are operations that do not access memory but may be sensitive
to floating-point environment changes. LLVM does not attempt
to model FP environment changes, so this was unnecessarily conservative
and was getting on the way of some optimizations, in particular
SLP vectorization.
llvm-svn: 203037
DWARF discriminators are used to distinguish multiple control flow paths
on the same source location. When this happens, instructions across
basic block boundaries will share the same debug location.
This pass detects this situation and creates a new lexical scope to one
of the two instructions. This lexical scope is a child scope of the
original and contains a new discriminator value. This discriminator is
then picked up from MCObjectStreamer::EmitDwarfLocDirective to be
written on the object file.
This fixes http://llvm.org/bugs/show_bug.cgi?id=18270.
llvm-svn: 202752
and update everything accordingly. This can be used to conditionalize
the amount of output in the backend based on the amount of debug
requested/metadata emission scheme by a front end (e.g. clang).
Paired with a commit to clang.
llvm-svn: 202332
We should apply fastcc whenever profitable. We can expand this list,
but there are lots of conventions with performance implications that we
don't want to change.
Differential Revision: http://llvm-reviews.chandlerc.com/D2705
llvm-svn: 202293
the default.
Based on the patch by Matt Arsenault, D1764!
I switched one place to use the more direct pointer type to compute the
desired address space, and I reworked the memcpy rewriting section to
reflect significant refactorings that this patch helped inspire.
Thanks to several of the folks who helped review and improve the patch
as well.
llvm-svn: 202247
to work independently for the slice side and the other side.
This allows us to only compute the minimum of the two when we actually
rewrite to a memcpy that needs to take the minimum, and preserve higher
alignment for one side or the other when rewriting to loads and stores.
This fix was inspired by seeing the result of some refactoring that
makes addrspace handling better.
llvm-svn: 202242
checking in SROA.
The primary change is to just rely on uge for checking that the offset
is within the allocation size. This removes the explicit checks against
isNegative which were terribly error prone (including the reversed logic
that led to PR18615) and prevented us from supporting stack allocations
larger than half the address space.... Ok, so maybe the latter isn't
*common* but it's a silly restriction to have.
Also, we used to try to support a PHI node which loaded from before the
start of the allocation if any of the loaded bytes were within the
allocation. This doesn't make any sense, we have never really supported
loading or storing *before* the allocation starts. The simplified logic
just doesn't care.
We continue to allow loading past the end of the allocation in part to
support cases where there is a PHI and some loads are larger than others
and the larger ones reach past the end of the allocation. We could solve
this a different and more conservative way, but I'm still somewhat
paranoid about this.
llvm-svn: 202224
ordering.
The fundamental problem that we're hitting here is that the use-def
chain ordering is *itself* not a stable thing to be relying on in the
rewriting for SROA. Further, we use a non-stable sort over the slices to
arrange them based on the section of the alloca they're operating on.
With a debugging STL implementation (or different implementations in
stage2 and stage3) this can cause stage2 != stage3.
The specific aspect of this problem fixed in this commit deals with the
rewriting and load-speculation around PHIs and Selects. This, like many
other aspects of the use-rewriting in SROA, is really part of the
"strong SSA-formation" that is doen by SROA where it works very hard to
canonicalize loads and stores in *just* the right way to satisfy the
needs of mem2reg[1]. When we have a select (or a PHI) with 2 uses of the
same alloca, we test that loads downstream of the select are
speculatable around it twice. If only one of the operands to the select
needs to be rewritten, then if we get lucky we rewrite that one first
and the select is immediately speculatable. This can cause the order of
operand visitation, and thus the order of slices to be rewritten, to
change an alloca from promotable to non-promotable and vice versa.
The fix is to defer all of the speculation until *after* the rewrite
phase is done. Once we've rewritten everything, we can accurately test
for whether speculation will work (once, instead of twice!) and the
order ceases to matter.
This also happens to simplify the other subtlety of speculation -- we
need to *not* speculate anything unless the result of speculating will
make the alloca fully promotable by mem2reg. I had a previous attempt at
simplifying this, but it was still pretty horrible.
There is actually already a *really* nice test case for this in
basictest.ll, but on multiple STL implementations and inputs, we just
got "lucky". Fortunately, the test case is very small and we can
essentially build it in exactly the opposite way to get reasonable
coverage in both directions even from normal STL implementations.
llvm-svn: 202092
On x86, shifting a vector by a scalar is significantly cheaper than shifting a
vector by another fully general vector. Unfortunately, because SelectionDAG
operates on just one basic block at a time, the shufflevector instruction that
reveals whether the right-hand side of a shift *is* really a scalar is often
not visible to CodeGen when it's needed.
This adds another handler to CodeGenPrepare, to sink any useful shufflevector
instructions down to the basic block where they're used, predicated on a target
hook (since on other architectures, doing so will often just introduce extra
real work).
rdar://problem/16063505
llvm-svn: 201655
During LSR of one loop we can run into a situation where we have to expand the
start of a recurrence of a loop induction variable in this loop. This start
value is a value derived of the induction variable of a preceeding loop. SCEV
has cannonicalized this value to a different recurrence than the recurrence of
the preceeding loop's induction variable (the type and/or step direction) has
changed). When we come to instantiate this SCEV we created a second induction
variable in this preceeding loop. This patch tries to base such derived
induction variables of the preceeding loop's induction variable.
This helps twolf on arm and seems to help scimark2 on x86.
Reapply with a fix for the case of a value derived from a pointer.
radar://15970709
llvm-svn: 201496
During LSR of one loop we can run into a situation where we have to expand the
start of a recurrence of a loop induction variable in this loop. This start
value is a value derived of the induction variable of a preceeding loop. SCEV
has cannonicalized this value to a different recurrence than the recurrence of
the preceeding loop's induction variable (the type and/or step direction) has
changed). When we come to instantiate this SCEV we created a second induction
variable in this preceeding loop. This patch tries to base such derived
induction variables of the preceeding loop's induction variable.
This helps twolf on arm and seems to help scimark2 on x86.
radar://15970709
llvm-svn: 201465
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for
targets with mature MC support. Such targets will always parse the inline
assembly (even when emitting assembly). Targets without mature MC support
continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced
with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler
to parse inline assembly (even when emitting assembly output). UseIntegratedAs
is set to true for targets that consider any failure to parse valid assembly
to be a bug. Target specific subclasses generally enable the integrated
assembler in their constructor. The default value can be overridden with
-no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example,
those that use mnemonics such as 'foo' or 'hello world') have been updated to
disable the integrated assembler.
Changes since review (and last commit attempt):
- Fixed test failures that were missed due to configuration of local build.
(fixes crash.ll and a couple others).
- Fixed tests that happened to pass because the local build was on X86
(should fix 2007-12-17-InvokeAsm.ll)
- mature-mc-support.ll's should no longer require all targets to be compiled.
(should fix ARM and PPC buildbots)
- Object output (-filetype=obj and similar) now forces the integrated assembler
to be enabled regardless of default setting or -no-integrated-as.
(should fix SystemZ buildbots)
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201333
As defined in LangRef, aliases do not have sections. However, LLVM's
GlobalAlias class inherits from GlobalValue, which means we can read and
set its section. We should probably ban that as a separate change,
since it doesn't make much sense for an alias to have a section that
differs from its aliasee.
Fixes PR18757, where the section was being lost on the global in code
from Clang like:
extern "C" {
__attribute__((used, section("CUSTOM"))) static int in_custom_section;
}
Reviewers: rafael.espindola
Differential Revision: http://llvm-reviews.chandlerc.com/D2758
llvm-svn: 201286
logical operations on the i1's driving them. This is a bad idea for every
target I can think of (confirmed with micro tests on all of: x86-64, ARM,
AArch64, Mips, and PowerPC) because it forces the i1 to be materialized into
a general purpose register, whereas consuming it directly into a select generally
allows it to exist only transiently in a predicate or flags register.
Chandler ran a set of performance tests with this change, and reported no
measurable change on x86-64.
llvm-svn: 201275
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for targets with mature MC support. Such targets will always parse the inline assembly (even when emitting assembly). Targets without mature MC support continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler to parse inline assembly (even when emitting assembly output). UseIntegratedAs is set to true for targets that consider any failure to parse valid assembly to be a bug. Target specific subclasses generally enable the integrated assembler in their constructor. The default value can be overridden with -no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example, those that use mnemonics such as 'foo' or 'hello world') have been updated to disable the integrated assembler.
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201237
Fixes PR18753 and PR18782.
This is necessary for LICM to preserve LCSSA correctly and efficiently.
There is still some active discussion about whether we should be using
LCSSA, but we can't just immediately stop using it and we *need* LICM to
preserve it while we are using it. We can restore the old SSAUpdater
driven code if and when there is a serious effort to remove the reliance
on LCSSA from all of the loop passes.
However, this also serves as a great example of why LCSSA is very nice
to have. This change significantly simplifies the process of sinking
instructions for LICM, and makes it quite a bit less expensive.
It wouldn't even be as complex as it is except that I had to start the
process of removing the big recursive LCSSA formation hammer in order to
switch even this much of the re-forming code to asserting that LCSSA was
preserved. I'll fully remove that next just to tidy things up until the
LCSSA debate settles one way or the other.
llvm-svn: 201148
Before conditional store vectorization/unrolling we had only one
vectorized/unrolled basic block. After adding support for conditional store
vectorization this will not only be one block but multiple basic blocks. The
last block would have the back-edge. I updated the code to use a vector of basic
blocks instead of a single basic block and fixed the users to use the last entry
in this vector. But, I forgot to add the basic blocks to this vector!
Fixes PR18724.
llvm-svn: 201028
The bitcast instruction during constant materialization was not placed correcly
in the presence of phi nodes. This commit fixes the insertion point to be in the
idom instead.
This fixes PR18768
llvm-svn: 201009
225 is the default value of inline-threshold. This change will make sure
we have the same inlining behavior as prior to r200886.
As Chandler points out, even though we don't have code in our testing
suite that uses cold attribute, there are larger applications that do
use cold attribute.
r200886 + this commit intend to keep the same behavior as prior to r200886.
We can later on tune the inlinecold-threshold.
The main purpose of r200886 is to help performance of instrumentation based
PGO before we actually hook up inliner with analysis passes such as BPI and BFI.
For instrumentation based PGO, we try to increase inlining of hot functions and
reduce inlining of cold functions by setting inlinecold-threshold.
Another option suggested by Chandler is to use a boolean flag that controls
if we should use OptSizeThreshold for cold functions. The default value
of the boolean flag should not change the current behavior. But it gives us
less freedom in controlling inlining of cold functions.
llvm-svn: 200898
Added command line option inlinecold-threshold to set threshold for inlining
functions with cold attribute. Listen to the cold attribute when it would
decrease the inline threshold.
llvm-svn: 200886
Add the missing transformation strchr(p, 0) -> p + strlen(p) to SimplifyLibCalls
and remove the ToDo comment.
Reviewer: Duncan P.N. Exan Smith
llvm-svn: 200736
It disturbs the layout of the parameters in memory and registers,
leading to problems in the backend.
The plan for optimizing internal inalloca functions going forward is to
essentially SROA the argument memory and demote any captured arguments
(things that aren't trivially written by a load or store) to an indirect
pointer to a static alloca.
llvm-svn: 200717
LowerExpectIntrinsic previously only understood the idiom of an expect
intrinsic followed by a comparison with zero. For llvm.expect.i1, the
comparison would be stripped by the early-cse pass.
Patch by Daniel Micay.
llvm-svn: 200664
unrolling heuristic per default
Benchmarking on x86_64 (thanks Chandler!) and ARM has shown those options speed
up some benchmarks while not causing any interesting regressions.
llvm-svn: 200621
LCSSA when we promote to SSA registers inside of LICM.
Currently, this is actually necessary. The promotion logic in LICM uses
SSAUpdater which doesn't understand how to place LCSSA PHI nodes.
Teaching it to do so would be a very significant undertaking. It may be
worthwhile and I've left a FIXME about this in the code as well as
starting a thread on llvmdev to try to figure out the right long-term
solution.
For now, the PR needs to be fixed. Short of using the promition
SSAUpdater to place both the LCSSA PHI nodes and the promoted PHI nodes,
I don't see a cleaner or cheaper way of achieving this. Fortunately,
LCSSA is relatively lazy and sparse -- it should only update
instructions which need it. We can also skip the recursive variant when
we don't promote to SSA values.
llvm-svn: 200612
cost so that they don't impact the vector bonus. Fundamentally, counting
unsimplified instructions is just *wrong*; it will continue to introduce
instability as things which do not generate code bizarrely impact
inlining. For example, sufficiently nested inlined functions could turn
off the vector bonus with lifetime markers just like the debug
intrinsics do. =/
This is a short-term tactical fix. Long term, I think we need to remove
the vector bonus entirely. That's a separate patch and discussion
though.
The patch to fix this provided by Dario Domizioli. I've added some
comments about the planned direction and used a heavily pruned form of
debug info intrinsics for the test case. While this debug info doesn't
work or "do" anything useful, it lets us easily test all manner of
interference easily, and I suspect this will not be the last time we
want to craft a pattern where debug info interferes with the inliner in
a problematic way.
llvm-svn: 200609
This reverts commit r200576. It broke 32-bit self-host builds by
vectorizing two calls to @llvm.bswap.i64, which we then fail to expand.
llvm-svn: 200602
transform accordingly. Based on similar code from Loop vectorization.
Subsequent commits will include vectorization of function calls to
vector intrinsics and form function calls to vector library calls.
Patch by Raul Silvera! (Much delayed due to my not running dcommit)
llvm-svn: 200576
loop vectorizer to not do so when runtime pointer checks are needed and
share code with the new (not yet enabled) load/store saturation runtime
unrolling. Also ensure that we only consider the runtime checks when the
loop hasn't already been vectorized. If it has, the runtime check cost
has already been paid.
I've fleshed out a test case to cover the scalar unrolling as well as
the vector unrolling and comment clearly why we are or aren't following
the pattern.
llvm-svn: 200530
preserve loop simplify of enclosing loops.
The problem here starts with LoopRotation which ends up cloning code out
of the latch into the new preheader it is buidling. This can create
a new edge from the preheader into the exit block of the loop which
breaks LoopSimplify form. The code tries to fix this by splitting the
critical edge between the latch and the exit block to get a new exit
block that only the latch dominates. This sadly isn't sufficient.
The exit block may be an exit block for multiple nested loops. When we
clone an edge from the latch of the inner loop to the new preheader
being built in the outer loop, we create an exiting edge from the outer
loop to this exit block. Despite breaking the LoopSimplify form for the
inner loop, this is fine for the outer loop. However, when we split the
edge from the inner loop to the exit block, we create a new block which
is in neither the inner nor outer loop as the new exit block. This is
a predecessor to the old exit block, and so the split itself takes the
outer loop out of LoopSimplify form. We need to split every edge
entering the exit block from inside a loop nested more deeply than the
exit block in order to preserve all of the loop simplify constraints.
Once we try to do that, a problem with splitting critical edges
surfaces. Previously, we tried a very brute force to update LoopSimplify
form by re-computing it for all exit blocks. We don't need to do this,
and doing this much will sometimes but not always overlap with the
LoopRotate bug fix. Instead, the code needs to specifically handle the
cases which can start to violate LoopSimplify -- they aren't that
common. We need to see if the destination of the split edge was a loop
exit block in simplified form for the loop of the source of the edge.
For this to be true, all the predecessors need to be in the exact same
loop as the source of the edge being split. If the dest block was
originally in this form, we have to split all of the deges back into
this loop to recover it. The old mechanism of doing this was
conservatively correct because at least *one* of the exiting blocks it
rewrote was the DestBB and so the DestBB's predecessors were fixed. But
this is a much more targeted way of doing it. Making it targeted is
important, because ballooning the set of edges touched prevents
LoopRotate from being able to split edges *it* needs to split to
preserve loop simplify in a coherent way -- the critical edge splitting
would sometimes find the other edges in need of splitting but not
others.
Many, *many* thanks for help from Nick reducing these test cases
mightily. And helping lots with the analysis here as this one was quite
tricky to track down.
llvm-svn: 200393
because of the inside-out run of LoopSimplify in the LoopPassManager and
the fact that LoopSimplify couldn't be "preserved" across two
independent LoopPassManagers.
Anyways, in that case, IndVars wasn't correctly preserving an LCSSA PHI
node because it thought it was rewriting (via SCEV) the incoming value
to a loop invariant value. While it may well be invariant for the
current loop, it may be rewritten in terms of an enclosing loop's
values. This in and of itself is fine, as the LCSSA PHI node in the
enclosing loop for the inner loop value we're rewriting will have its
own LCSSA PHI node if used outside of the enclosing loop. With me so
far?
Well, the current loop and the enclosing loop may share an exiting
block and exit block, and when they do they also share LCSSA PHI nodes.
In this case, its not valid to RAUW through the LCSSA PHI node.
Expected crazy test included.
llvm-svn: 200372
When simplifycfg moves an instruction, it must drop metadata it doesn't know
is still valid with the preconditions changes. In particular, it must drop
the range and tbaa metadata.
The patch implements this with an utility function to drop all metadata not
in a white list.
llvm-svn: 200322
vectorizer, placing it behind an off-by-default flag.
It turns out that block frequency isn't what we want at all, here or
elsewhere. This has been I think a nagging feeling for several of us
working with it, but Arnold has given some really nice simple examples
where the results are so comprehensively wrong that they aren't useful.
I'm planning to email the dev list with a summary of why its not really
useful and a couple of ideas about how to better structure these types
of heuristics.
llvm-svn: 200294
Summary:
I searched Transforms/ and Analysis/ for 'ByVal' and updated those call
sites to check for inalloca if appropriate.
I added tests for any change that would allow an optimization to fire on
inalloca.
Reviewers: nlewycky
Differential Revision: http://llvm-reviews.chandlerc.com/D2449
llvm-svn: 200281
The vectorizer takes a loop like this and widens all instructions except for the
store. The stores are scalarized/unrolled and hidden behind an "if" block.
for (i = 0; i < 128; ++i) {
if (a[i] < 10)
a[i] += val;
}
for (i = 0; i < 128; i+=2) {
v = a[i:i+1];
v0 = (extract v, 0) + 10;
v1 = (extract v, 1) + 10;
if (v0 < 10)
a[i] = v0;
if (v1 < 10)
a[i] = v1;
}
The vectorizer relies on subsequent optimizations to sink instructions into the
conditional block where they are anticipated.
The flag "vectorize-num-stores-pred" controls whether and how many stores to
handle this way. Vectorization of conditional stores is disabled per default for
now.
This patch also adds a change to the heuristic when the flag
"enable-loadstore-runtime-unroll" is enabled (off by default). It unrolls small
loops until load/store ports are saturated. This heuristic uses TTI's
getMaxUnrollFactor as a measure for load/store ports.
I also added a second flag -enable-cond-stores-vec. It will enable vectorization
of conditional stores. But there is no cost model for vectorization of
conditional stores in place yet so this will not do good at the moment.
rdar://15892953
Results for x86-64 -O3 -mavx +/- -mllvm -enable-loadstore-runtime-unroll
-vectorize-num-stores-pred=1 (before the BFI change):
Performance Regressions:
Benchmarks/Ptrdist/yacr2/yacr2 7.35% (maze3() is identical but 10% slower)
Applications/siod/siod 2.18%
Performance improvements:
mesa -4.42%
libquantum -4.15%
With a patch that slightly changes the register heuristics (by subtracting the
induction variable on both sides of the register pressure equation, as the
induction variable is probably not really unrolled):
Performance Regressions:
Benchmarks/Ptrdist/yacr2/yacr2 7.73%
Applications/siod/siod 1.97%
Performance Improvements:
libquantum -13.05% (we now also unroll quantum_toffoli)
mesa -4.27%
llvm-svn: 200270
uint32.
When folding branches to common destination, the updated branch weights
can exceed uint32 by more than factor of 2. We should keep halving the
weights until they can fit into uint32.
llvm-svn: 200262
cold loops as-if they were being optimized for size.
Nothing fancy here. Simply test case included. The nice thing is that we
can now incrementally build on top of this to drive other heuristics.
All of the infrastructure work is done to get the profile information
into this layer.
The remaining work necessary to make this a fully general purpose loop
unroller for very hot loops is to make it a fully general purpose loop
unroller. Things I know of but am not going to have time to benchmark
and fix in the immediate future:
1) Don't disable the entire pass when the target is lacking vector
registers. This really doesn't make any sense any more.
2) Teach the unroller at least and the vectorizer potentially to handle
non-if-converted loops. This is trivial for the unroller but hard for
the vectorizer.
3) Compute the relative hotness of the loop and thread that down to the
various places that make cost tradeoffs (very likely only the
unroller makes sense here, and then only when dealing with loops that
are small enough for unrolling to not completely blow out the LSD).
I'm still dubious how useful hotness information will be. So far, my
experiments show that if we can get the correct logic for determining
when unrolling actually helps performance, the code size impact is
completely unimportant and we can unroll in all cases. But at least
we'll no longer burn code size on cold code.
One somewhat unrelated idea that I've had forever but not had time to
implement: mark all functions which are only reachable via the global
constructors rigging in the module as optsize. This would also decrease
the impact of any more aggressive heuristics here on code size.
llvm-svn: 200219
powers of two. This is essentially always the correct thing given the
impact on alignment, scaling factors that can be used in addressing
modes, etc. Also, fix the management of the unroll vs. small loop cost
to more accurately model things with this world.
Enhance a test case to actually exercise more of the unroll machinery if
using synthetic constants rather than a specific target model. Before
this change, with the added flags this test will unroll 3 times instead
of either 2 or 4 (the two sensible answers).
While I don't expect this to make a huge difference, if there are lots
of loops sitting right on the edge of hitting the 'small unroll' factor,
they might change behavior. However, I've benchmarked moving the small
loop cost up and down in many various ways and by a huge factor (2x)
without seeing more than 0.2% code size growth. Small adjustments such
as the series that led up here have led to about 1% improvement on some
benchmarks, but it is very close to the noise floor so I mostly checked
that nothing regressed. Let me know if you see bad behavior on other
targets but I don't expect this to be a sufficiently dramatic change to
trigger anything.
llvm-svn: 200213
the loops in a function, and teach LICM to work in the presance of
LCSSA.
Previously, LCSSA was a loop pass. That made passes requiring it also be
loop passes and unable to depend on function analysis passes easily. It
also caused outer loops to have a different "canonical" form from inner
loops during analysis. Instead, we go into LCSSA form and preserve it
through the loop pass manager run.
Note that this has the same problem as LoopSimplify that prevents
enabling its verification -- loop passes which run at the end of the loop
pass manager and don't preserve these are valid, but the subsequent loop
pass runs of outer loops that do preserve this pass trigger too much
verification and fail because the inner loop no longer verifies.
The other problem this exposed is that LICM was completely unable to
handle LCSSA form. It didn't preserve it and it actually would give up
on moving instructions in many cases when they were used by an LCSSA phi
node. I've taught LICM to support detecting LCSSA-form PHI nodes and to
hoist and sink around them. This may actually let LICM fire
significantly more because we put everything into LCSSA form to rotate
the loop before running LICM. =/ Now LICM should handle that fine and
preserve it correctly. The down side is that LICM has to require LCSSA
in order to preserve it. This is just a fact of life for LCSSA. It's
entirely possible we should completely remove LCSSA from the optimizer.
The test updates are essentially accomodating LCSSA phi nodes in the
output of LICM, and the fact that we now completely sink every
instruction in ashr-crash below the loop bodies prior to unrolling.
With this change, LCSSA is computed only three times in the pass
pipeline. One of them could be removed (and potentially a SCEV run and
a separate LoopPassManager entirely!) if we had a LoopPass variant of
InstCombine that ran InstCombine on the loop body but refused to combine
away LCSSA PHI nodes. Currently, this also prevents loop unrolling from
being in the same loop pass manager is rotate, LICM, and unswitch.
There is one thing that I *really* don't like -- preserving LCSSA in
LICM is quite expensive. We end up having to re-run LCSSA twice for some
loops after LICM runs because LICM can undo LCSSA both in the current
loop and the parent loop. I don't really see good solutions to this
other than to completely move away from LCSSA and using tools like
SSAUpdater instead.
llvm-svn: 200067
Argument promotion can replace an argument of a call with an alloca. This
requires clearing the tail marker as it is very likely that the callee is now
using an alloca in the caller.
This fixes pr14710.
llvm-svn: 199909
function and a FunctionPass.
This has many benefits. The motivating use case was to be able to
compute function analysis passes *after* running LoopSimplify (to avoid
invalidating them) and then to run other passes which require
LoopSimplify. Specifically passes like unrolling and vectorization are
critical to wire up to BranchProbabilityInfo and BlockFrequencyInfo so
that they can be profile aware. For the LoopVectorize pass the only
things in the way are LoopSimplify and LCSSA. This fixes LoopSimplify
and LCSSA is next on my list.
There are also a bunch of other benefits of doing this:
- It is now very feasible to make more passes *preserve* LoopSimplify
because they can simply run it after changing a loop. Because
subsequence passes can assume LoopSimplify is preserved we can reduce
the runs of this pass to the times when we actually mutate a loop
structure.
- The new pass manager should be able to more easily support loop passes
factored in this way.
- We can at long, long last observe that LoopSimplify is preserved
across SCEV. This *halves* the number of times we run LoopSimplify!!!
Now, getting here wasn't trivial. First off, the interfaces used by
LoopSimplify are all over the map regarding how analysis are updated. We
end up with weird "pass" parameters as a consequence. I'll try to clean
at least some of this up later -- I'll have to have it all clean for the
new pass manager.
Next up I discovered a really frustrating bug. LoopUnroll *claims* to
preserve LoopSimplify. That's actually a lie. But the way the
LoopPassManager ends up running the passes, it always ran LoopSimplify
on the unrolled-into loop, rectifying this oversight before any
verification could kick in and point out that in fact nothing was
preserved. So I've added code to the unroller to *actually* simplify the
surrounding loop when it succeeds at unrolling.
The only functional change in the test suite is that we now catch a case
that was previously missed because SCEV and other loop transforms see
their containing loops as simplified and thus don't miss some
opportunities. One test case has been converted to check that we catch
this case rather than checking that we miss it but at least don't get
the wrong answer.
Note that I have #if-ed out all of the verification logic in
LoopSimplify! This is a temporary workaround while extracting these bits
from the LoopPassManager. Currently, there is no way to have a pass in
the LoopPassManager which preserves LoopSimplify along with one which
does not. The LPM will try to verify on each loop in the nest that
LoopSimplify holds but the now-Function-pass cannot distinguish what
loop is being verified and so must try to verify all of them. The inner
most loop is clearly no longer simplified as there is a pass which
didn't even *attempt* to preserve it. =/ Once I get LCSSA out (and maybe
LoopVectorize and some other fixes) I'll be able to re-enable this check
and catch any places where we are still failing to preserve
LoopSimplify. If this causes problems I can back this out and try to
commit *all* of this at once, but so far this seems to work and allow
much more incremental progress.
llvm-svn: 199884
This logic hadn't been updated to handle FastMathFlags, and it took me a while to detect it because it doesn't show up in a simple search for CreateFAdd.
llvm-svn: 199629
intrinsics.
Reported on the list by Evan with a couple of attempts to fix, but it
took a while to dig down to the root cause. There are two overlapping
bugs here, both centering around the circumstance of discovering
a memcpy operand which is known to be completely outside the bounds of
the alloca.
First, we need to kill the *other* side of the memcpy if it was added to
this alloca. Otherwise we'll factor it into our slicing and try to
rewrite it even though we know for a fact that it is dead. This is made
more tricky because we can visit the sides in either order. So we have
to both kill the other side and skip instructions marked as dead. The
latter really should be goodness in every case, but here is a matter of
correctness.
Second, we need to actually remove the *uses* of the alloca by the
memcpy when queuing it for later deletion. Otherwise it may still be
using the alloca when we go to promote it (if the rewrite re-uses the
existing alloca instruction). Do this by factoring out the
use-clobbering used when for nixing a Phi argument and re-using it
across the operands of a to-be-deleted instruction.
llvm-svn: 199590
a reduction.
Really. Under certain circumstances (the use list of an instruction has to be
set up right - hence the extra pass in the test case) we would not recognize
when a value in a potential reduction cycle was used multiple times by the
reduction cycle.
Fixes PR18526.
radar://15851149
llvm-svn: 199570
There has been an old FIXME to find the right cut-off for when it's worth
analyzing and potentially transforming a switch to a lookup table.
The switches always have two or more cases. I could not measure any speed-up
by transforming a switch with two cases. A switch with three cases gets a nice
speed-up, and I couldn't measure any compile-time regression, so I think this
is the right threshold.
In a Clang self-host, this causes 480 new switches to be transformed,
and reduces the final binary size with 8 KB.
llvm-svn: 199294
case when the lookup table doesn't have any holes.
This means we can build a lookup table for switches like this:
switch (x) {
case 0: return 1;
case 1: return 2;
case 2: return 3;
case 3: return 4;
default: exit(1);
}
The default case doesn't yield a constant result here, but that doesn't matter,
since a default result is only necessary for filling holes in the lookup table,
and this table doesn't have any holes.
This makes us transform 505 more switches in a clang bootstrap, and shaves 164 KB
off the resulting clang binary.
llvm-svn: 199025
1- Use the line_iterator class to read profile files.
2- Allow comments in profile file. Lines starting with '#'
are completely ignored while reading the profile.
3- Add parsing support for discriminators and indirect call samples.
Our external profiler can emit more profile information that we are
currently not handling. This patch does not add new functionality to
support this information, but it allows profile files to provide it.
I will add actual support later on (for at least one of these
features, I need support for DWARF discriminators in Clang).
A sample line may contain the following additional information:
Discriminator. This is used if the sampled program was compiled with
DWARF discriminator support
(http://wiki.dwarfstd.org/index.php?title=Path_Discriminators). This
is currently only emitted by GCC and we just ignore it.
Potential call targets and samples. If present, this line contains a
call instruction. This models both direct and indirect calls. Each
called target is listed together with the number of samples. For
example,
130: 7 foo:3 bar:2 baz:7
The above means that at relative line offset 130 there is a call
instruction that calls one of foo(), bar() and baz(). With baz()
being the relatively more frequent call target.
Differential Revision: http://llvm-reviews.chandlerc.com/D2355
4- Simplify format of profile input file.
This implements earlier suggestions to simplify the format of the
sample profile file. The symbol table is not necessary and function
profiles do not need to know the number of samples in advance.
Differential Revision: http://llvm-reviews.chandlerc.com/D2419
llvm-svn: 198973
This adds a propagation heuristic to convert instruction samples
into branch weights. It implements a similar heuristic to the one
implemented by Dehao Chen on GCC.
The propagation proceeds in 3 phases:
1- Assignment of block weights. All the basic blocks in the function
are initial assigned the same weight as their most frequently
executed instruction.
2- Creation of equivalence classes. Since samples may be missing from
blocks, we can fill in the gaps by setting the weights of all the
blocks in the same equivalence class to the same weight. To compute
the concept of equivalence, we use dominance and loop information.
Two blocks B1 and B2 are in the same equivalence class if B1
dominates B2, B2 post-dominates B1 and both are in the same loop.
3- Propagation of block weights into edges. This uses a simple
propagation heuristic. The following rules are applied to every
block B in the CFG:
- If B has a single predecessor/successor, then the weight
of that edge is the weight of the block.
- If all the edges are known except one, and the weight of the
block is already known, the weight of the unknown edge will
be the weight of the block minus the sum of all the known
edges. If the sum of all the known edges is larger than B's weight,
we set the unknown edge weight to zero.
- If there is a self-referential edge, and the weight of the block is
known, the weight for that edge is set to the weight of the block
minus the weight of the other incoming edges to that block (if
known).
Since this propagation is not guaranteed to finalize for every CFG, we
only allow it to proceed for a limited number of iterations (controlled
by -sample-profile-max-propagate-iterations). It currently uses the same
GCC default of 100.
Before propagation starts, the pass builds (for each block) a list of
unique predecessors and successors. This is necessary to handle
identical edges in multiway branches. Since we visit all blocks and all
edges of the CFG, it is cleaner to build these lists once at the start
of the pass.
Finally, the patch fixes the computation of relative line locations.
The profiler emits lines relative to the function header. To discover
it, we traverse the compilation unit looking for the subprogram
corresponding to the function. The line number of that subprogram is the
line where the function begins. That becomes line zero for all the
relative locations.
llvm-svn: 198972
for (i = 0; i < N; ++i)
A[i * Stride1] += B[i * Stride2];
We take loops like this and check that the symbolic strides 'Strided1/2' are one
and drop to the scalar loop if they are not.
This is currently disabled by default and hidden behind the flag
'enable-mem-access-versioning'.
radar://13075509
llvm-svn: 198950
This doesn't seem to have actually broken anything. It was paranoia
on my part. Trying again now that bots are more stable.
This is a follow up of the r198338 commit that added truncates for
lcssa phi nodes. Sinking the truncates below the phis cleans up the
loop and simplifies subsequent analysis within the indvars pass.
llvm-svn: 198678
This is a follow up of the r198338 commit that added truncates for
lcssa phi nodes. Sinking the truncates below the phis cleans up the
loop and simplifies subsequent analysis within the indvars pass.
llvm-svn: 198654
Now with a fix for PR18384: ValueHandleBase::ValueIsDeleted.
We need to invalidate SCEV's loop info when we delete a block, even if no values are hoisted.
llvm-svn: 198631
This commit was the source of crasher PR18384:
While deleting: label %for.cond127
An asserting value handle still pointed to this value!
UNREACHABLE executed at llvm/lib/IR/Value.cpp:671!
Reverting to get the builders green, feel free to re-land after fixing up.
(Renato has a handy isolated repro if you need it.)
This reverts commit r198478.
llvm-svn: 198503
getSCEV for an ashr instruction creates an intermediate zext
expression when it truncates its operand.
The operand is initially inside the loop, so the narrow zext
expression has a non-loop-invariant loop disposition.
LoopSimplify then runs on an outer loop, hoists the ashr operand, and
properly invalidate the SCEVs that are mapped to value.
The SCEV expression for the ashr is now an AddRec with the hoisted
value as the now loop-invariant start value.
The LoopDisposition of this wide value was properly invalidated during
LoopSimplify.
However, if we later get the ashr SCEV again, we again try to create
the intermediate zext expression. We get the same SCEV that we did
earlier, and it is still cached because it was never mapped to a
Value. When we try to create a new AddRec we abort because we're using
the old non-loop-invariant LoopDisposition.
I don't have a solution for this other than to clear LoopDisposition
when LoopSimplify hoists things.
I think the long-term strategy should be to perform LoopSimplify on
all loops before computing SCEV and before running any loop opts on
individual loops. It's possible we may want to rerun LoopSimplify on
individual loops, but it should rarely do anything, so rarely require
invalidating SCEV.
llvm-svn: 198478
The loop rerolling pass was failing with an assertion failure from a
failed cast on loops like this:
void foo(int *A, int *B, int m, int n) {
for (int i = m; i < n; i+=4) {
A[i+0] = B[i+0] * 4;
A[i+1] = B[i+1] * 4;
A[i+2] = B[i+2] * 4;
A[i+3] = B[i+3] * 4;
}
}
The code was casting the SCEV-expanded code for the new
induction variable to a phi-node. When the loop had a non-constant
lower bound, the SCEV expander would end the code expansion with an
add insted of a phi node and the cast would fail.
It looks like the cast to a phi node was only needed to get the
induction variable value coming from the backedge to compute the end
of loop condition. This patch changes the loop reroller to compare
the induction variable to the number of times the backedge is taken
instead of the iteration count of the loop. In other words, we stop
the loop when the current value of the induction variable ==
IterationCount-1. Previously, the comparison was comparing the
induction variable value from the next iteration == IterationCount.
This problem only seems to occur on 32-bit targets. For some reason,
the loop is not rerolled on 64-bit targets.
PR18290
llvm-svn: 198425
cycles
This allows the value equality check to work even if we don't have a dominator
tree. Also add some more comments.
I was worried about compile time impacts and did not implement reachability but
used the dominance check in the initial patch. The trade-off was that the
dominator tree was required.
The llvm utility function isPotentiallyReachable cuts off the recursive search
after 32 visits. Testing did not show any compile time regressions showing my
worries unjustfied.
No compile time or performance regressions at O3 -flto -mavx on test-suite +
externals.
Addresses review comments from r198290.
llvm-svn: 198400
When widening an IV to remove s/zext, we generally try to eliminate
the original narrow IV. However, LCSSA phi nodes outside the loop were
still using the original IV. Clean this up more aggressively to avoid
redundancy in generated code.
llvm-svn: 198338
When there are cycles in the value graph we have to be careful interpreting
"Value*" identity as "value" equivalence. We interpret the value of a phi node
as the value of its operands.
When we check for value equivalence now we make sure that the "Value*" dominates
all cycles (phis).
%0 = phi [%noaliasval, %addr2]
%l = load %ptr
%addr1 = gep @a, 0, %l
%addr2 = gep @a, 0, (%l + 1)
store %ptr ...
Before this patch we would return NoAlias for (%0, %addr1) which is wrong
because the value of the load is from different iterations of the loop.
Tested on x86_64 -mavx at O3 and O3 -flto with no performance or compile time
regressions.
PR18068
radar://15653794
llvm-svn: 198290
widespread glibc bugs.
The glibc implementation of exp10 has a very serious precision bug in
version 2.15 (and older versions). This is still very widely used (the
current Ubuntu LTS for example uses it) and so it isn't reasonable to
make transforms that produce these functions. This fixes many
miscompiles introduced when we started transforming pow(10.0, ...) into
exp10, and it may have fixed other latent miscompiles where exp10
provided sufficient precision but exp10f did not.
This is all really horrible. The primary bug has been fixed for over
a year and glibc 2.18 works correctly for the test cases I have, but it
will be 2017 before the LTS using 2.15 is no longer supported by Ubuntu
(and thus reasonable for folks to be relying on). =[ We're either going
to need to live without these optimizations, or find a way to switch
behavior more dynamically than using simply the fact that the OS is
"Linux".
To make matters worse, there appears to be significant testing and
fixing of numerous other bugs in the exp10 family of functions right now
in glibc. While those haven't been causing problems I've seen in the
wild, it gives me concerns that we may need to wait until an even later
release of glibc before we can reliably transform code into exp10.
llvm-svn: 198093
Split sadd.with.overflow into add + sadd.with.overflow to allow
analysis and optimization. This should ideally be done after
InstCombine, which can perform code motion (eventually indvars should
run after all canonical instcombines). We want ISEL to recombine the
add and the check, at least on x86.
This is currently under an option for reducing live induction
variables: -liv-reduce. The next step is reducing liveness of IVs that
are live out of the overflow check paths. Once the related
optimizations are fully developed, reviewed and tested, I do expect
this to become default.
llvm-svn: 197926
If the Scalarizer scalarized a vector PHI but could not scalarize
all uses of it, it would insert a series of insertelements to reconstruct
the vector PHI value from the scalar ones. The problem was that it would
emit these insertelements immediately after the PHI, even if there were
other PHIs after it.
llvm-svn: 197909
If we happen to eliminate every case in a switch that has branch
weights, we currently try to create metadata for the one remaining
branch, triggering an assert. Instead, we need to check that the
metadata we're trying to create is sensible.
llvm-svn: 197791
A phi node operand or an instruction operand could be a constant expression that
can trap (division). Check that we don't vectorize such cases.
PR16729
radar://15653590
llvm-svn: 197449
through an invoke instruction.
The original patch for this was written by Mark Seaborn, but I've
reworked his test case into the existing returns_twice test case and
implemented the fix by the prior refactoring to actually run the cost
analysis over invoke instructions, and then here fixing our detection of
the returns_twice attribute to work for both calls and invokes. We never
noticed because we never saw an invoke. =[
llvm-svn: 197216
handles terminator instructions.
The inline cost analysis inheritted some pretty rough handling of
terminator insts from the original cost analysis, and then made it much,
much worse by factoring all of the important analyses into a separate
instruction visitor. That instruction visitor never visited the
terminator.
This works fine for things like conditional branches, but for many other
things we simply computed The Wrong Value. First example are
unconditional branches, which should be free but were counted as full
cost. This is most significant for conditional branches where the
condition simplifies and folds during inlining. We paid a 1 instruction
tax on every branch in a straight line specialized path. =[
Oh, we also claimed that the unreachable instruction had cost.
But it gets worse. Let's consider invoke. We never applied the call
penalty. We never accounted for the cost of the arguments. Nope. Worse
still, we didn't handle the *correctness* constraints of not inlining
recursive invokes, or exception throwing returns_twice functions. Oops.
See PR18206. Sadly, PR18206 requires yet another fix, but this
refactoring is at least a huge step in that direction.
llvm-svn: 197215
GlobalOpt's CleanupConstantGlobalUsers function uses a worklist array to manage
constant users to be visited. The pointers in this array need to be weak
handles because when we delete a constant array, we may also be holding a
pointer to one of its elements (or an element of one of its elements if we're
dealing with an array of arrays) in the worklist.
Fixes PR17347.
llvm-svn: 197178
This avoids creating branch weight metadata of length one when we fold
cases into the default of a switch instruction, which was triggering
an assert.
llvm-svn: 196845
Before this change, inlining one "invoke" into an outer "invoke" call
site can lead to the outer landingpad's catch/filter clauses being
copied multiple times into the resulting landingpad. This happens:
* when the inlined function contains multiple "resume" instructions,
because forwardResume() copies the clauses but is called multiple
times;
* when the inlined function contains a "resume" and a "call", because
HandleCallsInBlockInlinedThroughInvoke() copies the clauses but is
redundant with forwardResume().
Fix this by deduplicating the code.
This problem doesn't lead to any incorrect execution; it's only
untidy.
This change will make fixing PR17872 a little easier.
llvm-svn: 196710
The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.
This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.
The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.
Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.
llvm-svn: 196537
We were creating external uses for scalar values in MustGather entries that also
had a ScalarToTreeEntry (they also are present in a vectorized tuple). This
meant we would keep a value 'alive' as a scalar and vectorized causing havoc.
This is not necessary because when we create a MustGather vector we explicitly
create external uses entries for the insertelement instructions of the
MustGather vector elements.
Fixes PR18129.
radar://15582184
llvm-svn: 196508
clang enables vectorization at optimization levels > 1 and size level < 2. opt
should behave similarily.
Loop vectorization and SLP vectorization can be disabled with the flags
-disable-(loop/slp)-vectorization.
llvm-svn: 196294
The profile file parser needed some tests for its parsing actions.
This adds tests for each of the error messages emitted by the parser.
llvm-svn: 196106
In signed arithmetic we could end up with an i64 trip count for an i32 phi.
Because it is signed arithmetic we know that this is only defined if the i32
does not wrap. It is therefore safe to truncate the i64 trip count to a i32
value.
Fixes PR18049.
llvm-svn: 195787
we generate PHI nodes with multiple entries from the same basic block but
with different values. Enabling CSE on ExtractElement instructions make sure
that all of the RAUWed instructions are the same.
llvm-svn: 195773
Short description.
This issue is about case of treating pointers as integers.
We treat pointers as different if they references different address space.
At the same time, we treat pointers equal to integers (with machine address
width). It was a point of false-positive. Consider next case on 32bit machine:
void foo0(i32 addrespace(1)* %p)
void foo1(i32 addrespace(2)* %p)
void foo2(i32 %p)
foo0 != foo1, while
foo1 == foo2 and foo0 == foo2.
As you can see it breaks transitivity. That means that result depends on order
of how functions are presented in module. Next order causes merging of foo0
and foo1: foo2, foo0, foo1
First foo0 will be merged with foo2, foo0 will be erased. Second foo1 will be
merged with foo2.
Depending on order, things could be merged we don't expect to.
The fix:
Forbid to treat any pointer as integer, except for those, who belong to address space 0.
llvm-svn: 195769
