1
0
mirror of https://github.com/RPCS3/llvm-mirror.git synced 2024-10-30 07:22:55 +01:00
Commit Graph

2596 Commits

Author SHA1 Message Date
Ulrich Weigand
ca3157e646 [PowerPC] Add some FIXMEs
A bunch of extendend mnemomics ought to support '.' forms.
Add FIXMEs to the test case for those.

llvm-svn: 184757
2013-06-24 17:00:22 +00:00
Ulrich Weigand
719e95004a [PowerPC] Add predicted forms of branches
This adds support for the predicted forms of branches (+/-).
There are three cases to consider:
- Branches using a PPC::Predicate code
  For these, I've added new PPC::Predicate codes corresponding
  to the BO values for predicted branch forms, and updated insn
  printing to print them correctly.  I've also added new aliases
  for the asm parser matching the new forms.
- bt/bf
  I've added new aliases matching to gBC etc.
- bd(n)z variants
  I've added new instruction patterns for the predicted forms.

In all cases, the new patterns are used for the asm parser only.
(The new infrastructure ought to be sufficient to allow use by
the compiler too at some point.)

llvm-svn: 184754
2013-06-24 16:52:04 +00:00
Ulrich Weigand
5349a508ea [PowerPC] Add t/f branch mnemonics to asm parser
This adds the bt/bf/bd(n)zt/bd(n)zf mnemonics as aliases for the
asm parser, resolving to the generic conditional patterns.

llvm-svn: 184725
2013-06-24 12:49:20 +00:00
Ulrich Weigand
5f83058705 [PowerPC] Support generic conditional branches in asm parser
This adds instruction patterns to cover the generic forms of
the conditional branch instructions.  This allows the assembler
to support the generic mnemonics.

The compiler will still generate the various specific forms
of the instruction that were already supported.

llvm-svn: 184722
2013-06-24 11:55:21 +00:00
Ulrich Weigand
0dd44327b0 [PowerPC] Support absolute branches
There is currently only limited support for the "absolute" variants
of branch instructions.  This patch adds support for the absolute
variants of all branches that are currently otherwise supported.

This requires adding new fixup types so that the correct variant
of relocation type can be selected by the object writer.

While the compiler will continue to usually choose the relative
branch variants, this will allow the asm parser to fully support
the absolute branches, with either immediate (numerical) or
symbolic target addresses.

No change in code generation intended.

llvm-svn: 184721
2013-06-24 11:03:33 +00:00
Ulrich Weigand
19b0f3dd0c [PowerPC] Support bd(n)zl and bd(n)zlrl
This adds support for the bd(n)zl and bd(n)zlrl instructions.
The patterns are currently used for the asm parser only.

llvm-svn: 184720
2013-06-24 11:02:38 +00:00
Ulrich Weigand
5c11c4d795 [PowerPC] Support b(cond)l in the asm parser
This patch adds support for the conditional variants of bl.
The pattern is currently used by the asm parser only.

llvm-svn: 184719
2013-06-24 11:02:19 +00:00
Ulrich Weigand
3a0dd840c3 [PowerPC] Support blrl and variants in the asm parser
This patch adds support for blrl and its conditional variants.
The patterns are (currently) used for the asm parser only.

llvm-svn: 184718
2013-06-24 11:01:55 +00:00
Amaury de la Vieuville
550e6ef18f ARM: check predicate bits for thumb instructions
When encoded to thumb, VFP instruction and VMOV/VDUP between scalar and
core registers, must have their predicate bit to 0b1110.

llvm-svn: 184707
2013-06-24 09:15:01 +00:00
Amaury de la Vieuville
37b2270352 ARM: rGPR is meant to be unpredictable, not undefined
llvm-svn: 184706
2013-06-24 09:14:54 +00:00
Amaury de la Vieuville
5a373a526e ARM: fix thumb1 nop decoding
In thumb1, NOP is a pseudo-instruction equivalent to mov r8, r8.
However the disassembler should not use this alias.

llvm-svn: 184703
2013-06-24 09:11:53 +00:00
Amaury de la Vieuville
6eecd3f2cb ARM: fix IT decoding
mask == 0 -> UNPRED

llvm-svn: 184702
2013-06-24 09:11:45 +00:00
Amaury de la Vieuville
0d7ac788f2 ARM: enable decoding of pc-relative PLD/PLI
llvm-svn: 184701
2013-06-24 09:11:38 +00:00
Tim Northover
b9f0bb7e98 AArch64: fix overzealous NEXTing for Windows testing.
llvm-svn: 184667
2013-06-23 15:32:01 +00:00
Ulrich Weigand
3720d45002 [PowerPC] Support R_PPC_REL16 family of relocations
The GNU assembler supports (as extension to the ABI) use of PC-relative
relocations in half16 fields, which allows writing code like:

  li 1, base-.

This patch adds support for those relocation types in the assembler.

llvm-svn: 184552
2013-06-21 14:44:37 +00:00
Ulrich Weigand
d5bb2945ff [PowerPC] Support various tls-related modifiers
The current code base only supports the minimum set of tls-related
relocations and @modifiers that are necessary to support compiler-
generated code.  This patch extends this to the full set defined
in the ABI (and supported by the GNU assembler) for the benefit
of the assembler parser.

llvm-svn: 184551
2013-06-21 14:44:15 +00:00
Ulrich Weigand
325653d5a4 [PowerPC] Support @higher et.al. modifiers
This adds support for the @higher, @highera, @highest, and @highesta
modifers, including some missing relocation types.

llvm-svn: 184550
2013-06-21 14:43:42 +00:00
Ulrich Weigand
283132010a [PowerPC] Support @toc@h modifier
This adds the relocation type and other necessary infrastructure
to use the @toc@h modifier in the assembler.

llvm-svn: 184549
2013-06-21 14:43:10 +00:00
Ulrich Weigand
02d460319a [PowerPC] Support @h modifier
This adds necessary infrastructure to support the @h modifier.
Note that all required relocation types were already present
(and unused).

This patch provides support for using @h in the assembler;
it would also be possible to now use this feature in code
generated by the compiler, but this is not done yet.

llvm-svn: 184548
2013-06-21 14:42:49 +00:00
Kevin Enderby
b71a2e2f2e Update the X86 disassembler to use xacquire and xrelease when appropriate.
This is a bit tricky as the xacquire and xrelease hints use the same bytes,
0xf2 and 0xf3, as the repne and rep prefixes.

Fortunately llvm has different llvm MCInst Opcode enums for rep/xrelease
and repne/xacquire. So to make this work a boolean was added the
InternalInstruction struct as part of the Prefix state which is set with the
added logic in readPrefixes() when decoding an instruction to determine
if these prefix bytes are to be disassembled as xacquire or xrelease.  Then
we let the matcher pick the normal prefix instructionID and we change the
Opcode after that when it is set into the MCInst being created.

rdar://11019859

llvm-svn: 184490
2013-06-20 22:32:18 +00:00
Joey Gouly
a600985f50 This reverts r155000.
The cdp2 instruction should have the same restrictions as cdp on the
co-processor registers.

VFP instructions on v8/AArch32 share the same encoding space as cdp2.

llvm-svn: 184445
2013-06-20 17:42:36 +00:00
Ulrich Weigand
8c70d558d3 [MC] Support @ variants with directional labels
The assembler parser common code supports recognizing symbol variants
using the @ modifer.  On PowerPC, it should also be possible to use
(some of) those modifiers with directional labels, like "1f@l".

This patch adds support for accepting symbol variants on directional
labels as well.

llvm-svn: 184437
2013-06-20 16:24:17 +00:00
Ulrich Weigand
99f0423d50 [PowerPC] Optimize @ha/@l constructs
This patch adds support for having the assembler optimize fixups
to constructs like "symbol@ha" or "symbol@l" if "symbol" can be
resolved at assembler time.

This optimization is already present in the PPCMCExpr.cpp code
for handling PPC_HA16/PPC_LO16 target expressions.  However,
those target expression were used only on Darwin targets.

This patch changes target expression code so that they are
usable also with the GNU assembler (using the @ha / @l syntax
instead of the ha16() / lo16() syntax), and changes the
MCInst lowering code to generate those target expressions
where appropriate.

It also changes the asm parser to generate HA16/LO16 target
expressions when parsing assembler source that uses the
@ha / @l modifiers.  The effect is that now the above-
mentioned optimization automatically becomes available
for those situations too.
 

llvm-svn: 184436
2013-06-20 16:23:52 +00:00
Ulrich Weigand
e143b13aca [PowerPC] Support compare mnemonics with implied CR0
Just like for branch mnemonics (where support was recently added), the
assembler is supposed to support extended mnemonics for the compare
instructions where no condition register is specified explicitly
(and CR0 is assumed implicitly).

This patch adds support for those extended compare mnemonics.


Index: llvm-head/test/MC/PowerPC/ppc64-encoding-ext.s
===================================================================
--- llvm-head.orig/test/MC/PowerPC/ppc64-encoding-ext.s
+++ llvm-head/test/MC/PowerPC/ppc64-encoding-ext.s
@@ -449,21 +449,37 @@
 
 # CHECK: cmpdi 2, 3, 128                 # encoding: [0x2d,0x23,0x00,0x80]
          cmpdi 2, 3, 128
+# CHECK: cmpdi 0, 3, 128                 # encoding: [0x2c,0x23,0x00,0x80]
+         cmpdi 3, 128
 # CHECK: cmpd 2, 3, 4                    # encoding: [0x7d,0x23,0x20,0x00]
          cmpd 2, 3, 4
+# CHECK: cmpd 0, 3, 4                    # encoding: [0x7c,0x23,0x20,0x00]
+         cmpd 3, 4
 # CHECK: cmpldi 2, 3, 128                # encoding: [0x29,0x23,0x00,0x80]
          cmpldi 2, 3, 128
+# CHECK: cmpldi 0, 3, 128                # encoding: [0x28,0x23,0x00,0x80]
+         cmpldi 3, 128
 # CHECK: cmpld 2, 3, 4                   # encoding: [0x7d,0x23,0x20,0x40]
          cmpld 2, 3, 4
+# CHECK: cmpld 0, 3, 4                   # encoding: [0x7c,0x23,0x20,0x40]
+         cmpld 3, 4
 
 # CHECK: cmpwi 2, 3, 128                 # encoding: [0x2d,0x03,0x00,0x80]
          cmpwi 2, 3, 128
+# CHECK: cmpwi 0, 3, 128                 # encoding: [0x2c,0x03,0x00,0x80]
+         cmpwi 3, 128
 # CHECK: cmpw 2, 3, 4                    # encoding: [0x7d,0x03,0x20,0x00]
          cmpw 2, 3, 4
+# CHECK: cmpw 0, 3, 4                    # encoding: [0x7c,0x03,0x20,0x00]
+         cmpw 3, 4
 # CHECK: cmplwi 2, 3, 128                # encoding: [0x29,0x03,0x00,0x80]
          cmplwi 2, 3, 128
+# CHECK: cmplwi 0, 3, 128                # encoding: [0x28,0x03,0x00,0x80]
+         cmplwi 3, 128
 # CHECK: cmplw 2, 3, 4                   # encoding: [0x7d,0x03,0x20,0x40]
          cmplw 2, 3, 4
+# CHECK: cmplw 0, 3, 4                   # encoding: [0x7c,0x03,0x20,0x40]
+         cmplw 3, 4
 
 # FIXME: Trap mnemonics
 
Index: llvm-head/lib/Target/PowerPC/PPCInstrInfo.td
===================================================================
--- llvm-head.orig/lib/Target/PowerPC/PPCInstrInfo.td
+++ llvm-head/lib/Target/PowerPC/PPCInstrInfo.td
@@ -2201,3 +2201,12 @@ defm : BranchExtendedMnemonic<"ne", 68>;
 defm : BranchExtendedMnemonic<"nu", 100>;
 defm : BranchExtendedMnemonic<"ns", 100>;
 
+def : InstAlias<"cmpwi $rA, $imm", (CMPWI CR0, gprc:$rA, s16imm:$imm)>;
+def : InstAlias<"cmpw $rA, $rB", (CMPW CR0, gprc:$rA, gprc:$rB)>;
+def : InstAlias<"cmplwi $rA, $imm", (CMPLWI CR0, gprc:$rA, u16imm:$imm)>;
+def : InstAlias<"cmplw $rA, $rB", (CMPLW CR0, gprc:$rA, gprc:$rB)>;
+def : InstAlias<"cmpdi $rA, $imm", (CMPDI CR0, g8rc:$rA, s16imm:$imm)>;
+def : InstAlias<"cmpd $rA, $rB", (CMPD CR0, g8rc:$rA, g8rc:$rB)>;
+def : InstAlias<"cmpldi $rA, $imm", (CMPLDI CR0, g8rc:$rA, u16imm:$imm)>;
+def : InstAlias<"cmpld $rA, $rB", (CMPLD CR0, g8rc:$rA, g8rc:$rB)>;
+

llvm-svn: 184435
2013-06-20 16:15:12 +00:00
Vladimir Medic
af5979fc83 Optimize register parsing for MipsAsmParser. Allow symbolic aliases for FPU registers.
llvm-svn: 184411
2013-06-20 11:21:49 +00:00
Ulrich Weigand
ef862011f0 [MC/DWARF] Generate multiple .debug_line entries for adjacent .loc directives
The compiler occasionally generates multiple .loc directives in a row
(at the same instruction address).  These need to be transformed into
multple actual .debug_line table entries, since they are used to signal
certain information to the debugger (e.g. if the opening brace of a
function body is on the same line as the declaration).

The MCAsmStreamer version of EmitDwarfLocDirective handles this
correctly by emitting a .loc directive every time it is called.
However, the MCObjectStream version simply defaults to recording
the information and emitting only a single table entry later,
e.g. when EmitInstruction is called.

This patch introduces a MCAsmStreamer::EmitDwarfLocDirective
version that emits a line table entry for a .loc directive
that may already be pending before recording the new directive.
(This is similar to how this is handled in GNU as.)

With this patch (and the code alignment factor patch) applied,
I'm now getting identical DWARF .debug sections for all test-suite
object files on PowerPC for the internal and the external assembler.

llvm-svn: 184357
2013-06-19 21:27:27 +00:00
Jim Grosbach
0f0c0ac8be ARM: Add optional datatype suffix to NEON mvn asm syntax.
rdar://14194152

llvm-svn: 184244
2013-06-18 21:49:21 +00:00
Kevin Enderby
cb41cc56c6 Change the arm assembler to support this from the v7c spec:
"When assembling to the ARM instruction set, the .N qualifier produces
an assembler error and the .W qualifier has no effect."

In the pre-matcher handler in the asm parser the ".w" (wide) qualifier 
when in ARM mode is now discarded. And an error message is now
produced when the ".n" (narrow) qualifier is used in ARM mode.

Test cases for these were added.

rdar://14064574

llvm-svn: 184224
2013-06-18 20:19:24 +00:00
Jack Carter
016185840e Mips ELF: Mark object file as ABI compliant
When producing objects that are abi compliant we are 
marking neither the object file nor the assembly file
correctly and thus generate warnings. 

We need to set the EF_CPIC flag in the ELF header when
generating direct object.

Note that the warning is only generated when compiling without PIC.

When compiling with clang the warning will be suppressed by supplying:

 -Wa,-mno-shared -Wa,-call_nonpic

Also the following directive should also be added:

	.option	pic0

when compiling without PIC,  This eliminates the need for supplying:

  -mno-shared -call_nonpic

on the assembler command line.

Patch by Douglas Gilmore

llvm-svn: 184220
2013-06-18 19:47:15 +00:00
Stefanus Du Toit
aa267b3e82 Add support for encoding the HLE XACQUIRE and XRELEASE prefixes.
For decoding, keep the current behavior of always decoding these as their REP
versions. In the future, this could be improved to recognize the cases where
these behave as XACQUIRE and XRELEASE and decode them as such.

llvm-svn: 184207
2013-06-18 17:08:10 +00:00
Amaury de la Vieuville
0c0f005a15 ARM: fix literal load with positive offset encoding
When using a positive offset, literal loads where encoded
as if it was negative, because:
- The sign bit was not assigned to an operand
- The addrmode_imm12 operand was not encoding the sign bit correctly

This patch also makes the assembler look at the .w/.n specifier for
loads.

llvm-svn: 184182
2013-06-18 08:13:05 +00:00
Amaury de la Vieuville
f28bf33894 ARM: add operands pre-writeback variants when needed
llvm-svn: 184181
2013-06-18 08:12:51 +00:00
Amaury de la Vieuville
8d8456b196 ARM: fix thumb literal loads decoding
This fixes two previous issues:
- Negative offsets were not correctly disassembled
- The decoded opcodes were not the right one

llvm-svn: 184180
2013-06-18 08:03:06 +00:00
Amaury de la Vieuville
e6ed8ad5df ARM: thumb stores cannot use PC as dest register
llvm-svn: 184179
2013-06-18 08:02:56 +00:00
Tim Northover
3231ab74d4 AArch64: print relocation addends if present on AArch64
llvm-objdump should provide some way of printing out the addends present in the
.rela sections for debugging purposes if nothing else.

llvm-svn: 184072
2013-06-17 03:03:06 +00:00
Amaury de la Vieuville
13c4894a31 ARM: fix thumb coprocessor instruction with pre-writeback disassembly
was        stc2 p0, c0, [r0]!
instead of stc2 p0, c0, [r0,#0]!

llvm-svn: 183975
2013-06-14 11:21:35 +00:00
Amaury de la Vieuville
6aadbcd8b4 ARM: fix B decoding
llvm-svn: 183914
2013-06-13 16:41:55 +00:00
Amaury de la Vieuville
6e5b103269 ARM: fix t2am_imm8_offset operand printing for imm=#-0
llvm-svn: 183913
2013-06-13 16:40:51 +00:00
Benjamin Kramer
f458149c7d X86: Make the cmov aliases work with intel syntax too.
llvm-svn: 183907
2013-06-13 15:45:24 +00:00
Ulrich Weigand
2666834190 [MC/DWARF] Support .debug_frame / .debug_line code alignment factors
I've been comparing the object file output of LLVM's integrated
assembler against the external assembler on PowerPC, and one
area where differences still remain are in DWARF sections.

In particular, the GNU assembler generates .debug_frame and
.debug_line sections using a code alignment factor of 4, since
all PowerPC instructions have size 4 and must be aligned to a
multiple of 4.  However, current MC code hard-codes a code
alignment factor of 1.

This patch changes this by adding a "minimum instruction alignment"
data element to MCAsmInfo and using this as code alignment factor.

This requires passing a MCContext into MCDwarfLineAddr::Encode
and MCDwarfLineAddr::EncodeAdvanceLoc.  Note that one caller,
MCDwarfLineAddr::Write, didn't actually have that information
available.  However, it turns out that this routine is in fact
never used in the whole code base, so the patch simply removes
it.  If it turns out to be needed again at a later time, it
could be re-added with an updated interface.

llvm-svn: 183834
2013-06-12 14:46:54 +00:00
Ulrich Weigand
307b53fe55 [PowerPC] Use assembler source in MC tests
A couple of old test cases in test/MC/PowerPC were still using
LLVM IR.  Now that we have a working assembler, we can move
them to assembler tests instead:
  ppc64-initial-cfa.ll
  ppc64-relocs-01.ll
  ppc64-tls-relocs-01.ll

llvm-svn: 183829
2013-06-12 14:14:18 +00:00
NAKAMURA Takumi
bc128ca9be Rework r183728, suppress assert(0) for now. Its behavior depends on assertions on win32 hosts.
FIXME: Introduce yet another checker but assert(0).
llvm-svn: 183736
2013-06-11 10:01:42 +00:00
Mihai Popa
2b26ef36f1 It adds support for negative zero offsets for loads and stores.
Negative zero is returned by the primary expression parser as INT32_MIN, so all that the method needs to do is to accept this value.
Behavior already present for Thumb2.

llvm-svn: 183734
2013-06-11 09:48:35 +00:00
Mihai Popa
30b6bcc387 This patch adds support for FPINST/FPINST2 as operands to vmsr/vmrs. These are optional registers that may be supported some ARM implementations to aid with resolution of floating point exceptions. The manual pages for vmsr and vmrs do not detail their use. Encodings and other information can be found in ARM Architecture Reference Manual section F, chapter 6, paragraph 3.
llvm-svn: 183733
2013-06-11 09:39:51 +00:00
Amaury de la Vieuville
334567de5c ARM: Enforce decoding rules for VLDn instructions
llvm-svn: 183731
2013-06-11 08:14:14 +00:00
Amaury de la Vieuville
896fff0d7e ARM: Fix STREX/LDREX reecoding
The decoded MCInst wasn't reencoded as the same instruction

llvm-svn: 183729
2013-06-11 08:03:20 +00:00
NAKAMURA Takumi
5bdf4d5248 Tweak a couple of tests on win32 hosts with +Asserts.
- Don't use assert(0), or tests may pass or fail according to assertions.
  - For now, The tests are marked as XFAIL for win32 hosts.

FIXME: Could we avoid XFAIL to specify triple in the RUN lines?
llvm-svn: 183728
2013-06-11 06:52:58 +00:00
Tim Northover
2ca847f56b ARM: diagnose ARM/Thumb assembly switches on CPUs only supporting one.
Some ARM CPUs only support ARM mode (ancient v4 ones, for example) and some
only support Thumb mode (M-class ones currently). This makes sure such CPUs
default to the correct mode and makes the AsmParser diagnose an attempt to
switch modes incorrectly.

rdar://14024354

llvm-svn: 183710
2013-06-10 23:20:58 +00:00
Ulrich Weigand
e6017e3db4 [PowerPC] Support extended sc mnemonic
A plain "sc" without argument is supposed to be treated like "sc 0"
by the assembler.  This patch adds a corresponding alias.

Problem reported by Joerg Sonnenberger.

llvm-svn: 183687
2013-06-10 17:19:43 +00:00
Ulrich Weigand
c6ff974cac [PowerPC] Support branch mnemonics with implied CR0
The extended branch mnemonics are supposed to use an implied CR0
if there is no explicit condition register specified.  This patch
adds extra variants of the mnemonics to this effect.

Problem reported by Joerg Sonnenberger.

llvm-svn: 183686
2013-06-10 17:19:15 +00:00
Amaury de la Vieuville
477311794b ARM: ISB cannot be passed the same options as DMB
ISB should only accepts full system sync, other options are reserved

llvm-svn: 183656
2013-06-10 14:17:08 +00:00
Logan Chien
fa2266ded0 Fix ARM unwind opcode assembler in several cases.
Changes to ARM unwind opcode assembler:

* Fix multiple .save or .vsave directives.  Besides, the
  order is preserved now.

* For the directives which will generate multiple opcodes,
  such as ".save {r0-r11}", the order of the unwind opcode
  is fixed now, i.e. the registers with less encoding value
  are popped first.

* Fix the $sp offset calculation.  Now, we can use the
  .setfp, .pad, .save, and .vsave directives at any order.

Changes to test cases:

* Add test cases to check the order of multiple opcodes
  for the .save directive.

* Fix the incorrect $sp offset in the test case.  The
  stack pointer offset specified in the test case was
  incorrect.  (Changed test cases: ehabi-mc-section.ll and
  ehabi-mc.ll)

* The opcode to restore $sp are slightly reordered.  The
  behavior are not changed, and the new output is same
  as the output of GNU as.  (Changed test cases:
  eh-directive-pad.s and eh-directive-setfp.s)

llvm-svn: 183627
2013-06-09 12:22:30 +00:00
Amaury de la Vieuville
534a068d9a ARM: fix VMOVvnf32 decoding when ambiguous with VCVT
Enforce Table A7-15 (op=1, cmode=0b111) -> UNDEF

llvm-svn: 183612
2013-06-08 13:54:05 +00:00
Amaury de la Vieuville
2e930b0bbe ARM: enforce SRS decoding constraints
llvm-svn: 183611
2013-06-08 13:43:59 +00:00
Amaury de la Vieuville
594f70fb57 ARM: fix CPS decoding when ambiguous with QADD
Handle the case when the disassembler table can't tell
the difference between some encodings of QADD and CPS.

Add some necessary safe guards in CPS decoding as well.

llvm-svn: 183610
2013-06-08 13:38:52 +00:00
Amaury de la Vieuville
31c75d7ce5 ARM: fix VCVT decoding
UNPRED was reported instead of UNDEF

llvm-svn: 183608
2013-06-08 13:29:11 +00:00
Rafael Espindola
a3def11c27 Don't hide the first ELF symbol.
The first symbol on ELF is dummy, but it has a defined content and readelf
normally displays it. With this change llvm-readobj also displays it and we
can check that llvm-mc output is correct according to the standard.

llvm-svn: 183337
2013-06-05 20:33:54 +00:00
Mihai Popa
3e61924089 This is a simple patch that changes RRX and RRXS to accept all registers as operands.
According to the ARM reference manual, RRX(S) have defined encodings for lr, pc and sp.

llvm-svn: 183307
2013-06-05 13:23:51 +00:00
Tim Northover
ba543b13e1 ARM: permit upper-case BE/LE on setend instruction
Patch by Amaury de la Vieuville.

llvm-svn: 183012
2013-05-31 15:58:45 +00:00
Tim Northover
2a437cba0e ARM: add fstmx and fldmx instructions for assembly
These instructions are deprecated oddities, but we still need to be able to
disassemble (and reassemble) them if and when they're encountered.

Patch by Amaury de la Vieuville.

llvm-svn: 183011
2013-05-31 15:55:51 +00:00
Tim Northover
6b0f4fd85b ARM: fix VEXT encoding corner case
The disassembly of VEXT instructions was too lax in the bits checked. This
fixes the case where the instruction affects Q-registers but a misaligned lane
was specified (should be UNDEFINED).

Patch by Amaury de la Vieuville

llvm-svn: 183003
2013-05-31 13:47:25 +00:00
Rafael Espindola
5b34d5a3c7 Change how we iterate over relocations on ELF.
For COFF and MachO, sections semantically have relocations that apply to them.
That is not the case on ELF.

In relocatable objects (.o), a section with relocations in ELF has offsets to
another section where the relocations should be applied.

In dynamic objects and executables, relocations don't have an offset, they have
a virtual address. The section sh_info may or may not point to another section,
but that is not actually used for resolving the relocations.

This patch exposes that in the ObjectFile API. It has the following advantages:

* Most (all?) clients can handle this more efficiently. They will normally walk
all relocations, so doing an effort to iterate in a particular order doesn't
save time.

* llvm-readobj now prints relocations in the same way the native readelf does.

* probably most important, relocations that don't point to any section are now
visible. This is the case of relocations in the rela.dyn section. See the
updated relocation-executable.test for example.

llvm-svn: 182908
2013-05-30 03:05:14 +00:00
Richard Sandiford
b62e20c071 [SystemZ] Immediate compare-and-branch support
This patch adds support for the CIJ and CGIJ instructions.

llvm-svn: 182846
2013-05-29 11:58:52 +00:00
Jack Carter
81964ccca4 Mips assembler: Improve set register alias handling
This patch solves the problem of numeric register values not being accepted:

../set_alias.s:1:11: error: expected valid expression after comma
        .set    r4,$4
                    ^
The parsing of .set directive is changed and handling of symbols in code 
as well to enable this feature. 

The test example is added.

Patch by Vladimir Medic

llvm-svn: 182807
2013-05-28 22:21:05 +00:00
Richard Sandiford
4b6cfd7cec [SystemZ] Register compare-and-branch support
This patch adds support for the CRJ and CGRJ instructions.  Support for
the immediate forms will be a separate patch.

The architecture has a large number of comparison instructions.  I think
it's generally better to concentrate on using the "best" comparison
instruction first and foremost, then only use something like CRJ if
CR really was the natual choice of comparison instruction.  The patch
therefore opportunistically converts separate CR and BRC instructions
into a single CRJ while emitting instructions in ISelLowering.

llvm-svn: 182764
2013-05-28 10:41:11 +00:00
Cameron Zwarich
fe498a1e92 Add support for DWARF line number table entries for values in the instruction
stream.

llvm-svn: 182712
2013-05-25 21:56:53 +00:00
Richard Sandiford
1fe54d3978 [SystemZ] Improve AsmParser handling of invalid instructions
Previously, an invalid instruction like:

	foo     %r1, %r0

would generate the rather odd error message:

....: error: unknown token in expression
	foo     %r1, %r0
		^

We now get the more informative:

....: error: invalid instruction
	foo     %r1, %r0
	^

The same would happen if an address were used where a register was expected.
We now get "invalid operand for instruction" instead.

llvm-svn: 182644
2013-05-24 14:26:46 +00:00
Richard Sandiford
8adb53208b [SystemZ] Improve AsmParser register parsing
The idea is to make sure that:

(1) "register expected" is restricted to cases where ParseRegister()
    is called and the token obviously isn't a register.

(2) "invalid register" is restricted to cases where a register-like "%..."
    sequence is found, but the "..." makes no sense.

(3) the generic "invalid operand for instruction" is used in cases where
    the wrong register type is used (GPR instead of FPR, etc.).

(4) the new "invalid register pair" is used if the register has the right type,
    but is not a valid register pair.

Testing of (1)-(3) is now restricted to regs-bad.s.  It uses a representative
instruction for each register class to make sure that only registers from
that class are accepted.

(4) is tested by both regs-bad.s (which checks all invalid register pairs)
and insn-bad.s (which tests one invalid pair for each instruction that
requires a pair).

While there, I changed "Number" to "Num" for consistency with the
operand class.

llvm-svn: 182643
2013-05-24 14:14:38 +00:00
Mihai Popa
d42b1e0685 VSTn instructions have a number of encoding constraints which are not implemented. I have added these using wrapper methods around the original custom decoder (incidentally - this is a huge poorly written method that should be cleaned up. I have left it as is since the changes would be much to hard to review).
llvm-svn: 182281
2013-05-20 14:57:05 +00:00
Mihai Popa
dbf8d46d3c Q registers are encoded in fields of the same length as D registers. As Q registers are half as many, the ARM reference manual mandates the least significant bit to be zeroed out. Failure to do so should result in an undefined instruction. With this change test/MC/Disassembler/ARM/invalid-VQADD-arm.txt is passing (removed XFAIL).
llvm-svn: 182279
2013-05-20 14:42:43 +00:00
Ulrich Weigand
24cfcf8f49 [PowerPC] Merge/rename PPC fixup types
Now that fixup_ppc_ha16 and fixup_ppc_lo16 are being treated exactly
the same everywhere, it no longer makes sense to have two fixup types.

This patch merges them both into a single type fixup_ppc_half16,
and renames fixup_ppc_lo16_ds to fixup_ppc_half16ds for consistency.
(The half16 and half16ds names are taken from the description of
relocation types in the PowerPC ABI.)

No change in code generation expected.

llvm-svn: 182092
2013-05-17 12:37:21 +00:00
Ulrich Weigand
89ebba5af6 [PowerPC] Fix processing of ha16/lo16 fixups
The current PowerPC MC back end distinguishes between fixup_ppc_ha16
and fixup_ppc_lo16, which are determined by the instruction the fixup
applies to, and uses this distinction to decide whether a fixup ought
to resolve to the high or the low part of a symbol address.

This isn't quite correct, however.  It is valid -if unusual- assembler
to use, e.g.
  li 1, symbol@ha
or
  lis 1, symbol@l
Whether the high or the low part of the address is used depends solely
on the @ suffix, not on the instruction.

In addition, both
  li 1, symbol
and
  lis 1, symbol
are valid, assuming the symbol address fits into 16 bits; again, both
will then refer to the actual symbol value (so li will load the value
itself, while lis will load the value shifted by 16).


To fix this, two places need to be adapted.  If the fixup cannot be
resolved at assembler time, a relocation needs to be emitted via
PPCELFObjectWriter::getRelocType.  This routine already looks at
the VK_ type to determine the relocation.  The only problem is that
will reject any _LO modifier in a ha16 fixup and vice versa.  This
is simply incorrect; any of those modifiers ought to be accepted
for either fixup type.

If the fixup *can* be resolved at assembler time, adjustFixupValue
currently selects the high bits of the symbol value if the fixup
type is ha16.  Again, this is incorrect; see the above example
  lis 1, symbol

Now, in theory we'd have to respect a VK_ modifier here.  However,
in fact common code never even attempts to resolve symbol references
using any nontrivial VK_ modifier at assembler time; it will always
fall back to emitting a reloc and letting the linker handle it.

If this ever changes, presumably there'd have to be a target callback
to resolve VK_ modifiers.  We'd then have to handle @ha etc. there.

llvm-svn: 182091
2013-05-17 12:36:29 +00:00
Jack Carter
0c75cd3c10 Mips assembler: Add TwoOperandConstraint definitions
This patch removes alias definition for addiu $rs,$imm 
and instead uses the TwoOperandAliasConstraint field in 
the ArithLogicI instruction class. 

This way all instructions that inherit ArithLogicI class 
have the same macro defined. 

The usage examples are added to test files.

Patch by Vladimir Medic

llvm-svn: 182048
2013-05-16 20:24:27 +00:00
Jack Carter
8986125dda Mips assembler: Add branch macro definitions
This patch adds bnez and beqz instructions which represent alias definitions for bne and beq instructions as follows:
bnez $rs,$imm => bne $rs,$zero,$imm
beqz $rs,$imm => beq $rs,$zero,$imm

The corresponding test cases are added.

Patch by Vladimir Medic

llvm-svn: 182040
2013-05-16 19:40:19 +00:00
Ulrich Weigand
0325b4909d [PowerPC] Remove need for adjustFixupOffst hack
Now that applyFixup understands differently-sized fixups, we can define
fixup_ppc_lo16/fixup_ppc_lo16_ds/fixup_ppc_ha16 to properly be 2-byte
fixups, applied at an offset of 2 relative to the start of the 
instruction text.

This has the benefit that if we actually need to generate a real
relocation record, its address will come out correctly automatically,
without having to fiddle with the offset in adjustFixupOffset.

Tested on both 64-bit and 32-bit PowerPC, using external and
integrated assembler.

llvm-svn: 181894
2013-05-15 15:07:06 +00:00
Richard Sandiford
1ccc224047 [SystemZ] Make use of SUBTRACT HALFWORD
Thanks to Ulrich Weigand for noticing that this instruction was missing.

llvm-svn: 181893
2013-05-15 15:05:29 +00:00
Ulrich Weigand
5062453e37 [PowerPC] Add test case for r181891
llvm-svn: 181892
2013-05-15 15:02:12 +00:00
Richard Sandiford
2a8800d599 [SystemZ] Consolidate disassembler tests for valid input into 2 big tests
llvm-svn: 181879
2013-05-15 11:00:31 +00:00
Richard Sandiford
978bf2bb83 [SystemZ] Consolidate assembler tests into 4 big tests
llvm-svn: 181878
2013-05-15 09:58:19 +00:00
Bill Schmidt
b5b390b792 Implement the PowerPC system call (sc) instruction.
Instruction added at request of Roman Divacky.  Tested via asm-parser.

llvm-svn: 181821
2013-05-14 19:35:45 +00:00
Derek Schuff
812ee5bc7c Fix ARM FastISel tests, as a first step to enabling ARM FastISel
ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on
enabling it for other targets. As a first step I've fixed some of the tests.
Changes to ARM FastISel tests:
- Different triples don't generate the same relocations (especially
  movw/movt versus constant pool loads). Use a regex to allow either.
- Mangling is different. Use a regex to allow either.
- The reserved registers are sometimes different, so registers get
  allocated in a different order. Capture the names only where this
  occurs.
- Add -verify-machineinstrs to some tests where it works. It doesn't
  work everywhere it should yet.
- Add -fast-isel-abort to many tests that didn't have it before.
- Split out the VarArg test from fast-isel-call.ll into its own
  test. This simplifies test setup because of --check-prefix.

Patch by JF Bastien

llvm-svn: 181801
2013-05-14 16:26:38 +00:00
Richard Sandiford
77796bbc7d [SystemZ] Add disassembler support
llvm-svn: 181777
2013-05-14 10:17:52 +00:00
Richard Sandiford
1e058df80c [SystemZ] Add extra testscases for r181773
Forgot to svn add these...

llvm-svn: 181774
2013-05-14 09:49:11 +00:00
Richard Sandiford
4850b2341b [SystemZ] Rework handling of constant PC-relative operands
The GNU assembler treats things like:

        brasl   %r14, 100

in the same way as:

        brasl   %r14, .+100

rather than as a branch to absolute address 100.  We implemented this in
LLVM by creating an immediate operand rather than the usual expr operand,
and by handling immediate operands specially in the code emitter.
This was undesirable for (at least) three reasons:

- the specialness of immediate operands was exposed to the backend MC code,
  rather than being limited to the assembler parser.

- in disassembly, an immediate operand really is an absolute address.
  (Note that this means reassembling printed disassembly can't recreate
  the original code.)

- it would interfere with any assembly manipulation that we might
  try in future.  E.g. operations like branch shortening can change
  the relative position of instructions, but any code that updates
  sym+offset addresses wouldn't update an immediate "100" operand
  in the same way as an explicit ".+100" operand.

This patch changes the implementation so that the assembler creates
a "." label for immediate PC-relative operands, so that the operand
to the MCInst is always the absolute address.  The patch also adds
some error checking of the offset.

llvm-svn: 181773
2013-05-14 09:47:26 +00:00
Jack Carter
c0737806ad Mips assembler: Assembler macro ADDIU $rs,imm
This patch adds alias for addiu instruction which enables following syntax:

    addiu $rs,imm

The macro is translated as:

    addiu $rs,$rs,imm


Contributer: Vladimir Medic
llvm-svn: 181729
2013-05-13 20:26:46 +00:00
Mihai Popa
7a2df35483 The purpose of the patch is to fix the syntax of ARM mrc and mrc2 instructions when they are used to write to the APSR. In this case, the destination operand should be APSR_nzcv, and the encoding of the target should be 0b1111 (same as for PC). In pre-UAL syntax, this form used the PC register as a textual target. This is still allowed for backward compatibility.
llvm-svn: 181705
2013-05-13 14:10:04 +00:00
Chad Rosier
7da7292b4e [ms-inline asm] Fix a crasher when we fail on a direct match.
The issue was that the MatchingInlineAsm and VariantID args to the
MatchInstructionImpl function weren't being set properly.  Specifically, when
parsing intel syntax, the parser thought it was parsing inline assembly in the
at&t dialect; that will never be the case.  

The crash was caused when the emitter tried to emit the instruction, but the
operands weren't set.  When parsing inline assembly we only set the opcode, not
the operands, which is used to lookup the instruction descriptor.
rdar://13854391 and PR15945

Also, this commit reverts r176036.  Now that we're correctly parsing the intel
syntax the pushad/popad don't match properly.  I've reimplemented that fix using
a MnemonicAlias.

llvm-svn: 181620
2013-05-10 18:24:17 +00:00
Logan Chien
d5b8ea6c58 Implement AsmParser for ARM unwind directives.
This commit implements the AsmParser for fnstart, fnend,
cantunwind, personality, handlerdata, pad, setfp, save, and
vsave directives.

This commit fixes some minor issue in the ARMELFStreamer:

* The switch back to corresponding section after the .fnend
  directive.

* Emit the unwind opcode while processing .fnend directive
  if there is no .handlerdata directive.

* Emit the unwind opcode to .ARM.extab while processing
  .handlerdata even if .personality directive does not exist.

llvm-svn: 181603
2013-05-10 16:17:24 +00:00
Chad Rosier
1c5336508d [x86AsmParser] It's valid to stop parsing an operand at an immediate.
rdar://13854369 and PR15944

llvm-svn: 181564
2013-05-09 23:48:53 +00:00
Ulrich Weigand
65402d4ff3 [PowerPC] Add ELF relocation tests
This patch extends test/MC/PowerPC/ppc64-fixups.s to not only check for
the correct fixup type in the --show-encoding output, but also runs the
generated object file through llvm-readobj -r and verifies that the
correct ELF relocation records were generated.

llvm-svn: 181453
2013-05-08 17:51:44 +00:00
Mihai Popa
6775df74f5 This patch fixes two tests marked as XFAIL among the ARM assembler tests.
The reference encoding is correct, but written in the wrong byte order (these are Thumb tests, while the reference is in ARM byte order).

llvm-svn: 181420
2013-05-08 09:41:12 +00:00
Kevin Enderby
4562d15159 Fix a bug in the MC asm parser evaluating expressions. It was treating:
A = 9
B = 3 * A - 2 * A + 1 as  B = 3 * A - (2 * A + 1)

rdar://13816516

llvm-svn: 181366
2013-05-07 21:40:58 +00:00
Ulrich Weigand
45233a4e05 [SystemZ] Add MC test cases
This adds all MC tests for the SystemZ target.

Patch by Richard Sandiford.

llvm-svn: 181206
2013-05-06 16:20:58 +00:00
Richard Osborne
816f899c45 [XCore] Add LDAPB instructions.
With the change the disassembler now supports the XCore ISA in its
entirety.

llvm-svn: 181155
2013-05-05 13:36:53 +00:00
Richard Osborne
6600501755 [XCore] Add BLRB instructions.
llvm-svn: 181152
2013-05-05 13:24:16 +00:00
Ulrich Weigand
86c774797b [PowerPC] Parse platform-specifc variant kinds in AsmParser
This patch adds support for PowerPC platform-specific variant
kinds in MCSymbolRefExpr::getVariantKindForName, and also
adds a test case to verify they are translated to the appropriate
fixup type.

llvm-svn: 181053
2013-05-03 19:52:35 +00:00
Ulrich Weigand
c7ad3c20c4 [PowerPC] Add some Book II instructions to AsmParser
This patch adds a couple of Book II instructions (isync, icbi) to the
PowerPC assembler parser.  These are needed when bootstrapping clang
with the integrated assembler forced on, because they are used in
inline asm statements in the code base.

The test case adds the full list of Book II storage control instructions,
including associated extended mnemonics.  Again, those that are not yet
supported as marked as FIXME.

llvm-svn: 181052
2013-05-03 19:51:09 +00:00
Ulrich Weigand
4b44c2d06f [PowerPC] Support extended mnemonics in AsmParser
This patch adds infrastructure to support extended mnemonics in the
PowerPC assembler parser.  It adds support specifically for those
extended mnemonics that LLVM will itself generate.

The test case lists *all* extended mnemonics according to the
PowerPC ISA v2.06 Book I, but marks those not yet supported
as FIXME.

llvm-svn: 181051
2013-05-03 19:50:27 +00:00
Ulrich Weigand
d9b4cff835 [PowerPC] Add assembler parser
This adds assembler parser support to the PowerPC back end.

The parser will run for any powerpc-*-* and powerpc64-*-* triples,
but was tested only on 64-bit Linux.  The supported syntax is
intended to be compatible with the GNU assembler.

The parser does not yet support all PowerPC instructions, but
it does support anything that is generated by LLVM itself.
There is no support for testing restricted instruction sets yet,
i.e. the parser will always accept any instructions it knows,
no matter what feature flags are given.

Instruction operands will be checked for validity and errors
generated.  (Error handling in general could still be improved.)

The patch adds a number of test cases to verify instruction
and operand encodings.  The tests currently cover all instructions
from the following PowerPC ISA v2.06 Book I facilities:
Branch, Fixed-point, Floating-Point, and Vector. 
Note that a number of these instructions are not yet supported
by the back end; they are marked with FIXME.

A number of follow-on check-ins will add extra features.  When
they are all included, LLVM passes all tests (including bootstrap)
when using clang -cc1as as the system assembler.

llvm-svn: 181050
2013-05-03 19:49:39 +00:00
Akira Hatanaka
326a351350 [mips] Test for r179873.
Patch by Zoran Jovanovic.

llvm-svn: 180804
2013-04-30 20:48:49 +00:00
Mihai Popa
e489a3a040 s tightens up the encoding description for ARM post-indexed ldr instructions. All instructions in this class have bit 4 cleared. It turns out that there is a test case for this, but it was marked XFAIL.
llvm-svn: 180778
2013-04-30 09:00:12 +00:00
Quentin Colombet
7a0d14f876 ARM: Fix encoding of hint instruction for Thumb.
"hint" space for Thumb actually overlaps the encoding space of the CPS
instruction. In actuality, hints can be defined as CPS instructions where imod
and M bits are all nil.

Handle decoding of permitted nop-compatible hints (i.e. nop, yield, wfi, wfe,
sev) in DecodeT2CPSInstruction.

This commit adds a proper diagnostic message for Imm0_4 and updates all tests.

Patch by Mihail Popa <Mihail.Popa@arm.com>.

llvm-svn: 180617
2013-04-26 17:54:54 +00:00
Jack Carter
02ade2a6d8 Mips assembler: .set reorder support
Mips have delayslots for certain instructions 
like jumps and branches. These are instructions 
that follow the branch or jump and are executed
before the jump or branch is completed.

Early Mips compilers could not cope with delayslots
and left them up to the assembler. The assembler would
fill the delayslots with the appropriate instruction,
usually just a nop to allow correct runtime behavior.

The default behavior for this is set with .set reorder.
To tell the assembler that you don't want it to mess with
the delayslot one used .set noreorder.

For backwards compatibility we need to support
.set reorder and have it be the default behavior in the 
assembler.

Our support for it is to insert a NOP directly after an
instruction with a delayslot when in .set reorder mode.

Contributer: Vladimir Medic
llvm-svn: 180584
2013-04-25 23:31:35 +00:00
Reid Kleckner
9efd3d0aa0 [mc-coff] Forward Linker Option flags into the .drectve section
Summary:
This is modelled on the Mach-O linker options implementation and should
support a Clang implementation of #pragma comment(lib/linker).

Reviewers: rafael

CC: llvm-commits

Differential Revision: http://llvm-reviews.chandlerc.com/D724

llvm-svn: 180569
2013-04-25 19:34:41 +00:00
Rafael Espindola
e426e8360c Fix section relocation for SECTIONREL32 with immediate offset.
Patch by Kai Nacke. This matches the gnu as output.

llvm-svn: 180568
2013-04-25 19:27:05 +00:00
Akira Hatanaka
1eb1207ce9 Test case for r180241.
llvm-svn: 180246
2013-04-25 02:22:07 +00:00
Akira Hatanaka
b42fb2ad92 Test case for r180238.
llvm-svn: 180245
2013-04-25 02:21:09 +00:00
Jack Carter
3fa12e632e Mips assembler: Add 64 bit testing for JAL
Contributer: Vladimir Medic
llvm-svn: 180220
2013-04-24 21:52:42 +00:00
Chad Rosier
6d8c79f647 Add test case for PR15779, which has previously been fixed.
llvm-svn: 180058
2013-04-22 22:30:01 +00:00
Peter Collingbourne
9c7b994acf COFF: Fix weak external aliases.
Differential Revision: http://llvm-reviews.chandlerc.com/D700

llvm-svn: 180034
2013-04-22 18:48:56 +00:00
Akira Hatanaka
99bbb9f89c [mips] Fix InstAlias of XOR and OR macros. Set EmitAlias flag and change
operand type to uimm16.

Patch by Vladimir Medic.

llvm-svn: 179872
2013-04-19 18:47:40 +00:00
Tim Northover
ec272f9cde ARM: Permit "sp" in ARM variant of STREXD instructions
Patch from Mihail Popa

llvm-svn: 179854
2013-04-19 15:44:32 +00:00
Tim Northover
5ae8bb1aa6 ARM: permit "sp" in ARM variants of MOVW/MOVT instructions
llvm-svn: 179847
2013-04-19 09:58:09 +00:00
Chad Rosier
9eb6febf54 [ms-inline asm] Apply the condition code mnemonic aliases to both the Intel and
AT&T dialect.  Test case for r179804 as well.
rdar://13674398 and PR13340.

llvm-svn: 179813
2013-04-18 23:16:12 +00:00
Akira Hatanaka
ae4353c654 [mips] DSP-ASE move from HI/LO register instructions.
llvm-svn: 179739
2013-04-18 00:52:44 +00:00
Peter Collingbourne
a0d11d0e11 Add support for subsections to the ELF assembler. Fixes PR8717.
Differential Revision: http://llvm-reviews.chandlerc.com/D598

llvm-svn: 179725
2013-04-17 21:18:16 +00:00
Chad Rosier
1efbeb717f [ms-inline asm] Add support for the minus unary operator. Previously, we were
unable to handle cases such as __asm mov eax, 8*-8.

This patch also attempts to simplify the state machine.  Further, the error
reporting has been improved.  Test cases included, but more will be added to
the clang side shortly.
rdar://13668445

llvm-svn: 179719
2013-04-17 21:01:45 +00:00
Quentin Colombet
c65f67e600 Fix treatment of ARM unallocated hint instructions.
The reference manual defines only 5 permitted values for the immediate field of the "hint" instruction:
1. nop (imm == 0)
2. yield (imm == 1)
3. wfe (imm == 2)
4. wfi (imm == 3)
5. sev (imm == 4)

Therefore, restrict the permitted values for the "hint" instruction to 0 through 4.

Patch by Mihail Popa <Mihail.Popa@arm.com>

llvm-svn: 179707
2013-04-17 18:46:12 +00:00
Jack Carter
e773ca9ec6 Mips assembler: Enable handling of nested expressions
This patch allows the Mips assembler to parse and emit nested 
expressions as instruction operands. It also extends the 
expansion of memory instructions when an offset is given as 
an expression. 

Contributer: Vladimir Medic
llvm-svn: 179657
2013-04-17 00:18:04 +00:00
Jim Grosbach
10785fcd52 ARM: Add VACLT and VACLE assembly aliases.
These are aliases for VACGT and VACGE, respectively, with the source
operands reversed.

rdar://13638090

llvm-svn: 179575
2013-04-15 22:42:50 +00:00
Jack Carter
6a3d1c59be Mips assembler: Explicit floating point condition register recognition.
This patch allows the assembler to recognize $fcc0 
as a valid register for conditional move instructions. 

Corresponding test cases have been added.

Contributer: Vladimir Medic
llvm-svn: 179567
2013-04-15 22:21:55 +00:00
Nico Rieck
3863b37eaf Use object file specific section type for initial text section
llvm-svn: 179494
2013-04-14 21:18:36 +00:00
Quentin Colombet
226206b401 ARM: Correct printing of pre-indexed operands.
According to the ARM reference manual, constant offsets are mandatory for pre-indexed addressing modes.
The MC disassembler was not obeying this when the offset is 0.
It was producing instructions like: str r0, [r1]!.
Correct syntax is: str r0, [r1, #0]!.

This change modifies the dumping of operands so that the offset is always printed, regardless of its value, when pre-indexed addressing mode is used.

Patch by Mihail Popa <Mihail.Popa@arm.com>

llvm-svn: 179398
2013-04-12 18:47:25 +00:00
Tim Northover
50af088d71 AArch64: use full triple for ELF tests
These tests rely specifically on the names of ELF relocations, let alone any
other detail. There's no way they'd work if LLVM was emitting something else by
default.

llvm-svn: 179376
2013-04-12 12:54:58 +00:00
Tim Northover
7d51031f92 AArch64: remove over-zealous use of CHECK-NEXT
It turns out some platforms (e.g. Windows) lay out their llvm-mc slightly
differently with extra newlines; there was no real reason for the test lines to
be consecutive, so this relaxes the FileCheck.

llvm-svn: 179375
2013-04-12 12:54:49 +00:00
Nico Rieck
1162bb7a1d Replace coff-/elf-dump with llvm-readobj
llvm-svn: 179361
2013-04-12 04:06:46 +00:00
Michael Liao
75c886a312 Add CLAC/STAC instruction encoding/decoding support
As these two instructions in AVX extension are privileged instructions for
special purpose, it's only expected to be used in inlined assembly.

llvm-svn: 179266
2013-04-11 04:52:28 +00:00
Nico Rieck
8e22855ea6 MC: Support COFF image-relative MCSymbolRefs
Add support for the COFF relocation types IMAGE_REL_I386_DIR32NB and
IMAGE_REL_AMD64_ADDR32NB for 32- and 64-bit respectively. These are
similar to normal 4-byte relocations except that they do not include
the base address of the image.

Image-relative relocations are used for debug information (32-bit) and
SEH unwind tables (64-bit).

A new MCSymbolRef variant called 'VK_COFF_IMGREL32' is introduced to
specify such relocations. For AT&T assembly, this variant can be accessed
using the symbol suffix '@imgrel'.

llvm-svn: 179240
2013-04-10 23:28:17 +00:00
Kay Tiong Khoo
5f12d15d44 fixed xsave, xsaveopt, xrstor mnemonics with intel syntax; added test cases
llvm-svn: 179223
2013-04-10 21:52:25 +00:00
Peter Collingbourne
672b843bca Use a scheme closer to that of GNU as when deciding the type of a
symbol with multiple .type declarations.

Differential Revision: http://llvm-reviews.chandlerc.com/D607

llvm-svn: 179184
2013-04-10 16:52:15 +00:00
Tim Northover
b82f729eb5 ARM: Make "SMC" instructions conditional on new TrustZone architecture feature.
These instructions aren't universally available, but depend on a specific
extension to the normal ARM architecture (rather than, say, v6/v7/...) so a new
feature is appropriate.

This also enables the feature by default on A-class cores which usually have
these extensions, to avoid breaking existing code and act as a sensible
default.

llvm-svn: 179171
2013-04-10 12:08:35 +00:00
Chad Rosier
59dbb08c9b [ms-inline asm] Add support for numeric displacement expressions in bracketed
memory operands.

Essentially, this layers an infix calculator on top of the parsing state
machine.  The scale on the index register is still expected to be an immediate

 __asm mov eax, [eax + ebx*4]

and will not work with more complex expressions.  For example,

 __asm mov eax, [eax + ebx*(2*2)]

The plus and minus binary operators assume the numeric value of a register is
zero so as to not change the displacement.  Register operands should never
be an operand for a multiply or divide operation; the scale*indexreg
expression is always replaced with a zero on the operand stack to prevent
such a case.
rdar://13521380

llvm-svn: 178881
2013-04-05 16:28:55 +00:00
Richard Osborne
25a2bd3084 [XCore] Add bru instruction.
llvm-svn: 178783
2013-04-04 20:05:35 +00:00
Richard Osborne
2eabe25672 [XCore] The RRegs register class is a superset of GRRegs.
At the time when the XCore backend was added there were some issues with
with overlapping register classes but these all seem to be fixed now.
Describing the register classes correctly allow us to get rid of a
codegen only instruction (LDAWSP_lru6_RRegs) and it means we can
disassemble ru6 instructions that use registers above r11.

llvm-svn: 178782
2013-04-04 19:57:46 +00:00
Rafael Espindola
af01832c73 Implement the "mips endian" for r_info.
Normally r_info is just a 32 of 64 bit number matching the endian of the rest
of the file. Unfortunately, mips 64 bit little endian is special: The top 32
bits are a little endian number and the following 32 are a big endian one.

llvm-svn: 178694
2013-04-03 21:02:51 +00:00
Richard Osborne
8c4177b262 [XCore] Check disassembly of the st8 instruction.
llvm-svn: 178689
2013-04-03 20:07:11 +00:00
Richard Osborne
a7413cf3e7 [XCore] Update disassembler test to improve coverage of the instructions.
Previously some instructions were unintentionally covered twice and
others were not covered at all.

llvm-svn: 178688
2013-04-03 20:07:06 +00:00
Eric Christopher
df46cef31b Implements low-level object file format specific output for COFF and
ELF with support for:

- File headers
- Section headers + data
- Relocations
- Symbols
- Unwind data (only COFF/Win64)

The output format follows a few rules:
- Values are almost always output one per line (as elf-dump/coff-dump already do). - Many values are translated to something readable (like enum names), with the raw value in parentheses.
- Hex numbers are output in uppercase, prefixed with "0x".
- Flags are sorted alphabetically.
- Lists and groups are always delimited.

Example output:
---------- snip ----------
Sections [
  Section {
    Index: 1
    Name: .text (5)
    Type: SHT_PROGBITS (0x1)
    Flags [ (0x6)
      SHF_ALLOC (0x2)
      SHF_EXECINSTR (0x4)
    ]
    Address: 0x0
    Offset: 0x40
    Size: 33
    Link: 0
    Info: 0
    AddressAlignment: 16
    EntrySize: 0
    Relocations [
      0x6 R_386_32 .rodata.str1.1 0x0
      0xB R_386_PC32 puts 0x0
      0x12 R_386_32 .rodata.str1.1 0x0
      0x17 R_386_PC32 puts 0x0
    ]
    SectionData (
      0000: 83EC04C7 04240000 0000E8FC FFFFFFC7  |.....$..........|
      0010: 04240600 0000E8FC FFFFFF31 C083C404  |.$.........1....|
      0020: C3                                   |.|
    )
  }
]
---------- snip ----------

Relocations and symbols can be output standalone or together with the section header as displayed in the example.
This feature set supports all tests in test/MC/COFF and test/MC/ELF (and I suspect all additional tests using elf-dump), making elf-dump and coff-dump deprecated.

Patch by Nico Rieck!

llvm-svn: 178679
2013-04-03 18:31:38 +00:00
Tim Northover
2550df2b22 AArch64: implement ETMv4 trace system registers.
llvm-svn: 178637
2013-04-03 12:31:29 +00:00
Rafael Espindola
de2bc5c06e Fix the fde encoding used by mips to match gas.
This finally fixes the encoding. The patch also
* Removes eh-frame.ll. It was an unnecessary .ll to .o test that was checking
  the wrong value.
* Merge fde-reloc.s and eh-frame.s into a single test, since the only difference
  was the run lines.
* Don't blindly test the content of the entire .eh_frame section. It makes it
  hard to anyone actually fixing a bug and hitting a difference in a binary
  blob. Instead, use a CHECK for each field and document what is being checked.

llvm-svn: 178615
2013-04-03 03:13:19 +00:00
Jack Carter
b48d003b7d Mips direct object exception handling regression
Revision 177141 caused a regression in all but
mips64 little endian. That is because none of the
other Mips targets had test cases checking the 
contents of the .eh_frame section. This patch fixes
both the llvm code and adds an assembler test case 
to include the current 4 flavors.

The test cases unfortunately rely on llvm-objdump. A
preferable method would be to use a pretty printer output
such as what readelf -wf <elf_file> would give.

I also changed the name of the test case to correct a typo.

llvm-svn: 178506
2013-04-01 21:55:15 +00:00
Jack Carter
ab230573a8 [Mips Assembler] Add support for OR macro with imediate opperand
Mips assembler supports macros that allows the OR instruction 
to have an immediate parameter. This patch adds an instruction 
alias that converts this macro into a Mips ORI instruction. 

Contributer: Vladimir Medic
llvm-svn: 178316
2013-03-28 23:45:13 +00:00
Michael Liao
427149cbcf Add support of RDSEED defined in AVX2 extension
llvm-svn: 178314
2013-03-28 23:41:26 +00:00
Jack Carter
1e744ec264 [Mips Assembler] Add alias definitions for jal
Mips assembler allows following to be used as aliased instructions:
jal $rs for jalr $rs
jal $rd,$rd for jalr $rd,$rs

This patch provides alias definitions in td files and test cases to show the usage.

Contributer: Vladimir Medic
llvm-svn: 178304
2013-03-28 23:02:21 +00:00
Gordon Keiser
862f5debbb Fix issue with disassembler decoding CBZ/CBNZ immediates as negatives when the upper bit is set.
They should always be zero-extended, not sign extended.  Added test case.

llvm-svn: 178275
2013-03-28 19:22:28 +00:00
Rafael Espindola
a76bf0485a Move test since it depends on the X86 backend.
llvm-svn: 178249
2013-03-28 17:01:28 +00:00
Tim Northover
d8cb0fa827 AArch64: implement GICv3 system registers
llvm-svn: 178236
2013-03-28 14:30:46 +00:00
Michael Gottesman
5cfa6d5102 Revert "Updated ELF relocation test for .eh_frame section"
This reverts commit c8d65364223a04b179958a50a4bf0f89b21dd7d2.

This broke a bunch of the buildbots.

llvm-svn: 178222
2013-03-28 05:14:26 +00:00
Jack Carter
8ed2f31d8e Updated ELF relocation test for .eh_frame section
Made sure we were looking a correct section
Added Mips32/64 as an extra check
Updated llvm-objdump to generate symbolic info for Mips relocations

llvm-svn: 178190
2013-03-27 22:58:49 +00:00
Chad Rosier
09bc7a9c8d [ms-inline asm] Add support of imm displacement before bracketed memory
expression.  Specifically, this syntax:

 ImmDisp [ BaseReg + Scale*IndexReg + Disp ] 

We don't currently support:

 ImmDisp [ Symbol ]

rdar://13518671

llvm-svn: 178186
2013-03-27 21:49:56 +00:00