the IR pattern in question, as per [[ https://github.com/rutgers-apl/alive-nj | alive-nj ]], for all the type combinations i checked
(input: `i16`, `i32`, `i64`; intermediate: `half`/`i16`, `float`/`i32`, `double`/`i64`)
for the following `icmp` comparisons the `uitofp`+`bitcast` can be dropped:
* `eq 0`
* `ne 0`
I did not check vectors, but i'm guessing it's the same there.
{F5889189}
Thus all these cases are in the testcase (along with the vector variant with additional `undef` element in the middle).
There are no negative patterns here (unless alive-nj lied/is broken), all of these should be optimized.
Generated with
{F5889196}
Reviewers: spatel, majnemer, efriedma, arsenm
Reviewed By: spatel
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D44416
llvm-svn: 327534
I had to modify the bswap recognition to allow unshrunk masks to make this work.
Fixes PR36689.
Differential Revision: https://reviews.llvm.org/D44442
llvm-svn: 327530
