This fixes a regression introduced by a very old commit 280ac1fd1dc35 (was
llvm-svn 361950).
Commit 280ac1fd1dc35 redesigned the logic in the LSUnit with the goal of
speeding up isReady() queries, and stabilising the LSUnit API (while also making
the load store unit more customisable).
The concept of MemoryGroup (effectively an alias set) was added by that commit
to better describe and track dependencies between memory operations. However,
that concept was not just used for alias dependencies, but it was also used for
describing memory "order" dependencies (enforced by the memory consistency
model).
Instructions of a same memory group were considered "equivalent" as in:
independent operations that can potentially execute in parallel. The problem
was that the cost of a dependency (in terms of number of cycles) should have
been different for "order" dependency. Instructions in an order dependency
simply have to have to wait until their predecessors are "issued" to an
underlying pipeline (rather than having to wait until predecessors have beeng
fully executed). For simple "order" dependencies, this was effectively
introducing an artificial delay on the "issue" of independent loads and stores.
This patch fixes the issue and adds a new test named 'independent-load-stores.s'
to a bunch of x86 targets. That test contains the reproducible posted by Fabian
Ritter on PR45793.
I had to rerun the update-mca-tests script on several files. To avoid expected
regressions on some Exynos tests, I have added a -noalias=false flag (to match
the old strict behavior on latencies).
Some tests for processor Barcelona are improved/fixed by this change and they
now show better results. In a few tests we were incorrectly counting the time
spent by instructions in a scheduler queue. In one case in particular we now
correctly see a store executed out of order. That test was affected by the same
underlying issue reported as PR45793.
Reviewers: mattd
Differential Revision: https://reviews.llvm.org/D79351
This removes some includes/forward-declarations that don't seem to be necessary in the MCA core headers
Based off a cppclean report
Differential Revision: https://reviews.llvm.org/D77073
Before this patch, loads and stores were only tracked by their corresponding
queues in the LSUnit from dispatch until execute stage. In practice we should be
more conservative and assume that memory opcodes leave their queues at
retirement stage.
Basically, loads should leave the load queue only when they have completed and
delivered their data. We conservatively assume that a load is completed when it
is retired. Stores should be tracked by the store queue from dispatch until
retirement. In practice, stores can only leave the store queue if their data can
be written to the data cache.
This is mostly a mechanical change. With this patch, the retire stage notifies
the LSUnit when a memory instruction is retired. That would triggers the release
of LDQ/STQ entries. The only visible change is in memory tests for the bdver2
model. That is because bdver2 is the only model that defines the load/store
queue size.
This patch partially addresses PR39830.
Differential Revision: https://reviews.llvm.org/D68266
llvm-svn: 374034
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
This patch teaches the RCU how to peek 'next' RCUTokens. A new method has been
added to the RetireControlUnit class with the goal of minimizing the complexity
of follow-up patches that will enable macro-fusion support in mca.
This patch also adds method Instruction::getNumMicroOpcodes() to simplify common
interactions with the instruction descriptor (a pattern quite common in some
pipeline stages).
Added the ability to override the default set of consumed scheduler resources
(this -again- is to simplify future patches that add support for macro-op fusion).
No functional change intended.
llvm-svn: 369010
This patch slightly changes the API in the attempt to simplify resource buffer
queries. It is done in preparation for a patch that will enable support for
macro fusion.
llvm-svn: 368994
MSVC (19.16) wants to see the definition of Instruction in
`std::pair<unsigned, const Instruction &> SourceRef` to decide
if it is assignable.
Patch by Orivej Desh.
Differential Revision: https://reviews.llvm.org/D65844
llvm-svn: 368436
Flag -show-encoding enables the printing of instruction encodings as part of the
the instruction info view.
Example (with flags -mtriple=x86_64-- -mcpu=btver2):
Instruction Info:
[1]: #uOps
[2]: Latency
[3]: RThroughput
[4]: MayLoad
[5]: MayStore
[6]: HasSideEffects (U)
[7]: Encoding Size
[1] [2] [3] [4] [5] [6] [7] Encodings: Instructions:
1 2 1.00 4 c5 f0 59 d0 vmulps %xmm0, %xmm1, %xmm2
1 4 1.00 4 c5 eb 7c da vhaddps %xmm2, %xmm2, %xmm3
1 4 1.00 4 c5 e3 7c e3 vhaddps %xmm3, %xmm3, %xmm4
In this example, column Encoding Size is the size in bytes of the instruction
encoding. Column Encodings reports the actual instruction encodings as byte
sequences in hex (objdump style).
The computation of encodings is done by a utility class named mca::CodeEmitter.
In future, I plan to expose the CodeEmitter to the instruction builder, so that
information about instruction encoding sizes can be used by the simulator. That
would be a first step towards simulating the throughput from the decoders in the
hardware frontend.
Differential Revision: https://reviews.llvm.org/D65948
llvm-svn: 368432
This patch slightly refactors data structures internally used by the bottleneck
analysis to track data and resource dependencies.
This patch also updates methods used to print out information about dependency
edges when in debug mode.
This is the last of a sequence of commits done in preparation for an upcoming
patch that fixes PR37494. No functional change intended.
llvm-svn: 363677
This should be the last bit of refactoring in preparation for a patch that would
finally fix PR37494.
This patch introduces the concept of memory dependency groups (class
MemoryGroup) and "Load/Store Unit token" (LSUToken) to track the status of a
memory operation.
A MemoryGroup is a node of a memory dependency graph. It is used internally to
classify memory operations based on the memory operations they depend on. Let I
and J be two memory operations, we say that I and J equivalent (for the purpose
of mapping instructions to memory dependency groups) if the set of memory
operations they depend depend on is identical.
MemoryGroups are identified by so-called LSUToken (a unique group identifier
assigned by the LSUnit to every group). When an instruction I is dispatched to
the LSUnit, the LSUnit maps I to a group, and then returns a LSUToken.
LSUTokens are used by class Scheduler to track memory dependencies.
This patch simplifies the LSUnit interface and moves most of the implementation
details to its base class (LSUnitBase). There is no user visible change to the
output.
llvm-svn: 361950
CriticalRegDep has been renamed CriticalDependency, and it is now used by class
Instruction to store information about the critical register dependency and the
critical memory dependency. No functional change intendend.
llvm-svn: 361737
This patch adds the methods `getCriticalRegDep()` and `computeCriticalRegDep()` to
class InstructionBase.
The goal is to allow users to obtain information about the critical register
dependency that most affects the latency of an instruction.
These methods are currently unused. However, the long term plan is to use them
in order to allow the computation of a critical-path as part of the bottleneck
analysis. So, this is yet another step towards fixing PR37494.
llvm-svn: 361509
Class LSUnitBase provides a abstract interface for all the concrete LS units in
llvm-mca.
Methods exposed by the public abstract LSUnitBase interface are:
- Status isAvailable(const InstRef&);
- void dispatch(const InstRef &);
- const InstRef &isReady(const InstRef &);
LSUnitBase standardises the API, but not the data structures internally used by
LS units. This allows for more flexibility.
Previously, only method `isReady()` was declared virtual by class LSUnit.
Also, derived classes had to inherit all the internal data members of LSUnit.
No functional change intended.
llvm-svn: 361496
This patch adds an experimental stage named MicroOpQueueStage.
MicroOpQueueStage can be used to simulate a hardware micro-op queue (basically,
a decoupling queue between 'decode' and 'dispatch'). Users can specify a queue
size, as well as a optional MaxIPC (which - in the absence of a "Decoders" stage
- can be used to simulate a different throughput from the decoders).
This stage is added to the default pipeline between the EntryStage and the
DispatchStage only if PipelineOption::MicroOpQueue is different than zero. By
default, llvm-mca sets PipelineOption::MicroOpQueue to the value of hidden flag
-micro-op-queue-size.
Throughput from the decoder can be simulated via another hidden flag named
-decoder-throughput. That flag allows us to quickly experiment with different
frontend throughputs. For targets that declare a loop buffer, flag
-decoder-throughput allows users to do multiple runs, each time simulating a
different throughput from the decoders.
This stage can/will be extended in future. For example, we could add a "buffer
full" event to notify bottlenecks caused by backpressure. flag
-decoder-throughput would probably go away if in future we delegate to another
stage (DecoderStage?) the simulation of a (potentially variable) throughput from
the decoders. For now, flag -decoder-throughput is "good enough" to run some
simple experiments.
Differential Revision: https://reviews.llvm.org/D59928
llvm-svn: 357248
Found by inspection when looking at the debug output of MCA.
This problem was latent, and none of the upstream models were affected by it.
No functional change intended.
llvm-svn: 357000
This patch adds a new flag named -bottleneck-analysis to print out information
about throughput bottlenecks.
MCA knows how to identify and classify dynamic dispatch stalls. However, it
doesn't know how to analyze and highlight kernel bottlenecks. The goal of this
patch is to teach MCA how to correlate increases in backend pressure to backend
stalls (and therefore, the loss of throughput).
From a Scheduler point of view, backend pressure is a function of the scheduler
buffer usage (i.e. how the number of uOps in the scheduler buffers changes over
time). Backend pressure increases (or decreases) when there is a mismatch
between the number of opcodes dispatched, and the number of opcodes issued in
the same cycle. Since buffer resources are limited, continuous increases in
backend pressure would eventually leads to dispatch stalls. So, there is a
strong correlation between dispatch stalls, and how backpressure changed over
time.
This patch teaches how to identify situations where backend pressure increases
due to:
- unavailable pipeline resources.
- data dependencies.
Data dependencies may delay execution of instructions and therefore increase the
time that uOps have to spend in the scheduler buffers. That often translates to
an increase in backend pressure which may eventually lead to a bottleneck.
Contention on pipeline resources may also delay execution of instructions, and
lead to a temporary increase in backend pressure.
Internally, the Scheduler classifies instructions based on whether register /
memory operands are available or not.
An instruction is marked as "ready to execute" only if data dependencies are
fully resolved.
Every cycle, the Scheduler attempts to execute all instructions that are ready
to execute. If an instruction cannot execute because of unavailable pipeline
resources, then the Scheduler internally updates a BusyResourceUnits mask with
the ID of each unavailable resource.
ExecuteStage is responsible for tracking changes in backend pressure. If backend
pressure increases during a cycle because of contention on pipeline resources,
then ExecuteStage sends a "backend pressure" event to the listeners.
That event would contain information about instructions delayed by resource
pressure, as well as the BusyResourceUnits mask.
Note that ExecuteStage also knows how to identify situations where backpressure
increased because of delays introduced by data dependencies.
The SummaryView observes "backend pressure" events and prints out a "bottleneck
report".
Example of bottleneck report:
```
Cycles with backend pressure increase [ 99.89% ]
Throughput Bottlenecks:
Resource Pressure [ 0.00% ]
Data Dependencies: [ 99.89% ]
- Register Dependencies [ 0.00% ]
- Memory Dependencies [ 99.89% ]
```
A bottleneck report is printed out only if increases in backend pressure
eventually caused backend stalls.
About the time complexity:
Time complexity is linear in the number of instructions in the
Scheduler::PendingSet.
The average slowdown tends to be in the range of ~5-6%.
For memory intensive kernels, the slowdown can be significant if flag
-noalias=false is specified. In the worst case scenario I have observed a
slowdown of ~30% when flag -noalias=false was specified.
We can definitely recover part of that slowdown if we optimize class LSUnit (by
doing extra bookkeeping to speedup queries). For now, this new analysis is
disabled by default, and it can be enabled via flag -bottleneck-analysis. Users
of MCA as a library can enable the generation of pressure events through the
constructor of ExecuteStage.
This patch partially addresses https://bugs.llvm.org/show_bug.cgi?id=37494
Differential Revision: https://reviews.llvm.org/D58728
llvm-svn: 355308
Dispatch stall cycles may be associated to multiple dispatch stall events.
Before this patch, each stall cycle was associated with a single stall event.
This patch also improves a couple of code comments, and adds a helper method to
query the Scheduler for dispatch stalls.
llvm-svn: 354877
Every cycle, the Scheduler checks if instructions in the ReadySet can be issued
to the underlying pipelines. If an instruction cannot be issued because one or
more pipeline resources are unavailable, then field
Instruction::CriticalResourceMask is updated with the resource identifier of the
unavailable resources.
If an instruction cannot be promoted from the PendingSet to the ReadySet because
of a memory dependency, then field Instruction::CriticalMemDep is updated with
the identifier of the dependending memory instruction.
Bottleneck information is collected after every cycle for instructions that are
waiting to execute. The idea is to help identify causes of bottlenecks; this
information can be used in future to implement a bottleneck analysis.
llvm-svn: 354490
This patch adds a lookup table to speed up resource queries in the ResourceManager.
This patch also moves helper function 'getResourceStateIndex()' from
ResourceManager.cpp to Support.h, so that we can reuse that logic in the
SummaryView (and potentially other views in llvm-mca).
No functional change intended.
llvm-svn: 354470
This patch introduces a new instruction stage named 'IS_PENDING'.
An instruction transitions from the IS_DISPATCHED to the IS_PENDING stage if
input registers are not available, but their latency is known.
This patch also adds a new set of instructions named 'PendingSet' to class
Scheduler. The idea is that the PendingSet will only contain instructions that
have reached the IS_PENDING stage.
By construction, an instruction in the PendingSet is only dependent on
instructions that have already reached the execution stage. The plan is to use
this knowledge to identify bottlenecks caused by data dependencies (see
PR37494).
Differential Revision: https://reviews.llvm.org/D58066
llvm-svn: 353937
This is a follow up of r353706. When the scheduler fails to issue a ready
instruction to the underlying pipelines, it now updates a mask of 'busy resource
units'. That information will be used in future to obtain the set of
"problematic" resources in the case of bottlenecks caused by resource pressure.
No functional change intended.
llvm-svn: 353728
In case of bottlenecks caused by pipeline pressure, we want to be able to
correctly report the set of problematic pipelines. This is a first step towards
adding support for bottleneck hints in llvm-mca (see PR37494). No functional
change intended.
llvm-svn: 353706
DispatchStage should always delegate to an object of class RegisterFile the task
of updating data dependencies. ReadState and WriteState objects should not be
modified directly by DispatchStage.
This patch also renames stage IS_AVAILABLE to IS_DISPATCHED.
llvm-svn: 353170
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
llvm-svn: 351965
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Field ResourceUnitMask was incorrectly defined as a 'const unsigned' mask. It
should have been a 64 bit quantity instead. That means, ResourceUnitMask was
always implicitly truncated to a 32 bit quantity.
This issue has been found by inspection. Surprisingly, that bug was latent, and
it never negatively affected any existing upstream targets.
This patch fixes the wrong definition of ResourceUnitMask, and adds a bunch of
extra debug prints to help debugging potential issues related to invalid
processor resource masks.
llvm-svn: 350820
Added field 'MustIssueImmediately' to the instruction descriptor of instructions
that only consume in-order issue/dispatch processor resources.
This speeds up queries from the hardware Scheduler, and gives an average ~5%
speedup on a release build.
No functional change intended.
llvm-svn: 350397
Method ResourceManager::use() is responsible for updating the internal state of
used processor resources, as well as notifying resource groups that contain used
resources.
Before this patch, method 'use()' didn't know how to quickly obtain the set of
groups that contain a particular resource unit. It had to discover groups by
perform a potentially slow search (done by iterating over the set of processor
resource descriptors).
With this patch, the relationship between resource units and groups is stored in
the ResourceManager. That means, method 'use()' no longer has to search for
groups. This gives an average speedup of ~4-5% on a release build.
This patch also adds extra code comments in ResourceManager.h to better describe
the resource mask layout, and how resouce indices are computed from resource
masks.
llvm-svn: 350387
Class InstrBuilder wrongly assumed that llvm targets were always able to return
a non-null pointer when createMCInstrAnalysis() was called on them.
This was causing crashes when simulating executions for targets that don't
provide an MCInstrAnalysis object.
This patch fixes the issue by making MCInstrAnalysis optional.
llvm-svn: 349352
